All MIBs › PEA-VDSL-IPDSLAM › vdsl2SCStatusGainAlloc
vdsl2SCStatusGainAlloc
Module: PEA-VDSL-IPDSLAM
OID (symbolic): PEA-VDSL-IPDSLAM::vdsl2SCStatusGainAlloc
OID (numeric): 1.3.6.1.4.1.193.72.300.80.2.5.1.15
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The gain allocation per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. When more then 512 sub-carriers are supported, the status information is reported through multiple (up to 8) segments. The first segment is then used for the first 512 sub-carriers. The second segment is used for the sub-carriers 512 to 1023 and so on. The aggregate number of utilized octets on downstream direction depends on NSds, and on upstream direction it depends on NSus. This value is referred here as NS. The segment number is in vdsl2SCStatusSegment. Value i (0 <= i < MIN(NS-(segment-1)*512,512)) in each segment is set to a value in the range 0 to 4093 to indicate that the respective downstream or upstream sub-carrier j (j=(segement-1)*512+i) has the same amount of gain value. The gain value is represented as a multiple of 1/512 on linear scale. Each value in this array is 16 bits wide and is stored in big endian format. This table is from draft-ietf-adslmib-vdsl2-01.txt.
What is vdsl2SCStatusGainAlloc?
Returns the gain applied per sub-carrier as a raw array of 16-bit big-endian values (up to 512 values, segmented via vdsl2SCStatusSegment on lines with more subcarriers), each expressed as a multiple of 1/512 on a linear scale. Used alongside vdsl2SCStatusBitsAlloc and vdsl2SCStatusSnr for detailed per-tone diagnostics of the bit-loading algorithm's behavior.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.300.80.2.5.1.15 snmpwalk -v2c -c public <target> PEA-VDSL-IPDSLAM::vdsl2SCStatusGainAlloc
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.300.80.2.5.1.15.1 snmpget -v2c -c public <target> PEA-VDSL-IPDSLAM::vdsl2SCStatusGainAlloc.1
Start monitoring Ericsson Diax IP DSLAM, VDSL/VDSL2 access equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-VDSL-IPDSLAM::vdsl2SCStatusGainAlloc OID value, configure state conditions and alerts, and monitor any Ericsson Diax IP DSLAM, VDSL/VDSL2 access equipment from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.300 | peaIpDslam | DIESEL-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.72.300.80 | peaVdslIpDslam | PEA-VDSL-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.80.2 | vdsl2Status | PEA-VDSL-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.80.2.5 | vdsl2SCStatusTable | PEA-VDSL-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.80.2.5.1 | vdsl2SCStatusEntry | PEA-VDSL-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.80.2.5.1.15 | vdsl2SCStatusGainAlloc | PEA-VDSL-IPDSLAM |