All MIBs › PEA-VDSL-IPDSLAM › vdslLineConfPhysVdslPboPsdDnEsel
vdslLineConfPhysVdslPboPsdDnEsel
Module: PEA-VDSL-IPDSLAM
OID (symbolic): PEA-VDSL-IPDSLAM::vdslLineConfPhysVdslPboPsdDnEsel
OID (numeric): 1.3.6.1.4.1.193.72.300.80.1.20.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped downstream power back-off depending on this length. For this parameter the electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency defined by the network operator or in spectrum management regulations. DPBOESEL shall be coded as an unsigned integer representing an electrical length from 0 dB to 255.5 dB in steps of 0.5 dB. All values in the range are valid. If DPBOESEL is set to zero, the DPBO in this section shall be disabled. G.997.1 name: DPBOESEL. Valid from: EDA 4.0
What is vdslLineConfPhysVdslPboPsdDnEsel?
Sets the assumed electrical length (DPBOESEL, G.997.1) of the E-side cable run between the exchange and a remote cabinet hosting the xTU-C, in 0.5 dB steps from 0 to 255.5 dB. This value drives the shaped downstream power back-off (DPBOSHAPED) mask; setting it to zero disables downstream PBO on this line.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.300.80.1.20.1.5 snmpwalk -v2c -c public <target> PEA-VDSL-IPDSLAM::vdslLineConfPhysVdslPboPsdDnEsel
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.300.80.1.20.1.5.1 snmpget -v2c -c public <target> PEA-VDSL-IPDSLAM::vdslLineConfPhysVdslPboPsdDnEsel.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.193.72.300.80.1.20.1.5.1 i <value>
Start monitoring Ericsson Diax IP DSLAM, VDSL/VDSL2 access equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-VDSL-IPDSLAM::vdslLineConfPhysVdslPboPsdDnEsel OID value, configure state conditions and alerts, and monitor any Ericsson Diax IP DSLAM, VDSL/VDSL2 access equipment from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.300 | peaIpDslam | DIESEL-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.72.300.80 | peaVdslIpDslam | PEA-VDSL-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.80.1 | vdslObjects | PEA-VDSL-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.80.1.20 | vdslLineConfPhysVdslPboPsdDnTable | PEA-VDSL-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.80.1.20.1 | vdslLineConfPhysVdslPboPsdDnEntry | PEA-VDSL-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.80.1.20.1.5 | vdslLineConfPhysVdslPboPsdDnEsel | PEA-VDSL-IPDSLAM |