PRIVATE-FEL2Mod-SW24-MIB

All MIBs › PRIVATE-FEL2Mod-SW24-MIB

Organization: xxx Tech Corp.

Last Updated: 2006-07-03

Category: System Management

Description: Manages xxx Tech Corp. FEL2 module SW24 switch port configuration, status, and statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PRIVATE-FEL2Mod-SW24-MIB?

PRIVATE-FEL2Mod-SW24-MIB is a vendor-specific enterprise MIB (the vendor is recorded only generically as "xxx Tech." in the source) for the FEL2Mod SW24 embedded Layer 2 switch module product line. It exposes device inventory and configuration data such as BIOS, firmware, hardware and mechanical revision levels, serial number and MAC address, RAM/Flash sizing, DHCP and IP configuration, and per-port switch data. It is notably useful for software/hardware status monitoring: firmware and hardware version objects support compliance and patch-level auditing, the serial number and MAC address support asset tracking, and feL2ModSW24Reboot exposes remote reboot control. No standard MIB dependency is evident from the fragment available; it appears to be a largely self-contained enterprise module. It is typically deployed on embedded Layer 2 switch modules integrated as a card inside larger OEM equipment. Engineers can download the PRIVATE-FEL2Mod-SW24-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PRIVATE-FEL2Mod-SW24-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

xxx Tech Corp FEL2Mod SW24 embedded Layer 2 switch module

Monitoring Examples

feL2ModSW24BiosVsersion, feL2ModSW24FirmwareVersion, and feL2ModSW24HardwareVersion together let an admin confirm that all deployed SW24 modules are running an expected firmware baseline before a security patch rollout; feL2ModSW24SerialNumber and feL2ModSW24HostMacAddress support asset inventory, while feL2ModSW24RamSize and feL2ModSW24FlashSize expose available memory a technician would check before pushing a new firmware image. feL2ModSW24Reboot allows triggering or observing a remote reboot of the module.

What Can Be Monitored

firmware/BIOS/hardware version
serial number
MAC address
RAM/Flash size
DHCP/IP configuration
reboot state

