PRIVATE-SW0657840-MIB

All MIBs › PRIVATE-SW0657840-MIB

Organization: xxx Tech Corp.

Last Updated: 2006-07-03

Category: System Management

Description: Manages xxx Tech Corp. SW0657840 switch device configuration and operational parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PRIVATE-SW0657840-MIB?

PRIVATE-SW0657840-MIB is a vendor-private (white-label/OEM) MIB for the SW0657840 switch model produced by an unnamed 'xxx Tech Corp.', a common pattern for rebranded generic switch platforms. It exposes device configuration and identity data including hardware, firmware, BIOS and mechanical version strings, serial number, host MAC address, product ID, memory and flash sizes, IP addressing, and DHCP settings. For hardware/software status monitoring it directly supports checking firmware/BIOS/hardware version levels (useful for tracking whether devices need a firmware upgrade), RAM and flash memory sizing, and remote reboot capability (sw0657840Reboot) as an operational control. It has no apparent dependency on standard IETF MIBs beyond basic SNMPv2-SMI conventions, being a fully proprietary enterprise tree. It is typically deployed for centralized inventory and configuration management of low-cost unmanaged or semi-managed switches in SMB or OEM network deployments. Engineers can download the PRIVATE-SW0657840-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PRIVATE-SW0657840-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Generic/OEM managed switch
white-label SMB network switch

Monitoring Examples

An administrator polling sw0657840FirmwareVersion, sw0657840BiosVsersion, and sw0657840HardwareVersion across a fleet of these switches can identify devices running outdated firmware that need patching. sw0657840SerialNumber and sw0657840HostMacAddress support asset inventory and device identification, while sw0657840RamSize and sw0657840FlashSize reveal hardware capacity constraints. sw0657840Reboot could be triggered remotely to recover a switch that is unresponsive, and sw0657840DhcpSetting/sw0657840IPAddress confirm current network configuration.

What Can Be Monitored

firmware version
BIOS version
hardware version
serial number
RAM and flash size
DHCP/IP configuration

