PEA-ADSL-IPDSLAM DEFINITIONS ::= BEGIN IMPORTS peaIpDslam FROM DIESEL-SMI lineIndex FROM PEA-BRIDGE-IPDSLAM messageId, errorCode FROM PEA-EQUIPMENT-IPDSLAM -- standar X.733 header for the traps managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause FROM PEM-STANDARD MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Gauge32,Integer32,Unsigned32, Counter32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF DisplayString FROM RFC1213-MIB adslAtucIntervalNumber, adslAturIntervalNumber, adslAtucChanIntervalNumber, adslAturChanIntervalNumber, adslLineConfProfileEntry, adslLineAlarmConfProfileEntry, adslAtucThresh15MinESs, adslAturThresh15MinESs, adslAtucThresh15MinLofs, adslAturThresh15MinLofs, adslAtucThresh15MinLoss, adslAturThresh15MinLoss, adslAtucThresh15MinLols, adslAturThresh15MinLprs, adslAtucChanCurrTxRate, adslAturChanCurrTxRate FROM ADSL-LINE-MIB adslAtucThreshold15MinSesL, adslAtucThreshold15MinUasL, adslAturThreshold15MinSesL, adslAturThreshold15MinUasL FROM ADSL-LINE-EXT-MIB; peaAdslIpDslam MODULE-IDENTITY LAST-UPDATED "200405031200Z" ORGANIZATION "Ericsson Danmark A/S - Denmark" CONTACT-INFO " Ericsson Danmark A/S Faelledvej 17 DK-7600 Struer Denmark E-mail: diax.support@ericsson.com " DESCRIPTION " The IP DSLAM software supports a number of standard and proprietary MIBs. The MIB module defines objects for the management of a pair of ADSL modems at each end of the ADSL line and is an extension to the ADSL-LINE-MIB (RFC2662). The reason for this MIB module is that the original ADSL-LINE- MIB is not conforming to the G.997.1 standard. The draft extension MIB (RFC2662) is not released yet and is also lacking parameters defined in the G.997.1. One naming convention was added to those from the ADSL-LINE-MIB: an 'X' from 'extension' is added to all names. " ::= { peaIpDslam 10 } adslXObjects OBJECT IDENTIFIER ::= { peaAdslIpDslam 1 } adslXTraps OBJECT IDENTIFIER ::= { peaAdslIpDslam 2 } adslXObjectsGroups OBJECT IDENTIFIER ::= { peaAdslIpDslam 3 } adslXTrapsGroups OBJECT IDENTIFIER ::= { peaAdslIpDslam 4 } TonePartIdIndex ::= INTEGER(0..2147483646) --****************************************************************** -- TEXTUAL-CONVENTIONs are copied instead of imported because of -- Idbgen tool. --****************************************************************** PerfCurrentCount ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A counter associated with a performance measurement in a current 15 minute measurement interval. The value of this counter starts from zero and is increased when associated events occur, until the end of the 15 minute interval. At that time the value of the counter is stored in the first 15 minute history interval, and the CurrentCount is restarted at zero. In the case where the agent has no valid data available for the current interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation)." SYNTAX Gauge32 PerfIntervalCount ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A counter associated with a performance measurement in a previous 15 minute measurement interval. In the case where the agent has no valid data available for a particular interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation). In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 15 minute interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount - the TotalCount, if supported, is adjusted." SYNTAX Gauge32 Perf1DayIntervalXCount ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A counter associated with a performance measurement in a previous 1-day (24 hour) measurement interval. In a system supporting a history of n intervals is IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a 1 day interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i-1) for n >= i > 1 - the value of IntervalCount(1) becomes that of CurrentCount." SYNTAX Gauge32 AdslPerfCurrDayCount ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A counter associated with interface performance measurements in a current 1-day (24 hour) measurement interval. The value of this counter starts at zero at the beginning of an interval and is increased when associated events occur, until the end of the 1-day interval. At that time the value of the counter is stored in the previous 1-day history interval, if available, and the current interval counter is restarted at zero. In the case where the agent has no valid data available for this interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation)." SYNTAX Gauge32 AdslPerfPrevDayCount ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A counter associated with interface performance measurements during the most previous 1-day (24 hour) measurement interval. The value of this counter is equal to the value of the current day counter at the end of its most recent interval. In the case where the agent has no valid data available for this interval the corresponding object instance is not available and upon a retrieval request a corresponding error message shall be returned to indicate that this instance does not exist (for example, a noSuchName error for SNMPv1 and a noSuchInstance for SNMPv2 GET operation)." SYNTAX Gauge32 AdslTransmissionModeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A set of ADSL line transmission modes, with one bit per mode. The notes (F) and (L) denote Full-Rate and G.Lite respectively: Bit 00 : Regional Std. (ANSI T1.413) (F) Bit 01 : Regional Std. (ETSI DTS/TM06006) (F) Bit 02 : G.992.1 POTS non-overlapped (F) Bit 03 : G.992.1 POTS overlapped (F) Bit 04 : G.992.1 ISDN non-overlapped (F) Bit 05 : G.992.1 ISDN overlapped (F) Bit 06 : G.992.1 TCM-ISDN non-overlapped (F) Bit 07 : G.992.1 TCM-ISDN overlapped (F) Bit 08 : G.992.2 POTS non-overlapped (L) Bit 09 : G.992.2 POTS overlapped (L) Bit 10 : G.992.2 with TCM-ISDN non-overlapped (L) Bit 11 : G.992.2 with TCM-ISDN overlapped (L) Bit 12 : G.992.1 TCM-ISDN symmetric (F) " SYNTAX BITS { ansit1413(0), etsi(1), q9921PotsNonOverlapped(2), q9921PotsOverlapped(3), q9921IsdnNonOverlapped(4), q9921isdnOverlapped(5), q9921tcmIsdnNonOverlapped(6), q9921tcmIsdnOverlapped(7), q9922potsNonOverlapeed(8), q9922potsOverlapped(9), q9922tcmIsdnNonOverlapped(10), q9922tcmIsdnOverlapped(11), q9921tcmIsdnSymmetric(12) } SnmpAdminString ::= TEXTUAL-CONVENTION DISPLAY-HINT "255a" STATUS current DESCRIPTION "An octet string containing administrative information, preferably in human-readable form. To facilitate internationalization, this information is represented using the ISO/IEC IS 10646-1 character set, encoded as an octet string using the UTF-8 transformation format described in [RFC2279]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations must be prepared to encounter any code point from 0x00000000 to 0x7fffffff. Byte sequences that do not correspond to the valid UTF-8 encoding of a code point or are outside this range are prohibited. The use of control codes should be avoided. When it is necessary to represent a newline, the control code sequence CR LF should be used. The use of leading or trailing white space should be avoided. For code points not directly supported by user interface hardware or software, an alternative means of entry and display, such as hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the UTF-8 encoding is identical to the US-ASCII encoding. UTF-8 may require multiple bytes to represent a single character / code point; thus the length of this object in octets may be different from the number of characters encoded. Similarly, size constraints refer to the number of encoded octets, not the number of characters represented by an encoding. Note that when this TC is used for an object that is used or envisioned to be used as an index, then a SIZE restriction MUST be specified so that the number of sub-identifiers for any object instance does not exceed the limit of 128, as defined by [RFC1905]. Note that the size of an SnmpAdminString object is measured in octets, not characters. " SYNTAX OCTET STRING (SIZE (0..255)) -- ProtocolMap now defined in adslLineXTransAtucCap, adslLineXTransAtucConfig, -- adslLineXTransAtucConfig and adslLineXTransAturCap because of -- browser interpretation. ProtocolMap ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A set of supported protocols in the Broadcom ADSL chipset: Bit[31] : ITU-T ADSL over POTS(G.992.1 Annex A) Bit[30] : ITU-T ADSL over ISDN(G.992.1 Annex B) Bit[29] : ITU-T ADSL over TCM-ISDN(G.992.1 Annex C) Bit[28] : ITU-T ADSL Lite over POTS(G.992.2 Annex A) Bit[27] : ITU-T ADSL Lite over TCM-ISDN(G.992.2 Annex C) Bit[26] : ITU-T SSDSL over TCM-ISDN(G.992.1 Annex H) Bit[25] : ITU-T G.992.1 Annex I Bit[25] : ITU-T G.993.2 VDSL2 Bit[23] : ITU-T SHDSL North America(G.991.2 Annex A) Bit[22] : ITU-T SHDSL Europe(G.991.2 Annex B) Bit[21] : T1 MCM VDSL Bit[19] : ETSI MCM VDSL Bit[15] : ITU-T ADSL2 over POTS(G.992.3 Annex A) Bit[14] : ITU-T ADSL2 over ISDN(G.992.3 Annex B) Bit[13] : ITU-T ADSL2 ADM with POTS(G.992.3 Annex I) Bit[12] : ITU-T ADSL2 ADM with ISDN(G.992.3 Annex J) Bit[11] : ITU-T ADSL2 Lite over POTS(G.992.4 Annex A) Bit[10] : ITU-T ADSL2 Lite ADM with POTS(G.992.4 Annex I) Bit[09] : ITU-T ADSL2 RE over POTS(G.992.3 Annex L) Bit[07] : ITU-T ADSL2+ over POTS(G.992.5 Annex A) Bit[06] : ITU-T ADSL2+ over ISDN(G.992.5 Annex B) Bit[05] : ITU-T ADSL2+ over ----(G.992.5 Annex I) Bit[02] : SADSL over POTS Bit[01] : ANSI ADSL over POTS(ANSI T1.413) Bit[00] : ETSI TS 101 388 " SYNTAX BITS { etsiTS101388(0), ansiT1413AdslOverPots(1), proprietarySadslOverPots(2), reserved3(3), g9925AnnexMAdsl2PlusOver(4), g9925AnnexIAdsl2PlusOver(5), g9925AnnexBAdsl2PlusOverIsdn(6), g9925AnnexAAdsl2PlusOverPots(7), g9923AnnexLAdsl2RENarrowPsdOverPots(8), g9923AnnexLAdsl2REOverPots(9), g9924AnnexIAdsl2LiteAdmWithPots(10), g9924AnnexAAdsl2LiteOverPots(11), g9923AnnexMAdsl2AdmWithIsdn(12), g9923AnnexIAdsl2AdmWithPots(13), g9923AnnexBAdsl2OverIsdn(14), g9923AnnexAAdsl2OverPots(15), reserved16(16), reserved17(17), reserved18(18), etsiMcmVDSL(19), reserved20(20), t1McmVDSL(21), g99212AnnexBShdslOverTcmIsdnEu(22), g99212AnnexAShdslOverTcmIsdnUs(23), g9923VDSL2(24), g9921AnnexISsdslOverTcmIsdn(25), g9921AnnexHSsdslOverTcmIsdn(26), g9922AnnexCAdslLiteOverTcmIsdn(27), g9922AnnexAAdslLiteOverPots(28), g9921AnnexCAdslOverTcmIsdn(29), g9921AnnexBAdslOverIsdn(30), g9921AnnexAAdslOverPots(31) } --****************************************************************** -- ADSL ATU-C Physical Extension --****************************************************************** adslAtucPhysXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtucPhysXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides extra information in relation to the adslAtucPhysTable for ADSL lines." ::= { adslXObjects 1 } adslAtucPhysXEntry OBJECT-TYPE SYNTAX AdslAtucPhysXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslAtucPhysXTable." INDEX { lineIndex } ::= { adslAtucPhysXTable 1 } AdslAtucPhysXEntry ::= SEQUENCE { adslAtucPhysXPreviousSnrMgn INTEGER, adslAtucPhysXPreviousOutputPwr INTEGER, adslAtucPhysXBitAllocTable OCTET STRING, adslAtucPhysXSnr OCTET STRING, adslAtucPhysXLoopAtn INTEGER } adslAtucPhysXPreviousSnrMgn OBJECT-TYPE SYNTAX INTEGER (-640..640) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the previous signal to noise margin for the ATU-C, i.e the total SNR margin recorded when the last synchronisation of the line was carried out." ::= { adslAtucPhysXEntry 1 } adslAtucPhysXPreviousOutputPwr OBJECT-TYPE SYNTAX INTEGER (-310..310) UNITS "tenth dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the previous measured total output power transmitted by the ATU-C, i.e the total output power recorded when the last synchronisation of the line was carried out." ::= { adslAtucPhysXEntry 2 } adslAtucPhysXBitAllocTable OBJECT-TYPE SYNTAX OCTET STRING (SIZE (64)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Upstream bit allocation table. Substituted by adslAtucPhysXBitAllocation in HMI 9.x" ::= { adslAtucPhysXEntry 3 } adslAtucPhysXSnr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) UNITS "1/256 dB" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "SNR measured in the upstream band. There are 64 tones in the upstream band and every tone is represented by 4 octets. Substituted by adslAtucPhysXToneSnrUs in HMI 9.x" ::= { adslAtucPhysXEntry 4 } adslAtucPhysXLoopAtn OBJECT-TYPE SYNTAX INTEGER (0..630) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Upstream loop attenuation. Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU." ::= { adslAtucPhysXEntry 5 } --****************************************************************** -- ADSL ATU-R Physical Extension --****************************************************************** adslAturPhysXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAturPhysXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides extra information in relation to the adslAturPhysTable for ADSL lines." ::= { adslXObjects 2 } adslAturPhysXEntry OBJECT-TYPE SYNTAX AdslAturPhysXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslAturPhysXTable." INDEX { lineIndex } ::= { adslAturPhysXTable 1 } AdslAturPhysXEntry ::= SEQUENCE { -- adslLineTransAturCapabilities AdslTransmissionModeType, adslAturPhysXPreviousSnrMgn INTEGER, adslAturPhysXPreviousOutputPwr INTEGER, adslAturPhysXBitAllocTable OCTET STRING, adslAturPhysXBitAllocTableExt OCTET STRING, adslAturPhysXLoopAtn INTEGER } --adslLineTransAturCapabilities OBJECT-TYPE -- SYNTAX AdslTransmissionModeType -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The transmission modes, represented by a -- bitmask that the ATU-R is capable of -- supporting. The modes available are limited -- by the design of the equipment." -- REFERENCE "Section 7.3.2 ITU G.997.1" -- ::= { adslAturPhysXEntry 1 } adslAturPhysXPreviousSnrMgn OBJECT-TYPE SYNTAX INTEGER (-640..640) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the previous signal to noise margin for the ATU-R, i.e the total SNR margin recorded when the last synchronisation of the line was carried out." ::= { adslAturPhysXEntry 2 } adslAturPhysXPreviousOutputPwr OBJECT-TYPE SYNTAX INTEGER (-310..310) UNITS "tenth dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the previous measured total output power transmitted by the ATU-R, i.e the total output power recorded when the last synchronisation of the line was carried out." ::= { adslAturPhysXEntry 3 } adslAturPhysXBitAllocTable OBJECT-TYPE SYNTAX OCTET STRING (SIZE (256)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Downstream bit allocation table, tones 0-255 Substituted by adslAturPhysXBitAllocation in HMI 9.x" ::= { adslAturPhysXEntry 4 } adslAturPhysXBitAllocTableExt OBJECT-TYPE SYNTAX OCTET STRING (SIZE (256)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Downstream bit allocation table, tones 256-511 Substituted by adslAturPhysXBitAllocation in HMI 9.x" ::= { adslAturPhysXEntry 5 } adslAturPhysXLoopAtn OBJECT-TYPE SYNTAX INTEGER (0..630) UNITS "tenth dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Downstream loop attenuation. Measured difference in the total power transmitted by this ATU and the total power received by the peer ATU." ::= { adslAturPhysXEntry 6 } --****************************************************************** -- ADSL Line Configuration Profile Extension --****************************************************************** adslLineConfProfileXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslLineConfProfileXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides extra information in relation to the adslLineConfProfileTable for ADSL line configuration profile." ::= { adslXObjects 3 } adslLineConfProfileXEntry OBJECT-TYPE SYNTAX AdslLineConfProfileXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to an ADSL line configuration profile. Each profile contains a set of ADSL line configuration parameters. The configuration parameters in a profile are applied to those lines referencing that profile." AUGMENTS { adslLineConfProfileEntry } ::= {adslLineConfProfileXTable 1 } AdslLineConfProfileXEntry ::= SEQUENCE { adslConfXName SnmpAdminString, adslConfXAtucFrequencyBins DisplayString, adslConfXAturFrequencyBins DisplayString, adslConfXFrequencyBins DisplayString, adslPowerManagementMode INTEGER, adslPrmMode INTEGER, adslPrmPower INTEGER } adslConfXName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the unique profile name associated with this profile." ::= { adslLineConfProfileXEntry 1} adslConfXAtucFrequencyBins OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object consists of a bitmap of 512 bits, where each bit disables or enables one carrier in the downstream (ATU-C) direction. 1 enables the carrier and 0 disables it. Each bitmap is represented as a list of 64 bytes, each representing a bitmap of 8 bits. The first byte of the list represents carriers 0-7, the second byte represents carriers 8-15, etc. The last byte represents carriers 504-511. In each byte, the LSB represents the lowest carrier in the range, while the MSB represents the highest carrier in the range." ::= { adslLineConfProfileXEntry 2 } adslConfXAturFrequencyBins OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object consists of a bitmap of 64 bits, where each bit disables or enables one carrier in the upstream (ATU-R) direction. 1 enables the carrier and 0 disables it. Each bitmap is represented as a list of 8 bytes, each representing a bitmap of 8 bits. The first byte of the list represents carriers 0-7, the second byte represents carriers 8-15, etc. The last byte represents carriers 56-63. In each byte, the LSB represents the lowest carrier in the range, while the MSB represents the highest carrier in the range." ::= { adslLineConfProfileXEntry 3 } adslConfXFrequencyBins OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS obsolete DESCRIPTION "This object consists of a bitmap of 256 bits, where each bit disables or enables one carrier. One enables the carrier and zero disables it. The distribution between up- and downstream carriers is autonomously done in the CO-chipset, based upon the selected protocol. Each bitmap is represented as a list of 32 bytes, each representing a bitmap of 8 bits. The first byte of the list represents carriers 0-7, the second byte represents carriers 8-15, etc. The last byte represents carriers 248-255. In each byte, the LSB represents the lowest carrier in the range, while the MSB represents the highest carrier in the range." ::= { adslLineConfProfileXEntry 4 } adslPowerManagementMode OBJECT-TYPE SYNTAX INTEGER { disableL2AndL3(0), enableL3(1), enableL2(2), enableL2AndL3(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Power Management State Enabling (PMMode) as defined in G.997.1 (7.3.1.1.4). Only L2 mode is supported." ::= { adslLineConfProfileXEntry 5 } adslPrmMode OBJECT-TYPE SYNTAX INTEGER { disablePrmProtect(0), enable12kHzPrmProtect(1), enable16kHzPrmProtect(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Disable or enable protection for a specific PRM frequency " ::= { adslLineConfProfileXEntry 6 } adslPrmPower OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the power level of the PRM signal. Approximation: prmPower ~ 1000 * (Vrms^2). Valid range: 0 to (2E32)-1." ::= { adslLineConfProfileXEntry 7 } --****************************************************************** -- ADSL Line Alarm Configuration Profile Extension --****************************************************************** adslLineAlarmConfProfileXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslLineAlarmConfProfileXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides extra information in relation to the adslLineAlarmConfProfileTable for an ADSL alarm configuration profile." ::= { adslXObjects 4 } adslLineAlarmConfProfileXEntry OBJECT-TYPE SYNTAX AdslLineAlarmConfProfileXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry corresponds to an ADSL line alarm configuration profile. Each profile contains a set of ADSL line alarm configuration parameters. The configuration parameters in a profile are applied to those lines referencing that profile." AUGMENTS { adslLineAlarmConfProfileEntry } ::= {adslLineAlarmConfProfileXTable 1 } AdslLineAlarmConfProfileXEntry ::= SEQUENCE { adslAlarmConfXName SnmpAdminString, adslAlarmConfXAtucThres1DayES INTEGER, adslAlarmConfXAturThres1DayES INTEGER, adslAlarmConfXAtucThres1DaySesL INTEGER, adslAlarmConfXAturThres1DaySesL INTEGER, adslAlarmConfXAtucThres1DayUasL INTEGER, adslAlarmConfXAturThres1DayUasL INTEGER, adslAlarmConfXAtucThres1DayLofs INTEGER, adslAlarmConfXAturThres1DayLofs INTEGER, adslAlarmConfXAtucThres1DayLoss