Imported Objects

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
privatetech	1.3.6.1.4.1.5205			The MIB module is for xxx Tech.
switch	1.3.6.1.4.1.5205.2
feL2ModSW24ProductID	1.3.6.1.4.1.5205.2.19
feL2ModSW24Produces	1.3.6.1.4.1.5205.2.19.1
feL2ModSW24System	1.3.6.1.4.1.5205.2.19.1.1
feL2ModSW24CommonSys	1.3.6.1.4.1.5205.2.19.1.1.1
INT feL2ModSW24Reboot	1.3.6.1.4.1.5205.2.19.1.1.1.1	INTEGER	read-write	Reboot the system. Get this OID always return zero. 0 - do nothing 1 - Reboot without saving start 2 - Reboot with saving start
STR feL2ModSW24BiosVsersion	1.3.6.1.4.1.5205.2.19.1.1.1.2	DisplayString	read-only	Get the BIOS version of the system.
STR feL2ModSW24FirmwareVersion	1.3.6.1.4.1.5205.2.19.1.1.1.3	DisplayString	read-only	Get the firmware version of the system.
STR feL2ModSW24HardwareVersion	1.3.6.1.4.1.5205.2.19.1.1.1.4	DisplayString	read-only	Get the hardware version of the system.
STR feL2ModSW24MechanicalVersion	1.3.6.1.4.1.5205.2.19.1.1.1.5	DisplayString	read-only	Get the mechanical version of the system.
STR feL2ModSW24SerialNumber	1.3.6.1.4.1.5205.2.19.1.1.1.6	DisplayString	read-only	Get the Serial number of the system.
STR feL2ModSW24HostMacAddress	1.3.6.1.4.1.5205.2.19.1.1.1.7	DisplayString	read-only	Get the MAC address of the system.
STR feL2ModSW24DevicePort	1.3.6.1.4.1.5205.2.19.1.1.1.8	DisplayString	read-only	Get the quantity of ports that this system owns now.
STR feL2ModSW24RamSize	1.3.6.1.4.1.5205.2.19.1.1.1.9	DisplayString	read-only	Get the RAM size of the system.
STR feL2ModSW24FlashSize	1.3.6.1.4.1.5205.2.19.1.1.1.10	DisplayString	read-only	Get the flash size of the system.
feL2ModSW24IP	1.3.6.1.4.1.5205.2.19.1.1.2
INT feL2ModSW24DhcpSetting	1.3.6.1.4.1.5205.2.19.1.1.2.1	INTEGER	read-write	Get/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enable
IP feL2ModSW24IPAddress	1.3.6.1.4.1.5205.2.19.1.1.2.2	IpAddress	read-write	Get/Set the IP address of the system. You can't set this OID if DHCP status is enabled.
IP feL2ModSW24NetMask	1.3.6.1.4.1.5205.2.19.1.1.2.3	IpAddress	read-write	Get/Set the subnet mask of the system. You can't set this OID if DHCP status is enabled.
IP feL2ModSW24DefaultGateway	1.3.6.1.4.1.5205.2.19.1.1.2.4	IpAddress	read-write	Get/Set the default gateway of the system. You can't set this OID if DHCP status is enabled.
INT feL2ModSW24DnsSetting	1.3.6.1.4.1.5205.2.19.1.1.2.5	INTEGER	read-write	Get/Set the source of DNS server. You can't set this OID if DHCP status is disabled. 0 - manual, the DNS server is from manual setting 1 - auto, the DNS server is assigned by DHCP server.
IP feL2ModSW24DnsServer	1.3.6.1.4.1.5205.2.19.1.1.2.6	IpAddress	read-write	Get/Set the DNS server of the system.
feL2ModSW24Time	1.3.6.1.4.1.5205.2.19.1.1.3
STR feL2ModSW24SystemCurrentTime	1.3.6.1.4.1.5205.2.19.1.1.3.1	DisplayString	read-only	Get the current time of the system.
STR feL2ModSW24ManualTimeSetting	1.3.6.1.4.1.5205.2.19.1.1.3.2	DisplayString	read-write	Get/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25 . The value range: Year : 2000 - 2036, Mouth : 1 - 12, Day : 1 - 31, Hour : 0 - 23, Minute : 0 - 59, Sec : 0 - 59.
STR feL2ModSW24NTPServer	1.3.6.1.4.1.5205.2.19.1.1.3.3	DisplayString	read-write	Get/Set the NTP Time Server. You can use the IP address or domain name.
INT feL2ModSW24NTPTimeZone	1.3.6.1.4.1.5205.2.19.1.1.3.4	INTEGER	read-write	Get/Set the NTP Time Zone. The value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - GMT -07:00, -6 - GMT -06:00, -5 - GMT -05:00, -4 - GMT -04:00, -3 - GMT -03:00, -2 - GMT -02:00, -1 - GMT -01:00, 0 - GMT +00:00, 1 - GMT +01:00, 2 - GMT +02:00, 3 - GMT +03:00, 4 - GMT +04:00, 5 - GMT +05:00, 6 - GMT +06:00, 7 - GMT +07:00, 8 - GMT +08:00, 9 - GMT +09:00, 10 - GMT +10:00, 11 - GMT +11:00, 12 - GMT +12:00, 13 - GMT +13:00.
INT feL2ModSW24NTPTimeSync	1.3.6.1.4.1.5205.2.19.1.1.3.5	INTEGER	read-write	Sync time from NTP Server. Get this OID always return zero. Set the Time Server and Time Zone before doing time sync. Notice that time server must be correct! The value range (0\|1): 1 - sync. 0 - do nothing.
