| OID symbolic | OID numeric | Type | Access | Description |
|---|
| prvtProxyManager | 1.3.6.1.4.1.738.1.6.6 | | | The MIB module for management of the PRVT-PROXY-MANAGER product. |
| prvtProxyManNotifications | 1.3.6.1.4.1.738.1.6.6.0 | | | |
| NTF prvtProxyManagerNewDevice | 1.3.6.1.4.1.738.1.6.6.0.1 | | | This notification is triggered, when a new managed device is descovered
and added in the proxy manager's list |
| NTF prvtProxyManagerRemovedDevice | 1.3.6.1.4.1.738.1.6.6.0.2 | | | This notification is triggered, when a managed device is removed from
the proxy manager's list |
| NTF prvtProxyManagerUnauthenticatedDevice | 1.3.6.1.4.1.738.1.6.6.0.3 | | | This notification is triggered, when a managed device failed to be authenticated from
the proxy manager's list |
| prvtProxyManObjects | 1.3.6.1.4.1.738.1.6.6.1 | | | |
| MAC prvtProxyManDeviceAddress | 1.3.6.1.4.1.738.1.6.6.1.1 | MacAddress | accessible-for-notify | The object represents the discovered device address.
It is used only for topology change notifications. |
| prvtProxyManConfigTable | 1.3.6.1.4.1.738.1.6.6.1.2 | | not-accessible | The table of containing the global configuration of the Proxy Manager instance. |
| prvtProxyManConfigEntry | 1.3.6.1.4.1.738.1.6.6.1.2.1 | | not-accessible | Each entry represents configuration for a ProxyManager instance. |
| U32 prvtProxyManIndex | 1.3.6.1.4.1.738.1.6.6.1.2.1.1 | Unsigned32 | not-accessible | The index of this prvtProxyManConfigEntry. This is the
instance index of the ProxyManager.
Currently only one instance is supported. |
| PRV prvtProxyManStatus | 1.3.6.1.4.1.738.1.6.6.1.2.1.2 | PrvtProxyManStates | read-write | The object indicates whether the Proxy manger is enabled(1)
or disabled(2). In order to enable the Proxy Manager,
prvtProxyManIpRangeEnd, prvtProxyManIpRangeStart,
prvtProxyManIpMask, prvtProxyManIpAddr, prvtProxyManVlan, must
be correctly set and consistent.
In order to enable the manager prvtProxyManRowStatus should be active. |
| PRV prvtProxyManAutoMapMode | 1.3.6.1.4.1.738.1.6.6.1.2.1.3 | PrvtProxyManStates | read-write | The object indicates whether the devices will be configured
automatically - enabled(1) or manually - disabled(2).
If the object is set to disable, the configuration can be
managed via prvtProxyManMappingTable |
| U32 prvtProxyManVlan | 1.3.6.1.4.1.738.1.6.6.1.2.1.4 | Unsigned32 | read-write | The vlan of the network specified for proxy managment.
This field is mandatory for the Proxy Manager in order
to work correctly |
| IP prvtProxyManIpAddr | 1.3.6.1.4.1.738.1.6.6.1.2.1.5 | IpAddress | read-write | The ip address of the device manged by the Proxy
Manager.
This field is mandatory for the Proxy Manager in order
to work correctly |
| U32 prvtProxyManIpMask | 1.3.6.1.4.1.738.1.6.6.1.2.1.6 | Unsigned32 | read-write | The bit mask of the network where the proxy manager resides.
This field is mandatory for the Proxy Manager in order
to work correctly |
| IP prvtProxyManIpRangeStart | 1.3.6.1.4.1.738.1.6.6.1.2.1.7 | IpAddress | read-write | The start of the ip address range, used by DHCP to provide
ip addresses for the discuvered devices
This field is mandatory for the Proxy Manager in order
to work correctly |
| IP prvtProxyManIpRangeEnd | 1.3.6.1.4.1.738.1.6.6.1.2.1.8 | IpAddress | read-write | The end of the ip address range, used by DHCP to provide
ip addresses for the discuvered devices
This field is mandatory for the Proxy Manager in order
to work correctly |
| U32 prvtProxyManLeasePeriod | 1.3.6.1.4.1.738.1.6.6.1.2.1.9 | Unsigned32 | read-write | The period for which the mapped devices are available in
the proxy manager. After it expire, the mapped device
can request new lease again. Valid range is seconds. Default value is 300. |
| ROW prvtProxyManRowStatus | 1.3.6.1.4.1.738.1.6.6.1.2.1.10 | RowStatus | read-create | This object indicates the state of the configuration entry. It
is read-only and can not be used to create or destroy or manually change
the state. Only one configuration entry is supported.
The only valid values are:
- notReady(3) - the ProxyManger is not correctly configured and there are some field inconsistencies.
- acitive(1) - the ProxyManger is configured and the proxy manager is ready to be enabled.