INTEGER, adslAlarmConfXAturThres1DayLoss INTEGER, adslAlarmConfXAtucThres1DayLols INTEGER, adslAlarmConfXAturThres1DayLprs INTEGER } adslAlarmConfXName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the unique profile name associated with this profile." ::= { adslLineAlarmConfProfileXEntry 1} adslAlarmConfXAtucThres1DayES OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Errored Seconds encountered by an ADSL interface within the 24 hour (1 day) data collection period, which causes the SNMP agent to send an adslAtucPerfXESsThresh1DayTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileXEntry 2 } adslAlarmConfXAturThres1DayES OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Errored Seconds encountered by an ADSL interface within the 24 hour (1 day) data collection period, which causes the SNMP agent to send an adslAturPerfXESsThresh1DayTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileXEntry 3 } adslAlarmConfXAtucThres1DaySesL OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Severely Errored Seconds encountered by an ADSL interface within the 24 hour (1 day) data collection period, which causes the SNMP agent to send an adslAturPerfXSesThresh1DayTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileXEntry 7 } adslAlarmConfXAturThres1DaySesL OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Severely Errored Seconds encountered by an ADSL interface within the 24 hour (1 day) data collection period, which causes the SNMP agent to send an adslAturPerfXSesThresh1DayTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileXEntry 8 } adslAlarmConfXAtucThres1DayUasL OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by an ADSL interface within the 24 hour (1 day) data collection period, which causes the SNMP agent to send an adslAturPerfXUasThresh1DayTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileXEntry 9 } adslAlarmConfXAturThres1DayUasL OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Unavailable Seconds encountered by an ADSL interface within the 24 hour (1 day) data collection period, which causes the SNMP agent to send an adslAturPerfXUasThresh1DayTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileXEntry 10 } adslAlarmConfXAtucThres1DayLofs OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Loss of Frame Seconds encountered by an ADSL interface within the 24 hour (1 day) data collection period, which causes the SNMP agent to send an adslAtucPerfXLofsThresh1DayTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileXEntry 15 } adslAlarmConfXAturThres1DayLofs OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Loss of Frame Seconds encountered by an ADSL interface within the 24 hour (1 day) data collection period, which causes the SNMP agent to send an adslAturPerfXLofsThresh1DayTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileXEntry 20 } adslAlarmConfXAtucThres1DayLoss OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Loss of Signal Seconds encountered by an ADSL interface within the 24 hour (1 day) data collection period, which causes the SNMP agent to send an adslAtucPerfXLossThresh1DayTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileXEntry 25 } adslAlarmConfXAturThres1DayLoss OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Loss of Signal Seconds encountered by an ADSL interface within the 24 hour (1 day) data collection period, which causes the SNMP agent to send an adslAturPerfXLossThresh1DayTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileXEntry 30 } adslAlarmConfXAtucThres1DayLols OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Loss of Link Seconds encountered by an ADSL interface within the 24 hour (1 day) data collection period, which causes the SNMP agent to send an adslAtucPerfXLolsThresh1DayTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileXEntry 35 } adslAlarmConfXAturThres1DayLprs OBJECT-TYPE SYNTAX INTEGER (0..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of Loss of Power Seconds encountered by an ADSL interface within the 24 hour (1 day) data collection period, which causes the SNMP agent to send an adslAturPerfXLprsThresh1DayTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap." ::= { adslLineAlarmConfProfileXEntry 40 } --****************************************************************** -- ADSL ATU-C Performance Data Extension --****************************************************************** adslAtucPerfDataXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtucPerfDataXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides extra information in relation to the adslAtucPerfDataTable for each ATU-C." ::= { adslXObjects 6 } adslAtucPerfDataXEntry OBJECT-TYPE SYNTAX AdslAtucPerfDataXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslAtucPerfDataXTable." INDEX { lineIndex } ::= { adslAtucPerfDataXTable 1 } AdslAtucPerfDataXEntry ::= SEQUENCE { adslAtucPerfXEcs PerfCurrentCount, adslAtucPerfXCurr15MinEcs PerfCurrentCount, adslAtucPerfXCurr1DayEcs AdslPerfCurrDayCount, adslAtucPerfXPrev1DayEcs AdslPerfPrevDayCount, adslAtucPerfX1DayValidIntervals INTEGER, adslAtucPerfX1DayInvalidIntervals INTEGER } adslAtucPerfXEcs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of forward error correction seconds since agent reset." ::= { adslAtucPerfDataXEntry 1 } adslAtucPerfXCurr15MinEcs OBJECT-TYPE SYNTAX PerfCurrentCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of forward error correction seconds in the current 15 minute interval." ::= { adslAtucPerfDataXEntry 2 } adslAtucPerfXCurr1DayEcs OBJECT-TYPE SYNTAX AdslPerfCurrDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of forward error correction seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed." ::= { adslAtucPerfDataXEntry 3 } adslAtucPerfXPrev1DayEcs OBJECT-TYPE SYNTAX AdslPerfPrevDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of forward error correction seconds in the interval within the most recent previous 1-day period." ::= { adslAtucPerfDataXEntry 4 } adslAtucPerfX1DayValidIntervals OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of previous 1 day intervals in the 1 day interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last days, in which case the value will be the number of complete 1-day intervals for which the agent has at least some data." ::= { adslAtucPerfDataXEntry 10 } adslAtucPerfX1DayInvalidIntervals OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of intervals in the range from 0 to the value of adslAtucPerfX1DayValidIntervals for which no data is available." ::= { adslAtucPerfDataXEntry 15 } --****************************************************************** -- ADSL ATU-R Performance Data Extension --****************************************************************** adslAturPerfDataXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAturPerfDataXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides extra information in relation to the adslAturPerfDataTable for each ATU-R." ::= { adslXObjects 7 } adslAturPerfDataXEntry OBJECT-TYPE SYNTAX AdslAturPerfDataXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslAturPerfDataXTable." INDEX { lineIndex } ::= { adslAturPerfDataXTable 1 } AdslAturPerfDataXEntry ::= SEQUENCE { adslAturPerfXEcs PerfCurrentCount, adslAturPerfXCurr15MinEcs PerfCurrentCount, adslAturPerfXCurr1DayEcs AdslPerfCurrDayCount, adslAturPerfXPrev1DayEcs AdslPerfPrevDayCount, adslAturPerfX1DayValidIntervals INTEGER, adslAturPerfX1DayInvalidIntervals INTEGER } adslAturPerfXEcs OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of forward error correction seconds since agent reset." ::= { adslAturPerfDataXEntry 1 } adslAturPerfXCurr15MinEcs OBJECT-TYPE SYNTAX PerfCurrentCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of forward error correction seconds in the current 15 minute interval." ::= { adslAturPerfDataXEntry 2 } adslAturPerfXCurr1DayEcs OBJECT-TYPE SYNTAX AdslPerfCurrDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of forward error correction seconds during the current day as measured by adslAturPerfCurr1DayTimeElapsed." ::= { adslAturPerfDataXEntry 3 } adslAturPerfXPrev1DayEcs OBJECT-TYPE SYNTAX AdslPerfPrevDayCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of forward error correction seconds in the interval within the most recent previous 1-day period." ::= { adslAturPerfDataXEntry 4 } adslAturPerfX1DayValidIntervals OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of previous 1 day intervals in the 1 day interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last days, in which case the value will be the number of complete 1-day intervals for which the agent has at least some data." ::= { adslAturPerfDataXEntry 10 } adslAturPerfX1DayInvalidIntervals OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of intervals in the range from 0 to the value of adslAturPerfX1DayValidIntervals for which no data is available." ::= { adslAturPerfDataXEntry 15 } --****************************************************************** -- ADSL ATU-C Interval Extension --****************************************************************** adslAtucIntervalXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtucIntervalXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides extra information in relation to the adslAtucIntervalTable for each ATU-C performance collection interval. Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. Interval number 1 is the only interval used currently." ::= { adslXObjects 8 } adslAtucIntervalXEntry OBJECT-TYPE SYNTAX AdslAtucIntervalXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAtucIntervalXTable." INDEX { lineIndex, adslAtucIntervalNumber } ::= { adslAtucIntervalXTable 1 } AdslAtucIntervalXEntry ::= SEQUENCE { adslAtucIntervalXEcs PerfIntervalCount } adslAtucIntervalXEcs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of forward error correction seconds in the interval." ::= { adslAtucIntervalXEntry 1 } --****************************************************************** -- ADSL ATU-R Interval Extension --****************************************************************** adslAturIntervalXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAturIntervalXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides extra information in relation to the adslAturIntervalTable for each ATU-R performance collection interval. Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. Interval number 1 is the only interval used currently." ::= { adslXObjects 9 } adslAturIntervalXEntry OBJECT-TYPE SYNTAX AdslAturIntervalXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAturIntervalXTable." INDEX { lineIndex, adslAturIntervalNumber } ::= { adslAturIntervalXTable 1 } AdslAturIntervalXEntry ::= SEQUENCE { adslAturIntervalXEcs PerfIntervalCount } adslAturIntervalXEcs OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of forward error correction seconds in the interval." ::= { adslAturIntervalXEntry 1 } --****************************************************************** -- ADSL ATU-C Channel Performance Data Extension --****************************************************************** adslAtucChanPerfDataXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtucChanPerfDataXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides extra ATU-C channel information in relation to the adslAtucChanPerfDataTable. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125)." ::= { adslXObjects 10 } adslAtucChanPerfDataXEntry OBJECT-TYPE SYNTAX AdslAtucChanPerfDataXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAtucChanPerfDataXTable." INDEX { lineIndex } ::= { adslAtucChanPerfDataXTable 1 } AdslAtucChanPerfDataXEntry ::= SEQUENCE { adslAtucChanPerfXCurr15MinHecv PerfCurrentCount, adslAtucChanPerfXCurr15MinTotalCells PerfCurrentCount, adslAtucChanPerfXCurr15MinTotalUserCells PerfCurrentCount, adslAtucChanPerfXCurr15MinOverFlowCells PerfCurrentCount, adslAtucChanPerfXCurr15MinIdleCells PerfCurrentCount, adslAtucChanPerfXCurr15MinIdleCellBitErrors PerfCurrentCount, adslAtucChanPerfXCurr1DayHecv AdslPerfCurrDayCount, adslAtucChanPerfXCurr1DayTotalCells AdslPerfCurrDayCount, adslAtucChanPerfXCurr1DayTotalUserCells AdslPerfCurrDayCount, adslAtucChanPerfXCurr1DayOverFlowCells AdslPerfCurrDayCount, adslAtucChanPerfXCurr1DayIdleCells AdslPerfCurrDayCount, adslAtucChanPerfXCurr1DayIdleCellBitErr AdslPerfCurrDayCount, adslAtucChanPerfXPrev1DayHecv AdslPerfPrevDayCount, adslAtucChanPerfXPrev1DayTotalCells AdslPerfPrevDayCount, adslAtucChanPerfXPrev1DayTotalUserCells AdslPerfPrevDayCount, adslAtucChanPerfXPrev1DayOverFlowCells PerfCurrentCount, adslAtucChanPerfXPrev1DayIdleCells AdslPerfPrevDayCount, adslAtucChanPerfXPrev1DayIdleCellBitErr AdslPerfPrevDayCount } adslAtucChanPerfXCurr15MinHecv OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all header error correction violations received on this channel within the current 15 minute interval." ::= { adslAtucChanPerfDataXEntry 1 } adslAtucChanPerfXCurr15MinTotalCells OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all ATM cells received on this channel within the current 15 minute interval." ::= { adslAtucChanPerfDataXEntry 2 } adslAtucChanPerfXCurr15MinTotalUserCells OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all valid non-idle ATM cells successfuly trasmited to the UTOPIA bus within the current 15 minute interval." ::= { adslAtucChanPerfDataXEntry 3 } adslAtucChanPerfXCurr15MinOverFlowCells OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count the number oc cells discarded due to the received UTOPIA FIFO being full within the current 15 minute interval." ::= { adslAtucChanPerfDataXEntry 16 } adslAtucChanPerfXCurr15MinIdleCells OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all idle ATM cells received on this channel within the current 15 minute interval." ::= { adslAtucChanPerfDataXEntry 4 } adslAtucChanPerfXCurr15MinIdleCellBitErrors OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count the number of bit errors in the payload of the valid idle ATM cells received on this channel within the current 15 minute interval. An approximate estimate of the BER is given by; idleCellBitErrors/(8*48*idleCells)" ::= { adslAtucChanPerfDataXEntry 5 } adslAtucChanPerfXCurr1DayHecv OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all header error correction violations received on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed." ::= { adslAtucChanPerfDataXEntry 6 } adslAtucChanPerfXCurr1DayTotalCells OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all ATM cells received on this channel during the current day." ::= { adslAtucChanPerfDataXEntry 7 } adslAtucChanPerfXCurr1DayTotalUserCells OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all valid non-idle ATM cells successfuly trasmited to the UTOPIA bus during the current day." ::= { adslAtucChanPerfDataXEntry 8 } adslAtucChanPerfXCurr1DayOverFlowCells OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count the number oc cells discarded due to the received UTOPIA FIFO being full during the current day." ::= { adslAtucChanPerfDataXEntry 17 } adslAtucChanPerfXCurr1DayIdleCells OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all idle ATM cells received on this channel during the current day." ::= { adslAtucChanPerfDataXEntry 9 } adslAtucChanPerfXCurr1DayIdleCellBitErr OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count the number of bit errors in the payload of the valid idle ATM cells received on this channel during the current day." ::= { adslAtucChanPerfDataXEntry 10 } adslAtucChanPerfXPrev1DayHecv OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all header error correction violations blocks received on this channel within the most recent previous 1-day period." ::= { adslAtucChanPerfDataXEntry 11 } adslAtucChanPerfXPrev1DayTotalCells OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all ATM cells received on this channel within the most recent previous 1-day period." ::= { adslAtucChanPerfDataXEntry 12 } adslAtucChanPerfXPrev1DayTotalUserCells OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all valid non-idle ATM cells successfuly trasmited to the UTOPIA bus within the most recent previous 1-day period." ::= { adslAtucChanPerfDataXEntry 13 } adslAtucChanPerfXPrev1DayOverFlowCells OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count the number oc cells discarded due to the received UTOPIA FIFO being full within the most recent previous 1-day period." ::= { adslAtucChanPerfDataXEntry 18 } adslAtucChanPerfXPrev1DayIdleCells OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all idle ATM cells received on this channel within the most recent previous 1-day period." ::= { adslAtucChanPerfDataXEntry 14 } adslAtucChanPerfXPrev1DayIdleCellBitErr OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count the number of bit errors in the payload of the valid idle ATM cells received on this channel within the most recent previous 1-day period." ::= { adslAtucChanPerfDataXEntry 15 } --****************************************************************** -- ADSL ATU-R Channel Performance Data Extension --****************************************************************** adslAturChanPerfDataXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAturChanPerfDataXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides extra ATU-R channel information in relation to the adslAturChanPerfDataTable. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125)." ::= { adslXObjects 11 } adslAturChanPerfDataXEntry OBJECT-TYPE SYNTAX AdslAturChanPerfDataXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAturChanPerfDataXTable." INDEX { lineIndex } ::= { adslAturChanPerfDataXTable 1 } AdslAturChanPerfDataXEntry ::= SEQUENCE { adslAturChanPerfXCurr15MinHecv PerfCurrentCount, adslAturChanPerfXCurr15MinTotalCells PerfCurrentCount, adslAturChanPerfXCurr15MinTotalUserCells PerfCurrentCount, adslAturChanPerfXCurr1DayHecv AdslPerfCurrDayCount, adslAturChanPerfXCurr1DayTotalCells AdslPerfCurrDayCount, adslAturChanPerfXCurr1DayTotalUserCells AdslPerfCurrDayCount, adslAturChanPerfXPrev1DayHecv AdslPerfPrevDayCount, adslAturChanPerfXPrev1DayTotalCells AdslPerfPrevDayCount, adslAturChanPerfXPrev1DayTotalUserCells AdslPerfPrevDayCount, adslAturChanPerfXCurr15MinIdleCellBitErrors PerfCurrentCount, adslAturChanPerfXCurr1DayIdleCellBitErr AdslPerfCurrDayCount, adslAturChanPerfXPrev1DayIdleCellBitErr AdslPerfPrevDayCount } adslAturChanPerfXCurr15MinHecv OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all header error correction violations received on this channel within the current 15 minute interval." ::= { adslAturChanPerfDataXEntry 1 } adslAturChanPerfXCurr15MinTotalCells OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all ATM cells received on this channel within the current 15 minute interval." ::= { adslAturChanPerfDataXEntry 2 } adslAturChanPerfXCurr15MinTotalUserCells OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all valid non-idle ATM cells successfuly received to the UTOPIA bus within the current 15 minute interval." ::= { adslAturChanPerfDataXEntry 3 } adslAturChanPerfXCurr1DayHecv OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all header error correction violations received on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed." ::= { adslAturChanPerfDataXEntry 4 } adslAturChanPerfXCurr1DayTotalCells OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all ATM cells received on this channel during the current day." ::= { adslAturChanPerfDataXEntry 5 } adslAturChanPerfXCurr1DayTotalUserCells OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all valid non-idle ATM cells successfuly received to the UTOPIA bus during the current day." ::= { adslAturChanPerfDataXEntry 6 } adslAturChanPerfXPrev1DayHecv OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all header error correction violations received on this channel within the most recent previous 1-day period." ::= { adslAturChanPerfDataXEntry 7 } adslAturChanPerfXPrev1DayTotalCells OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all ATM cells received on this channel within the most recent previous 1-day period." ::= { adslAturChanPerfDataXEntry 8 } adslAturChanPerfXPrev1DayTotalUserCells OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all valid non-idle ATM cells successfuly received to the UTOPIA bus within the most recent previous 1-day period." ::= { adslAturChanPerfDataXEntry 9 } adslAturChanPerfXCurr15MinIdleCellBitErrors OBJECT-TYPE SYNTAX PerfCurrentCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count the number of bit errors in the payload of the valid idle ATM cells received on this channel within the current 15 minute interval. An approximate estimate of the BER is given by; idleCellBitErrors/(8*48*idleCells) Applies to ADSL2 only" ::= { adslAturChanPerfDataXEntry 10 } adslAturChanPerfXCurr1DayIdleCellBitErr OBJECT-TYPE SYNTAX AdslPerfCurrDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count the number of bit errors in the payload of the valid idle ATM cells received on this channel during the current day. Applies to ADSL2 only." ::= { adslAturChanPerfDataXEntry 11 } adslAturChanPerfXPrev1DayIdleCellBitErr OBJECT-TYPE SYNTAX AdslPerfPrevDayCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count the number of bit errors in the payload of the valid idle ATM cells received on this channel within the most recent previous 1-day period. Applies to ADSL2 only." ::= { adslAturChanPerfDataXEntry 12 } --****************************************************************** -- ADSL ATU-C Channel Interval Extension --****************************************************************** adslAtucChanIntervalXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtucChanIntervalXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides extra information in relation to the adslAtucChanIntervalTable for each ATU-C channel's performance collection interval. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125). Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. Interval number 1 is the only interval used currently." ::= { adslXObjects 12 } adslAtucChanIntervalXEntry OBJECT-TYPE SYNTAX AdslAtucChanIntervalXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAtucChanIntervalXTable." INDEX { lineIndex, adslAtucChanIntervalNumber } ::= { adslAtucChanIntervalXTable 1 } AdslAtucChanIntervalXEntry ::= SEQUENCE { adslAtucChanIntervalXHecv PerfIntervalCount, adslAtucChanIntervalXTotalCells PerfIntervalCount, adslAtucChanIntervalXTotalUserCells PerfIntervalCount, adslAtucChanIntervalXOverFlowCells PerfIntervalCount, adslAtucChanIntervalXIdleCells PerfIntervalCount, adslAtucChanIntervalXIdleCellBitErrors PerfIntervalCount } adslAtucChanIntervalXHecv OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all header error correction violations received on this channel during this interval." ::= { adslAtucChanIntervalXEntry 1 } adslAtucChanIntervalXTotalCells OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all ATM cells received on this channel this interval." ::= { adslAtucChanIntervalXEntry 2 } adslAtucChanIntervalXTotalUserCells OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all valid non-idle ATM cells succesfully transmitted to the UTOPIA bus on this interval." ::= { adslAtucChanIntervalXEntry 3 } adslAtucChanIntervalXOverFlowCells OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count the number oc cells discarded due to the received UTOPIA FIFO being full on this interval." ::= { adslAtucChanIntervalXEntry 6 } adslAtucChanIntervalXIdleCells OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all idle ATM cells received on this channel this interval." ::= { adslAtucChanIntervalXEntry 4 } adslAtucChanIntervalXIdleCellBitErrors OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count the number of bit errors in the payload of the valid idle ATM cells received on this channel on this interval." ::= { adslAtucChanIntervalXEntry 5 } --****************************************************************** -- ADSL ATU-R Channel Interval Extension --****************************************************************** adslAturChanIntervalXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAturChanIntervalXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides extra information in relation to the adslAturChanIntervalTable for each ATU-R channel's performance collection interval. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125). Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. Interval number 1 is the only interval used currently." ::= { adslXObjects 13 } adslAturChanIntervalXEntry OBJECT-TYPE SYNTAX AdslAturChanIntervalXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAturChanIntervalXTable." INDEX { lineIndex, adslAturChanIntervalNumber } ::= { adslAturChanIntervalXTable 1 } AdslAturChanIntervalXEntry ::= SEQUENCE { adslAturChanIntervalXHecv PerfIntervalCount, adslAturChanIntervalXTotalCells PerfIntervalCount, adslAturChanIntervalXTotalUserCells PerfIntervalCount, adslAturChanIntervalXIdleCellBitErrors PerfIntervalCount } adslAturChanIntervalXHecv OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all header error correction violations received on this channel during this interval." ::= { adslAturChanIntervalXEntry 1 } adslAturChanIntervalXTotalCells OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all ATM cells received on this channel this interval." ::= { adslAturChanIntervalXEntry 2 } adslAturChanIntervalXTotalUserCells OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all valid non-idle ATM cells succesfully received on the UTOPIA bus on this interval." ::= { adslAturChanIntervalXEntry 3 } adslAturChanIntervalXIdleCellBitErrors OBJECT-TYPE SYNTAX PerfIntervalCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count the number of bit errors in the payload of the valid idle ATM cells received on this channel on this interval. Applies to ADSL2 only" ::= { adslAturChanIntervalXEntry 4 } --****************************************************************** -- ADSL ATU-C Proprietary Physical Extension Table --****************************************************************** adslAtucProprietaryPhysXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtucProprietaryPhysXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ADSL ATU-C Proprietary Physical Extension Table." ::= { adslXObjects 14 } adslAtucProprietaryPhysXEntry OBJECT-TYPE SYNTAX AdslAtucProprietaryPhysXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAtucProprietaryPhysXTable." INDEX { lineIndex } ::= { adslAtucProprietaryPhysXTable 1 } AdslAtucProprietaryPhysXEntry ::= SEQUENCE { adslAtucProprietaryPhysXLogS Integer32, adslAtucProprietaryPhysXCodingType INTEGER, adslAtucProprietaryPhysXCurrentFailures BITS, adslAtucProprietaryPhysXChangedFailures BITS, adslAtucProprietaryPhysXActualLineBitRate Unsigned32, adslAtucProprietaryPhysXPreviousLineBitRate Unsigned32, adslAtucProprietaryPhysXMSGc Unsigned32, adslAtucProprietaryPhysXMSGlp Unsigned32, adslAtucProprietaryRefPsd INTEGER, adslAtucProprietaryPhysXgiNEpart OCTET STRING, adslAtucProprietaryPhysXtssiNEpart OCTET STRING, adslAtucProprietaryPhysXLastRetrainCause OCTET STRING } adslAtucProprietaryPhysXLogS OBJECT-TYPE SYNTAX Integer32 (-255..255) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Base 2 logarithm for the number of DMT sysmbols per code word in the downstream direction." ::= { adslAtucProprietaryPhysXEntry 1 } adslAtucProprietaryPhysXCodingType OBJECT-TYPE SYNTAX INTEGER { noCoding (0), trellisCoding (1), reedSolomonCoding (2), trellisAndReedSolomonCoding (3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Coding used in downstream. The following representation is used: 0 - No coding 1 - Trellis coding 2 - ReedSolomon coding 3 - Concatenayed trellis coding and ReedSolomon coding." ::= { adslAtucProprietaryPhysXEntry 2 } adslAtucProprietaryPhysXCurrentFailures OBJECT-TYPE SYNTAX BITS { reserved0(0), reserved1(1), reserved2(2), reserved3(3), noDetectionUS(4), communicationProblemUS(5), bitRateTooHighUS(6), noCommonModeInHandshakeUS(7), reserved8(8), reserved9(9), ptmCodingViolationsPreemptiveB1US(10), ptmCodingViolationsB1US(11), ptmOutOfSyncB1US(12), ptmCodingViolationsPreemptiveB0US(13), ptmCodingViolationsB0US(14), ptmOutOfSyncB0US(15), noCellDelineationFastUS(16), noCellDelineationInterleavedUS(17), lossOfFrameUS(18), lossOfSignalUS(19), reserved20(20), reserved21(21), reserved22(22), reserved23(23), lossOfCellDelineationFastPathUS(24), lossOfCellDelineationInterleavedPathUS(25), reserved26(26), reserved27(27), reserved28(28), notRunningShowTimeStateUS(29), unavailableTimeCountedUS(30) } MAX-ACCESS read-only STATUS current DESCRIPTION "Bit mask giving the set of current active failures on the upstream (bit set => failure is ON). A failure is declared when the corresponding defect is active for more than 2.5 (+/-0.5) sec. A failure is cleared when the corresponding defect is off for at least 10.5 (+/-0.5) sec. The bit index and corresponding failure are: Bit[30] - Set when unavailable time is counted Bit[29] - Set when the modem is not in the Running Showtime state Bit[25] - Loss of cell delineation - interleaved path Bit[24] - Loss of cell delineation - fast path Bit[19] - Loss of signal Bit[18] - Loss of frame Bit[17] - No cell delineation - interleaved Bit[16] - No cell delineation - fast Bit[15] - PTM TC Out-Of-Sync Violation for bearer channel B0 Bit[14] - PTM TC Coding Violation for bearer channel B0, non-preemptive Bit[13] - PTM TC Coding Violation for bearer channel B0, preemptive Bit[12] - PTM TC Out-Of-Sync Violation for bearer channel B1 Bit[11] - PTM TC Coding Violation for bearer channel B1, non-preemptive Bit[10] - PTM TC Coding Violation for bearer channel B1, preemptive Bit[07] - No common mode in Handshake. Set when the test configuration prevents the training in the only mode supported by the ATU-R Bit[06] - Bit rate is too high. Set when the line quality does allow support for the minimum bit rate configured Bit[05] - Communication problem. Sethwne initialisation could not be completed due to time-out or a CRC error in one of the message received from the ATU-R Bit[04] - No detection. Set when the ATU-R has not been detected after 2.5 seconds of attempts to activate the line. Note: The RunningShowtime state is left as soon as unavailable time is counted (10 consecutive severely errored seconds), so bits 1 and 2 are always set together." ::= { adslAtucProprietaryPhysXEntry 3 } adslAtucProprietaryPhysXChangedFailures OBJECT-TYPE SYNTAX BITS { reserved0(0), reserved1(1), reserved2(2), reserved3(3), noDetectionUS(4), communicationProblemUS(5), bitRateTooHighUS(6), noCommonModeInHandshakeUS(7), reserved8(8), reserved9(9), ptmCodingViolationsPreemptiveB1US(10), ptmCodingViolationsB1US(11), ptmOutOfSyncB1US(12), ptmCodingViolationsPreemptiveB0US(13), ptmCodingViolationsB0US(14), ptmOutOfSyncB0US(15), noCellDelineationFastUS(16), noCellDelineationInterleavedUS(17), lossOfFrameUS(18), lossOfSignalUS(19), reserved20(20), reserved21(21), reserved22(22), reserved23(23), lossOfCellDelineationFastPathUS(24), lossOfCellDelineationInterleavedPathUS(25), reserved26(26), reserved27(27), reserved28(28), notRunningShowTimeStateUS(29), unavailableTimeCountedUS(30) } MAX-ACCESS read-only STATUS current DESCRIPTION "Bit mask presenting the upstream failures that have changed (or at least toggled) since last GetLineStatus invocation." ::= { adslAtucProprietaryPhysXEntry 4 } adslAtucProprietaryPhysXActualLineBitRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual line bit rate in the downstream direction." ::= { adslAtucProprietaryPhysXEntry 5 } adslAtucProprietaryPhysXPreviousLineBitRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous line bit rate in the downstream direction." ::= { adslAtucProprietaryPhysXEntry 6 } adslAtucProprietaryPhysXMSGc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Octets in message based portion of the overhead framing structure." ::= { adslAtucProprietaryPhysXEntry 7 } adslAtucProprietaryPhysXMSGlp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "ID of the latency path carrying the message based overhead." ::= { adslAtucProprietaryPhysXEntry 8 } adslAtucProprietaryRefPsd OBJECT-TYPE SYNTAX INTEGER (0..65535) UNITS "tenth dBm/Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "Upstream refPSD. RefPSD = nominal PSD - power cutback. Maps to the HMI GetLineStatus.linkStatus[US].refPsd." ::= { adslAtucProprietaryPhysXEntry 9 } adslAtucProprietaryPhysXgiNEpart OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The near-end (US) linear scale carrier gain allocation. Granularity: 1/512 relative to the reference gain. Range is [4095..0]. Maps to the HMI GetLineCarrierGains. Substituded by: vdsl2SCStatusGainAlloc Deprecated from: EDA 4.0" ::= { adslAtucProprietaryPhysXEntry 10 } adslAtucProprietaryPhysXtssiNEpart OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The US linear TSSI. Granularity: 1/32768 relative to the reference gain. Range is [32768..0]. Maps to the HMI GetLineLinearTssi" ::= { adslAtucProprietaryPhysXEntry 11 } adslAtucProprietaryPhysXLastRetrainCause OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-only STATUS current DESCRIPTION "Bit[3:0] Identifies the cause of the last initialization failure, according to the G.997.1 recommendation. Possible values are: 1 - Wrong profile (cannot occur in our system) 2 - Configuration not feasible 3 - Communication problem (CRC or time-out error) 4 - No ATU-R detected Bit[7:4] If the last initialization failure is a 'Communication problem', this field identifies the type of communication problem that has occurred. Possible values are: 0 - Timeout during initialization 1 - CRC error during initialization message 2 - Unavailable time declared during Showtime at the near-end 3 - Dynamic Rate Adaptation triggered retrain at the near-end 4 - Unavailable time declared during Showtime at the far-end 5 - Dynamic Rate Adaptation triggered retrain at the far-end 6 - Far-end line counters unavailable. If the last initialization failure is a 'Configuration not feasible' failure, this field indicates whether this applies to the upstream or downstream direction. Possible values are: 0 - Upstream configuration not feasible. 1 - Downstream configuration not feasible. Maps to the HMI GetLineStatus.lastRetrainCause" ::= { adslAtucProprietaryPhysXEntry 12 } --****************************************************************** -- ADSL ATU-R Proprietary Physical Extension Table --****************************************************************** adslAturProprietaryPhysXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAturProprietaryPhysXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ADSL ATU-R Proprietary Physical Extension Table." ::= { adslXObjects 15 } adslAturProprietaryPhysXEntry OBJECT-TYPE SYNTAX AdslAturProprietaryPhysXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAturProprietaryPhysXTable." INDEX { lineIndex } ::= { adslAturProprietaryPhysXTable 1 } AdslAturProprietaryPhysXEntry ::= SEQUENCE { adslAturProprietaryPhysXLogS Integer32, adslAturProprietaryPhysXCodingType INTEGER, adslAturProprietaryPhysXCurrentFailures BITS, adslAturProprietaryPhysXChangedFailures BITS, adslAturProprietaryPhysXActualLineBitRate Unsigned32, adslAturProprietaryPhysXPreviousLineBitRate Unsigned32, adslAturProprietaryPhysXMSGc Unsigned32, adslAturProprietaryPhysXMSGlp Unsigned32, adslAturProprietaryRefPsd INTEGER, adslAturProprietaryPhysXgiFELowpart0 OCTET STRING, adslAturProprietaryPhysXgiFEHipart0 OCTET STRING, adslAturProprietaryPhysXgiFELowpart1 OCTET STRING, adslAturProprietaryPhysXgiFEHipart1 OCTET STRING, adslAturProprietaryPhysXgiFELowpart2 OCTET STRING, adslAturProprietaryPhysXgiFEHipart2 OCTET STRING, adslAturProprietaryPhysXgiFELowpart3 OCTET STRING, adslAturProprietaryPhysXgiFEHipart3 OCTET STRING, adslAturProprietaryPhysXtssiFELowpart0 OCTET STRING, adslAturProprietaryPhysXtssiFEHipart0 OCTET STRING, adslAturProprietaryPhysXtssiFELowpart1 OCTET STRING, adslAturProprietaryPhysXtssiFEHipart1 OCTET STRING, adslAturProprietaryPhysXtssiFELowpart2 OCTET STRING, adslAturProprietaryPhysXtssiFEHipart2 OCTET STRING, adslAturProprietaryPhysXtssiFELowpart3 OCTET STRING, adslAturProprietaryPhysXtssiFEHipart3 OCTET STRING } adslAturProprietaryPhysXLogS OBJECT-TYPE SYNTAX Integer32 (-255..255) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Base 2 logarithm for the number of DMT symbols per code word in the upstream direction." ::= { adslAturProprietaryPhysXEntry 1 } adslAturProprietaryPhysXCodingType OBJECT-TYPE SYNTAX INTEGER { noCoding (0), trellisCoding (1), reedSolomonCoding (2), trellisAndReedSolomonCoding (3)} MAX-ACCESS read-only STATUS current DESCRIPTION "Coding used in upstream. The following representation is used: 0 - No coding 1 - Trellis coding 2 - ReedSolomon coding 3 - Concatenayed trellis coding and ReedSolomon coding." ::= { adslAturProprietaryPhysXEntry 2 } adslAturProprietaryPhysXCurrentFailures OBJECT-TYPE SYNTAX BITS { reserved0(0), reserved1(1), reserved2(2), reserved3(3), reserved4(4), reserved5(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), lossOfPowerDS(13), ptmOutOfSyncB0DS(14), ptmOutOfSyncB1DS(15), noCellDelineationFastDS(16), noCellDelineationInterleavedDS(17), lossOfFrameDS(18), lossOfSignalDS(19), reserved20(20), reserved21(21), reserved22(22), reserved23(23), lossOfCellDelineationFastPathDS(24), lossOfCellDelineationInterleavedPathDS(25), reserved26(26), reserved27(27), reserved28(28), notRunningShowTimeStateDS(29), unavailableTimeCountedDS(30) } MAX-ACCESS read-only STATUS current DESCRIPTION "Bit mask giving the set of current active failures on the downstream (bit set => failure is ON). A failure is declared when the corresponding defect is active for more than 2.5 (+/-0.5) sec. A failure is cleared when the corresponding defect is off for at least 10.5 (+/-0.5) sec. The bit index and corresponding failure are: Bit[30] - Set when unavailable time is counted Bit[29] - Set when the modem is not in the Running Showtime state Bit[25] - Loss of cell delineation - interleaved path Bit[24] - Loss of cell delineation - fast path Bit[19] - Loss of Signal Bit[18] - Loss of Frame Bit[17] - No cell delineation - interleaved Bit[16] - No cell delineation - fast Bit[15] - PTM remote TC Out-Of-Sync violation for bearer B0 Bit[14] - PTM remote TC Out-Of-Sync violation for bearer B1 Bit[13] - Loss of power. Note: the Running Showtime state is left as soon as unavailable time is counted (10 consecutive severely errored seconds), so bits 1 and 2 are always set together." ::= { adslAturProprietaryPhysXEntry 3 } adslAturProprietaryPhysXChangedFailures OBJECT-TYPE SYNTAX BITS { reserved0(0), reserved1(1), reserved2(2), reserved3(3), reserved4(4), reserved5(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), lossOfPowerDS(13), reserved14(14), reserved15(15), noCellDelineationInterleavedDS(16), noCellDelineationFastDS(17), lossOfFrameDS(18), lossOfSignalDS(19), reserved20(20), reserved21(21), reserved22(22), reserved23(23), lossOfCellDelineationInterleavedPathDS(24), lossOfCellDelineationFastPathDS(25), reserved26(26), reserved27(27), reserved28(28), notRunningShowTimeStateDS(29), unavailableTimeCountedDS(30) } MAX-ACCESS read-only STATUS current DESCRIPTION "Bit mask presenting the downstream failures that have changed (or at least toggled) since last GetLineStatus invocation." ::= { adslAturProprietaryPhysXEntry 4 } adslAturProprietaryPhysXActualLineBitRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Actual line bit rate in the upstream direction." ::= { adslAturProprietaryPhysXEntry 5 } adslAturProprietaryPhysXPreviousLineBitRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Previous line bit rate in the upstream direction." ::= { adslAturProprietaryPhysXEntry 6 } adslAturProprietaryPhysXMSGc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Octets in message based portion of the overhead framing structure." ::= { adslAturProprietaryPhysXEntry 7 } adslAturProprietaryPhysXMSGlp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "ID of the latency path carrying the message based overhead." ::= { adslAturProprietaryPhysXEntry 8 } adslAturProprietaryRefPsd OBJECT-TYPE SYNTAX INTEGER (0..65535) UNITS "tenth dBm/Hz" MAX-ACCESS read-only STATUS current DESCRIPTION "Downstream refPSD. RefPSD = nominal PSD - power cutback. Maps to the HMI GetLineStatus.linkStatus[DS].refPsd." ::= { adslAturProprietaryPhysXEntry 9 } adslAturProprietaryPhysXgiFELowpart0 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The far-end (DS) linear scale carrier gain allocation. Granularity: 1/512 relative to the reference gain. Range is [4095..0]. Maps to the HMI GetLineCarrierGains. Substituded by: vdsl2SCStatusGainAlloc Deprecated from: EDA 4.0" ::= { adslAturProprietaryPhysXEntry 10 } adslAturProprietaryPhysXgiFEHipart0 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The far-end (DS) linear scale carrier gain allocation. Granularity: 1/512 relative to the reference gain. Range is [4095..0]. Maps to the HMI GetLineCarrierGains. Substituded by: vdsl2SCStatusGainAlloc Deprecated from: EDA 4.0" ::= { adslAturProprietaryPhysXEntry 11 } adslAturProprietaryPhysXgiFELowpart1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The