INT feL2ModSW24DaylightSavingTime	1.3.6.1.4.1.5205.2.19.1.1.3.6	INTEGER	read-write	Get/Set the daylight saving time. The value range is between -5 and 5. (Unit: hour)
STR feL2ModSW24DaylightStartTime	1.3.6.1.4.1.5205.2.19.1.1.3.7	DisplayString	read-write	Get/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 10/01/00 month: 01~12, day: 01~31, hour: 00~23 .
STR feL2ModSW24DaylightEndTime	1.3.6.1.4.1.5205.2.19.1.1.3.8	DisplayString	read-write	Get/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 04/01/00 month: 01~12, day: 01~31, hour: 00~23 .
feL2ModSW24Account	1.3.6.1.4.1.5205.2.19.1.1.4
INT feL2ModSW24AccountNumber	1.3.6.1.4.1.5205.2.19.1.1.4.1	INTEGER	read-only	Get the current account number(s) of the system.
feL2ModSW24AccountTable	1.3.6.1.4.1.5205.2.19.1.1.4.2		not-accessible	This is a list of FEL2ModSW24AccountEntry. The numbers of entries are given by the value of feL2ModSW24AccountNumber.
feL2ModSW24AccountEntry	1.3.6.1.4.1.5205.2.19.1.1.4.2.1		not-accessible	This is the Entry(s) for account information.
INT feL2ModSW24AccountIndex	1.3.6.1.4.1.5205.2.19.1.1.4.2.1.1	INTEGER	read-only	This is the index of the account entry.
STR feL2ModSW24AccountAuthorization	1.3.6.1.4.1.5205.2.19.1.1.4.2.1.2	DisplayString	read-only	This is the authorization of the account entry.
STR feL2ModSW24AccountName	1.3.6.1.4.1.5205.2.19.1.1.4.2.1.3	DisplayString	read-write	This is the username of the account entry.
STR feL2ModSW24AccountPassword	1.3.6.1.4.1.5205.2.19.1.1.4.2.1.4	DisplayString	read-write	This is the password of the account entry. The return value is always '********'.
STR feL2ModSW24AccountAddName	1.3.6.1.4.1.5205.2.19.1.1.4.3	DisplayString	read-write	This is the account name for adding operation.
STR feL2ModSW24AccountAddPassword	1.3.6.1.4.1.5205.2.19.1.1.4.4	DisplayString	read-write	This is the account password for adding operation. The return value is always '********'.
INT feL2ModSW24DoAccountAdd	1.3.6.1.4.1.5205.2.19.1.1.4.5	INTEGER	read-write	Add account name. OID feL2ModSW24AccountAddName and feL2ModSW24AccountAddPassword must be filled first. Get this OID always return zero. 1 - add account. 0 - do nothing.
INT feL2ModSW24AccountDel	1.3.6.1.4.1.5205.2.19.1.1.4.6	INTEGER	read-write	Delete account. The value is valid feL2ModSW24AccountIndex(Can't delete administrator).
feL2ModSW24Snmp	1.3.6.1.4.1.5205.2.19.1.2
STR feL2ModSW24GetCommunity	1.3.6.1.4.1.5205.2.19.1.2.1	DisplayString	read-write	Get/Set the get-community of the SNMP.
STR feL2ModSW24SetCommunity	1.3.6.1.4.1.5205.2.19.1.2.2	DisplayString	read-write	Get/Set the set-community of the SNMP.
INT feL2ModSW24TrapHostNumber	1.3.6.1.4.1.5205.2.19.1.2.3	INTEGER	read-only	Get the number of trap hosts.
feL2ModSW24TrapHostTable	1.3.6.1.4.1.5205.2.19.1.2.4		not-accessible	A list of trap host entry. The numbers of entries are given by the value of feL2ModSW24TrapHostNumber.
feL2ModSW24TrapHostEntry	1.3.6.1.4.1.5205.2.19.1.2.4.1		not-accessible	This is the entry information for trap host.
INT feL2ModSW24TrapHostIndex	1.3.6.1.4.1.5205.2.19.1.2.4.1.1	INTEGER	read-only	The index of the trap host entry.
IP feL2ModSW24TrapHostIP	1.3.6.1.4.1.5205.2.19.1.2.4.1.2	IpAddress	read-write	This is the IP of the trap host.
INT feL2ModSW24TrapHostPort	1.3.6.1.4.1.5205.2.19.1.2.4.1.3	INTEGER	read-write	This is the receiving-port number of the trap host.
STR feL2ModSW24TrapHostCommunity	1.3.6.1.4.1.5205.2.19.1.2.4.1.4	DisplayString	read-write	The community name for the trap PDU.
feL2ModSW24Alarm	1.3.6.1.4.1.5205.2.19.1.3
feL2ModSW24Event	1.3.6.1.4.1.5205.2.19.1.3.1
INT feL2ModSW24EventNumber	1.3.6.1.4.1.5205.2.19.1.3.1.1	INTEGER	read-only	Get the total number of alarm events.
feL2ModSW24EventTable	1.3.6.1.4.1.5205.2.19.1.3.1.2		not-accessible	A list of alarm event entry. The numbers of entries are given by the value of feL2ModSW24EventNumber.
feL2ModSW24EventEntry	1.3.6.1.4.1.5205.2.19.1.3.1.2.1		not-accessible	This is the entry information for alarm event.
INT feL2ModSW24EventIndex	1.3.6.1.4.1.5205.2.19.1.3.1.2.1.1	INTEGER	read-only	This is the index of the alarm event entry.