Imported Objects

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
privatetech	1.3.6.1.4.1.5205			The MIB module is for xxx Tech.
switch	1.3.6.1.4.1.5205.2
sw0657840ProductID	1.3.6.1.4.1.5205.2.9
sw0657840Produces	1.3.6.1.4.1.5205.2.9.1
sw0657840System	1.3.6.1.4.1.5205.2.9.1.1
sw0657840CommonSys	1.3.6.1.4.1.5205.2.9.1.1.1
INT sw0657840Reboot	1.3.6.1.4.1.5205.2.9.1.1.1.1	INTEGER	read-write	Reboot the system. Get this OID always return zero. 0 - do nothing 1 - Reboot without saving start 2 - Reboot with saving start
STR sw0657840BiosVsersion	1.3.6.1.4.1.5205.2.9.1.1.1.2	DisplayString	read-only	Get the BIOS version of the system.
STR sw0657840FirmwareVersion	1.3.6.1.4.1.5205.2.9.1.1.1.3	DisplayString	read-only	Get the firmware version of the system.
STR sw0657840HardwareVersion	1.3.6.1.4.1.5205.2.9.1.1.1.4	DisplayString	read-only	Get the hardware version of the system.
STR sw0657840MechanicalVersion	1.3.6.1.4.1.5205.2.9.1.1.1.5	DisplayString	read-only	Get the mechanical version of the system.
STR sw0657840SerialNumber	1.3.6.1.4.1.5205.2.9.1.1.1.6	DisplayString	read-only	Get the Serial number of the system.
STR sw0657840HostMacAddress	1.3.6.1.4.1.5205.2.9.1.1.1.7	DisplayString	read-only	Get the MAC address of the system.
STR sw0657840DevicePort	1.3.6.1.4.1.5205.2.9.1.1.1.8	DisplayString	read-only	Get the quantity of ports that this system owns now.
STR sw0657840RamSize	1.3.6.1.4.1.5205.2.9.1.1.1.9	DisplayString	read-only	Get the RAM size of the system.
STR sw0657840FlashSize	1.3.6.1.4.1.5205.2.9.1.1.1.10	DisplayString	read-only	Get the flash size of the system.
sw0657840IP	1.3.6.1.4.1.5205.2.9.1.1.2
INT sw0657840DhcpSetting	1.3.6.1.4.1.5205.2.9.1.1.2.1	INTEGER	read-write	Get/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enable
IP sw0657840IPAddress	1.3.6.1.4.1.5205.2.9.1.1.2.2	IpAddress	read-write	Get/Set the IP address of the system. You can't set this OID if DHCP status is enabled.
IP sw0657840NetMask	1.3.6.1.4.1.5205.2.9.1.1.2.3	IpAddress	read-write	Get/Set the subnet mask of the system. You can't set this OID if DHCP status is enabled.
IP sw0657840DefaultGateway	1.3.6.1.4.1.5205.2.9.1.1.2.4	IpAddress	read-write	Get/Set the default gateway of the system. You can't set this OID if DHCP status is enabled.
INT sw0657840DnsSetting	1.3.6.1.4.1.5205.2.9.1.1.2.5	INTEGER	read-write	Get/Set the source of DNS server. You can't set this OID if DHCP status is disabled. 0 - manual, the DNS server is from manual setting 1 - auto, the DNS server is assigned by DHCP server.
IP sw0657840DnsServer	1.3.6.1.4.1.5205.2.9.1.1.2.6	IpAddress	read-write	Get/Set the DNS server of the system.
sw0657840Time	1.3.6.1.4.1.5205.2.9.1.1.3
STR sw0657840SystemCurrentTime	1.3.6.1.4.1.5205.2.9.1.1.3.1	DisplayString	read-only	Get the current time of the system.
STR sw0657840ManualTimeSetting	1.3.6.1.4.1.5205.2.9.1.1.3.2	DisplayString	read-write	Get/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25 . The value range: Year : 2000 - 2036, Mouth : 1 - 12, Day : 1 - 31, Hour : 0 - 23, Minute : 0 - 59, Sec : 0 - 59.
STR sw0657840NTPServer	1.3.6.1.4.1.5205.2.9.1.1.3.3	DisplayString	read-write	Get/Set the NTP Time Server. You can use the IP address or domain name.
INT sw0657840NTPTimeZone	1.3.6.1.4.1.5205.2.9.1.1.3.4	INTEGER	read-write	Get/Set the NTP Time Zone. The value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - GMT -07:00, -6 - GMT -06:00, -5 - GMT -05:00, -4 - GMT -04:00, -3 - GMT -03:00, -2 - GMT -02:00, -1 - GMT -01:00, 0 - GMT +00:00, 1 - GMT +01:00, 2 - GMT +02:00, 3 - GMT +03:00, 4 - GMT +04:00, 5 - GMT +05:00, 6 - GMT +06:00, 7 - GMT +07:00, 8 - GMT +08:00, 9 - GMT +09:00, 10 - GMT +10:00, 11 - GMT +11:00, 12 - GMT +12:00, 13 - GMT +13:00.
INT sw0657840NTPTimeSync	1.3.6.1.4.1.5205.2.9.1.1.3.5	INTEGER	read-write	Sync time from NTP Server. Get this OID always return zero. Set the Time Server and Time Zone before doing time sync. Notice that time server must be correct! The value range (0\|1): 1 - sync. 0 - do nothing.