far-end (DS) linear scale carrier gain allocation. Granularity: 1/512 relative to the reference gain. Range is [4095..0]. Maps to the HMI GetLineCarrierGains. Substituded by: vdsl2SCStatusGainAlloc Deprecated from: EDA 4.0" ::= { adslAturProprietaryPhysXEntry 12 } adslAturProprietaryPhysXgiFEHipart1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The far-end (DS) linear scale carrier gain allocation. Granularity: 1/512 relative to the reference gain. Range is [4095..0]. Maps to the HMI GetLineCarrierGains. Substituded by: vdsl2SCStatusGainAlloc Deprecated from: EDA 4.0" ::= { adslAturProprietaryPhysXEntry 13 } adslAturProprietaryPhysXgiFELowpart2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The far-end (DS) linear scale carrier gain allocation. Granularity: 1/512 relative to the reference gain. Range is [4095..0]. Maps to the HMI GetLineCarrierGains. Substituded by: vdsl2SCStatusGainAlloc Deprecated from: EDA 4.0" ::= { adslAturProprietaryPhysXEntry 14 } adslAturProprietaryPhysXgiFEHipart2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The far-end (DS) linear scale carrier gain allocation. Granularity: 1/512 relative to the reference gain. Range is [4095..0]. Maps to the HMI GetLineCarrierGains. Substituded by: vdsl2SCStatusGainAlloc Deprecated from: EDA 4.0" ::= { adslAturProprietaryPhysXEntry 15 } adslAturProprietaryPhysXgiFELowpart3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The far-end (DS) linear scale carrier gain allocation. Granularity: 1/512 relative to the reference gain. Range is [4095..0]. Maps to the HMI GetLineCarrierGains. Substituded by: vdsl2SCStatusGainAlloc Deprecated from: EDA 4.0" ::= { adslAturProprietaryPhysXEntry 16 } adslAturProprietaryPhysXgiFEHipart3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The far-end (DS) linear scale carrier gain allocation. Granularity: 1/512 relative to the reference gain. Range is [4095..0]. Maps to the HMI GetLineCarrierGains. Substituded by: vdsl2SCStatusGainAlloc Deprecated from: EDA 4.0" ::= { adslAturProprietaryPhysXEntry 17 } adslAturProprietaryPhysXtssiFELowpart0 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The far-end (DS) linear scale carrier gain allocation. Granularity: 1/512 relative to the reference gain. Range is [4095..0]. Maps to the HMI GetLineCarrierGains." ::= { adslAturProprietaryPhysXEntry 18 } adslAturProprietaryPhysXtssiFEHipart0 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The far-end (DS) linear scale carrier gain allocation. Granularity: 1/512 relative to the reference gain. Range is [4095..0]. Maps to the HMI GetLineCarrierGains." ::= { adslAturProprietaryPhysXEntry 19 } adslAturProprietaryPhysXtssiFELowpart1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The far-end (DS) linear scale carrier gain allocation. Granularity: 1/512 relative to the reference gain. Range is [4095..0]. Maps to the HMI GetLineCarrierGains." ::= { adslAturProprietaryPhysXEntry 20 } adslAturProprietaryPhysXtssiFEHipart1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The far-end (DS) linear scale carrier gain allocation. Granularity: 1/512 relative to the reference gain. Range is [4095..0]. Maps to the HMI GetLineCarrierGains." ::= { adslAturProprietaryPhysXEntry 21 } adslAturProprietaryPhysXtssiFELowpart2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The far-end (DS) linear scale carrier gain allocation. Granularity: 1/512 relative to the reference gain. Range is [4095..0]. Maps to the HMI GetLineCarrierGains." ::= { adslAturProprietaryPhysXEntry 22 } adslAturProprietaryPhysXtssiFEHipart2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The far-end (DS) linear scale carrier gain allocation. Granularity: 1/512 relative to the reference gain. Range is [4095..0]. Maps to the HMI GetLineCarrierGains." ::= { adslAturProprietaryPhysXEntry 23 } adslAturProprietaryPhysXtssiFELowpart3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The far-end (DS) linear scale carrier gain allocation. Granularity: 1/512 relative to the reference gain. Range is [4095..0]. Maps to the HMI GetLineCarrierGains." ::= { adslAturProprietaryPhysXEntry 24 } adslAturProprietaryPhysXtssiFEHipart3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The far-end (DS) linear scale carrier gain allocation. Granularity: 1/512 relative to the reference gain. Range is [4095..0]. Maps to the HMI GetLineCarrierGains." ::= { adslAturProprietaryPhysXEntry 25 } --****************************************************************** -- ADSL ATU-C Proprietary Channel Extension Table --****************************************************************** adslAtucProprietaryChanXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtucProprietaryChanXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ADSL ATU-C Proprietary Channel Extension Table." ::= { adslXObjects 16 } adslAtucProprietaryChanXEntry OBJECT-TYPE SYNTAX AdslAtucProprietaryChanXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAtucProprietaryChanXEntry." INDEX { lineIndex } ::= { adslAtucProprietaryChanXTable 1 } AdslAtucProprietaryChanXEntry ::= SEQUENCE { adslAtucProprietaryChanXB Integer32, adslAtucProprietaryChanXN Integer32, adslAtucProprietaryChanXR Integer32, adslAtucProprietaryChanXD Integer32, adslAtucProprietaryChanXSnum Unsigned32, adslAtucProprietaryChanXSdenom Unsigned32, adslAtucProprietaryChanXL Unsigned32, adslAtucProprietaryChanXM Unsigned32, adslAtucProprietaryChanXT Unsigned32, adslAtucProprietaryChanXB0B Unsigned32, adslAtucProprietaryChanXB1B Unsigned32, adslAtucProprietaryChanActualInpB0 Unsigned32, adslAtucProprietaryChanActualInpB1 Unsigned32 } adslAtucProprietaryChanXB OBJECT-TYPE SYNTAX Integer32 (-65535..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of bearer channel bytes per data frame allocated to the downstream interleaved/fast buffer, summed over all bearer channels. Will be substituted by adslAtucProprietaryChanXB0B - and B1B" ::= { adslAtucProprietaryChanXEntry 1 } adslAtucProprietaryChanXN OBJECT-TYPE SYNTAX Integer32 (-65535..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes in an downstream FEC output data frame for the interleaved/fast buffer." ::= { adslAtucProprietaryChanXEntry 2 } adslAtucProprietaryChanXR OBJECT-TYPE SYNTAX Integer32 (-255..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of downstream FEC redundancy bytes per ReedSolomon codeword for the interleaved/fast buffer." ::= { adslAtucProprietaryChanXEntry 3 } adslAtucProprietaryChanXD OBJECT-TYPE SYNTAX Integer32 (-255..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Downstream interleaved/fast depth." ::= { adslAtucProprietaryChanXEntry 4 } adslAtucProprietaryChanXSnum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Numerator of the number of PMD symbols over which the FEC data frame spans. Note: This parameter is not supported by VDSL2 protocols." ::= { adslAtucProprietaryChanXEntry 5 } adslAtucProprietaryChanXSdenom OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Denominator of the number of PMD symbols over which the FEC data frame spans. Note: This parameter is not supported by VDSL2 protocols." ::= { adslAtucProprietaryChanXEntry 6 } adslAtucProprietaryChanXL OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bits per symbol." ::= { adslAtucProprietaryChanXEntry 7 } adslAtucProprietaryChanXM OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of MUX data frames per FEC data frame (codeword). Note: This parameter applies to ADSL2 or VDSL2 protocols only." ::= { adslAtucProprietaryChanXEntry 8 } adslAtucProprietaryChanXT OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "For ADSL2, T is the number of MUX data frames per sync octet. For VDSL2, T is the number of MUX data frames in an overhead subframe." ::= { adslAtucProprietaryChanXEntry 9 } adslAtucProprietaryChanXB0B OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "B[0] is the nominal number of bearer octets per MUX data frame from bearer B0. In the case of ADSL2, the actual number of bearer octets per MUX data frame is B[0] + 1 if the MUX frame count is not a multiple of T. In the case of VDSL2, the actual number of bearer octets per MUX data frame varies between B[0] and B[0] + 1 if G/T is not an integer. This param will substitute adslAtucProprietaryChanXB" ::= { adslAtucProprietaryChanXEntry 10 } adslAtucProprietaryChanXB1B OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "B[1] is the nominal number of bearer octets per MUX data frame from bearer B1. This field is only used for VDSL2, where the actual number of bearer octets per MUX data frame is always B[1], regardless of G/T. This param will substitute adslAtucProprietaryChanXB" ::= { adslAtucProprietaryChanXEntry 11 } adslAtucProprietaryChanActualInpB0 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The parameter gives the actual INP for the channel in DS direction. The actual INP is the calculated from the protocol dependant formulas: -VDSL2 protocol: INP = (4*R*D*I)/(N*L) -ADSL protocols: INP = (4*R*D)/L -No showtime: INP = 0" ::= { adslAtucProprietaryChanXEntry 15 } adslAtucProprietaryChanActualInpB1 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The parameter gives the actual INP for the channel in DS direction. The actual INP is the calculated from the protocol dependant formulas: -VDSL2 protocol: INP = (4*R*D*I)/(N*L) -ADSL protocols: INP = (4*R*D)/L -No showtime: INP = 0" ::= { adslAtucProprietaryChanXEntry 20 } --****************************************************************** -- ADSL ATU-R Proprietary Channel Extension Table --****************************************************************** adslAturProprietaryChanXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAturProprietaryChanXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ADSL ATU-R Proprietary Channel Extension Table." ::= { adslXObjects 17 } adslAturProprietaryChanXEntry OBJECT-TYPE SYNTAX AdslAturProprietaryChanXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAturProprietaryChanXTable." INDEX { lineIndex } ::= { adslAturProprietaryChanXTable 1 } AdslAturProprietaryChanXEntry ::= SEQUENCE { adslAturProprietaryChanXB Integer32, adslAturProprietaryChanXN Integer32, adslAturProprietaryChanXR Integer32, adslAturProprietaryChanXD Integer32, adslAturProprietaryChanXSnum Unsigned32, adslAturProprietaryChanXSdenom Unsigned32, adslAturProprietaryChanXL Unsigned32, adslAturProprietaryChanXM Unsigned32, adslAturProprietaryChanXT Unsigned32, adslAturProprietaryChanXB0B Unsigned32, adslAturProprietaryChanXB1B Unsigned32, adslAturProprietaryChanActualInpB0 Unsigned32, adslAturProprietaryChanActualInpB1 Unsigned32 } adslAturProprietaryChanXB OBJECT-TYPE SYNTAX Integer32 (-65535..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of bearer channel bytes per data frame allocated to the upstream interleaved/fast buffer, summed over all bearer channels. Will be substituted by adslAturProprietaryChanXB0B - and B1B" ::= { adslAturProprietaryChanXEntry 1 } adslAturProprietaryChanXN OBJECT-TYPE SYNTAX Integer32 (-65535..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes in an upstream FEC output data frame for the interleaved/fast buffer." ::= { adslAturProprietaryChanXEntry 2 } adslAturProprietaryChanXR OBJECT-TYPE SYNTAX Integer32 (-255..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of upstream FEC redundancy bytes per ReedSolomon code word for the interleaved/fast buffer." ::= { adslAturProprietaryChanXEntry 3 } adslAturProprietaryChanXD OBJECT-TYPE SYNTAX Integer32 (-255..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Upstream interleave/fast depth." ::= { adslAturProprietaryChanXEntry 4 } adslAturProprietaryChanXSnum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Numerator of the number of PMD symbols over which the FEC data frame spans. Note: This parameter is not supported by VDSL2 protocols." ::= { adslAturProprietaryChanXEntry 5 } adslAturProprietaryChanXSdenom OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Denominator of the number of PMD symbols over which the FEC data frame spans. Note: This parameter is not supported by VDSL2 protocols." ::= { adslAturProprietaryChanXEntry 6 } adslAturProprietaryChanXL OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bits per symbol." ::= { adslAturProprietaryChanXEntry 7 } adslAturProprietaryChanXM OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of MUX data frames per FEC data frame (codeword). Note: This parameter applies to ADSL2 or VDSL2 protocols only." ::= { adslAturProprietaryChanXEntry 8 } adslAturProprietaryChanXT OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "For ADSL2, T is the number of MUX data frames per sync octet. For VDSL2, T is the number of MUX data frames in an overhead subframe." ::= { adslAturProprietaryChanXEntry 9 } adslAturProprietaryChanXB0B OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "B[0] is the nominal number of bearer octets per MUX data frame from bearer B0. In the case of ADSL2, the actual number of bearer octets per MUX data frame is B[0] + 1 if the MUX frame count is not a multiple of T. In the case of VDSL2, the actual number of bearer octets per MUX data frame varies between B[0] and B[0] + 1 if G/T is not an integer. This param will substitute adslAturProprietaryChanXB" ::= { adslAturProprietaryChanXEntry 10 } adslAturProprietaryChanXB1B OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "B[1] is the nominal number of bearer octets per MUX data frame from bearer B1. This field is only used for VDSL2, where the actual number of bearer octets per MUX data frame is always B[1], regardless of G/T. This param will substitute adslAturProprietaryChanXB" ::= { adslAturProprietaryChanXEntry 11 } adslAturProprietaryChanActualInpB0 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The parameter gives the actual INP for the channel in US direction. The actual INP is the calculated from the protocol dependant formulas: -VDSL2 protocol: INP = (4*R*D*I)/(N*L) -ADSL protocols: INP = (4*R*D)/L -No showtime: INP = 0" ::= { adslAturProprietaryChanXEntry 15 } adslAturProprietaryChanActualInpB1 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The parameter gives the actual INP for the channel in US direction. The actual INP is the calculated from the protocol dependant formulas: -VDSL2 protocol: INP = (4*R*D*I)/(N*L) -ADSL protocols: INP = (4*R*D)/L -No showtime: INP = 0" ::= { adslAturProprietaryChanXEntry 20 } --****************************************************************** -- ADSL Proprietary Line Configuration Profile Extention Table --****************************************************************** adslProprietaryLineConfProfileXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslProprietaryLineConfProfileXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ADSL Proprietary Line Configuration Profile Extention Table." ::= { adslXObjects 18 } adslProprietaryLineConfProfileXEntry OBJECT-TYPE SYNTAX AdslProprietaryLineConfProfileXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslProprietaryLineConfProfileXTable." INDEX { lineIndex } ::= { adslProprietaryLineConfProfileXTable 1 } AdslProprietaryLineConfProfileXEntry ::= SEQUENCE { adslAtucProprietaryConfXMaxPower Integer32, adslAtucProprietaryConfXMaxPsd Integer32, adslAtucProprietaryConfXFixedPsd INTEGER, adslAtucProprietaryConfXPowerAdaptivity INTEGER, adslAtucProprietaryConfXOptionsFlagBit1 INTEGER, adslAtucProprietaryConfXOptionsFlagBit2 INTEGER, adslAtucProprietaryConfXDisableTrellis INTEGER, adslAtucProprietaryConfXRestartMode INTEGER, adslAtucProprietaryConfXMaxFramingMode INTEGER, adslAtucProprietaryConfXDisableBitSwap INTEGER, adslAturProprietaryConfXDisableBitSwap INTEGER, adslAtucProprietaryConfXDisableHighBitRateInGLite INTEGER, adslAtucProprietaryChanConfXOptimiseImpulseNoiseResilienceIlv INTEGER, adslAtucProprietaryChanConfXOptimiseImpulseNoiseResilienceFast INTEGER, adslAtucProprietaryChanConfXTxAtmFlagsFast Integer32, adslAtucProprietaryChanConfXRxAtmFlagsFast Integer32, adslAtucProprietaryChanConfXTxAtmFlagsIlv Integer32, adslAtucProprietaryChanConfXRxAtmFlagsIlv Integer32, adslAturProprietaryConfXMaxPower Integer32, adslAturProprietaryConfXMaxPsd Integer32, adslAturProprietaryChanConfXOptimiseImpulseNoiseResilienceIlv INTEGER, adslAturProprietaryChanConfXOptimiseImpulseNoiseResilienceFast INTEGER, adslAtucProprietaryConfXBoostFactor Integer32, adslAtucProprietaryConfXMaxRxPower Integer32, adslAtucProprietaryConfXDeltaPsdNormal Integer32, adslAtucProprietaryConfXDeltaPsdPlus Integer32, adslAtucProprietaryConfXDeltaPsdReach Integer32, adslAturProprietaryConfXDeltaPsdNormal Integer32, adslAturProprietaryConfXDeltaPsdPlus Integer32, adslAturProprietaryConfXDeltaPsdReach Integer32, adslAtucProprietaryConfXAutomodePIalpha INTEGER, adslAtucProprietaryConfXAutomodePIbeta INTEGER, adslAtucProprietaryConfXOptionsFlagBit4 INTEGER, adslAtucProprietaryConfXAdslPlusTxFilterId INTEGER, adslAtucProprietaryConfXDisableUS1bitConst INTEGER, adslAtucProprietaryConfXDisableWindowing INTEGER, adslAtucProprietaryConfXDisableShowtimeExit INTEGER, adslAtucProprietaryConfXDisableNitro INTEGER, adslAtucProprietaryConfXDisableUpdateTestParameters INTEGER, adslAtucProprietaryConfXTssiShapeNrOfBreakPoints INTEGER, adslAtucProprietaryConfXTssiShapeAdsl2ProtocolType OCTET STRING, adslAtucProprietaryConfXTssiShapeBreakPoint OCTET STRING, adslAtucProprietaryChanConfXINPminIlvB0 INTEGER, adslAtucProprietaryChanConfXINPminFastB0 INTEGER, adslAtucProprietaryChanConfXINPminFastB1 INTEGER, adslAturProprietaryChanConfXINPminIlvB0 INTEGER, adslAturProprietaryChanConfXINPminFastB0 INTEGER, adslAturProprietaryChanConfXINPminFastB1 INTEGER, adslAtucProprietaryConfXOptionsFlagBit5 INTEGER, adslAtucProprietaryConfXDisableShalfOptionBit0 INTEGER, adslAtucProprietaryConfXDisableShalfOptionBit1 INTEGER, adslAtucProprietaryConfXDisableLargeD INTEGER, adslAtucProprietaryConfXForceSegmentation INTEGER, adslAtucProprietaryConfXRelaxInpMinCheck INTEGER, adslAtucProprietaryConfXhsTxPSD0 INTEGER, adslAtucProprietaryConfXhsTxPSD1 INTEGER, adslAtucProprietaryConfXhsTxPSD2 INTEGER, adslAtucProprietaryChanMinL2BitRateB0 INTEGER, adslAtucProprietaryChanMinL2BitRateB1 INTEGER, adslAtucProprietaryChanL2LowRateSlotsB0 INTEGER, adslAtucProprietaryChanL2LowRateSlotsB1 INTEGER, adslAtucProprietaryChanL2PacketB0 INTEGER, adslAtucProprietaryChanL2PacketB1 INTEGER, adslAtucProprietaryChanMaxL2BitRateB0 INTEGER, adslAtucProprietaryChanMaxL2BitRateB1 INTEGER, adslAtucProprietaryL2TestConfigBit0 INTEGER, adslAtucProprietaryL2TestConfigBit1 INTEGER, adslAtucProprietaryL2TestConfigBit2 INTEGER, adslAtucProprietaryL2MinAtpr INTEGER, adslAtucProprietaryL0Time INTEGER, adslAtucProprietaryL2Time INTEGER, adslAtucProprietaryL2Atpr INTEGER, adslAtucProprietaryL2Atprt INTEGER, adslAtucProprietaryRateAdaptationFlagsBit0Upstream INTEGER, adslAtucProprietaryRateAdaptationFlagsBit0Downstream INTEGER, adslAtucValidRateExtension INTEGER, adslAtucProprietaryConfXMsgMinDS INTEGER, adslAtucProprietaryConfXMsgMinUS INTEGER, adslAturProprietaryConfXUsBitSwapBehavior INTEGER, adslAtucProprietaryConfXStrictPerCheck INTEGER, adslAtucProprietaryConfXTpsTcType INTEGER, adslAtucProprietaryConfXPsdOptimConfig INTEGER, adslAtucProprietaryConfXPsdMaskSelectUs Unsigned32, adslAtucProprietaryConfXDisableProtocolFallback TruthValue } adslAtucProprietaryConfXMaxPower OBJECT-TYPE SYNTAX Integer32 (-50..230) UNITS "0.1 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum allowed DS transmit power. Unit is 0.1 dBm." ::= { adslProprietaryLineConfProfileXEntry 1 } adslAtucProprietaryConfXMaxPsd OBJECT-TYPE SYNTAX Integer32 (-520..