STR feL2ModSW24EventName	1.3.6.1.4.1.5205.2.19.1.3.1.2.1.2	DisplayString	read-only	This is the alarm event name.
INT feL2ModSW24EventSendEmail	1.3.6.1.4.1.5205.2.19.1.3.1.2.1.3	INTEGER	read-write	Send email when alarm event is triggered.
INT feL2ModSW24EventSendSMS	1.3.6.1.4.1.5205.2.19.1.3.1.2.1.4	INTEGER	read-write	Send SMS when alarm event is triggered.
INT feL2ModSW24EventSendTrap	1.3.6.1.4.1.5205.2.19.1.3.1.2.1.5	INTEGER	read-write	Send trap when alarm event is triggered.
feL2ModSW24Email	1.3.6.1.4.1.5205.2.19.1.3.2
STR feL2ModSW24EmailServer	1.3.6.1.4.1.5205.2.19.1.3.2.1	DisplayString	read-write	This is the SMTP server for alarm event.
STR feL2ModSW24EmailUsername	1.3.6.1.4.1.5205.2.19.1.3.2.2	DisplayString	read-write	This is the Username of SMTP server.
STR feL2ModSW24EmailPassword	1.3.6.1.4.1.5205.2.19.1.3.2.3	DisplayString	read-write	This is the User Password of SMTP server.
INT feL2ModSW24EmailUserNumber	1.3.6.1.4.1.5205.2.19.1.3.2.4	INTEGER	read-only	The number of the email users that you want to send the alarm notification.
feL2ModSW24EmailUserTable	1.3.6.1.4.1.5205.2.19.1.3.2.5		not-accessible	This is a list of email user entry. The numbers of entries are given by the value of feL2ModSW24EmailUserNumber.
feL2ModSW24EmailUserEntry	1.3.6.1.4.1.5205.2.19.1.3.2.5.1		not-accessible	This is the Entry information for email user entry.
INT feL2ModSW24EmailUserIndex	1.3.6.1.4.1.5205.2.19.1.3.2.5.1.1	INTEGER	read-only	This is the index of the email user entry.
STR feL2ModSW24EmailUserAddress	1.3.6.1.4.1.5205.2.19.1.3.2.5.1.2	DisplayString	read-write	This is the email address of the email user entry.
feL2ModSW24SMS	1.3.6.1.4.1.5205.2.19.1.3.3
STR feL2ModSW24SMSServer	1.3.6.1.4.1.5205.2.19.1.3.3.1	DisplayString	read-write	This is the SMS server for alarm event.
STR feL2ModSW24SMSUsername	1.3.6.1.4.1.5205.2.19.1.3.3.2	DisplayString	read-write	This is the Username of SMS server.
STR feL2ModSW24SMSPassword	1.3.6.1.4.1.5205.2.19.1.3.3.3	DisplayString	read-write	This is the Password of SMS server.
INT feL2ModSW24SMSUserNumber	1.3.6.1.4.1.5205.2.19.1.3.3.4	INTEGER	read-only	The number of the SMS users that you want to send the alarm notification.
feL2ModSW24SMSUserTable	1.3.6.1.4.1.5205.2.19.1.3.3.5		not-accessible	This is a list of SMS user entry. The numbers of entries are given by the value of feL2ModSW24SMSUserNumber.
feL2ModSW24SMSUserEntry	1.3.6.1.4.1.5205.2.19.1.3.3.5.1		not-accessible	This is the Entry information for SMS user entry.
INT feL2ModSW24SMSUserIndex	1.3.6.1.4.1.5205.2.19.1.3.3.5.1.1	INTEGER	read-only	This is the index of the SMS user entry.
STR feL2ModSW24SMSUserMobilePhone	1.3.6.1.4.1.5205.2.19.1.3.3.5.1.2	DisplayString	read-write	The SMS phone number of the SMS user entry.
feL2ModSW24Tftp	1.3.6.1.4.1.5205.2.19.1.4
IP feL2ModSW24TftpServer	1.3.6.1.4.1.5205.2.19.1.4.1	IpAddress	read-write	Get/Set the tftp server.
feL2ModSW24Configuration	1.3.6.1.4.1.5205.2.19.1.5
feL2ModSW24SaveRestore	1.3.6.1.4.1.5205.2.19.1.5.1
INT feL2ModSW24SaveStart	1.3.6.1.4.1.5205.2.19.1.5.1.1	INTEGER	read-write	Save current configuration into flash memory (Save as Start Configuration). Get this OID always return zero. 1 - save. 0 - do nothing.
INT feL2ModSW24SaveUser	1.3.6.1.4.1.5205.2.19.1.5.1.2	INTEGER	read-write	Save current configuration into flash memory (Save as User Configuration). Get this OID always return zero. 1 - save. 0 - do nothing.
INT feL2ModSW24RestoreDefault	1.3.6.1.4.1.5205.2.19.1.5.1.3	INTEGER	read-write	Restore factory default configuration. Get this OID always return zero. 2 - restore default included default ip address. 1 - restore default without changing current ip address. 0 - do nothing.
INT feL2ModSW24RestoreUser	1.3.6.1.4.1.5205.2.19.1.5.1.4	INTEGER	read-write	Restore user configuration. Get this OID always return zero. 1 - restore. 0 - do nothing.
feL2ModSW24ConfigFile	1.3.6.1.4.1.5205.2.19.1.5.2
STR feL2ModSW24ExportConfigName	1.3.6.1.4.1.5205.2.19.1.5.2.1	DisplayString	read-write	Get/Set the export file path and name.