INT sw0657840DaylightSavingTime	1.3.6.1.4.1.5205.2.9.1.1.3.6	INTEGER	read-write	Get/Set the daylight saving time. The value range is between -5 and 5. (Unit: hour)
STR sw0657840DaylightStartTime	1.3.6.1.4.1.5205.2.9.1.1.3.7	DisplayString	read-write	Get/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 10/01/00 month: 01~12, day: 01~31, hour: 00~23 .
STR sw0657840DaylightEndTime	1.3.6.1.4.1.5205.2.9.1.1.3.8	DisplayString	read-write	Get/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 04/01/00 month: 01~12, day: 01~31, hour: 00~23 .
sw0657840Account	1.3.6.1.4.1.5205.2.9.1.1.4
INT sw0657840AccountNumber	1.3.6.1.4.1.5205.2.9.1.1.4.1	INTEGER	read-only	Get the current account number(s) of the system.
sw0657840AccountTable	1.3.6.1.4.1.5205.2.9.1.1.4.2		not-accessible	This is a list of SW0657840AccountEntry. The numbers of entries are given by the value of sw0657840AccountNumber.
sw0657840AccountEntry	1.3.6.1.4.1.5205.2.9.1.1.4.2.1		not-accessible	This is the Entry(s) for account information.
INT sw0657840AccountIndex	1.3.6.1.4.1.5205.2.9.1.1.4.2.1.1	INTEGER	read-only	This is the index of the account entry.
STR sw0657840AccountAuthorization	1.3.6.1.4.1.5205.2.9.1.1.4.2.1.2	DisplayString	read-only	This is the authorization of the account entry.
STR sw0657840AccountName	1.3.6.1.4.1.5205.2.9.1.1.4.2.1.3	DisplayString	read-write	This is the username of the account entry.
STR sw0657840AccountPassword	1.3.6.1.4.1.5205.2.9.1.1.4.2.1.4	DisplayString	read-write	This is the password of the account entry. The return value is always '********'.
STR sw0657840AccountAddName	1.3.6.1.4.1.5205.2.9.1.1.4.3	DisplayString	read-write	This is the account name for adding operation.
STR sw0657840AccountAddPassword	1.3.6.1.4.1.5205.2.9.1.1.4.4	DisplayString	read-write	This is the account password for adding operation. The return value is always '********'.
INT sw0657840DoAccountAdd	1.3.6.1.4.1.5205.2.9.1.1.4.5	INTEGER	read-write	Add account name. OID sw0657840AccountAddName and sw0657840AccountAddPassword must be filled first. Get this OID always return zero. 1 - add account. 0 - do nothing.
INT sw0657840AccountDel	1.3.6.1.4.1.5205.2.9.1.1.4.6	INTEGER	read-write	Delete account. The value is valid sw0657840AccountIndex(Can't delete administrator).
sw0657840Snmp	1.3.6.1.4.1.5205.2.9.1.2
STR sw0657840GetCommunity	1.3.6.1.4.1.5205.2.9.1.2.1	DisplayString	read-write	Get/Set the get-community of the SNMP.
STR sw0657840SetCommunity	1.3.6.1.4.1.5205.2.9.1.2.2	DisplayString	read-write	Get/Set the set-community of the SNMP.
INT sw0657840TrapHostNumber	1.3.6.1.4.1.5205.2.9.1.2.3	INTEGER	read-only	Get the number of trap hosts.
sw0657840TrapHostTable	1.3.6.1.4.1.5205.2.9.1.2.4		not-accessible	A list of trap host entry. The numbers of entries are given by the value of sw0657840TrapHostNumber.
sw0657840TrapHostEntry	1.3.6.1.4.1.5205.2.9.1.2.4.1		not-accessible	This is the entry information for trap host.
INT sw0657840TrapHostIndex	1.3.6.1.4.1.5205.2.9.1.2.4.1.1	INTEGER	read-only	The index of the trap host entry.
IP sw0657840TrapHostIP	1.3.6.1.4.1.5205.2.9.1.2.4.1.2	IpAddress	read-write	This is the IP of the trap host.
INT sw0657840TrapHostPort	1.3.6.1.4.1.5205.2.9.1.2.4.1.3	INTEGER	read-write	This is the receiving-port number of the trap host.
STR sw0657840TrapHostCommunity	1.3.6.1.4.1.5205.2.9.1.2.4.1.4	DisplayString	read-write	The community name for the trap PDU.
sw0657840Alarm	1.3.6.1.4.1.5205.2.9.1.3
sw0657840Event	1.3.6.1.4.1.5205.2.9.1.3.1
INT sw0657840EventNumber	1.3.6.1.4.1.5205.2.9.1.3.1.1	INTEGER	read-only	Get the total number of alarm events.
sw0657840EventTable	1.3.6.1.4.1.5205.2.9.1.3.1.2		not-accessible	This is a list of alarm event entry. The numbers of entries are given by the value of sw0657840EventNumber.
sw0657840EventEntry	1.3.6.1.4.1.5205.2.9.1.3.1.2.1		not-accessible	This is the entry information for alarm event.
INT sw0657840EventIndex	1.3.6.1.4.1.5205.2.9.1.3.1.2.1.1	INTEGER	read-only	This is the index of the alarm event entry.