-360) UNITS "0.1 dB/Hz" MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Maximum allowed PSD expressed in dB: unit is 0.1 dB/Hz. The allowed range for the downstream direction is -36 to -52 dBm/Hz. Maps into HMI: MaxTxPsd." ::= { adslProprietaryLineConfProfileXEntry 2 } adslAtucProprietaryConfXFixedPsd OBJECT-TYPE SYNTAX INTEGER { set(1), notSet(0) } MAX-ACCESS read-write STATUS current DESCRIPTION "When the flag is set (1), the transmit PSD will be fixed to the minimum of -40dBm/Hz and adslAtucProprietaryConfXMaxPsd. When this flag is not set (0), the modem can break the ADSL initialisation sequence and re-initialise at a more optimal PSD level." ::= { adslProprietaryLineConfProfileXEntry 3 } adslAtucProprietaryConfXPowerAdaptivity OBJECT-TYPE SYNTAX INTEGER { set(1), notSet(0) } MAX-ACCESS read-write STATUS current DESCRIPTION "Flag only considered if adslAtucProprietaryConfXFixedPsd is notSet(0). If set, priority goes to power: the modem attempt to achieve the minimum power consumtion as soon as the minimum requested rate is achieved. If not set, priority goes to rate: the modem attempt to achieve the maximum requested bit rate before reducing the transmit power." ::= { adslProprietaryLineConfProfileXEntry 4 } adslAtucProprietaryConfXOptionsFlagBit1 OBJECT-TYPE SYNTAX INTEGER { dbm(0), fbm(1) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "DBM/FBM flag. Possible values are: 0 - Dual Bit Mode (DBM) 1 - FEXT Bitmap Mode (FBM)." ::= { adslProprietaryLineConfProfileXEntry 5 } adslAtucProprietaryConfXOptionsFlagBit2 OBJECT-TYPE SYNTAX INTEGER { enabledNTR(0), disabledNTR(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "NTR support flag. Annex A and Annex B only. Possible values are: 0 - NTR support enabled 1 - NTR support disabled." ::= { adslProprietaryLineConfProfileXEntry 6 } adslAtucProprietaryConfXDisableTrellis OBJECT-TYPE SYNTAX INTEGER { set (1), notSet (0) } MAX-ACCESS read-write STATUS current DESCRIPTION "Set this flag to disable trellis coding capability." ::= { adslProprietaryLineConfProfileXEntry 7 } adslAtucProprietaryConfXRestartMode OBJECT-TYPE SYNTAX INTEGER { default(0), restartOption1(1), restartOption2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Possible states are: 0 - Default behaviour. 1 - When the Running Showtime state is left due to the presence of ten consecutive SES, the modem goes to the Idle Configured state instead of going autonomously to the Running Activation state. 2 - Do not leave Running Showtime state in case of ten consecutive SES. When this option is active, the only way to leave the Running Showtime state is to send the Stop Line message." ::= { adslProprietaryLineConfProfileXEntry 8 } adslAtucProprietaryConfXMaxFramingMode OBJECT-TYPE SYNTAX INTEGER { default(0), reserved1(1), reserved2(2), framingModeOneAndTwoAndThree(3) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Possible states are: 0 - default behaviour: suports framing modes one, two and three. 1 - reserved. 2 - reserved. 3 - Maximum framing mode is three: modem will only support framing one, two and three. The parameter is no longer supported in the DSP. Deprecated from: EDA 4.0" ::= { adslProprietaryLineConfProfileXEntry 9 } adslAtucProprietaryConfXDisableBitSwap OBJECT-TYPE SYNTAX INTEGER { enableDownstreamBitswaps (0), disableDownstreamBitswaps (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0 - Enable downstream bitswaps 1 - Disable downstream bitswaps." ::= { adslProprietaryLineConfProfileXEntry 10 } adslAturProprietaryConfXDisableBitSwap OBJECT-TYPE SYNTAX INTEGER { enableUpstreamBitswaps (0), disableUpstreamBitswaps (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this Mib object is with respect to adslAturProprietaryConfXUsBitSwapBehavior. If the value of adslAturProprietaryConfXUsBitSwapBehavior is classicUpstreamBitswap then it will get/set the US bitswap i.e Bit 0 of disableBitSwap. If the value of adslAturProprietaryConfXUsBitSwapBehavior is fullBandUpstreamBitswap then it will get/set the Full Band US bitswap i.e Bit 2 of disableBitSwap. 0 - Enable upstream bitswaps 1 - Disable upstream bitswaps." ::= { adslProprietaryLineConfProfileXEntry 11 } adslAtucProprietaryConfXDisableHighBitRateInGLite OBJECT-TYPE SYNTAX INTEGER { enableUSandDS (0), limitUS (1), limitDS (2), limitUSandDS (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "0 - Enable high bit rates in G.Lite 1 - Limit the upstream bit rate to a maximum of 512 kbps in G.lite. 2 - Limit the downstream bit rate to a maximum of 1.536 Mbps in G.Lite. 3 - Limit upstream and downstream bit rate in G.lite By default, the rate is not limited in G.lite. Maps to the HMI SetlineTestConfiguration.disableHighBitRateInGlite" ::= { adslProprietaryLineConfProfileXEntry 12 } adslAtucProprietaryChanConfXOptimiseImpulseNoiseResilienceIlv OBJECT-TYPE SYNTAX INTEGER { impulseNoiseProtection (1), reachMaximumBitRate (0) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Flag: when set to 1 the modem initialisation algorithm gives priority to the impulse noise protection. When set to 0, the modem initialisation algorithm gives priority to reach the maximum bit rate. In this case, the algorithm could initialise with a lower delay than the one specified with the maxDelay parameter." ::= { adslProprietaryLineConfProfileXEntry 13 } adslAtucProprietaryChanConfXOptimiseImpulseNoiseResilienceFast OBJECT-TYPE SYNTAX INTEGER { impulseNoiseProtection (1), reachMaximumBitRate (0) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Flag: when set to 1 the modem initialisation algorithm gives priority to the impulse noise protection. When set to 0, the modem initialisation algorithm gives priority to reach the maximum bit rate. In this case, the algorithm could initialise with a lower delay than the one specified with the maxDelay parameter." ::= { adslProprietaryLineConfProfileXEntry 14 } adslAtucProprietaryChanConfXTxAtmFlagsFast OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the behaviour of the downstream ATM processor (value is don't care if the UTOPIA port is not used for bearer). Normally set to zero. This is a bit array controlling the following features Bit[0] - Disable ATM payload scrambling. Bit[1] - Reserved. Set to 0. Bit[2] - Reserved. Set to 0. Bit[3] - Disable HEC regeneration. HEC is passed through transparently instead of being recomputed. Allowed values: 0, 1, 8 and 9." ::= { adslProprietaryLineConfProfileXEntry 15 } adslAtucProprietaryChanConfXRxAtmFlagsFast OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the behaviour of the upstream ATM processor (value is don't care if the UTOPIA port is not used for bearer). Normally set to zero. This is a bit mask controlling the following features: Bit[0]- disable descrambler. No ATNM patload descrambling is applied. Bit[1]- Output cells during PRE_SYNC state. The ATM cells with correct HEC will be output the the PRE_SYNC state. Bit[2]- No cells discard on bad HEC. ATM cells with wrong HEC will be sent on the UTOPIA port. Bit[3]- No idle cells discard. Idle cells will be sent on UTOPIA port. Bit[4]- Disable cell delineation. Forces the delineation state to SYNC. Bit[5]- Disable unassigned cell filtering." ::= { adslProprietaryLineConfProfileXEntry 16 } adslAtucProprietaryChanConfXTxAtmFlagsIlv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the behaviour of the downstream ATM processor (value is don't care if the UTOPIA port is not used for bearer). Normally set to zero. This is a bit array controlling the following features Bit[0] - Disable ATM payload scrambling. Bit[1] - Reserved. Set to 0. Bit[2] - Reserved. Set to 0. Bit[3] - Disable HEC regeneration. HEC is passed through transparently instead of being recomputed. Allowed values: 0, 1, 8 and 9." ::= { adslProprietaryLineConfProfileXEntry 17 } adslAtucProprietaryChanConfXRxAtmFlagsIlv OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the behaviour of the upstream ATM processor (value is don't care if the UTOPIA port is not used for bearer). Normally set to zero. This is a bit mask controlling the following features: Bit[0]- disable descrambler. No ATNM patload descrambling is applied. Bit[1]- Output cells during PRE_SYNC state. The ATM cells with correct HEC will be output the the PRE_SYNC state. Bit[2]- No cells discard on bad HEC. ATM cells with wrong HEC will be sent on the UTOPIA port. Bit[3]- No idle cells discard. Idle cells will be sent on UTOPIA port. Bit[4]- Disable cell delineation. Forces the delineation state to SYNC. Bit[5]- Disable unassigned cell filtering." ::= { adslProprietaryLineConfProfileXEntry 18 } adslAturProprietaryConfXMaxPower OBJECT-TYPE SYNTAX Integer32 (-130..200) UNITS "0.1 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum allowed US transmit power. Unit is 0.1 dBm." ::= { adslProprietaryLineConfProfileXEntry 19 } adslAturProprietaryConfXMaxPsd OBJECT-TYPE SYNTAX Integer32 (-520..-360) UNITS "0.1 dB/Hz" MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Maximum allowed PSD expressed in dB: unit is 0.1 dB/Hz. This field is not supported in the upstream direction in the current release, and must be set to -380 (-38dBm). Maps into HMI: MaxTxPsd." ::= { adslProprietaryLineConfProfileXEntry 20 } adslAturProprietaryChanConfXOptimiseImpulseNoiseResilienceIlv OBJECT-TYPE SYNTAX INTEGER { impulseNoiseProtection (1), reachMaximumBitRate (0) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Flag: when set to 1 the modem initialisation algorithm gives priority to the impulse noise protection. When set to 0, the modem initialisation algorithm gives priority to reach the maximum bit rate. In this case, the algorithm could initialise with a lower delay than the one specified with the maxDelay parameter." ::= { adslProprietaryLineConfProfileXEntry 21 } adslAturProprietaryChanConfXOptimiseImpulseNoiseResilienceFast OBJECT-TYPE SYNTAX INTEGER { impulseNoiseProtection (1), reachMaximumBitRate (0) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Flag: when set to 1 the modem initialisation algorithm gives priority to the impulse noise protection. When set to 0, the modem initialisation algorithm gives priority to reach the maximum bit rate. In this case, the algorithm could initialise with a lower delay than the one specified with the maxDelay parameter." ::= { adslProprietaryLineConfProfileXEntry 22 } adslAtucProprietaryConfXBoostFactor OBJECT-TYPE SYNTAX Integer32 (192..223) MAX-ACCESS read-write STATUS current DESCRIPTION "Applies an additional upstream power boost. Bits[4:0] - A five bit value X, indicating the boost factor Bits[7:5] - Set to 0x06 to enable, otherwise the boost factor is ignored. The applied upstream mean gi in dB expressed by the boost factor X is: 10log10(1+X/64)" ::= { adslProprietaryLineConfProfileXEntry 23 } adslAtucProprietaryConfXMaxRxPower OBJECT-TYPE SYNTAX Integer32 (-255..255) UNITS "0.1 dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum receive power at the ATUC. Unit is 0.1 dBm. The ATUC will request an Upstream Power Cutback such that the power received at the CO modem is not higher than MaxRxPower." ::= { adslProprietaryLineConfProfileXEntry 24 } adslAtucProprietaryConfXDeltaPsdNormal OBJECT-TYPE SYNTAX Integer32 (-400..40) UNITS "0.1 dBm/Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "Delta PSD expressed in dBm: unit is 0.1 dBm/Hz. Defines a delta with respect to the protocols maximum nominal PSD value in the downstream direction. The allowed range is -40 to 4 dBm/Hz. Maps into HMI: protocolSpecificLinkConfig[DS].maxTxDeltaPsd[PSD_NORMAL]." ::= { adslProprietaryLineConfProfileXEntry 25 } adslAtucProprietaryConfXDeltaPsdPlus OBJECT-TYPE SYNTAX Integer32 (-400..40) UNITS "0.1 dBm/Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "Delta PSD expressed in dBm: unit is 0.1 dBm/Hz. Defines a delta with respect to the protocols maximum nominal PSD value in the downstream direction. The allowed range is -40 to 4 dBm/Hz. Maps into HMI: protocolSpecificLinkConfig[DS].maxTxDeltaPsd[PSD_PLUS]." ::= { adslProprietaryLineConfProfileXEntry 26 } adslAtucProprietaryConfXDeltaPsdReach OBJECT-TYPE SYNTAX Integer32 (-400..40) UNITS "0.1 dBm/Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "Delta PSD expressed in dBm: unit is 0.1 dBm/Hz. Defines a delta with respect to the protocols maximum nominal PSD value in the downstream direction. The allowed range is -40 to 4 dBm/Hz. Maps into HMI: protocolSpecificLinkConfig[DS].maxTxDeltaPsd[PSD_REACH]." ::= { adslProprietaryLineConfProfileXEntry 27 } adslAturProprietaryConfXDeltaPsdNormal OBJECT-TYPE SYNTAX Integer32 (-400..40) UNITS "0.1 dBm/Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "Delta PSD expressed in dBm: unit is 0.1 dBm/Hz. Defines a delta with respect to the protocols maximum nominal PSD value in the upstream direction. The allowed range is -40 to 4 dBm/Hz. Maps into HMI: protocolSpecificLinkConfig[US].maxTxDeltaPsd[PSD_NORMAL]." ::= { adslProprietaryLineConfProfileXEntry 28 } adslAturProprietaryConfXDeltaPsdPlus OBJECT-TYPE SYNTAX Integer32 (-400..40) UNITS "0.1 dBm/Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "Delta PSD expressed in dBm: unit is 0.1 dBm/Hz. Defines a delta with respect to the protocols maximum nominal PSD value in the upstream direction. The allowed range is -40 to 4 dBm/Hz. Maps into HMI: protocolSpecificLinkConfig[US].maxTxDeltaPsd[PSD_PLUS]." ::= { adslProprietaryLineConfProfileXEntry 29 } adslAturProprietaryConfXDeltaPsdReach OBJECT-TYPE SYNTAX Integer32 (-400..40) UNITS "0.1 dBm/Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "Delta PSD expressed in dBm: unit is 0.1 dBm/Hz. Defines a delta with respect to the protocols maximum nominal PSD value in the upstream direction. The allowed range is -40 to 4 dBm/Hz. Maps into HMI: protocolSpecificLinkConfig[US].maxTxDeltaPsd[PSD_REACH]." ::= { adslProprietaryLineConfProfileXEntry 30 } adslAtucProprietaryConfXAutomodePIalpha OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Automode performance index alpha. The allowed range is 1 to 255. Maps into HMI: PhysicalLayerConfig.automodePIalpha." ::= { adslProprietaryLineConfProfileXEntry 31 } adslAtucProprietaryConfXAutomodePIbeta OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Automode performance index beta. The allowed range is 1 to 255. Maps into HMI: PhysicalLayerConfig.automodePIbeta." ::= { adslProprietaryLineConfProfileXEntry 32 } adslAtucProprietaryConfXOptionsFlagBit4 OBJECT-TYPE SYNTAX INTEGER { disableDiagnosticMode (0), enableDiagnosticMode (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Diagnostic mode (ADSL2 only). Possible values are: 0 - Diagnostic mode disabled 1 - Diagnostic mode enabled. Maps into HMI: PhysicalLayerConfig.optionFlags Bit[4]." ::= { adslProprietaryLineConfProfileXEntry 33 } adslAtucProprietaryConfXAdslPlusTxFilterId OBJECT-TYPE SYNTAX INTEGER (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Additional Tx filter setting for G.992.5 (ADSL2+). The allowed range is 0 to 15. Maps into HMI: PhysicalLayerConfig.adslPlusTxFilterId." ::= { adslProprietaryLineConfProfileXEntry 34 } adslAtucProprietaryConfXDisableUS1bitConst OBJECT-TYPE SYNTAX INTEGER { enableUS1bitConst (0), disableUS1bitConst (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0 - Enable upstream 1 bit constellation 1 - Disable upstream 1 bit constellation. Maps into HMI: TestConfigMessage.disableUS1bitConst." ::= { adslProprietaryLineConfProfileXEntry 35 } adslAtucProprietaryConfXDisableWindowing OBJECT-TYPE SYNTAX INTEGER { enableWindowing (0), disableWindowing (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0 - Enable the transmit windowing 1 - Disable the transmit windowing. Maps into HMI: TestConfigMessage.disableWindowing." ::= { adslProprietaryLineConfProfileXEntry 36 } adslAtucProprietaryConfXDisableShowtimeExit OBJECT-TYPE SYNTAX INTEGER { enableShowtimeExit (0), disableShowtimeExit (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0 - Enable exit from showtime if CPE doesn't reply to GetCounter overhead message 1 - Disable exit from showtime if CPE doesn't reply to GetCounter overhead message. Maps into HMI: TestConfigMessage.disableShowtimeExit." ::= { adslProprietaryLineConfProfileXEntry 37 } adslAtucProprietaryConfXDisableNitro OBJECT-TYPE SYNTAX INTEGER { enableNitro (0), disableNitro (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0 - Enable BCM Nitro feature 1 - Disable BCM Nitro feature. Maps into HMI: TestConfigMessage.disableNitro." ::= { adslProprietaryLineConfProfileXEntry 38 } adslAtucProprietaryConfXDisableUpdateTestParameters OBJECT-TYPE SYNTAX INTEGER { enableUpdateTestParameters (0), disableUpdateTestParameters (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0 - Enable automatic test parameters update 1 - Disable automatic test parameters update. Maps into HMI: TestConfigMessage.disableUpdateTestParameters." ::= { adslProprietaryLineConfProfileXEntry 39 } adslAtucProprietaryConfXTssiShapeNrOfBreakPoints OBJECT-TYPE SYNTAX INTEGER (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration of custom TssiShape in showtime. Number of breakpoints (0 - disables custom TssiShape). Maps into HMI: PhysicalLayerConfig.customTssiShape. Must be configured while adsl_ifAdminStatus is down" ::= { adslProprietaryLineConfProfileXEntry 40 } adslAtucProprietaryConfXTssiShapeAdsl2ProtocolType OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration of custom TssiShape in showtime. ADSL2 protocol (0 - disables custom TssiShape). bit_0: G.992.3 Annex A/B/J bit_1: G.992.5 Annex A/B/M bit_2: G.992.3 Annex L Maps into HMI: PhysicalLayerConfig.customTssiShape. Must be configured while adsl_ifAdminStatus is down" ::= { adslProprietaryLineConfProfileXEntry 41 } adslAtucProprietaryConfXTssiShapeBreakPoint OBJECT-TYPE SYNTAX OCTET STRING (SIZE (32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration of custom TssiShape for showtime. Defines 16 break points which maps into HMI: PhysicalLayerConfig.customTssiShape[0-15]. The bitmap for each breakpoint: bit_0-6: log Tssi in 0.5 db, [0,-62] bit_7-15: ToneIndex, [0,511] Must be configured while adsl_ifAdminStatus is down" ::= { adslProprietaryLineConfProfileXEntry 42 } adslAtucProprietaryChanConfXINPminIlvB0 OBJECT-TYPE SYNTAX INTEGER { noINP (0), halfDmtSymbolINP(1), oneDmtSymbolINP(2), twoDmtSymbolINP(3), fourDmtSymbolINP(4), eightDmtSymbolINP(5), sixteenDmtSymbolINP(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Impulse Noise Protection in number of DMT symbols according to G.992.3. Possible values are: 0 -> No protection 1 -> 1/2 DMT symbol protection 2 -> 1 DMT symbol protection 3 -> 2 DMT symbol protection 4 -> 4 DMT symbol protection 5 -> 8 DMT symbol protection 6 -> 16 DMT symbol protection Note that the INP value must match the configured maximum delay to form a feasible profile" ::= { adslProprietaryLineConfProfileXEntry 43 } adslAtucProprietaryChanConfXINPminFastB0 OBJECT-TYPE SYNTAX INTEGER { noINP (0), halfDmtSymbolINP(1), oneDmtSymbolINP(2), twoDmtSymbolINP(3), fourDmtSymbolINP(4), eightDmtSymbolINP(5), sixteenDmtSymbolINP(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Impulse Noise Protection in number of DMT symbols according to G.992.3. Possible values are: 0 -> No protection 1 -> 1/2 DMT symbol protection 2 -> 1 DMT symbol protection 3 -> 2 DMT symbol protection 4 -> 4 DMT symbol protection 5 -> 8 DMT symbol protection 6 -> 16 DMT symbol protection Note that the INP value must match the configured maximum delay to form a feasible profile" ::= { adslProprietaryLineConfProfileXEntry 44 } adslAtucProprietaryChanConfXINPminFastB1 OBJECT-TYPE SYNTAX INTEGER { noINP (0), halfDmtSymbolINP(1), oneDmtSymbolINP(2), twoDmtSymbolINP(3), fourDmtSymbolINP(4), eightDmtSymbolINP(5), sixteenDmtSymbolINP(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Impulse Noise Protection in number of DMT symbols according to G.992.3. Possible values are: 0 -> No protection 1 -> 1/2 DMT symbol protection 2 -> 1 DMT symbol protection 3 -> 2 DMT symbol protection 4 -> 4 DMT symbol protection 5 -> 8 DMT symbol protection 6 -> 16 DMT symbol protection Note that the INP value must match the configured maximum delay to form a feasible profile" ::= { adslProprietaryLineConfProfileXEntry 45 } adslAturProprietaryChanConfXINPminIlvB0 OBJECT-TYPE SYNTAX INTEGER { noINP (0), halfDmtSymbolINP(1), oneDmtSymbolINP(2), twoDmtSymbolINP(3), fourDmtSymbolINP(4), eightDmtSymbolINP(5), sixteenDmtSymbolINP(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Impulse Noise Protection in number of DMT symbols according to G.992.3. Possible values are: 0 -> No protection 1 -> 1/2 DMT symbol protection 2 -> 1 DMT symbol protection 3 -> 2 DMT symbol protection 4 -> 4 DMT symbol protection 5 -> 8 DMT symbol protection 6 -> 16 DMT symbol protection Note that the INP value must match the configured maximum delay to form a feasible profile" ::= { adslProprietaryLineConfProfileXEntry 46 } adslAturProprietaryChanConfXINPminFastB0 OBJECT-TYPE SYNTAX INTEGER { noINP (0), halfDmtSymbolINP(1), oneDmtSymbolINP(2), twoDmtSymbolINP(3), fourDmtSymbolINP(4), eightDmtSymbolINP(5), sixteenDmtSymbolINP(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Impulse Noise Protection in number of DMT symbols according to G.992.3. Possible values are: 0 -> No protection 1 -> 1/2 DMT symbol protection 2 -> 1 DMT symbol protection 3 -> 2 DMT symbol protection 4 -> 4 DMT symbol protection 5 -> 8 DMT symbol protection 6 -> 16 DMT symbol protection Note that the INP value must match the configured maximum delay to form a feasible profile" ::= { adslProprietaryLineConfProfileXEntry 47 } adslAturProprietaryChanConfXINPminFastB1 OBJECT-TYPE SYNTAX INTEGER { noINP (0), halfDmtSymbolINP(1), oneDmtSymbolINP(2), twoDmtSymbolINP(3), fourDmtSymbolINP(4), eightDmtSymbolINP(5), sixteenDmtSymbolINP(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Impulse Noise Protection in number of DMT symbols according to G.992.3. Possible values are: 0 -> No protection 1 -> 1/2 DMT symbol protection 2 -> 1 DMT symbol protection 3 -> 2 DMT symbol protection 4 -> 4 DMT symbol protection 5 -> 8 DMT symbol protection 6 -> 16 DMT symbol protection Note that the INP value must match the configured maximum delay to form a feasible profile" ::= { adslProprietaryLineConfProfileXEntry 48 } adslAtucProprietaryConfXOptionsFlagBit5 OBJECT-TYPE SYNTAX INTEGER { disableExtraTxLPF (0), enableExtraTxLPF (1) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Custom PSD mask with extra Tx LPF. By enabling this feature an extra Tx LPF with a cutoff frequency at 950kHz and >27 dB attenuation above 1.5 MHz is inserted. Made deprecated. Use the adslEnableACIF instead. Valid from: EDA 1.3 Rxx Deprecated from: EDA 2.0 SP1 Possible values are: 0 - Extra TX LPF disabled 1 - Extra TX LPF enabled. Maps into HMI: PhysicalLayerConfig.optionFlags Bit[5]." ::= { adslProprietaryLineConfProfileXEntry 49 } adslAtucProprietaryConfXDisableShalfOptionBit0 OBJECT-TYPE SYNTAX INTEGER { enableShalfOption (0), disableShalfOption (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Possible values are: 0 - enable S = 1/2 in ADSL1 1 - disable S = 1/2 in ADSL1 Maps into HMI: TestConfigMessage.disableShalfOption Bit[0]. Note that use of this option bit is restricted in EDA due to the impact on selected latency mode." ::= { adslProprietaryLineConfProfileXEntry 50 } adslAtucProprietaryConfXDisableShalfOptionBit1 OBJECT-TYPE SYNTAX INTEGER { enableShalfOptionAllCpe (0), disableShalfOptionCertainCpe (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Possible values are: 0 - accept all CPE's 1 - ignore certain CPE reporting S = 1/2 support in R-MSG1. Maps into HMI: TestConfigMessage.disableShalfOption Bit[1]. Note that use of this option bit is restricted in EDA due to the impact on selected latency mode." ::= { adslProprietaryLineConfProfileXEntry 51 } adslAtucProprietaryConfXDisableLargeD OBJECT-TYPE SYNTAX INTEGER { normal (0), disableLargeD (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Disables possible selection of a DS interleaving depth (D) greater than 64. 