INT feL2ModSW24DoExportConfig	1.3.6.1.4.1.5205.2.19.1.5.2.2	INTEGER	read-write	Do export-config. Get this oid always return zero. 1 - export start section. 2 - export user-conf section.
STR feL2ModSW24ImportConfigName	1.3.6.1.4.1.5205.2.19.1.5.2.3	DisplayString	read-write	Get/Set the import file path and name.
INT feL2ModSW24DoImportConfig	1.3.6.1.4.1.5205.2.19.1.5.2.4	INTEGER	read-write	Do import-config. Get this OID always return zero. 1 - import start section. 2 - import user-conf section.
feL2ModSW24Diagnostic	1.3.6.1.4.1.5205.2.19.1.6
STR feL2ModSW24EEPROMTest	1.3.6.1.4.1.5205.2.19.1.6.1	DisplayString	read-only	EEPROM access test.
STR feL2ModSW24UartTest	1.3.6.1.4.1.5205.2.19.1.6.2	DisplayString	read-only	UART access test.
STR feL2ModSW24DramTest	1.3.6.1.4.1.5205.2.19.1.6.3	DisplayString	read-only	DRAM access test.
STR feL2ModSW24FlashTest	1.3.6.1.4.1.5205.2.19.1.6.4	DisplayString	read-only	Flash memory access test.
STR feL2ModSW24InternalLoopbackTest	1.3.6.1.4.1.5205.2.19.1.6.5	DisplayString	read-only	Internal loopback test.
STR feL2ModSW24ExternalLoopbackTest	1.3.6.1.4.1.5205.2.19.1.6.6	DisplayString	read-only	External loopback test.
STR feL2ModSW24PingTest	1.3.6.1.4.1.5205.2.19.1.6.7	DisplayString	read-write	Set the host address that you want to ping and the system will return the test result.
feL2ModSW24Log	1.3.6.1.4.1.5205.2.19.1.7
INT feL2ModSW24ClearLog	1.3.6.1.4.1.5205.2.19.1.7.1	INTEGER	read-write	Clear system log. Get this OID always return zero. 1 - clear log. 0 - do nothing.
INT feL2ModSW24UploadLog	1.3.6.1.4.1.5205.2.19.1.7.2	INTEGER	read-write	Upload current system log. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero. 1 - upload log 0 - do nothing.
INT feL2ModSW24AutoUploadLogState	1.3.6.1.4.1.5205.2.19.1.7.3	INTEGER	read-write	Enable auto-upload log function. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero. 1 - Enable auto-upload 0 - do nothing.
INT feL2ModSW24LogNumber	1.3.6.1.4.1.5205.2.19.1.7.4	INTEGER	read-only	Get the number of current system log.
feL2ModSW24LogTable	1.3.6.1.4.1.5205.2.19.1.7.5		not-accessible	This is a list of log entry. The numbers of entries are given by the value of feL2ModSW24LogNumber.
feL2ModSW24LogEntry	1.3.6.1.4.1.5205.2.19.1.7.5.1		not-accessible	This is the Entry information for system log.
INT feL2ModSW24LogIndex	1.3.6.1.4.1.5205.2.19.1.7.5.1.1	INTEGER	read-only	This is the index of the log entry.
STR feL2ModSW24LogEvent	1.3.6.1.4.1.5205.2.19.1.7.5.1.2	DisplayString	read-only	This is the detail information of the log entry.
feL2ModSW24Firmware	1.3.6.1.4.1.5205.2.19.1.8
STR feL2ModSW24FirmwareFileName	1.3.6.1.4.1.5205.2.19.1.8.1	DisplayString	read-write	Get/Set the path and filename for firmware upgrading.
INT feL2ModSW24DoFirmwareUpgrade	1.3.6.1.4.1.5205.2.19.1.8.2	INTEGER	read-write	Do firmware upgrade. Get this OID always return zero. 1 - do firmware upgrade. 0 - do nothing.
feL2ModSW24Port	1.3.6.1.4.1.5205.2.19.1.9
feL2ModSW24PortStatus	1.3.6.1.4.1.5205.2.19.1.9.1
INT feL2ModSW24PortStatusNumber	1.3.6.1.4.1.5205.2.19.1.9.1.1	INTEGER	read-only	Get the number of port.
feL2ModSW24PortStatusTable	1.3.6.1.4.1.5205.2.19.1.9.1.2		not-accessible	This is a list of port status entry. The numbers of entries are given by the value of feL2ModSW24PortStatusNumber.
feL2ModSW24PortStatusEntry	1.3.6.1.4.1.5205.2.19.1.9.1.2.1		not-accessible	This is the entry(s) for port status information.
INT feL2ModSW24PortStatusIndex	1.3.6.1.4.1.5205.2.19.1.9.1.2.1.1	INTEGER	read-only	This is the index of the port status entry.
STR feL2ModSW24PortStatusMedia	1.3.6.1.4.1.5205.2.19.1.9.1.2.1.2	DisplayString	read-only	The port media type of the port status entry.
STR feL2ModSW24PortStatusLink	1.3.6.1.4.1.5205.2.19.1.9.1.2.1.3	DisplayString	read-only	This is the port link of the port status entry.
STR feL2ModSW24PortStatusPortState	1.3.6.1.4.1.5205.2.19.1.9.1.2.1.4	DisplayString	read-only	This is the port state of the port status entry.
STR feL2ModSW24PortStatusAutoNego	1.3.6.1.4.1.5205.2.19.1.9.1.2.1.5	DisplayString	read-only	This is the auto negotiation of the port status entry.