STR sw0657840EventName	1.3.6.1.4.1.5205.2.9.1.3.1.2.1.2	DisplayString	read-only	This is the alarm event name.
INT sw0657840EventSendEmail	1.3.6.1.4.1.5205.2.9.1.3.1.2.1.3	INTEGER	read-write	Send email when alarm event is triggered.
INT sw0657840EventSendSMS	1.3.6.1.4.1.5205.2.9.1.3.1.2.1.4	INTEGER	read-write	Send SMS when alarm event is triggered.
INT sw0657840EventSendTrap	1.3.6.1.4.1.5205.2.9.1.3.1.2.1.5	INTEGER	read-write	Send trap when alarm event is triggered.
sw0657840Email	1.3.6.1.4.1.5205.2.9.1.3.2
STR sw0657840EmailServer	1.3.6.1.4.1.5205.2.9.1.3.2.1	DisplayString	read-write	This is the SMTP server for alarm event.
STR sw0657840EmailUsername	1.3.6.1.4.1.5205.2.9.1.3.2.2	DisplayString	read-write	This is the Username of SMTP server.
STR sw0657840EmailPassword	1.3.6.1.4.1.5205.2.9.1.3.2.3	DisplayString	read-write	This is the User Password of SMTP server.
INT sw0657840EmailUserNumber	1.3.6.1.4.1.5205.2.9.1.3.2.4	INTEGER	read-only	The number of the email users that you want to send the alarm notification.
sw0657840EmailUserTable	1.3.6.1.4.1.5205.2.9.1.3.2.5		not-accessible	This is a list of email user entry. The numbers of entries are given by the value of sw0657840EmailUserNumber.
sw0657840EmailUserEntry	1.3.6.1.4.1.5205.2.9.1.3.2.5.1		not-accessible	This is the Entry information for email user entry.
INT sw0657840EmailUserIndex	1.3.6.1.4.1.5205.2.9.1.3.2.5.1.1	INTEGER	read-only	This is the index of the email user entry.
STR sw0657840EmailUserAddress	1.3.6.1.4.1.5205.2.9.1.3.2.5.1.2	DisplayString	read-write	This is the email address of the email user entry.
sw0657840SMS	1.3.6.1.4.1.5205.2.9.1.3.3
STR sw0657840SMSServer	1.3.6.1.4.1.5205.2.9.1.3.3.1	DisplayString	read-write	This is the SMS server for alarm event.
STR sw0657840SMSUsername	1.3.6.1.4.1.5205.2.9.1.3.3.2	DisplayString	read-write	This is the Username of SMS server.
STR sw0657840SMSPassword	1.3.6.1.4.1.5205.2.9.1.3.3.3	DisplayString	read-write	This is the Password of SMS server.
INT sw0657840SMSUserNumber	1.3.6.1.4.1.5205.2.9.1.3.3.4	INTEGER	read-only	The number of the SMS users that you want to send the alarm notification.
sw0657840SMSUserTable	1.3.6.1.4.1.5205.2.9.1.3.3.5		not-accessible	This is a list of SMS user entry. The numbers of entries are given by the value of sw0657840SMSUserNumber.
sw0657840SMSUserEntry	1.3.6.1.4.1.5205.2.9.1.3.3.5.1		not-accessible	This is the Entry information for SMS user entry.
INT sw0657840SMSUserIndex	1.3.6.1.4.1.5205.2.9.1.3.3.5.1.1	INTEGER	read-only	This is the index of the SMS user entry.
STR sw0657840SMSUserMobilePhone	1.3.6.1.4.1.5205.2.9.1.3.3.5.1.2	DisplayString	read-write	The SMS phone number of the SMS user entry.
sw0657840Tftp	1.3.6.1.4.1.5205.2.9.1.4
IP sw0657840TftpServer	1.3.6.1.4.1.5205.2.9.1.4.1	IpAddress	read-write	Get/Set the tftp server.
sw0657840Configuration	1.3.6.1.4.1.5205.2.9.1.5
sw0657840SaveRestore	1.3.6.1.4.1.5205.2.9.1.5.1
INT sw0657840SaveStart	1.3.6.1.4.1.5205.2.9.1.5.1.1	INTEGER	read-write	Save current configuration into flash memory (Save as Start Configuration). Get this OID always return zero. 1 - save. 0 - do nothing.
INT sw0657840SaveUser	1.3.6.1.4.1.5205.2.9.1.5.1.2	INTEGER	read-write	Save current configuration into flash memory (Save as User Configuration). Get this OID always return zero. 1 - save. 0 - do nothing.
INT sw0657840RestoreDefault	1.3.6.1.4.1.5205.2.9.1.5.1.3	INTEGER	read-write	Restore factory default configuration. Get this OID always return zero. 2 - restore default included default ip address. 1 - restore default without changing current ip address. 0 - do nothing.
INT sw0657840RestoreUser	1.3.6.1.4.1.5205.2.9.1.5.1.4	INTEGER	read-write	Restore user configuration. Get this OID always return zero. 1 - restore. 0 - do nothing.
sw0657840ConfigFile	1.3.6.1.4.1.5205.2.9.1.5.2
STR sw0657840ExportConfigName	1.3.6.1.4.1.5205.2.9.1.5.2.1	DisplayString	read-write	Get/Set the export file path and name.
INT sw0657840DoExportConfig	1.3.6.1.4.1.5205.2.9.1.5.2.2	INTEGER	read-write	Do export-config. Get this OID always return zero. 1 - export start section. 2 - export user-conf section.