The objects which are checked for consistency are:
prvtProxyManIpRangeEnd - the ip range should be in the network, defined by the ip address/mask objects
prvtProxyManIpRangeStart - the ip range should be in the network defined by the ip address/mask objects
prvtProxyManIpMask - shoudl be valid ip mask
prvtProxyManIpAddr - should be valid ip address.
prvtProxyManVlan - the vlan should exists |
| PRV prvtProxySecurityEnabled | 1.3.6.1.4.1.738.1.6.6.1.2.1.11 | PrvtProxySecurity | read-write | The attribute is used to specify the proxy security, The default is securityDisabled(1). |
| PRV prvtProxyAcceptInforms | 1.3.6.1.4.1.738.1.6.6.1.2.1.12 | PrvtProxyAcceptInformsType | read-write | The attribute is used to specify the accept policy for DHCP Informs messaged. The default if informsDisabled(1). |
| prvtProxyManProtoTable | 1.3.6.1.4.1.738.1.6.6.1.3 | | not-accessible | The table of containing all supported protocols,
which will be processed by an active ProxyManager
instance
This table is read-only. |
| prvtProxyManProtoEntry | 1.3.6.1.4.1.738.1.6.6.1.3.1 | | not-accessible | Each entry represents a hardcoded protocol supported by Proxy Manager. |
| PRV prvtProxyManProtoIndex | 1.3.6.1.4.1.738.1.6.6.1.3.1.1 | PrvtProxyManProtocols | not-accessible | The index of prvtProxyManProtoTable. It is an enumeration
representing all supported protocols by Proxy Manager |
| I32 prvtProxyManProtoSvcPort | 1.3.6.1.4.1.738.1.6.6.1.3.1.2 | Integer32 | read-only | The object represents the number of the port for the supported standard protocol. |
| PRV prvtProxyManProtoSvcPortType | 1.3.6.1.4.1.738.1.6.6.1.3.1.3 | PrvtProxyManPortTypes | read-only | The object represents the type of the managed standard port in the
transport porotocol. |
| I32 prvtProxyManProtoSrcPort | 1.3.6.1.4.1.738.1.6.6.1.3.1.4 | Integer32 | read-only | TBD |
| PRV prvtProxyManProtoDirection | 1.3.6.1.4.1.738.1.6.6.1.3.1.5 | PrvtProxyManDirection | read-only | The object identifies direction of the traffic flow (noDirection/inbound/outbound). |
| PRV prvtProxyManProtoStatus | 1.3.6.1.4.1.738.1.6.6.1.3.1.6 | PrvtProxyManStates | read-write | This object indicates whether the protocol is to be
managed by Proxy manager - enable(1) or not - disable(2). |
| prvtProxyManMappingTable | 1.3.6.1.4.1.738.1.6.6.1.4 | | not-accessible | The table show the mapping between the deiscoverd devices and the ports they are mapped by the proxy manager.
It is also used to create mannual mappings between devices and ports if the prvtProxyManAutoMapMode is disabled |
| prvtProxyManMappingEntry | 1.3.6.1.4.1.738.1.6.6.1.4.1 | | not-accessible | Each entry represents a mapped device to a port. |
| U32 prvtProxyManMappingDevice | 1.3.6.1.4.1.738.1.6.6.1.4.1.1 | Unsigned32 | not-accessible | The object represents the id of the deiscovered device in the LAN.
It is index in the prvtProxyManMappingTable |
| U32 prvtProxyManMappingIndex | 1.3.6.1.4.1.738.1.6.6.1.4.1.2 | Unsigned32 | not-accessible | The object represents the index of the mapping entry.
It is unique per device and is index in the prvtProxyManMappingTable |
| PRV prvtProxyManMappingProto | 1.3.6.1.4.1.738.1.6.6.1.4.1.3 | PrvtProxyManProtocols | not-accessible | The object represents the protocol, which will be processed.
It is index in prvtProxyManMappingTable. |
| PRV prvtProxyManMappingDirection | 1.3.6.1.4.1.738.1.6.6.1.4.1.4 | PrvtProxyManDirection | read-only | The object identifies the traffic flow direction.(inbound/outbound). |
| I32 prvtProxyManMappingGlobalPort | 1.3.6.1.4.1.738.1.6.6.1.4.1.5 | Integer32 | read-write | TBD |
| I32 prvtProxyManMappingLocalSrcPort | 1.3.6.1.4.1.738.1.6.6.1.4.1.6 | Integer32 | read-write | TBD |
| I32 prvtProxyManMappingLocalDstPort | 1.3.6.1.4.1.738.1.6.6.1.4.1.7 | Integer32 | read-write | TBD |
| ROW prvtProxyManMappingRowStatus | 1.3.6.1.4.1.738.1.6.6.1.4.1.8 | RowStatus | read-create | Indicates the state of the mapping entry.
- notReady(3) - the mapping entry is not configured yet
- notInService(3) - the mapping entry is configured but the configuration is not applied yet
- acitive(3) - the mapping entry is configured and the configuration is applied
The objects which need to be configured in order
to apply the cinfiguration are:
prvtProxyManMappingMAC
prvtProxyManMappingPort |
| MAC prvtProxyManMappingMAC | 1.3.6.1.4.1.738.1.6.6.1.4.1.9 | MacAddress | read-write | The mac address of the managed device.
This field is manadatory |
| I32 prvtProxyManMappingIfIndex | 1.3.6.1.4.1.738.1.6.6.1.4.1.10 | Integer32 | read-only | This object shows the ifIndex associated with the managed device. |
| PRV prvtProxyManMappingAuthenticated | 1.3.6.1.4.1.738.1.6.6.1.4.1.11 | PrvtProxyManAuthentication | read-only | This object shows the authenticated state of the managed device. |