STR feL2ModSW24PortStatusSpdDpx	1.3.6.1.4.1.5205.2.19.1.9.1.2.1.6	DisplayString	read-only	This is the speed/duplex of the port status entry.
STR feL2ModSW24PortStatusFlwCtrl	1.3.6.1.4.1.5205.2.19.1.9.1.2.1.7	DisplayString	read-only	This is the flow control of the port status entry.
STR feL2ModSW24PortStatuDescription	1.3.6.1.4.1.5205.2.19.1.9.1.2.1.8	DisplayString	read-only	The description of port.
feL2ModSW24PortConf	1.3.6.1.4.1.5205.2.19.1.9.2
INT feL2ModSW24PortConfNumber	1.3.6.1.4.1.5205.2.19.1.9.2.1	INTEGER	read-only	Get the number of port configuration.
feL2ModSW24PortConfTable	1.3.6.1.4.1.5205.2.19.1.9.2.2		not-accessible	This is a list of port configuration entry. The numbers of entries are given by the value of feL2ModSW24PortConfNumber.
feL2ModSW24PortConfEntry	1.3.6.1.4.1.5205.2.19.1.9.2.2.1		not-accessible	This is the Entry(s) for port configuration information.
INT feL2ModSW24PortConfIndex	1.3.6.1.4.1.5205.2.19.1.9.2.2.1.1	INTEGER	read-only	This is the index of the port configuration entry.
INT feL2ModSW24PortConfPortState	1.3.6.1.4.1.5205.2.19.1.9.2.2.1.2	INTEGER	read-write	This is the port state of the port configuration entry. 0 - disabled. 1 - enabled.
INT feL2ModSW24PortConfSpdDpx	1.3.6.1.4.1.5205.2.19.1.9.2.2.1.3	INTEGER	read-write	This is the speed/duplex of the port configuration entry. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/Full. 5 - 1G/Full.
INT feL2ModSW24PortConfFlwCtrl	1.3.6.1.4.1.5205.2.19.1.9.2.2.1.4	INTEGER	read-write	This is the flow control of the port configuration entry. 0 - disabled. 1 - enabled.
STR feL2ModSW24PortConfDescription	1.3.6.1.4.1.5205.2.19.1.9.2.2.1.5	DisplayString	read-write	The description of port.
feL2ModSW24Mirror	1.3.6.1.4.1.5205.2.19.1.10
INT feL2ModSW24MirrorMode	1.3.6.1.4.1.5205.2.19.1.10.1	INTEGER	read-write	Get/Set the Mirror mode. 0 - disabled. 1 - rx enable.
INT feL2ModSW24MirroringPort	1.3.6.1.4.1.5205.2.19.1.10.2	INTEGER	read-write	Get/Set the mirroring port. The port range is from 1 to 24.
STR feL2ModSW24MirroredPorts	1.3.6.1.4.1.5205.2.19.1.10.3	DisplayString	read-write	Get/Set the monitored ports. The port range is from 1 to 24, and the syntax is 1,5-7.
feL2ModSW24MaxPktLen	1.3.6.1.4.1.5205.2.19.1.11
feL2ModSW24MaxPktLen1	1.3.6.1.4.1.5205.2.19.1.11.1
INT feL2ModSW24MaxPktLenPortNumber	1.3.6.1.4.1.5205.2.19.1.11.1.1	INTEGER	read-only	Get the number of Max. packet length.
feL2ModSW24MaxPktLenConfTable	1.3.6.1.4.1.5205.2.19.1.11.1.2		not-accessible	This is a list of Max. packet length entry. The numbers of entries are given by the value of feL2ModSW24MaxPktLenPortNumber.
feL2ModSW24MaxPktLenConfEntry	1.3.6.1.4.1.5205.2.19.1.11.1.2.1		not-accessible	Entry(s) for Max. packet length information.
INT feL2ModSW24MaxPktLenConfIndex	1.3.6.1.4.1.5205.2.19.1.11.1.2.1.1	INTEGER	read-only	This is the index of the Max. packet length entry.
INT feL2ModSW24MaxPktLenConfSetting	1.3.6.1.4.1.5205.2.19.1.11.1.2.1.2	INTEGER	read-write	Get/Set the Max. packet length. The Max. packet length is 1518,1532,or 9216.
feL2ModSW24Bandwidth	1.3.6.1.4.1.5205.2.19.1.12
feL2ModSW24Bandwidth1	1.3.6.1.4.1.5205.2.19.1.12.1
INT feL2ModSW24BandwidthPortNumber	1.3.6.1.4.1.5205.2.19.1.12.1.1	INTEGER	read-only	Get the number of bandwidth management configuration.
feL2ModSW24BandwidthConfTable	1.3.6.1.4.1.5205.2.19.1.12.1.2		not-accessible	A list of bandwidth management configuration entry. The numbers of entries are given by the value of feL2ModSW24BandwidthPortNumber.
feL2ModSW24BandwidthConfEntry	1.3.6.1.4.1.5205.2.19.1.12.1.2.1		not-accessible	This is the Entry(s) for bandwidth management configuration information.
INT feL2ModSW24BandwidthConfIndex	1.3.6.1.4.1.5205.2.19.1.12.1.2.1.1	INTEGER	read-only	This is the index of the bandwidth management configuration entry.
INT feL2ModSW24BandwidthConfIngressState	1.3.6.1.4.1.5205.2.19.1.12.1.2.1.2	INTEGER	read-write	The ingress state of the bandwidth management configures entry. 0 - disabled. 1 - enabled.
INT feL2ModSW24BandwidthConfIngressBW	1.3.6.1.4.1.5205.2.19.1.12.1.2.1.3	INTEGER	read-write	Get/Set the ingress rate of the bandwidth management configuration. The ingress rate is from 0 to 1000.