STR sw0657840ImportConfigName	1.3.6.1.4.1.5205.2.9.1.5.2.3	DisplayString	read-write	Get/Set the import file path and name.
INT sw0657840DoImportConfig	1.3.6.1.4.1.5205.2.9.1.5.2.4	INTEGER	read-write	Do import-config. Get this OID always return zero. 1 - import start section. 2 - import user-conf section.
sw0657840Diagnostic	1.3.6.1.4.1.5205.2.9.1.6
STR sw0657840EEPROMTest	1.3.6.1.4.1.5205.2.9.1.6.1	DisplayString	read-only	EEPROM access test.
STR sw0657840UartTest	1.3.6.1.4.1.5205.2.9.1.6.2	DisplayString	read-only	UART access test.
STR sw0657840DramTest	1.3.6.1.4.1.5205.2.9.1.6.3	DisplayString	read-only	DRAM access test.
STR sw0657840FlashTest	1.3.6.1.4.1.5205.2.9.1.6.4	DisplayString	read-only	Flash memory access test.
STR sw0657840InternalLoopbackTest	1.3.6.1.4.1.5205.2.9.1.6.5	DisplayString	read-only	Internal loopback test.
STR sw0657840ExternalLoopbackTest	1.3.6.1.4.1.5205.2.9.1.6.6	DisplayString	read-only	External loopback test.
STR sw0657840PingTest	1.3.6.1.4.1.5205.2.9.1.6.7	DisplayString	read-write	Set the host address that you want to ping and the system will return the test result.
sw0657840Log	1.3.6.1.4.1.5205.2.9.1.7
INT sw0657840ClearLog	1.3.6.1.4.1.5205.2.9.1.7.1	INTEGER	read-write	Clear system log. Get this OID always return zero. 1 - clear log. 0 - do nothing.
INT sw0657840UploadLog	1.3.6.1.4.1.5205.2.9.1.7.2	INTEGER	read-write	Upload current system log. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero. 1 - upload log 0 - do nothing.
INT sw0657840AutoUploadLogState	1.3.6.1.4.1.5205.2.9.1.7.3	INTEGER	read-write	Enable auto-upload log function. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero. 1 - Enable auto-upload 0 - do nothing.
INT sw0657840LogNumber	1.3.6.1.4.1.5205.2.9.1.7.4	INTEGER	read-only	Get the number of current system log.
sw0657840LogTable	1.3.6.1.4.1.5205.2.9.1.7.5		not-accessible	This is a list of log entry. The numbers of entries are given by the value of sw0657840LogNumber.
sw0657840LogEntry	1.3.6.1.4.1.5205.2.9.1.7.5.1		not-accessible	This is the Entry information for system log.
INT sw0657840LogIndex	1.3.6.1.4.1.5205.2.9.1.7.5.1.1	INTEGER	read-only	This is the index of the log entry.
STR sw0657840LogEvent	1.3.6.1.4.1.5205.2.9.1.7.5.1.2	DisplayString	read-only	This is the detail information of the log entry.
sw0657840Firmware	1.3.6.1.4.1.5205.2.9.1.8
STR sw0657840FirmwareFileName	1.3.6.1.4.1.5205.2.9.1.8.1	DisplayString	read-write	Get/Set the path and filename for firmware upgrading.
INT sw0657840DoFirmwareUpgrade	1.3.6.1.4.1.5205.2.9.1.8.2	INTEGER	read-write	Do firmware upgrade. Get this OID always return zero. 1 - do firmware upgrade. 0 - do nothing.
sw0657840Port	1.3.6.1.4.1.5205.2.9.1.9
sw0657840PortStatus	1.3.6.1.4.1.5205.2.9.1.9.1
INT sw0657840PortStatusNumber	1.3.6.1.4.1.5205.2.9.1.9.1.1	INTEGER	read-only	Get the number of port.
sw0657840PortStatusTable	1.3.6.1.4.1.5205.2.9.1.9.1.2		not-accessible	This is a list of port status entry. The numbers of entries are given by the value of sw0657840PortStatusNumber.
sw0657840PortStatusEntry	1.3.6.1.4.1.5205.2.9.1.9.1.2.1		not-accessible	This is the entry(s) for port status information.
INT sw0657840PortStatusIndex	1.3.6.1.4.1.5205.2.9.1.9.1.2.1.1	INTEGER	read-only	This is the index of the port status entry.
STR sw0657840PortStatusMedia	1.3.6.1.4.1.5205.2.9.1.9.1.2.1.2	DisplayString	read-only	The port media type of the port status entry.
STR sw0657840PortStatusLink	1.3.6.1.4.1.5205.2.9.1.9.1.2.1.3	DisplayString	read-only	This is the port link of the port status entry.
STR sw0657840PortStatusPortState	1.3.6.1.4.1.5205.2.9.1.9.1.2.1.4	DisplayString	read-only	This is the port state of the port status entry.
STR sw0657840PortStatusAutoNego	1.3.6.1.4.1.5205.2.9.1.9.1.2.1.5	DisplayString	read-only	This is the auto negotiation of the port status entry.
STR sw0657840PortStatusSpdDpx	1.3.6.1.4.1.5205.2.9.1.9.1.2.1.6	DisplayString	read-only	This is the speed/duplex of the port status entry.
