All MIBs › PEA-VDSL-IPDSLAM › vdslLineConfPhysVdslPboPsdUpForceElectricalLength
vdslLineConfPhysVdslPboPsdUpForceElectricalLength
Module: PEA-VDSL-IPDSLAM
OID (symbolic): PEA-VDSL-IPDSLAM::vdslLineConfPhysVdslPboPsdUpForceElectricalLength
OID (numeric): 1.3.6.1.4.1.193.72.300.80.1.7.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If set, this electrical length (unit in 0.1 dB) will be enforced by the CO on the CPE, resulting in a predefined US PBO. If !=0, enforce US PBO corresponding to a line whose attenuation at 1MHz equals this number. Valid range [0,127] dB. A negative value of -1 mean: don't force the electrical length, but use the measured value instead. G.997.1 name: UPBOKL. G.997.1 name: UPBOKLF.
What is vdslLineConfPhysVdslPboPsdUpForceElectricalLength?
Forces the CO to assume a specific electrical line length (in 0.1 dB steps, valid range 0-127 dB) when computing upstream power back-off for the CPE, instead of using the measured value. A value of -1 disables the override and reverts to the measured electrical length; this corresponds to G.997.1's UPBOKL/UPBOKLF parameters.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.300.80.1.7.1.10 snmpwalk -v2c -c public <target> PEA-VDSL-IPDSLAM::vdslLineConfPhysVdslPboPsdUpForceElectricalLength
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.300.80.1.7.1.10.1 snmpget -v2c -c public <target> PEA-VDSL-IPDSLAM::vdslLineConfPhysVdslPboPsdUpForceElectricalLength.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.193.72.300.80.1.7.1.10.1 i <value>
Start monitoring Ericsson Diax IP DSLAM, VDSL/VDSL2 access equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-VDSL-IPDSLAM::vdslLineConfPhysVdslPboPsdUpForceElectricalLength OID value, configure state conditions and alerts, and monitor any Ericsson Diax IP DSLAM, VDSL/VDSL2 access equipment from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.300 | peaIpDslam | DIESEL-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.72.300.80 | peaVdslIpDslam | PEA-VDSL-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.80.1 | vdslObjects | PEA-VDSL-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.80.1.7 | vdslLineConfPhysVdslPboPsdUpTable | PEA-VDSL-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.80.1.7.1 | vdslLineConfPhysVdslPboPsdUpEntry | PEA-VDSL-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.80.1.7.1.10 | vdslLineConfPhysVdslPboPsdUpForceElectricalLength | PEA-VDSL-IPDSLAM |