All MIBs › PEA-VDSL-IPDSLAM › miscPhysStatusVdslProfileBitmap
miscPhysStatusVdslProfileBitmap
Module: PEA-VDSL-IPDSLAM
OID (symbolic): PEA-VDSL-IPDSLAM::miscPhysStatusVdslProfileBitmap
OID (numeric): 1.3.6.1.4.1.193.72.300.80.1.60.1.5
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: VDSL2 profiles to be allowed by the near-end xTU on this line. It is coded in a bit map representation (0 if not allowed, 1 if allowed) as defined in G.997.1 (third revision), section 7.3.1.1.11: NOTE that profile 30a is not supported in EDA. BIT PROFILE 7 G.993.2 Profile 8a. 6 G.993.2 Profile 8b. 5 G.993.2 Profile 8c. 4 G.993.2 Profile 8d. 3 G.993.2 Profile 12a. 2 G.993.2 Profile 12b. 1 G.993.2 Profile 17a. 0 G.993.2 Profile 30a. Valid from: EDA 4.0
What is miscPhysStatusVdslProfileBitmap?
Reports which VDSL2 profiles (8a through 30a, 12a/12b, 17a) the near-end transceiver is actually operating with allowed on this line right now, using the same G.997.1 bit encoding as the configured miscVdslConfEnableProfileBitmap. An admin compares this read-only status against the configured allow-list to confirm the negotiated profile set matches what was intended; profile 30a is flagged as unsupported on this platform.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.300.80.1.60.1.5 snmpwalk -v2c -c public <target> PEA-VDSL-IPDSLAM::miscPhysStatusVdslProfileBitmap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.300.80.1.60.1.5.1 snmpget -v2c -c public <target> PEA-VDSL-IPDSLAM::miscPhysStatusVdslProfileBitmap.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> miscPhysStatusVdslProfileBitmap.1
Start monitoring Ericsson Diax IP DSLAM, VDSL/VDSL2 access equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-VDSL-IPDSLAM::miscPhysStatusVdslProfileBitmap OID value, configure state conditions and alerts, and monitor any Ericsson Diax IP DSLAM, VDSL/VDSL2 access equipment from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.300 | peaIpDslam | DIESEL-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.72.300.80 | peaVdslIpDslam | PEA-VDSL-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.80.1 | vdslObjects | PEA-VDSL-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.80.1.60 | vdslLineMiscPhysStatusTable | PEA-VDSL-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.80.1.60.1 | vdslLineMiscPhysStatusEntry | PEA-VDSL-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.80.1.60.1.5 | miscPhysStatusVdslProfileBitmap | PEA-VDSL-IPDSLAM |