STR sw0657840PortStatusFlwCtrl	1.3.6.1.4.1.5205.2.9.1.9.1.2.1.7	DisplayString	read-only	This is the flow control of the port status entry.
STR sw0657840PortStatuDescription	1.3.6.1.4.1.5205.2.9.1.9.1.2.1.8	DisplayString	read-only	This is the description of port.
sw0657840PortConf	1.3.6.1.4.1.5205.2.9.1.9.2
INT sw0657840PortConfNumber	1.3.6.1.4.1.5205.2.9.1.9.2.1	INTEGER	read-only	Get the number of port configuration.
sw0657840PortConfTable	1.3.6.1.4.1.5205.2.9.1.9.2.2		not-accessible	This is a list of port configuration entry. The numbers of entries are given by the value of sw0657840PortConfNumber.
sw0657840PortConfEntry	1.3.6.1.4.1.5205.2.9.1.9.2.2.1		not-accessible	This is the Entry(s) for port configuration information.
INT sw0657840PortConfIndex	1.3.6.1.4.1.5205.2.9.1.9.2.2.1.1	INTEGER	read-only	This is the index of the port configuration entry.
INT sw0657840PortConfPortState	1.3.6.1.4.1.5205.2.9.1.9.2.2.1.2	INTEGER	read-write	This is the port state of the port configuration entry. 0 - disabled. 1 - enabled.
INT sw0657840PortConfSpdDpx	1.3.6.1.4.1.5205.2.9.1.9.2.2.1.3	INTEGER	read-write	This is the speed/duplex of the port configuration entry. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/Full. 5 - 1G/Full.
INT sw0657840PortConfFlwCtrl	1.3.6.1.4.1.5205.2.9.1.9.2.2.1.4	INTEGER	read-write	This is the flow control of the port configuration entry. 0 - disabled. 1 - enabled.
STR sw0657840PortConfDescription	1.3.6.1.4.1.5205.2.9.1.9.2.2.1.5	DisplayString	read-write	This is the description of port.
sw0657840Mirror	1.3.6.1.4.1.5205.2.9.1.10
INT sw0657840MirrorMode	1.3.6.1.4.1.5205.2.9.1.10.1	INTEGER	read-write	Get/Set the Mirror mode. 0 - disabled. 1 - rx enable.
INT sw0657840MirroringPort	1.3.6.1.4.1.5205.2.9.1.10.2	INTEGER	read-write	Get/Set the mirroring port. The port range is from 1 to 24.
STR sw0657840MirroredPorts	1.3.6.1.4.1.5205.2.9.1.10.3	DisplayString	read-write	Get/Set the monitored ports. The port range is from 1 to 24, and the syntax is 1,5-7.
sw0657840MaxPktLen	1.3.6.1.4.1.5205.2.9.1.11
sw0657840MaxPktLen1	1.3.6.1.4.1.5205.2.9.1.11.1
INT sw0657840MaxPktLenPortNumber	1.3.6.1.4.1.5205.2.9.1.11.1.1	INTEGER	read-only	Get the number of Max. packet length.
sw0657840MaxPktLenConfTable	1.3.6.1.4.1.5205.2.9.1.11.1.2		not-accessible	This is a list of Max. packet length entry. The numbers of entries are given by the value of sw0657840MaxPktLenPortNumber.
sw0657840MaxPktLenConfEntry	1.3.6.1.4.1.5205.2.9.1.11.1.2.1		not-accessible	Entry(s) for Max. packet length information.
INT sw0657840MaxPktLenConfIndex	1.3.6.1.4.1.5205.2.9.1.11.1.2.1.1	INTEGER	read-only	This is the index of the Max. packet length entry.
INT sw0657840MaxPktLenConfSetting	1.3.6.1.4.1.5205.2.9.1.11.1.2.1.2	INTEGER	read-write	Get/Set the Max. packet length. The Max. packet length is 1518,1532,or 9216.
sw0657840Bandwidth	1.3.6.1.4.1.5205.2.9.1.12
sw0657840Bandwidth1	1.3.6.1.4.1.5205.2.9.1.12.1
INT sw0657840BandwidthPortNumber	1.3.6.1.4.1.5205.2.9.1.12.1.1	INTEGER	read-only	Get the number of bandwidth management configuration.
sw0657840BandwidthConfTable	1.3.6.1.4.1.5205.2.9.1.12.1.2		not-accessible	This is a list of bandwidth management configuration entry. The numbers of entries are given by the value of sw0657840BandwidthPortNumber.
sw0657840BandwidthConfEntry	1.3.6.1.4.1.5205.2.9.1.12.1.2.1		not-accessible	This is the Entry(s) for bandwidth management configuration information.
INT sw0657840BandwidthConfIndex	1.3.6.1.4.1.5205.2.9.1.12.1.2.1.1	INTEGER	read-only	This is the index of the bandwidth management configuration entry.
INT sw0657840BandwidthConfIngressState	1.3.6.1.4.1.5205.2.9.1.12.1.2.1.2	INTEGER	read-write	The ingress state of the bandwidth management configures entry. 0 - disabled. 1 - enabled.
INT sw0657840BandwidthConfIngressBW	1.3.6.1.4.1.5205.2.9.1.12.1.2.1.3	INTEGER	read-write	Get/Set the ingress rate of the bandwidth management configuration. The ingress rate is from 0 to 1000.