0 - normal operation 1 - disable DS interleave depth > 64 Note: This parameter is used for ADSL protocols only." ::= { adslProprietaryLineConfProfileXEntry 52 } adslAtucProprietaryConfXForceSegmentation OBJECT-TYPE SYNTAX INTEGER { normal (0), forceSeg (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0 - normal operation 1 - force segmentation of overhead msgs > 10 bytes Maps into HMI: TestConfigMessage.forceSegmentation." ::= { adslProprietaryLineConfProfileXEntry 53 } adslAtucProprietaryConfXRelaxInpMinCheck OBJECT-TYPE SYNTAX INTEGER { strictly (0), acceptINP3 (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0 - strictly obay the config INP 1 - accept INPminDS=3 even if (config) INPmin > 3 Maps into HMI: TestConfigMessage.relaxInpMinCheck." ::= { adslProprietaryLineConfProfileXEntry 54 } adslAtucProprietaryConfXhsTxPSD0 OBJECT-TYPE SYNTAX INTEGER (-128..-32) UNITS "1 dBm/Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "-128 is a special value indicating that this carrier set shall not be transmitted. Maps into HMI: PhysicalLayerConfig.hsTxPSD[0]." ::= { adslProprietaryLineConfProfileXEntry 55 } adslAtucProprietaryConfXhsTxPSD1 OBJECT-TYPE SYNTAX INTEGER (-128..-32) UNITS "1 dBm/Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "-128 is a special value indicating that this carrier set shall not be transmitted. Maps into HMI: PhysicalLayerConfig.hsTxPSD[1]." ::= { adslProprietaryLineConfProfileXEntry 56 } adslAtucProprietaryConfXhsTxPSD2 OBJECT-TYPE SYNTAX INTEGER (-128..-32) UNITS "1 dBm/Hz" MAX-ACCESS read-write STATUS current DESCRIPTION "-128 is a special value indicating that this carrier set shall not be transmitted. Maps into HMI: PhysicalLayerConfig.hsTxPSD[2]." ::= { adslProprietaryLineConfProfileXEntry 57 } adslAtucProprietaryChanMinL2BitRateB0 OBJECT-TYPE SYNTAX INTEGER (0..128000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for L2 entry. If the mean rate is below MinL2BitRate for L2LowRateSlots the L2 mode is entered (CO side initiated L2 entry). Valid range is [0..minBitRateDS] Maps into HMI: SetLineTrafficConfig.minL2BitRate." ::= { adslProprietaryLineConfProfileXEntry 58 } adslAtucProprietaryChanMinL2BitRateB1 OBJECT-TYPE SYNTAX INTEGER (0..128000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold for L2 entry. If the mean rate is below MinL2BitRate for L2LowRateSlots the L2 mode is entered (CO side initiated L2 entry). Valid range is [0..minBitRateDS] Maps into HMI: SetLineTrafficConfig.minL2BitRate." ::= { adslProprietaryLineConfProfileXEntry 59 } adslAtucProprietaryChanL2LowRateSlotsB0 OBJECT-TYPE SYNTAX INTEGER (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The time interval for L2 entry. If the mean rate is below MinL2BitRate for L2LowRateSlots the L2 mode is entered (CO side initiated L2 entry). Valid range is [0..65535] Value 0 disables automatic power management. Maps into HMI: SetLineTrafficConfig.L2LowRateSlots." ::= { adslProprietaryLineConfProfileXEntry 60 } adslAtucProprietaryChanL2LowRateSlotsB1 OBJECT-TYPE SYNTAX INTEGER (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The time interval for L2 entry. If the mean rate is below MinL2BitRate for L2LowRateSlots the L2 mode is entered (CO side initiated L2 entry). Valid range is [0..65535] Value 0 disables automatic power management. Maps into HMI: SetLineTrafficConfig.L2LowRateSlots." ::= { adslProprietaryLineConfProfileXEntry 61 } adslAtucProprietaryChanL2PacketB0 OBJECT-TYPE SYNTAX INTEGER (0..28) UNITS "ATM cells" MAX-ACCESS read-write STATUS current DESCRIPTION "The UTOPIA output buffer threshold that triggers L0 entry (CO side initiated L0 entry). Valid range is [0..28] Maps into HMI: SetLineTrafficConfig.L2Packet." ::= { adslProprietaryLineConfProfileXEntry 62 } adslAtucProprietaryChanL2PacketB1 OBJECT-TYPE SYNTAX INTEGER (0..28) UNITS "ATM cells" MAX-ACCESS read-write STATUS current DESCRIPTION "The UTOPIA output buffer threshold that triggers L0 entry (CO side initiated L0 entry). Valid range is [0..28] Maps into HMI: SetLineTrafficConfig.L2Packet." ::= { adslProprietaryLineConfProfileXEntry 63 } adslAtucProprietaryChanMaxL2BitRateB0 OBJECT-TYPE SYNTAX INTEGER (0..32000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The threshold value for initiating L0 entry. (CPE side initiated L0 entry). Valid range is [minL2BitRate..maxBitRateDS] Maps into HMI: SetLineTrafficConfig.minL2BitRate." ::= { adslProprietaryLineConfProfileXEntry 64 } adslAtucProprietaryChanMaxL2BitRateB1 OBJECT-TYPE SYNTAX INTEGER (0..32000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value used for initiating L0 entry. (CPE side initiated L0 entry). Valid range is [minL2BitRate..maxBitRateDS] Maps into HMI: SetLineTrafficConfig.maxL2BitRate." ::= { adslProprietaryLineConfProfileXEntry 65 } adslAtucProprietaryL2TestConfigBit0 OBJECT-TYPE SYNTAX INTEGER { enableAutoL2Entry(0), disableAutoL2Entry(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "L2TestConfig bit mask: Bit[0]: Disable autonomous L2 entry/exit. Bit[1]: Disable autonomous L2 power trim. Bit[2]: Overrule L2 min/max rate calculation. Maps into HMI: SetLineTestConfig.L2TestConfig." ::= { adslProprietaryLineConfProfileXEntry 66 } adslAtucProprietaryL2TestConfigBit1 OBJECT-TYPE SYNTAX INTEGER { enableAutoL2PwrTrim(0), disableAutoL2PwrTrim(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "L2TestConfig bit mask: Bit[0]: Disable autonomous L2 entry/exit. Bit[1]: Disable autonomous L2 power trim. Bit[2]: Overrule L2 min/max rate calculation. Maps into HMI: SetLineTestConfig.L2TestConfig." ::= { adslProprietaryLineConfProfileXEntry 67 } adslAtucProprietaryL2TestConfigBit2 OBJECT-TYPE SYNTAX INTEGER { useL2RateCalc(0), overruleL2RateCalc(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "L2TestConfig bit mask: Bit[0]: Disable autonomous L2 entry/exit. Bit[1]: Disable autonomous L2 power trim. Bit[2]: Overrule L2 min/max rate calculation. Maps into HMI: SetLineTestConfig.L2TestConfig." ::= { adslProprietaryLineConfProfileXEntry 68 } adslAtucProprietaryL2MinAtpr OBJECT-TYPE SYNTAX INTEGER (0..15) UNITS "dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum power reduction at L2 entry. Valid range is [0..15] Maps into HMI: SetLineTrafficConfig.L2MinAtpr." ::= { adslProprietaryLineConfProfileXEntry 69 } adslAtucProprietaryL0Time OBJECT-TYPE SYNTAX INTEGER (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum time in L0 before L2 entry. Valid range is [0..65535] Maps into HMI: SetLinePhysicalConfig.L0Time." ::= { adslProprietaryLineConfProfileXEntry 70 } adslAtucProprietaryL2Time OBJECT-TYPE SYNTAX INTEGER (0..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum time in L2 before L0 entry. Valid range is [0..65535] Maps into HMI: SetLinePhysicalConfig.L2Time." ::= { adslProprietaryLineConfProfileXEntry 71 } adslAtucProprietaryL2Atpr OBJECT-TYPE SYNTAX INTEGER (0..31) UNITS "dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum aggregate transmit power reduction per L2 trim. Valid range is [0..31] Maps into HMI: SetLinePhysicalConfig.L2Atpr." ::= { adslProprietaryLineConfProfileXEntry 72 } adslAtucProprietaryL2Atprt OBJECT-TYPE SYNTAX INTEGER (0..31) UNITS "dB" MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum total aggregate transmit power reduction in L2 trim mode. Valid range is [0..31] Maps into HMI: SetLinePhysicalConfig.L2Atprt." ::= { adslProprietaryLineConfProfileXEntry 73 } adslAtucProprietaryRateAdaptationFlagsBit0Upstream OBJECT-TYPE SYNTAX INTEGER { disableSnrMinimum (0), enableSnrMinimum (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Possible values are: 0 - enable minimum SNR margin functionality 1 - disable minimum SNR margin functionality Maps into HMI: SetLinePhysicalConfig.linkconfig[US].rateAdaptationFlags." ::= { adslProprietaryLineConfProfileXEntry 74 } adslAtucProprietaryRateAdaptationFlagsBit0Downstream OBJECT-TYPE SYNTAX INTEGER { disableSnrMinimum (0), enableSnrMinimum (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Possible values are: 0 - enable minimum SNR margin functionality 1 - disable minimum SNR margin functionality Maps into HMI: SetLinePhysicalConfig.linkconfig[DS].rateAdaptationFlags." ::= { adslProprietaryLineConfProfileXEntry 75 } adslAtucValidRateExtension OBJECT-TYPE SYNTAX INTEGER (0..255) UNITS "kb/s" MAX-ACCESS read-write STATUS current DESCRIPTION "Some ADSL2(+) CPE's do not strictly comply to the rate constrains negotiated during G.hs. To avoid initialization failure with those CPE's the rate check can be relaxed by a configurable value, allowing to extend the allowed rate interval" ::= { adslProprietaryLineConfProfileXEntry 76 } adslAtucProprietaryConfXMsgMinDS OBJECT-TYPE SYNTAX INTEGER (4..28) UNITS "kb/s" MAX-ACCESS read-write STATUS current DESCRIPTION "This is minimum framing overhead for down stream.Allowed range is 4 to 28 inclusive of them." ::= { adslProprietaryLineConfProfileXEntry 77 } adslAtucProprietaryConfXMsgMinUS OBJECT-TYPE SYNTAX INTEGER (4..28) UNITS "kb/s" MAX-ACCESS read-write STATUS current DESCRIPTION "This is minimum framing overhead for up stream.Allowed range is 4 to 28 inclusive of them." ::={ adslProprietaryLineConfProfileXEntry 78 } adslAturProprietaryConfXUsBitSwapBehavior OBJECT-TYPE SYNTAX INTEGER {classicUsBitswaps (0), fullBandUsBitswaps (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The adslAturProprietaryConfXUsBitSwapBehavior has effect only if the upstream bitswap is enabled in adslAturProprietaryConfXDisableBitSwap. The adslAturProprietaryConfXUsBitSwapBehavior controls the behaviour of the upstream bitswap: 0 - Classic upstream bitswaps 1 - FullBand upstream bitswaps." ::= { adslProprietaryLineConfProfileXEntry 79 } adslAtucProprietaryConfXStrictPerCheck OBJECT-TYPE SYNTAX INTEGER {disableStrictPerCheck (0), enableStrictPerCheck (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled, limit SRA such as to respect the 15 to 20ms PER constraint. Default disabled." ::= { adslProprietaryLineConfProfileXEntry 80 } adslAtucProprietaryConfXTpsTcType OBJECT-TYPE SYNTAX INTEGER {atm (2), ptm (4), both (6)} MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Configure allowed traffic type: ATM, PTM or both. Valid from: EDA 2.2 MA2 Obsoleted from: EDA 4.0 Replaced by vdslVtucProprietaryConfXTpsTcType in PEA-VDSL-IPDSLAM" ::= { adslProprietaryLineConfProfileXEntry 85 } adslAtucProprietaryConfXPsdOptimConfig OBJECT-TYPE SYNTAX INTEGER {noOptimisation (0), optimizeForPsdMaskFilling (1), optimizeShapeForPerformance (2)} MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter controls the selected PSD optimization modes: 0: No optimization. A fixed TSSI shape (either the default of the configured shape) is used. 1: PSD optimization. The TSSI shape that optimally fills the configured PSD mask is computed dynamically. 2: PSD shaping. The TSSI shape the provides optimal downstream performance within the PSD mask constraints is computed dynamically. Note: Applies to ADSL-only applications." ::= { adslProprietaryLineConfProfileXEntry 90 } adslAtucProprietaryConfXPsdMaskSelectUs OBJECT-TYPE SYNTAX Unsigned32(1..9) MAX-ACCESS read-write STATUS current DESCRIPTION "The selected upstream PSD mask. This parameter is used only for annexes J and M of G.992.3 and G.992.5, and the same selection is used for all relevant enabled bits in xdsl2LConfProfAtuTransSysEna. Value Annex J Annex M 1 ADLU-32 EU-32 2 ADLU-36 EU-36 3 ADLU-40 EU-40 4 ADLU-44 EU-44 5 ADLU-48 EU-48 6 ADLU-52 EU-52 7 ADLU-56 EU-56 8 ADLU-60 EU-60 9 ADLU-64 EU-64 Applies only to lines running G.992.3 or G.992.5 This parameter is copied from draft-ietf-adslmib-vdsl2-01.txt, to secure a smooth migration to the VDSL2-LINE MIB when this MIB is approved." REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.11" DEFVAL { 1 } ::= { adslProprietaryLineConfProfileXEntry 95 } adslAtucProprietaryConfXDisableProtocolFallback OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter controls the protocol fallback mechanism. If set it disables protocol fallback mechanism. Note: Applies to ADSL-only applications." ::= { adslProprietaryLineConfProfileXEntry 100 } --****************************************************************** -- ADSL Proprietary Line Table --****************************************************************** adslLineXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslLineXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is a proprietary extension of RFC2662. It contains ADSL line configuration and monitoring information. This includes the ATU-(R/C) capabilities and actual ADSL transmission system." ::= { adslXObjects 19 } adslLineXEntry OBJECT-TYPE SYNTAX AdslLineXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry extends the adslLineEntry defined in [RFC2662]. Each entry corresponds to an ADSL line." INDEX { lineIndex } ::= { adslLineXTable 1 } AdslLineXEntry ::= SEQUENCE { adslLineXTransAtucCap BITS, adslLineXTransAtucConfig BITS, adslLineXTransAtucActual BITS, adslLineXTransAturCap BITS } adslLineXTransAtucCap OBJECT-TYPE SYNTAX BITS { etsiTS101388(0), ansiT1413AdslOverPots(1), proprietarySadslOverPots(2), reserved3(3), g9925AnnexMAdsl2PlusOver(4), g9925AnnexIAdsl2PlusOver(5), g9925AnnexBAdsl2PlusOverIsdn(6), g9925AnnexAAdsl2PlusOverPots(7), g9923AnnexLAdsl2RENarrowPsdOverPots(8), g9923AnnexLAdsl2REOverPots(9), g9924AnnexIAdsl2LiteAdmWithPots(10), g9924AnnexAAdsl2LiteOverPots(11), g9923AnnexMAdsl2AdmWithIsdn(12), g9923AnnexIAdsl2AdmWithPots(13), g9923AnnexBAdsl2OverIsdn(14), g9923AnnexAAdsl2OverPots(15), reserved16(16), reserved17(17), reserved18(18), etsiMcmVDSL(19), reserved20(20), t1McmVDSL(21), g99212AnnexBShdslOverTcmIsdnEu(22), g99212AnnexAShdslOverTcmIsdnUs(23), g9923VDSL2(24), g9921AnnexISsdslOverTcmIsdn(25), g9921AnnexHSsdslOverTcmIsdn(26), g9922AnnexCAdslLiteOverTcmIsdn(27), g9922AnnexAAdslLiteOverPots(28), g9921AnnexCAdslOverTcmIsdn(29), g9921AnnexBAdslOverIsdn(30), g9921AnnexAAdslOverPots(31) } MAX-ACCESS read-only STATUS current DESCRIPTION "The transmission modes, represented by a bitmask that the ATU-C is capable of supporting. The modes available are limited by the design of the equipment." REFERENCE "HMI Definition MCS6430F" ::= { adslLineXEntry 1 } adslLineXTransAtucConfig OBJECT-TYPE SYNTAX BITS { etsiTS101388(0), ansiT1413AdslOverPots(1), proprietarySadslOverPots(2), reserved3(3), g9925AnnexMAdsl2PlusOver(4), g9925AnnexIAdsl2PlusOver(5), g9925AnnexBAdsl2PlusOverIsdn(6), g9925AnnexAAdsl2PlusOverPots(7), g9923AnnexLAdsl2RENarrowPsdOverPots(8), g9923AnnexLAdsl2REOverPots(9), g9924AnnexIAdsl2LiteAdmWithPots(10), g9924AnnexAAdsl2LiteOverPots(11), g9923AnnexMAdsl2AdmWithIsdn(12), g9923AnnexIAdsl2AdmWithPots(13), g9923AnnexBAdsl2OverIsdn(14), g9923AnnexAAdsl2OverPots(15), reserved16(16), reserved17(17), reserved18(18), etsiMcmVDSL(19), reserved20(20), t1McmVDSL(21), g99212AnnexBShdslOverTcmIsdnEu(22), g99212AnnexAShdslOverTcmIsdnUs(23), g9923VDSL2(24), g9921AnnexISsdslOverTcmIsdn(25), g9921AnnexHSsdslOverTcmIsdn(26), g9922AnnexCAdslLiteOverTcmIsdn(27), g9922AnnexAAdslLiteOverPots(28), g9921AnnexCAdslOverTcmIsdn(29), g9921AnnexBAdslOverIsdn(30), g9921AnnexAAdslOverPots(31) } MAX-ACCESS read-write STATUS current DESCRIPTION "The transmission modes, represented by a bitmask, currently enabled by the ATU-C. The manager can only set those modes that are supported by the ATU-C. An ATU-C's supported modes are provided by adslLineXTransAtucCap. Setting a bit in the mask enables the protocol in question." REFERENCE "HMI Definition MCS6430F" ::= { adslLineXEntry 2 } adslLineXTransAtucActual OBJECT-TYPE SYNTAX BITS { etsiTS101388(0), ansiT1413AdslOverPots(1), proprietarySadslOverPots(2), reserved3(3), g9925AnnexMAdsl2PlusOver(4), g9925AnnexIAdsl2PlusOver(5), g9925AnnexBAdsl2PlusOverIsdn(6), g9925AnnexAAdsl2PlusOverPots(7), g9923AnnexLAdsl2RENarrowPsdOverPots(8), g9923AnnexLAdsl2REOverPots(9), g9924AnnexIAdsl2LiteAdmWithPots(10), g9924AnnexAAdsl2LiteOverPots(11), g9923AnnexMAdsl2AdmWithIsdn(12), g9923AnnexIAdsl2AdmWithPots(13), g9923AnnexBAdsl2OverIsdn(14), g9923AnnexAAdsl2OverPots(15), reserved16(16), reserved17(17), reserved18(18), etsiMcmVDSL(19), reserved20(20), t1McmVDSL(21), g99212AnnexBShdslOverTcmIsdnEu(22), g99212AnnexAShdslOverTcmIsdnUs(23), g9923VDSL2(24), g9921AnnexISsdslOverTcmIsdn(25), g9921AnnexHSsdslOverTcmIsdn(26), g9922AnnexCAdslLiteOverTcmIsdn(27), g9922AnnexAAdslLiteOverPots(28), g9921AnnexCAdslOverTcmIsdn(29), g9921AnnexBAdslOverIsdn(30), g9921AnnexAAdslOverPots(31) } MAX-ACCESS read-only STATUS current DESCRIPTION "The actual transmission mode of the ATU-C. During ADSL line initialization, the ADSL Transceiver Unit - Remote terminal end (ATU-R) will determine the mode used for the link. This value will be limited a single transmission mode that is a subset of those modes enabled by the ATU-C and denoted by adslLineXTransAtucConfig. After an initialization has occurred, its mode is saved as the 'Current' mode and is persistence should the link go down." REFERENCE "HMI Definition MCS6430F" ::= { adslLineXEntry 3 } adslLineXTransAturCap OBJECT-TYPE SYNTAX BITS { etsiTS101388(0), ansiT1413AdslOverPots(1), proprietarySadslOverPots(2), reserved3(3), g9925AnnexMAdsl2PlusOver(4), g9925AnnexIAdsl2PlusOver(5), g9925AnnexBAdsl2PlusOverIsdn(6), g9925AnnexAAdsl2PlusOverPots(7), g9923AnnexLAdsl2RENarrowPsdOverPots(8), g9923AnnexLAdsl2REOverPots(9), g9924AnnexIAdsl2LiteAdmWithPots(10), g9924AnnexAAdsl2LiteOverPots(11), g9923AnnexMAdsl2AdmWithIsdn(12), g9923AnnexIAdsl2AdmWithPots(13), g9923AnnexBAdsl2OverIsdn(14), g9923AnnexAAdsl2OverPots(15), reserved16(16), reserved17(17), reserved18(18), etsiMcmVDSL(19), reserved20(20), t1McmVDSL(21), g99212AnnexBShdslOverTcmIsdnEu(22), g99212AnnexAShdslOverTcmIsdnUs(23), g9923VDSL2(24), g9921AnnexISsdslOverTcmIsdn(25), g9921AnnexHSsdslOverTcmIsdn(26), g9922AnnexCAdslLiteOverTcmIsdn(27), g9922AnnexAAdslLiteOverPots(28), g9921AnnexCAdslOverTcmIsdn(29), g9921AnnexBAdslOverIsdn(30), g9921AnnexAAdslOverPots(31) } MAX-ACCESS read-only STATUS current DESCRIPTION "The transmission modes, represented by a bitmask that the ATU-R is capable of supporting. The modes available are limited by the design of the equipment." REFERENCE "HMI Definition MCS6430F" ::= { adslLineXEntry 4 } --****************************************************************** -- ADSL Proprietary Performance Data Extension Table --****************************************************************** adslProprietaryPerfDataXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslProprietaryPerfDataXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ADSL Proprietary Performance Data Extension Table." ::= { adslXObjects 20 } adslProprietaryPerfDataXEntry OBJECT-TYPE SYNTAX AdslProprietaryPerfDataXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslProprietaryPerfDataXTable." INDEX { lineIndex } ::= { adslProprietaryPerfDataXTable 1 } AdslProprietaryPerfDataXEntry ::= SEQUENCE { adslProprietaryPerfDataXReset INTEGER, adslProprietaryPerfDataXSinceResetTimeElapsed Unsigned32, adslProprietaryPerfDataXFailedInits Counter32 } adslProprietaryPerfDataXReset OBJECT-TYPE SYNTAX INTEGER {reset(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "When set to 'reset' the ADSL line performance total counters are reset to 0." ::= { adslProprietaryPerfDataXEntry 1 } adslProprietaryPerfDataXSinceResetTimeElapsed OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Elapsed time in seconds since the last reset of the ADSL line performance total counters." ::= { adslProprietaryPerfDataXEntry 2 } adslProprietaryPerfDataXFailedInits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of failed line initialization attempts since agent reset." ::= { adslProprietaryPerfDataXEntry 3 } --****************************************************************** -- ADSL ATU-C Line Quality Threshold --****************************************************************** adslAtucLineQualityThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtucLineQualityThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the downstream line quality alarm thresholds. Thresholds can be configured on a per channel basis" ::= { adslXObjects 21 } adslAtucLineQualityThresholdEntry OBJECT-TYPE SYNTAX AdslAtucLineQualityThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslAtucLineQualityThresholdTable" INDEX { lineIndex } ::= { adslAtucLineQualityThresholdTable 1 } AdslAtucLineQualityThresholdEntry ::= SEQUENCE { adslAtucLineQualityThresChan0 Unsigned32, adslAtucLineQualityThresChan1 Unsigned32 } adslAtucLineQualityThresChan0 OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "Line quality alarm threshold for channel 0" ::= { adslAtucLineQualityThresholdEntry 1 } adslAtucLineQualityThresChan1 OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "Line quality alarm threshold for channel 1" ::= { adslAtucLineQualityThresholdEntry 2 } --****************************************************************** -- ADSL ATU-R Line Quality Threshold --****************************************************************** adslAturLineQualityThresholdTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAturLineQualityThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the upstream line quality alarm thresholds. Thresholds can be configured on a per channel basis" ::= { adslXObjects 22 } adslAturLineQualityThresholdEntry OBJECT-TYPE SYNTAX AdslAturLineQualityThresholdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslAturLineQualityThresholdTable" INDEX { lineIndex } ::= { adslAturLineQualityThresholdTable 1 } AdslAturLineQualityThresholdEntry ::= SEQUENCE { adslAturLineQualityThresChan0 Unsigned32, adslAturLineQualityThresChan1 Unsigned32 } adslAturLineQualityThresChan0 OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "Line quality alarm threshold for channel 0" ::= { adslAturLineQualityThresholdEntry 1 } adslAturLineQualityThresChan1 OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "Line quality alarm threshold for channel 1" ::= { adslAturLineQualityThresholdEntry 2 } --****************************************************************** -- ADSL Line Bonding Configuration --****************************************************************** adslLineBondingConfTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslLineBondingConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the Line Bonding configuration." ::= { adslXObjects 23 } adslLineBondingConfEntry OBJECT-TYPE SYNTAX AdslLineBondingConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslLineBondingConfTable" INDEX { lineIndex } ::= { adslLineBondingConfTable 1 } AdslLineBondingConfEntry ::= SEQUENCE { adslLineBondGroupAdminStatus INTEGER, adslLineBondGroupMembers BITS, adslLineBondDsGroupRateMax Unsigned32, adslLineBondDsGroupRateMin Unsigned32, adslLineBondUsGroupRateMax Unsigned32, adslLineBondUsGroupRateMin Unsigned32, adslAtucLineBondLineQualityThres Unsigned32, adslAturLineBondLineQualityThres Unsigned32, adslAturLineBondLineNoWaitAllBondingLines TruthValue } adslLineBondGroupAdminStatus OBJECT-TYPE SYNTAX INTEGER {up(1),down(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The desired state of the bonding group." ::= { adslLineBondingConfEntry 1 } adslLineBondGroupMembers OBJECT-TYPE SYNTAX BITS { line16Ch1(0), line16Ch0(1), line15Ch1(2), line15Ch0(3), line14Ch1(4), line14Ch0(5), line13Ch1(6), line13Ch0(7), line12Ch1(8), line12Ch0(9), line11Ch1(10), line11Ch0(11), line10Ch1(12), line10Ch0(13), line9Ch1(14), line9Ch0(15), line8Ch1(16), line8Ch0(17), line7Ch1(18), line7Ch0(19), line6Ch1(20), line6Ch0(21), line5Ch1(22), line5Ch0(23), line4Ch1(24), line4Ch0(25), line3Ch1(26), line3Ch0(27), line2Ch1(28), line2Ch0(29), line1Ch1(30), line1Ch0(31) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates which lines should be bonded in in this bonding group. Include main line and ordinary member lines. Note that the Channel 1 is not yet supported in IP DSLAM." ::= { adslLineBondingConfEntry 2 } adslLineBondDsGroupRateMin OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "The configured minimum DS group rate." ::= { adslLineBondingConfEntry 3 } adslLineBondDsGroupRateMax OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "The configured maximum DS group rate." ::= { adslLineBondingConfEntry 4 } adslLineBondUsGroupRateMin OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "The configured minimum US group rate." ::= { adslLineBondingConfEntry 5 } adslLineBondUsGroupRateMax OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "The configured maximum US group rate." ::= { adslLineBondingConfEntry 6 } adslAtucLineBondLineQualityThres OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "Line quality alarm threshold for the bonding group." ::= { adslLineBondingConfEntry 7 } adslAturLineBondLineQualityThres OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "Line quality alarm threshold for the bonding group." ::= { adslLineBondingConfEntry 8 } adslAturLineBondLineNoWaitAllBondingLines OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter controls bonding mode behaviour. If set, this allows the bonding group to be active as soon as at least one line is in Showtime. Note: This is a non-standardbehavior.." ::= { adslLineBondingConfEntry 10 } --****************************************************************** -- ADSL Line Bonding Status --****************************************************************** adslLineBondingStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslLineBondingStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the stautus information of this bonding group." ::= { adslXObjects 24 } adslLineBondingStatusEntry OBJECT-TYPE SYNTAX AdslLineBondingStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslLineBondingStatusTable." INDEX { lineIndex } ::= { adslLineBondingStatusTable 1 } AdslLineBondingStatusEntry ::= SEQUENCE { adslLineBondGroupOperStatus INTEGER, adslLineBondGroupActualRateDs Unsigned32, adslLineBondGroupActualRateUs Unsigned32 } adslLineBondGroupOperStatus OBJECT-TYPE SYNTAX INTEGER {up(1),down(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The operational state of the bonding group. When operational state is down, no data traffic can be passed." ::= { adslLineBondingStatusEntry 1 } adslLineBondGroupActualRateDs OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "The actual DS rate for the bonding group." ::= { adslLineBondingStatusEntry 2 } adslLineBondGroupActualRateUs OBJECT-TYPE SYNTAX Unsigned32 UNITS "bps" MAX-ACCESS read-write STATUS current DESCRIPTION "The actual US rate for the bonding group." ::= { adslLineBondingStatusEntry 3 } --****************************************************************** -- No tables reserved for future use: -- adslXObjects [?] --****************************************************************** --****************************************************************** -- --****************************************************************** adslTxFilterConfig OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "TxFilter in ADSL chipset. The txFilterConfig[1..3] parameter for the C0 and B0 version of the chipset. Bytes [0..2] for CO version and bytes [3..5] for B0 version. NOTE: This parameter must be set from the configuration file to take effect!" REFERENCE "HMI definition of SetDeviceConfiguration" ::= { adslXObjects 25 } --****************************************************************** -- --****************************************************************** adslTxFilterActual OBJECT-TYPE SYNTAX OCTET STRING (SIZE (3)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "TxFilter in ADSL chipset. The value of the txFilterConfig[1..3] acually used in the ADSL chipset." REFERENCE "HMI definition of SetDeviceConfiguration" ::= { adslXObjects 26 } --****************************************************************** -- --****************************************************************** adslPowerModes OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Power Modes in DSL chipset. The PowerModeData[] in the IP DSLAM uses these indexes: POWERDOWN = 0 ACTIVATION = 1 SHOWTIME_256 = 2 LINETEST = 3 SHOWTIME_512 = 4 SHOWTIME_1024 = 5 SHOWTIME_2048 = 6 SHOWTIME_4096 = 7 NOTE: This parameter must be set from the configuration file to take effect!" REFERENCE "HMI definition of SetLineDriverPowerModes" ::= { adslXObjects 27 } --****************************************************************** -- --****************************************************************** adslTxPowerCalibration OBJECT-TYPE SYNTAX Integer32 (-511..767) MAX-ACCESS read-write STATUS current DESCRIPTION "Tuning the transmit power in ADSL chipset. Unit is 1/256 dB. Range ]-2,+3[ dB which corresponds to ]-512,+768[. NOTE: This parameter must be set from the configuration file to take effect!" REFERENCE "HMI definition of SetDeviceConfiguration" ::= { adslXObjects 28 } --****************************************************************** -- --****************************************************************** adslRxPowerCalibration OBJECT-TYPE SYNTAX Integer32 (-1280..2560) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Tuning the received reference power in ADSL chipset. Unit is 1/256 dB. Range [ -5 dB, 10 dB] which corresponds to [ -1280, +2560]. NOTE: This parameter must be set from the configuration file to take effect! To be substituted by adslRxAfeGains for HMI 9.x" REFERENCE "HMI definition of SetDeviceConfiguration" ::= { adslXObjects 29 } --****************************************************************** -- --****************************************************************** adslLineStateLedControl OBJECT-TYPE SYNTAX INTEGER { enable(1), -- FW controls the LEDs disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Line state visualisation functionality (green line-LED). If enabled, the chipset controls the line state LEDs. The feature is avalilable in EDN312 only." ::= { adslXObjects 30 } --****************************************************************** -- --****************************************************************** adslTxFilterConfigHmi5 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "TxFilter in ADSL chipset. The txFilterConfig1 - txFilterConfig2 parameter for the C0 and B0 version of the chipset. Bytes [0..1] for CO version and bytes [2..3] for B0 version. NOTE: This parameter must be set from the configuration file to take effect!" REFERENCE "HMI definition of SetDeviceConfiguration" ::= { adslXObjects 31 } --****************************************************************** -- --****************************************************************** adslTxFilterActualHmi5 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-only STATUS current DESCRIPTION "TxFilter in ADSL chipset. The value of the txFilterConfig1 - txFilterConfig2 acually used in the ADSL chipset." REFERENCE "HMI definition of SetDeviceConfiguration" ::= { adslXObjects 32 } --****************************************************************** -- --****************************************************************** adslEnableDspCoreDump OBJECT-TYPE SYNTAX INTEGER { true (1), false (0)} MAX-ACCESS read-write STATUS deprecated DESCRIPTION "When setting this parameter to 1 (true) the the uC does not load firmware image into the DSP after the next DSP reset. The DSP will then be ready for retrieving the DSP core file. Setting this parameter to 0 (false) for normal operation causing the IP DSLAM to autonomously recover from a DSP malfunction." ::= { adslXObjects 33 } --****************************************************************** -- --****************************************************************** adslEnableACIF OBJECT-TYPE SYNTAX INTEGER { disableACIF (0), enableACIF (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Custom PSD mask with ACIF LPF. By enabling this feature an extra Tx LPF with a cutoff frequency at 950kHz and >27 dB attenuation above 1.5 MHz is inserted. Valid from: EDA 2.0 SP1 Possible values are: 0 - ACIF disabled 1 - ACIF enabled. Maps into HMI: BCM6410: PhysicalLayerConfig.optionFlags Bit[5]. BCM6411: SetTxFilter(ACIF filter). Note: must be set prior to setting adslIfAdminStatus up" ::= { adslXObjects 34 } --****************************************************************** -- --****************************************************************** adslAtucPhysXAllocTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtucPhysXAllocEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides extra information in relation to the adslAtucPhysTable for DSL lines." ::= { adslXObjects 35 } adslAtucPhysXAllocEntry OBJECT-TYPE SYNTAX AdslAtucPhysXAllocEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslAtucPhysXAllocTable." INDEX { lineIndex, tonePartIdIndex } ::= { adslAtucPhysXAllocTable 1 } AdslAtucPhysXAllocEntry ::= SEQUENCE { adslAtucPhysXBitAllocation OCTET STRING } adslAtucPhysXBitAllocation OBJECT-TYPE SYNTAX OCTET STRING (SIZE (488)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Upstream bit allocation table.Tones are split in several blocks of 488 tones. Usage: adslAtucPhysXBitAllocation.lineNo.toneIndexPartId I.e. adslAtucPhysXBitAllocation.1.2 contains tones 489-976 on line 1. This parameter does not support lines running VDSL2. Substituded by: vdsl2SCStatusBitsAlloc Deprecated from: EDA 4.0" ::= { adslAtucPhysXAllocEntry 1 } --****************************************************************** -- --****************************************************************** adslAturPhysXAllocTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAturPhysXAllocEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides extra information in relation to the adslAtucPhysTable for DSL lines." ::= { adslXObjects 36 } adslAturPhysXAllocEntry OBJECT-TYPE SYNTAX AdslAturPhysXAllocEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslAtucPhysXAllocTable." INDEX { lineIndex, tonePartIdIndex } ::= { adslAturPhysXAllocTable 1 } AdslAturPhysXAllocEntry ::= SEQUENCE { adslAturPhysXBitAllocation OCTET STRING } adslAturPhysXBitAllocation OBJECT-TYPE SYNTAX OCTET STRING (SIZE (488)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Downstream bit allocation table. Tones are split in several blocks of 488 tones. Usage: adslAturPhysXBitAllocation.lineNo.toneIndexPartId I.e. adslAturPhysXBitAllocation.1.2 contains tones 489-976 on line 1. This parameter does not support lines running VDSL2. Substituded by: vdsl2SCStatusBitsAlloc Deprecated from: EDA 4.0" ::= { adslAturPhysXAllocEntry 1 } --****************************************************************** -- --****************************************************************** adslAtucPhysXSnrTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtucPhysXSnrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides extra information in relation to the adslAtucPhysTable for DSL lines." ::= { adslXObjects 37 } adslAtucPhysXSnrEntry OBJECT-TYPE SYNTAX AdslAtucPhysXSnrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in adslAtucPhysXSnrTable." INDEX { lineIndex, tonePartIdIndex } ::= { adslAtucPhysXSnrTable 1 } AdslAtucPhysXSnrEntry ::= SEQUENCE { adslAtucPhysXToneSnrUs OCTET STRING } adslAtucPhysXToneSnrUs OBJECT-TYPE SYNTAX OCTET STRING (SIZE (488)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Upstream Snr table. Tones are split in several blocks of 244 tones. Each tone Snr value given in 2 octets (little endian). Usage: adslAtucPhysXToneSnrUs.lineNo.toneIndexPartId I.e. adslAtucPhysXBitSnrDs.1.2 contains tones 245-488 on line 1. Substituded by: vdsl2SCStatusSnr Deprecated from: EDA 4.0" ::= { adslAtucPhysXSnrEntry 1 } --****************************************************************** -- ADSL device config data --****************************************************************** adslDeviceConfigData OBJECT IDENTIFIER ::= { adslXObjects 39 } adslRxAfeGains OBJECT IDENTIFIER ::= { adslDeviceConfigData 1 } adslAgcGains OBJECT IDENTIFIER ::= { adslDeviceConfigData 2 } --****************************************************************** -- adslRxAfeGains Table --****************************************************************** adslRxAfeGains0 OBJECT-TYPE SYNTAX Integer32 (-6400..-2560) MAX-ACCESS read-write STATUS current DESCRIPTION "Fine tune received power (1/256 dB). Used to indicate the attenuation of the received analog front-end between the line and ADC for an AGC gain of 0 dB. Unit is 1/256 dB. The allowed range is [-25, -10] dB. -rxAfeGains0: attenuation in US0 band over POTS -rxAfeGains1: attenuation in US0 band over ISDN -rxAfeGains2: attenuation in US1 band (only forG.992.3) -rxAfeGains3: attenuation in US2 band (only for G.992.3) Substitutes adslRxPowerCalibration." ::= { adslRxAfeGains 1 } adslRxAfeGains1 OBJECT-TYPE SYNTAX Integer32 (-6400..-2560) MAX-ACCESS read-write STATUS current DESCRIPTION "Fine tune received power (1/256 dB). Used to indicate the attenuation of the received analog front-end between the line and ADC for an AGC gain of 0 dB. Unit is 1/256 dB. The allowed range is [-25, -10] dB. -rxAfeGains0: attenuation in US0 band over POTS -rxAfeGains1: attenuation in US0 band over ISDN -rxAfeGains2: attenuation in US1 band (only forG.992.3) -rxAfeGains3: attenuation in US2 band (only for G.992.3) Substitutes adslRxPowerCalibration." ::= { adslRxAfeGains 2 } adslRxAfeGains2 OBJECT-TYPE SYNTAX Integer32 (-6400..-2560) MAX-ACCESS read-write STATUS current DESCRIPTION "Fine tune received power (1/256 dB). Used to indicate the attenuation of the received analog front-end between the line and ADC for an AGC gain of 0 dB. Unit is 1/256 dB. The allowed range is [-25, -10] dB. -rxAfeGains0: attenuation in US0 band over POTS -rxAfeGains1: attenuation in US0 band over ISDN -rxAfeGains2: attenuation in US1 band (only forG.992.3) -rxAfeGains3: attenuation in US2 band (only for G.992.3) Substitutes adslRxPowerCalibration." ::= { adslRxAfeGains 3 } adslRxAfeGains3 OBJECT-TYPE SYNTAX Integer32 (-6400..