INT feL2ModSW24BandwidthConfStormState	1.3.6.1.4.1.5205.2.19.1.12.1.2.1.4	INTEGER	read-write	The storm state of the bandwidth management configuration entry. 0 - disabled. 1 - enabled.
INT feL2ModSW24BandwidthConfStormBW	1.3.6.1.4.1.5205.2.19.1.12.1.2.1.5	INTEGER	read-write	Get/Set the storm rate of the bandwidth management configuration. The storm rate is from 0 to 1000.
INT feL2ModSW24BandwidthConfEgressState	1.3.6.1.4.1.5205.2.19.1.12.1.2.1.6	INTEGER	read-write	The egress state of the bandwidth management configuration entry. 0 - disabled. 1 - enabled.
INT feL2ModSW24BandwidthConfEgressBW	1.3.6.1.4.1.5205.2.19.1.12.1.2.1.7	INTEGER	read-write	Get/Set the egress rate of the bandwidth management configuration. The egress rate is from 0 to 1000.
feL2ModSW24LoopDetectedConf	1.3.6.1.4.1.5205.2.19.1.13
INT feL2ModSW24LoopDetectedNumber	1.3.6.1.4.1.5205.2.19.1.13.1	INTEGER	read-only	Get the number of loop detected entry.
feL2ModSW24LoopDetectedTable	1.3.6.1.4.1.5205.2.19.1.13.2		not-accessible	A list of loop detected entry. The numbers of entries are given by the value of feL2ModSW24LoopDetectedNumber.
feL2ModSW24LoopDetectedEntry	1.3.6.1.4.1.5205.2.19.1.13.2.1		not-accessible	Entry(s) for loop detected information.
INT feL2ModSW24LoopDetectedfIndex	1.3.6.1.4.1.5205.2.19.1.13.2.1.1	INTEGER	read-only	The index of the loop detected entry.
INT feL2ModSW24LoopDetectedStateEbl	1.3.6.1.4.1.5205.2.19.1.13.2.1.2	INTEGER	read-write	The state of the loop detected entry. 0 - disabled. 1 - enabled.
INT feL2ModSW24LoopDetectedCurrentStatus	1.3.6.1.4.1.5205.2.19.1.13.2.1.3	INTEGER	read-only	The current status of the loop detected port. 0 - unlocked 1 - locked due to the loop condition
INT feL2ModSW24LoopDetectedResumed	1.3.6.1.4.1.5205.2.19.1.13.2.1.4	INTEGER	read-write	Unlock the port which is locked due to loop condition. Get this OID always return zero. 1 - unlock the port, 0 - do nothing.
INT feL2ModSW24LoopDetectedAction	1.3.6.1.4.1.5205.2.19.1.13.3	INTEGER	read-write	Set the corresponding action while loop is detected. 1 - lock the loop port, 0 - do nothing.
feL2ModSW24SFPInfo	1.3.6.1.4.1.5205.2.19.1.14
INT feL2ModSW24SFPInfoNumber	1.3.6.1.4.1.5205.2.19.1.14.1	INTEGER	read-only	Get the number of sfp info entry.
feL2ModSW24SFPInfoTable	1.3.6.1.4.1.5205.2.19.1.14.2		not-accessible	A list of sfp info entry. The numbers of entries are given by the value of feL2ModSW24SFPInfoNumber.
feL2ModSW24SFPInfoEntry	1.3.6.1.4.1.5205.2.19.1.14.2.1		not-accessible	Entry(s) for SFP information.
INT feL2ModSW24SFPInfoIndex	1.3.6.1.4.1.5205.2.19.1.14.2.1.1	INTEGER	read-only	The index of the sfp info entry.
STR feL2ModSW24SFPConnectorType	1.3.6.1.4.1.5205.2.19.1.14.2.1.2	DisplayString	read-only	Get connector type of the sfp.
STR feL2ModSW24SFPFiberType	1.3.6.1.4.1.5205.2.19.1.14.2.1.3	DisplayString	read-only	Get fiber type of the sfp.
STR feL2ModSW24SFPWavelength	1.3.6.1.4.1.5205.2.19.1.14.2.1.4	DisplayString	read-only	Get tx central wavelength of the sfp.
STR feL2ModSW24SFPBaudRate	1.3.6.1.4.1.5205.2.19.1.14.2.1.5	DisplayString	read-only	Get baud rate of the sfp.
STR feL2ModSW24SFPVendorOUI	1.3.6.1.4.1.5205.2.19.1.14.2.1.6	DisplayString	read-only	Get vendor OUI of the sfp.
STR feL2ModSW24SFPVendorName	1.3.6.1.4.1.5205.2.19.1.14.2.1.7	DisplayString	read-only	Get vendor name of the sfp.
STR feL2ModSW24SFPVendorPN	1.3.6.1.4.1.5205.2.19.1.14.2.1.8	DisplayString	read-only	Get vendor part number of the sfp.
STR feL2ModSW24SFPVendorRev	1.3.6.1.4.1.5205.2.19.1.14.2.1.9	DisplayString	read-only	Get vendor revision number of the sfp.
STR feL2ModSW24SFPVendorSN	1.3.6.1.4.1.5205.2.19.1.14.2.1.10	DisplayString	read-only	Get vendor serial number of the sfp.
STR feL2ModSW24SFPDateCode	1.3.6.1.4.1.5205.2.19.1.14.2.1.11	DisplayString	read-only	Get data code of the sfp.
STR feL2ModSW24SFPTemperature	1.3.6.1.4.1.5205.2.19.1.14.2.1.12	DisplayString	read-only	Get current temperature of the sfp.
STR feL2ModSW24SFPVcc	1.3.6.1.4.1.5205.2.19.1.14.2.1.13	DisplayString	read-only	Get current internal supply voltage of the sfp.