INT sw0657840BandwidthConfStormState	1.3.6.1.4.1.5205.2.9.1.12.1.2.1.4	INTEGER	read-write	The storm state of the bandwidth management configuration entry. 0 - disabled. 1 - enabled.
INT sw0657840BandwidthConfStormBW	1.3.6.1.4.1.5205.2.9.1.12.1.2.1.5	INTEGER	read-write	Get/Set the storm rate of the bandwidth management configuration. The storm rate is from 0 to 1000.
INT sw0657840BandwidthConfEgressState	1.3.6.1.4.1.5205.2.9.1.12.1.2.1.6	INTEGER	read-write	The egress state of the bandwidth management configuration entry. 0 - disabled. 1 - enabled.
INT sw0657840BandwidthConfEgressBW	1.3.6.1.4.1.5205.2.9.1.12.1.2.1.7	INTEGER	read-write	Get/Set the egress rate of the bandwidth management configuration. The egress rate is from 0 to 1000.
sw0657840LoopDetectedConf	1.3.6.1.4.1.5205.2.9.1.13
INT sw0657840LoopDetectedNumber	1.3.6.1.4.1.5205.2.9.1.13.1	INTEGER	read-only	Get the number of loop detected entry.
sw0657840LoopDetectedTable	1.3.6.1.4.1.5205.2.9.1.13.2		not-accessible	A list of loop detected entry. The numbers of entries are given by the value of sw0657840LoopDetectedNumber.
sw0657840LoopDetectedEntry	1.3.6.1.4.1.5205.2.9.1.13.2.1		not-accessible	Entry(s) for loop detected information.
INT sw0657840LoopDetectedfIndex	1.3.6.1.4.1.5205.2.9.1.13.2.1.1	INTEGER	read-only	The index of the loop detected entry.
INT sw0657840LoopDetectedStateEbl	1.3.6.1.4.1.5205.2.9.1.13.2.1.2	INTEGER	read-write	The state of the loop detected entry. 0 - disabled. 1 - enabled.
INT sw0657840LoopDetectedCurrentStatus	1.3.6.1.4.1.5205.2.9.1.13.2.1.3	INTEGER	read-only	The current status of the loop detected port. 0 - unlocked 1 - locked due to the loop condition
INT sw0657840LoopDetectedResumed	1.3.6.1.4.1.5205.2.9.1.13.2.1.4	INTEGER	read-write	Unlock the port which is locked due to loop condition. Get this OID always return zero. 1 - unlock the port, 0 - do nothing.
INT sw0657840LoopDetectedAction	1.3.6.1.4.1.5205.2.9.1.13.3	INTEGER	read-write	Set the corresponding action while loop is detected. 1 - lock the loop port, 0 - do nothing.
sw0657840SFPInfo	1.3.6.1.4.1.5205.2.9.1.14
INT sw0657840SFPInfoNumber	1.3.6.1.4.1.5205.2.9.1.14.1	INTEGER	read-only	Get the number of sfp info entry.
sw0657840SFPInfoTable	1.3.6.1.4.1.5205.2.9.1.14.2		not-accessible	A list of sfp info entry. The numbers of entries are given by the value of sw0657840SFPInfoNumber.
sw0657840SFPInfoEntry	1.3.6.1.4.1.5205.2.9.1.14.2.1		not-accessible	Entry(s) for SFP information.
INT sw0657840SFPInfoIndex	1.3.6.1.4.1.5205.2.9.1.14.2.1.1	INTEGER	read-only	The index of the sfp info entry.
STR sw0657840SFPConnectorType	1.3.6.1.4.1.5205.2.9.1.14.2.1.2	DisplayString	read-only	Get connector type of the sfp.
STR sw0657840SFPFiberType	1.3.6.1.4.1.5205.2.9.1.14.2.1.3	DisplayString	read-only	Get fiber type of the sfp.
STR sw0657840SFPWavelength	1.3.6.1.4.1.5205.2.9.1.14.2.1.4	DisplayString	read-only	Get tx central wavelength of the sfp.
STR sw0657840SFPBaudRate	1.3.6.1.4.1.5205.2.9.1.14.2.1.5	DisplayString	read-only	Get baud rate of the sfp.
STR sw0657840SFPVendorOUI	1.3.6.1.4.1.5205.2.9.1.14.2.1.6	DisplayString	read-only	Get vendor OUI of the sfp.
STR sw0657840SFPVendorName	1.3.6.1.4.1.5205.2.9.1.14.2.1.7	DisplayString	read-only	Get vendor name of the sfp.
STR sw0657840SFPVendorPN	1.3.6.1.4.1.5205.2.9.1.14.2.1.8	DisplayString	read-only	Get vendor part number of the sfp.
STR sw0657840SFPVendorRev	1.3.6.1.4.1.5205.2.9.1.14.2.1.9	DisplayString	read-only	Get vendor revision number of the sfp.
STR sw0657840SFPVendorSN	1.3.6.1.4.1.5205.2.9.1.14.2.1.10	DisplayString	read-only	Get vendor serial number of the sfp.
STR sw0657840SFPDateCode	1.3.6.1.4.1.5205.2.9.1.14.2.1.11	DisplayString	read-only	Get data code of the sfp.
STR sw0657840SFPTemperature	1.3.6.1.4.1.5205.2.9.1.14.2.1.12	DisplayString	read-only	Get current temperature of the sfp.
STR sw0657840SFPVcc	1.3.6.1.4.1.5205.2.9.1.14.2.1.13	DisplayString	read-only	Get current internal supply voltage of the sfp.
STR sw0657840SFPTxBias	1.3.6.1.4.1.5205.2.9.1.14.2.1.14	DisplayString	read-only	Get current TX Bias of the sfp.
