PEA-VDSL-IPDSLAM :: miscVdslConfEnableProfileBitmap

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › PEA-VDSL-IPDSLAM › miscVdslConfEnableProfileBitmap

miscVdslConfEnableProfileBitmap

Module: PEA-VDSL-IPDSLAM

OID (symbolic): PEA-VDSL-IPDSLAM::miscVdslConfEnableProfileBitmap

OID (numeric): 1.3.6.1.4.1.193.72.300.80.1.8.1.10

Node type: OBJECT-TYPE

Type: Bits

Access: read-write

Description: VDSL2 profiles to be allowed by the near-end xTU on this line. It is coded in a bit map representation (0 if not allowed, 1 if allowed) as defined in G.997.1 (third revision), section 7.3.1.1.11: NOTE that profile 30a is not supported in EDA. BIT PROFILE 7 G.993.2 Profile 8a. 6 G.993.2 Profile 8b. 5 G.993.2 Profile 8c. 4 G.993.2 Profile 8d. 3 G.993.2 Profile 12a. 2 G.993.2 Profile 12b. 1 G.993.2 Profile 17a. 0 G.993.2 Profile 30a. Valid from: EDA 4.0

What is miscVdslConfEnableProfileBitmap?

A bitmask (G.997.1 7.3.1.1.11 encoding) of which VDSL2 profiles -- 8a through 30a, 12a/12b, 17a -- the near-end transceiver is allowed to negotiate on this line; a set bit means that profile is permitted. An admin restricts this to, say, only profile 17a on a line where a faster but less-standard profile causes interop trouble with the installed CPE; note profile 30a is flagged as unsupported on this platform.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.300.80.1.8.1.10
snmpwalk -v2c -c public <target> PEA-VDSL-IPDSLAM::miscVdslConfEnableProfileBitmap

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.300.80.1.8.1.10.1
snmpget -v2c -c public <target> PEA-VDSL-IPDSLAM::miscVdslConfEnableProfileBitmap.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.193.72.300.80.1.8.1.10.1 s <value>

Start monitoring Ericsson Diax IP DSLAM, VDSL/VDSL2 access equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-VDSL-IPDSLAM::miscVdslConfEnableProfileBitmap OID value, configure state conditions and alerts, and monitor any Ericsson Diax IP DSLAM, VDSL/VDSL2 access equipment from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.193ericssonANS-COMMON-MIB
1.3.6.1.4.1.193.72diaxMIBDXD-SMI
1.3.6.1.4.1.193.72.300peaIpDslamDIESEL-SMI
Numeric OIDNameModule
1.3.6.1.4.1.193.72.300.80peaVdslIpDslamPEA-VDSL-IPDSLAM
1.3.6.1.4.1.193.72.300.80.1vdslObjectsPEA-VDSL-IPDSLAM
1.3.6.1.4.1.193.72.300.80.1.8vdslLineConfPhysVdslMiscVdslConfTablePEA-VDSL-IPDSLAM
1.3.6.1.4.1.193.72.300.80.1.8.1vdslLineConfPhysVdslMiscVdslConfEntryPEA-VDSL-IPDSLAM
1.3.6.1.4.1.193.72.300.80.1.8.1.10miscVdslConfEnableProfileBitmapPEA-VDSL-IPDSLAM