PRVT-MPLS-LDP-MIB :: mplsLdpEntityHopCountLimit

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › PRVT-MPLS-LDP-MIB › mplsLdpEntityHopCountLimit

mplsLdpEntityHopCountLimit

Module: PRVT-MPLS-LDP-MIB

OID (symbolic): PRVT-MPLS-LDP-MIB::mplsLdpEntityHopCountLimit

OID (numeric): 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.15

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: If the value of this object is 0 (zero), then Loop Detection using Hop Counters is disabled.

If the value of this object is greater than 0 (zero) then Loop Detection using Hop Counters is enabled, and this object specifies this Entity's maximum allowable value for the Hop Count. Also, the value of the object mplsLdpLsrLoopDetectionCapable must be set to either 'hopCount(3)' or 'hopCountAndPathVector(5)' if this object has a value greater than 0 (zero), otherwise it is ignored.

What is mplsLdpEntityHopCountLimit?

Sets the maximum hop count this entity enforces for LDP's hop-count based loop detection; a value of 0 disables that check, while a positive value both enables it and defines the ceiling before a label request is treated as looping. Like the path-vector limit, this only has effect when the LSR's loop-detection capability includes the hopCount method.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.15
snmpwalk -v2c -c public <target> PRVT-MPLS-LDP-MIB::mplsLdpEntityHopCountLimit

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.15.1
snmpget -v2c -c public <target> PRVT-MPLS-LDP-MIB::mplsLdpEntityHopCountLimit.1

Start monitoring BATM Advanced Communications MPLS router/switch (LDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PRVT-MPLS-LDP-MIB::mplsLdpEntityHopCountLimit OID value, configure state conditions and alerts, and monitor any BATM Advanced Communications MPLS router/switch (LDP) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.738privateVendorOIDPRIV-VENDORDEF-MIB
1.3.6.1.4.1.738.1prvt_productsPRVT-SWITCH-MIB
1.3.6.1.4.1.738.1.6ipSwitchPRVT-SWITCH-MIB
1.3.6.1.4.1.738.1.6.5mplsPRVT-CR-LDP-MIB
Numeric OIDNameModule
1.3.6.1.4.1.738.1.6.5.1mplsLdpStdMIBPRVT-MPLS-LDP-MIB
1.3.6.1.4.1.738.1.6.5.1.1mplsLdpObjectsPRVT-MPLS-LDP-MIB
1.3.6.1.4.1.738.1.6.5.1.1.2mplsLdpEntityObjectsPRVT-MPLS-LDP-MIB
1.3.6.1.4.1.738.1.6.5.1.1.2.1mplsLdpEntityTablePRVT-MPLS-LDP-MIB
1.3.6.1.4.1.738.1.6.5.1.1.2.1.1mplsLdpEntityEntryPRVT-MPLS-LDP-MIB
1.3.6.1.4.1.738.1.6.5.1.1.2.1.1.15mplsLdpEntityHopCountLimitPRVT-MPLS-LDP-MIB