STR sw0657840SFPTxPWR	1.3.6.1.4.1.5205.2.9.1.14.2.1.15	DisplayString	read-only	Get current TX output power of the sfp.
STR sw0657840SFPRxPWR	1.3.6.1.4.1.5205.2.9.1.14.2.1.16	DisplayString	read-only	Get current Received Power of the sfp.
sw0657840TrapEntry	1.3.6.1.4.1.5205.2.9.1.20
NTF sw0657840ModuleInserted	1.3.6.1.4.1.5205.2.9.1.20.1			Send the trap when a module is inserted to the system. The OID value means the port number.
NTF sw0657840ModuleRemoved	1.3.6.1.4.1.5205.2.9.1.20.2			Send the trap when a module is removed from the system. The OID value means the port number.
NTF sw0657840DualMediaSwapped	1.3.6.1.4.1.5205.2.9.1.20.3			Send the trap when the dual media port changed. The OID value means the port number.
NTF sw0657840LoopDetected	1.3.6.1.4.1.5205.2.9.1.20.5			Send the trap when loop condition has been detected. The OID value means the port number.
NTF sw0657840StpStateDisabled	1.3.6.1.4.1.5205.2.9.1.20.100			Send the trap when the operational state of STP is from enabled to disabled.
NTF sw0657840StpStateEnabled	1.3.6.1.4.1.5205.2.9.1.20.101			Send the trap when the operational state of STP is from disabled to enabled.
NTF sw0657840StpTopologyChanged	1.3.6.1.4.1.5205.2.9.1.20.102			Send the trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces the topology change.
NTF sw0657840LacpStateDisabled	1.3.6.1.4.1.5205.2.9.1.20.120			Send the trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID.
NTF sw0657840LacpStateEnabled	1.3.6.1.4.1.5205.2.9.1.20.121			Send the trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID.
NTF sw0657840LacpPortAdded	1.3.6.1.4.1.5205.2.9.1.20.123			Send the trap when the state of port is in 'trunk ready'.
NTF sw0657840LacpPortTrunkFailure	1.3.6.1.4.1.5205.2.9.1.20.124			Send the trap when one port is not able to be aggregated due to duplex-mode of the port.
NTF sw0657840GvrpStateDisabled	1.3.6.1.4.1.5205.2.9.1.20.140			Send the trap when the operational state of GVRP is from enabled to disabled.
NTF sw0657840GvrpStateEnabled	1.3.6.1.4.1.5205.2.9.1.20.141			Send the trap when the operational state of LACP is from disabled to enabled.
NTF sw0657840VlanStateDisabled	1.3.6.1.4.1.5205.2.9.1.20.150			Send the trap when the operational state of vlan is from enabled to disabled. The OID value means the enabled Group ID.
NTF sw0657840VlanPortBaseEnabled	1.3.6.1.4.1.5205.2.9.1.20.151			Send the trap when the operational state of vlan is changed to port-based vlan.
NTF sw0657840VlanTagBaseEnabled	1.3.6.1.4.1.5205.2.9.1.20.152			Send the trap when the operational state of vlan is changed to tag-based vlan.
NTF sw0657840VlanMetroModeEnabled	1.3.6.1.4.1.5205.2.9.1.20.153			Send the trap when the operational state of vlan is changed to Metro-mode vlan. The OID value means the uplink port with this metro-mode vlan.
NTF sw0657840VlanDoubleTagEnabled	1.3.6.1.4.1.5205.2.9.1.20.154			Send the trap when the operational state of vlan is changed to Double-tag vlan.
NTF sw0657840UserLogin	1.3.6.1.4.1.5205.2.9.1.20.200			Send the trap when one user logins the system.
NTF sw0657840UserLogout	1.3.6.1.4.1.5205.2.9.1.20.201			Send the trap when one user logouts the system.
sw0657840TrapVariable	1.3.6.1.4.1.5205.2.9.1.21
STR username	1.3.6.1.4.1.5205.2.9.1.21.1	DisplayString	read-only	System account name.
INT groupId	1.3.6.1.4.1.5205.2.9.1.21.2	INTEGER	read-only	The Trunk group ID of LACP.
INT actorkey	1.3.6.1.4.1.5205.2.9.1.21.3	INTEGER	read-only	This is the actor key information for LACP.
INT partnerkey	1.3.6.1.4.1.5205.2.9.1.21.4	INTEGER	read-only	This is the partner key information for LACP.
STR uplink	1.3.6.1.4.1.5205.2.9.1.21.5	DisplayString	read-only	Uplink port(s) in the metro-mode vlan.

RFC description

Provides system version, reboot control, and hardware information for a private switch device.

Start monitoring Generic/OEM managed switch, white-label SMB network switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PRIVATE-SW0657840-MIB

What Is PRIVATE-SW0657840-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description