STR feL2ModSW24SFPTxBias	1.3.6.1.4.1.5205.2.19.1.14.2.1.14	DisplayString	read-only	Get current TX Bias of the sfp.
STR feL2ModSW24SFPTxPWR	1.3.6.1.4.1.5205.2.19.1.14.2.1.15	DisplayString	read-only	Get current TX output power of the sfp.
STR feL2ModSW24SFPRxPWR	1.3.6.1.4.1.5205.2.19.1.14.2.1.16	DisplayString	read-only	Get current Received Power of the sfp.
feL2ModSW24TrapEntry	1.3.6.1.4.1.5205.2.19.1.20
NTF feL2ModSW24ModuleInserted	1.3.6.1.4.1.5205.2.19.1.20.1			Send the trap when a module is inserted to the system. The OID value means the port number.
NTF feL2ModSW24ModuleRemoved	1.3.6.1.4.1.5205.2.19.1.20.2			Send the trap when a module is removed from the system. The OID value means the port number.
NTF feL2ModSW24LoopDetected	1.3.6.1.4.1.5205.2.19.1.20.5			Send the trap when loop condition has been detected. The OID value means the port number.
NTF feL2ModSW24StpStateDisabled	1.3.6.1.4.1.5205.2.19.1.20.100			Send the trap when the operational state of STP is from enabled to disabled.
NTF feL2ModSW24StpStateEnabled	1.3.6.1.4.1.5205.2.19.1.20.101			Send the trap when the operational state of STP is from disabled to enabled.
NTF feL2ModSW24StpTopologyChanged	1.3.6.1.4.1.5205.2.19.1.20.102			Send the trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces the topology change
NTF feL2ModSW24LacpStateDisabled	1.3.6.1.4.1.5205.2.19.1.20.120			Send the trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID.
NTF feL2ModSW24LacpStateEnabled	1.3.6.1.4.1.5205.2.19.1.20.121			Send the trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID.
NTF feL2ModSW24LacpPortAdded	1.3.6.1.4.1.5205.2.19.1.20.123			Send the trap when the state of port is in 'trunk ready'.
NTF feL2ModSW24LacpPortTrunkFailure	1.3.6.1.4.1.5205.2.19.1.20.124			Send the trap when one port is not able to be aggregated due to duplex-mode of the port.
NTF feL2ModSW24GvrpStateDisabled	1.3.6.1.4.1.5205.2.19.1.20.140			Send the trap when the operational state of GVRP is from enabled to disabled.
NTF feL2ModSW24GvrpStateEnabled	1.3.6.1.4.1.5205.2.19.1.20.141			Send the trap when the operational state of LACP is from disabled to enabled.
NTF feL2ModSW24VlanStateDisabled	1.3.6.1.4.1.5205.2.19.1.20.150			Send the trap when the operational state of vlan is from enabled to disabled. The OID value means the enabled Group ID.
NTF feL2ModSW24VlanPortBaseEnabled	1.3.6.1.4.1.5205.2.19.1.20.151			Send the trap when the operational state of vlan is changed to port-based vlan.
NTF feL2ModSW24VlanTagBaseEnabled	1.3.6.1.4.1.5205.2.19.1.20.152			Send the trap when the operational state of vlan is changed to tag-based vlan.
NTF feL2ModSW24VlanMetroModeEnabled	1.3.6.1.4.1.5205.2.19.1.20.153			Send the trap when the operational state of vlan is changed to Metro-mode vlan. The OID value means the uplink port with this metro-mode vlan.
NTF feL2ModSW24VlanDoubleTagEnabled	1.3.6.1.4.1.5205.2.19.1.20.154			Send the trap when the operational state of vlan is changed to Double-tag vlan.
NTF feL2ModSW24UserLogin	1.3.6.1.4.1.5205.2.19.1.20.200			Send the trap when one user logins the system.
NTF feL2ModSW24UserLogout	1.3.6.1.4.1.5205.2.19.1.20.201			Send the trap when one user logouts the system.
feL2ModSW24TrapVariable	1.3.6.1.4.1.5205.2.19.1.21
STR username	1.3.6.1.4.1.5205.2.19.1.21.1	DisplayString	read-only	System account name.
INT groupId	1.3.6.1.4.1.5205.2.19.1.21.2	INTEGER	read-only	The Trunk group ID of LACP.
INT actorkey	1.3.6.1.4.1.5205.2.19.1.21.3	INTEGER	read-only	This is the actor key information for LACP.
INT partnerkey	1.3.6.1.4.1.5205.2.19.1.21.4	INTEGER	read-only	This is the partner key information for LACP.
STR uplink	1.3.6.1.4.1.5205.2.19.1.21.5	DisplayString	read-only	Uplink port(s) in the metro-mode vlan.

RFC description

Manages FEL2 Modular SW24 switch system including reboot control, firmware version, and hardware information.

Start monitoring xxx Tech Corp FEL2Mod SW24 embedded Layer 2 switch module with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PRIVATE-FEL2Mod-SW24-MIB

What Is PRIVATE-FEL2Mod-SW24-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description