All MIBs › PEA-ADSL-IPDSLAM › adslAtucDspUnexpectedResponseTrap

adslAtucDspUnexpectedResponseTrap

OID (symbolic): PEA-ADSL-IPDSLAM::adslAtucDspUnexpectedResponseTrap

OID (numeric): 1.3.6.1.4.1.193.72.300.10.2.1.0.9

Node type: NOTIFICATION-TYPE

Description: DSP replies with an unexpected result code such as: 'unknown application id', 'unknown command id', 'wrong message format', 'request data not valid' or 'request cannot be performed in current state'. This should not happen and comes from either incompatible SW versions or state mismatch between UC and DSP due to internal SW problems. If necessary a LinkDown should proceed this fault.The line will be reset and possibly taken into service again. In case too many line resets have been performed a DSP Communication Failure shall be triggered and the DSP reset and reloaded. The operator must change the configuration settings.

Valid from: EDA 1.1R2A

Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Minor 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type Equipment 7: Probable cause UnexpectedInformation 8: Message ID (Internal message number) 9: Err Code (Additional error information)

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' PEA-ADSL-IPDSLAM::adslAtucDspUnexpectedResponseTrap
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.193.72.300.10.2.1.0.9

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:58724->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (216565092) 25 days, 1:34:10.92
  SNMPv2-MIB::snmpTrapOID.0 = OID: PEA-ADSL-IPDSLAM::adslAtucDspUnexpectedResponseTrap

Start monitoring Ericsson IP DSLAM, ADSL access multiplexer (ADSL modem-pair line quality) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-ADSL-IPDSLAM::adslAtucDspUnexpectedResponseTrap OID value, configure state conditions and alerts, and monitor any Ericsson IP DSLAM, ADSL access multiplexer (ADSL modem-pair line quality) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.193	ericsson	ANS-COMMON-MIB
1.3.6.1.4.1.193.72	diaxMIB	DXD-SMI
1.3.6.1.4.1.193.72.300	peaIpDslam	DIESEL-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.193.72.300.10	peaAdslIpDslam	PEA-ADSL-IPDSLAM
1.3.6.1.4.1.193.72.300.10.2	adslXTraps	PEA-ADSL-IPDSLAM
1.3.6.1.4.1.193.72.300.10.2.1	adslAtucXTraps	PEA-ADSL-IPDSLAM
1.3.6.1.4.1.193.72.300.10.2.1.0	adslAtucXTrapsEntry	PEA-ADSL-IPDSLAM
1.3.6.1.4.1.193.72.300.10.2.1.0.9	adslAtucDspUnexpectedResponseTrap	PEA-ADSL-IPDSLAM

PEA-ADSL-IPDSLAM :: adslAtucDspUnexpectedResponseTrap

adslAtucDspUnexpectedResponseTrap

Module

This MIB depends on