-2560) MAX-ACCESS read-write STATUS current DESCRIPTION "Fine tune received power (1/256 dB). Used to indicate the attenuation of the received analog front-end between the line and ADC for an AGC gain of 0 dB. Unit is 1/256 dB. The allowed range is [-25, -10] dB. -rxAfeGains0: attenuation in US0 band over POTS -rxAfeGains1: attenuation in US0 band over ISDN -rxAfeGains2: attenuation in US1 band (only forG.992.3) -rxAfeGains3: attenuation in US2 band (only for G.992.3) Substitutes adslRxPowerCalibration." ::= { adslRxAfeGains 4 } --****************************************************************** -- adslAgcGains --****************************************************************** adslAgcGains0 OBJECT-TYPE SYNTAX Integer32 (-4608..6144) MAX-ACCESS read-write STATUS current DESCRIPTION "Fine tune AGC gains (1/256 dB). The agcGains(i), i = 0..6, is used to indicate the real gain of the AGC for a nominal value of (6 * i -12) dB with respect to the AGC setting of 0 dB (agcGains[2] is always equal to 0). Range: [-18, 24] dB" ::= { adslAgcGains 1 } adslAgcGains1 OBJECT-TYPE SYNTAX Integer32 (-4608..6144) MAX-ACCESS read-write STATUS current DESCRIPTION "Fine tune AGC gains (1/256 dB). The agcGains[i], i = 0..6, is used to indicate the real gain of the AGC for a nominal value of (6 * i -12) dB with respect to the AGC setting of 0 dB (agcGains[2] is always equal to 0). Range: [-18, 24] dB" ::= { adslAgcGains 2 } adslAgcGains2 OBJECT-TYPE SYNTAX Integer32 (-4608..6144) MAX-ACCESS read-write STATUS current DESCRIPTION "Fine tune AGC gains (1/256 dB). The agcGains[i], i = 0..6, is used to indicate the real gain of the AGC for a nominal value of (6 * i -12) dB with respect to the AGC setting of 0 dB (agcGains[2] is always equal to 0). Range: [-18, 24] dB" ::= { adslAgcGains 3 } adslAgcGains3 OBJECT-TYPE SYNTAX Integer32 (-4608..6144) MAX-ACCESS read-write STATUS current DESCRIPTION "Fine tune AGC gains (1/256 dB). The agcGains[i], i = 0..6, is used to indicate the real gain of the AGC for a nominal value of (6 * i -12) dB with respect to the AGC setting of 0 dB (agcGains[2] is always equal to 0). Range: [-18, 24] dB" ::= { adslAgcGains 4 } adslAgcGains4 OBJECT-TYPE SYNTAX Integer32 (-4608..6144) MAX-ACCESS read-write STATUS current DESCRIPTION "Fine tune AGC gains (1/256 dB). The agcGains[i], i = 0..6, is used to indicate the real gain of the AGC for a nominal value of (6 * i -12) dB with respect to the AGC setting of 0 dB (agcGains[2] is always equal to 0). Range: [-18, 24] dB" ::= { adslAgcGains 5 } adslAgcGains5 OBJECT-TYPE SYNTAX Integer32 (-4608..6144) MAX-ACCESS read-write STATUS current DESCRIPTION "Fine tune AGC gains (1/256 dB). The agcGains[i], i = 0..6, is used to indicate the real gain of the AGC for a nominal value of (6 * i -12) dB with respect to the AGC setting of 0 dB (agcGains[2] is always equal to 0). Range: [-18, 24] dB" ::= { adslAgcGains 6 } adslAgcGains6 OBJECT-TYPE SYNTAX Integer32 (-4608..6144) MAX-ACCESS read-write STATUS current DESCRIPTION "Fine tune AGC gains (1/256 dB). The agcGains[i], i = 0..6, is used to indicate the real gain of the AGC for a nominal value of (6 * i -12) dB with respect to the AGC setting of 0 dB (agcGains[2] is always equal to 0). Range: [-18, 24] dB" ::= { adslAgcGains 7 } --****************************************************************** -- ADSL ATU-C Performance Data 1-Day Interval Extension --****************************************************************** adslAtuc1DayIntervalXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtuc1DayIntervalXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUC performance data collection in a 1 day measurement interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94)." ::= { adslXObjects 45 } adslAtuc1DayIntervalXEntry OBJECT-TYPE SYNTAX AdslAtuc1DayIntervalXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAtuc1DayIntervalXTable." INDEX { lineIndex, adslAtuc1DayIntervalXNumber } ::= { adslAtuc1DayIntervalXTable 1 } AdslAtuc1DayIntervalXEntry ::= SEQUENCE { adslAtuc1DayIntervalXNumber INTEGER, adslAtuc1DayIntervalXLofs Perf1DayIntervalXCount, adslAtuc1DayIntervalXLoss Perf1DayIntervalXCount, adslAtuc1DayIntervalXLols Perf1DayIntervalXCount, adslAtuc1DayIntervalXESs Perf1DayIntervalXCount, adslAtuc1DayIntervalXEcs Perf1DayIntervalXCount, adslAtuc1DayIntervalXInits Perf1DayIntervalXCount, adslAtuc1DayIntervalXValidData TruthValue } adslAtuc1DayIntervalXNumber OBJECT-TYPE SYNTAX INTEGER(1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Data Interval number 1 is the most recent previous 1 day interval." ::= { adslAtuc1DayIntervalXEntry 1 } adslAtuc1DayIntervalXLofs OBJECT-TYPE SYNTAX Perf1DayIntervalXCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Framing." ::= { adslAtuc1DayIntervalXEntry 5 } adslAtuc1DayIntervalXLoss OBJECT-TYPE SYNTAX Perf1DayIntervalXCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Signal." ::= { adslAtuc1DayIntervalXEntry 10 } adslAtuc1DayIntervalXLols OBJECT-TYPE SYNTAX Perf1DayIntervalXCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Link." ::= { adslAtuc1DayIntervalXEntry 15 } adslAtuc1DayIntervalXESs OBJECT-TYPE SYNTAX Perf1DayIntervalXCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { adslAtuc1DayIntervalXEntry 20 } adslAtuc1DayIntervalXEcs OBJECT-TYPE SYNTAX Perf1DayIntervalXCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of forward error correction seconds in the interval." ::= { adslAtuc1DayIntervalXEntry 25 } adslAtuc1DayIntervalXInits OBJECT-TYPE SYNTAX Perf1DayIntervalXCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the line initialization attempts during the interval. Includes both successful and failed attempts." ::= { adslAtuc1DayIntervalXEntry 30 } adslAtuc1DayIntervalXValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid." ::= { adslAtuc1DayIntervalXEntry 35 } --****************************************************************** -- ADSL ATU-R Performance Data 1-Day Interval Extension --****************************************************************** adslAtur1DayIntervalXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtur1DayIntervalXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUR performance data collection in a 1 day measurement interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94)." ::= { adslXObjects 50 } adslAtur1DayIntervalXEntry OBJECT-TYPE SYNTAX AdslAtur1DayIntervalXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAtur1DayIntervalXTable." INDEX { lineIndex, adslAtur1DayIntervalXNumber } ::= { adslAtur1DayIntervalXTable 1 } AdslAtur1DayIntervalXEntry ::= SEQUENCE { adslAtur1DayIntervalXNumber INTEGER, adslAtur1DayIntervalXLofs Perf1DayIntervalXCount, adslAtur1DayIntervalXLoss Perf1DayIntervalXCount, adslAtur1DayIntervalXLprs Perf1DayIntervalXCount, adslAtur1DayIntervalXESs Perf1DayIntervalXCount, adslAtur1DayIntervalXEcs Perf1DayIntervalXCount, adslAtur1DayIntervalXValidData TruthValue } adslAtur1DayIntervalXNumber OBJECT-TYPE SYNTAX INTEGER(1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Data Interval number 1 is the most recent previous 1 day interval." ::= { adslAtur1DayIntervalXEntry 1 } adslAtur1DayIntervalXLofs OBJECT-TYPE SYNTAX Perf1DayIntervalXCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Framing." ::= { adslAtur1DayIntervalXEntry 5 } adslAtur1DayIntervalXLoss OBJECT-TYPE SYNTAX Perf1DayIntervalXCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Signal." ::= { adslAtur1DayIntervalXEntry 10 } adslAtur1DayIntervalXLprs OBJECT-TYPE SYNTAX Perf1DayIntervalXCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of seconds in the interval when there was Loss of Power." ::= { adslAtur1DayIntervalXEntry 15 } adslAtur1DayIntervalXESs OBJECT-TYPE SYNTAX Perf1DayIntervalXCount UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects." ::= { adslAtur1DayIntervalXEntry 20 } adslAtur1DayIntervalXEcs OBJECT-TYPE SYNTAX Perf1DayIntervalXCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of forward error correction seconds in the interval." ::= { adslAtur1DayIntervalXEntry 25 } adslAtur1DayIntervalXValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid." ::= { adslAtur1DayIntervalXEntry 30 } --****************************************************************** -- ADSL ATU-C Channel Performance Data 1-Day Interval Extension --****************************************************************** adslAtucChan1DayIntervalXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAtucChan1DayIntervalXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUC channel's performance data collection in a 1 day measurement interval. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125)." ::= { adslXObjects 55 } adslAtucChan1DayIntervalXEntry OBJECT-TYPE SYNTAX AdslAtucChan1DayIntervalXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAtucChan1DayIntervalXTable." INDEX { lineIndex, adslAtucChan1DayIntervalXNumber } ::= { adslAtucChan1DayIntervalXTable 1 } AdslAtucChan1DayIntervalXEntry ::= SEQUENCE { adslAtucChan1DayIntervalXNumber INTEGER, adslAtucChan1DayIntervalXCorrectedBlks Perf1DayIntervalXCount, adslAtucChan1DayIntervalXUncorrectBlks Perf1DayIntervalXCount, adslAtucChan1DayIntervalXHecv Perf1DayIntervalXCount, adslAtucChan1DayIntervalXTotalCells Perf1DayIntervalXCount, adslAtucChan1DayIntervalXTotalUserCells Perf1DayIntervalXCount, adslAtucChan1DayIntervalXOverFlowCells Perf1DayIntervalXCount, adslAtucChan1DayIntervalXIdleCells Perf1DayIntervalXCount, adslAtucChan1DayIntervalXIdleCellBitErrors Perf1DayIntervalXCount, adslAtucChan1DayIntervalXValidData TruthValue } adslAtucChan1DayIntervalXNumber OBJECT-TYPE SYNTAX INTEGER(1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Data Interval number 1 is the most recent previous 1 day interval." ::= { adslAtucChan1DayIntervalXEntry 1 } adslAtucChan1DayIntervalXCorrectedBlks OBJECT-TYPE SYNTAX Perf1DayIntervalXCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel during this interval." ::= { adslAtucChan1DayIntervalXEntry 5 } adslAtucChan1DayIntervalXUncorrectBlks OBJECT-TYPE SYNTAX Perf1DayIntervalXCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel during this interval." ::= { adslAtucChan1DayIntervalXEntry 10 } adslAtucChan1DayIntervalXHecv OBJECT-TYPE SYNTAX Perf1DayIntervalXCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all header error correction violations received on this channel during this interval." ::= { adslAtucChan1DayIntervalXEntry 15 } adslAtucChan1DayIntervalXTotalCells OBJECT-TYPE SYNTAX Perf1DayIntervalXCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all ATM cells received on this channel during this interval." ::= { adslAtucChan1DayIntervalXEntry 20 } adslAtucChan1DayIntervalXTotalUserCells OBJECT-TYPE SYNTAX Perf1DayIntervalXCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all valid non-idle ATM cells succesfully transmitted to the UTOPIA bus on this interval." ::= { adslAtucChan1DayIntervalXEntry 25 } adslAtucChan1DayIntervalXOverFlowCells OBJECT-TYPE SYNTAX Perf1DayIntervalXCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count the number of cells discarded due to the received UTOPIA FIFO being full on this interval." ::= { adslAtucChan1DayIntervalXEntry 30 } adslAtucChan1DayIntervalXIdleCells OBJECT-TYPE SYNTAX Perf1DayIntervalXCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all idle ATM cells received on this channel this interval." ::= { adslAtucChan1DayIntervalXEntry 35 } adslAtucChan1DayIntervalXIdleCellBitErrors OBJECT-TYPE SYNTAX Perf1DayIntervalXCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count the number of bit errors in the payload of the valid idle ATM cells received on this channel on this interval." ::= { adslAtucChan1DayIntervalXEntry 40 } adslAtucChan1DayIntervalXValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid." ::= { adslAtucChan1DayIntervalXEntry 45 } --****************************************************************** -- ADSL ATU-R Channel Performance Data 1-Day Interval Extension --****************************************************************** adslAturChan1DayIntervalXTable OBJECT-TYPE SYNTAX SEQUENCE OF AdslAturChan1DayIntervalXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides one row for each ATUR channel's performance data collection in a 1 day measurement interval. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125)." ::= { adslXObjects 60 } adslAturChan1DayIntervalXEntry OBJECT-TYPE SYNTAX AdslAturChan1DayIntervalXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the adslAturChan1DayIntervalXTable." INDEX { lineIndex, adslAturChan1DayIntervalXNumber } ::= { adslAturChan1DayIntervalXTable 1 } AdslAturChan1DayIntervalXEntry ::= SEQUENCE { adslAturChan1DayIntervalXNumber INTEGER, adslAturChan1DayIntervalXCorrectedBlks Perf1DayIntervalXCount, adslAturChan1DayIntervalXUncorrectBlks Perf1DayIntervalXCount, adslAturChan1DayIntervalXHecv Perf1DayIntervalXCount, adslAturChan1DayIntervalXTotalCells Perf1DayIntervalXCount, adslAturChan1DayIntervalXTotalUserCells Perf1DayIntervalXCount, adslAturChan1DayIntervalXIdleCellBitErrors Perf1DayIntervalXCount, adslAturChan1DayIntervalXValidData TruthValue } adslAturChan1DayIntervalXNumber OBJECT-TYPE SYNTAX INTEGER(1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance Data Interval number 1 is the most recent previous 1 day interval." ::= { adslAturChan1DayIntervalXEntry 1 } adslAturChan1DayIntervalXCorrectedBlks OBJECT-TYPE SYNTAX Perf1DayIntervalXCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with errors that were corrected on this channel during this interval." ::= { adslAturChan1DayIntervalXEntry 5 } adslAturChan1DayIntervalXUncorrectBlks OBJECT-TYPE SYNTAX Perf1DayIntervalXCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all blocks received with uncorrectable errors on this channel during this interval." ::= { adslAturChan1DayIntervalXEntry 10 } adslAturChan1DayIntervalXHecv OBJECT-TYPE SYNTAX Perf1DayIntervalXCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all header error correction violations received on this channel during this interval." ::= { adslAturChan1DayIntervalXEntry 15 } adslAturChan1DayIntervalXTotalCells OBJECT-TYPE SYNTAX Perf1DayIntervalXCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all ATM cells received on this channel this interval." ::= { adslAturChan1DayIntervalXEntry 20 } adslAturChan1DayIntervalXTotalUserCells OBJECT-TYPE SYNTAX Perf1DayIntervalXCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count of all valid non-idle ATM cells succesfully received on the UTOPIA bus on this interval." ::= { adslAturChan1DayIntervalXEntry 25 } adslAturChan1DayIntervalXIdleCellBitErrors OBJECT-TYPE SYNTAX Perf1DayIntervalXCount MAX-ACCESS read-only STATUS current DESCRIPTION "Count the number of bit errors in the payload of the valid idle ATM cells received on this channel on this interval. Applies to ADSL2 only." ::= { adslAturChan1DayIntervalXEntry 30 } adslAturChan1DayIntervalXValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid." ::= { adslAturChan1DayIntervalXEntry 35 } tonePartIdIndex OBJECT-TYPE SYNTAX TonePartIdIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Tone Part ID index." ::= { adslXObjects 65 } --****************************************************************** -- trap definitions --****************************************************************** adslAtucXTraps OBJECT IDENTIFIER ::= { adslXTraps 1 } adslAtucXTrapsEntry OBJECT IDENTIFIER ::= { adslAtucXTraps 0 } adslAtucXInitFailureTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, errorCode } STATUS current DESCRIPTION "Sent if initialisation of the line failed. One likely reason is that requested configuration can't be implemented on the current line conditions. More information about the reason can be fetched from the current line status. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Major 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type ProcessingErrorAlarm 7: Probable cause ConfigurationOrCustomisationError 8: Err Code (Additional error information) " --Ericsson Diax additional information: --Format: Initialisation of the indicated line failed from: $2; Probable cause: $7; ErrorCode: $8; Sequence Number: $3; ::= { adslAtucXTrapsEntry 1 } adslAtucIncorrectConfigurationTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, messageId, errorCode } STATUS current DESCRIPTION "The current configuration is not allowed. The operator must change the configuration settings. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Major 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type ProcessingErrorAlarm 7: Probable cause ConfigurationOrCustomisationError 8: Message ID (Internal message number) 9: Err Code (Additional error information) " --Ericsson Diax additional information: --Format: The current configuration is not allowed from: $2; Probable cause: $7; MessageId: $8; ErrorCode: $9; Sequence Number: $3; ::= { adslAtucXTrapsEntry 2 } adslAtucPerfXESsThresh15MinTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAtucThresh15MinESs } STATUS current DESCRIPTION "Errored Second 15-minute interval threshold reached. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAtucThresh15MinESs threshold value) " --Ericsson Diax additional information: --Format: Errored Second 15-minute interval threshold reached: ATU-C from: $2; Probable cause: $7; Number of Errored Seconds: $8; Sequence Number: $3; ::= { adslAtucXTrapsEntry 3 } adslAtucPerfXESsThresh1DayTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAlarmConfXAtucThres1DayES } STATUS current DESCRIPTION "Errored Second 1 Day interval threshold reached. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAlarmConfXAtucThres1DayES threshold value) " --Ericsson Diax additional information: --Format: Errored Second 1 Day interval threshold reached: ATU-C from: $2; Probable cause: $7; Number of Errored Seconds: $8; Sequence Number: $3; ::= { adslAtucXTrapsEntry 4 } adslAtucPerfXSesThresh15MinTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAtucThreshold15MinSesL } STATUS current DESCRIPTION "Severely Errored Second 15-minute interval threshold reached. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAtucThreshold15MinSesL threshold value) " --Ericsson Diax additional information: --Format: Severely Errored Second 15-minute interval threshold reached: ATU-C from: $2; Probable cause: $7; Threshold value: $8; Sequence Number: $3; ::= { adslAtucXTrapsEntry 5 } adslAtucPerfXSesThresh1DayTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAlarmConfXAtucThres1DaySesL } STATUS current DESCRIPTION "Severely Errored Second 1 Day interval threshold reached. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAlarmConfXAtucThres1DaySesL threshold value) " --Ericsson Diax additional information: --Format: Severely Errored Second 1 Day interval threshold reached: ATU-C from: $2; Probable cause: $7; Number of Severely Errored Seconds: $8; Sequence Number: $3; ::= { adslAtucXTrapsEntry 6 } adslAtucPerfXUasThresh15MinTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAtucThreshold15MinUasL } STATUS current DESCRIPTION "Unavailable Second 15-minute interval threshold reached. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAtucThreshold15MinUasL threshold value) " --Ericsson Diax additional information: --Format: Unavailable Second 15-minute interval threshold reached: ATU-C from: $2; Probable cause: $7; Threshold value: $8; Sequence Number: $3; ::= { adslAtucXTrapsEntry 7 } adslAtucPerfXUasThresh1DayTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAlarmConfXAtucThres1DayUasL } STATUS current DESCRIPTION "Unavailable Second 1 Day interval threshold reached. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAlarmConfXAtucThres1DayUasL threshold value) " --Ericsson Diax additional information: --Format: Unavailable Second 1 Day interval threshold reached: ATU-C from: $2; Probable cause: $7; Number of Unavailable Seconds: $8; Sequence Number: $3; ::= { adslAtucXTrapsEntry 8 } adslAtucDspUnexpectedResponseTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, messageId, errorCode } STATUS current DESCRIPTION "DSP replies with an unexpected result code such as: 'unknown application id', 'unknown command id', 'wrong message format', 'request data not valid' or 'request cannot be performed in current state'. This should not happen and comes from either incompatible SW versions or state mismatch between UC and DSP due to internal SW problems. If necessary a LinkDown should proceed this fault.The line will be reset and possibly taken into service again. In case too many line resets have been performed a DSP Communication Failure shall be triggered and the DSP reset and reloaded. The operator must change the configuration settings. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Minor 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type Equipment 7: Probable cause UnexpectedInformation 8: Message ID (Internal message number) 9: Err Code (Additional error information) " --Ericsson Diax additional information: --Format: DSP replies with an unexpected result code from: $2; Probable cause: $7; MessageId: $8; ErrorCode: $9; Sequence Number: $3; ::= { adslAtucXTrapsEntry 9 } adslAtucDspLineResetTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause } STATUS current DESCRIPTION "The indicated line has autonomously reset itself. This should not occur and can be due to CPU overload or some other internal DSP SW failure. If necessary a LinkDown should proceed this fault. The line will be reset and possibly taken into service again. In case too many line resets have been performed a DSP Communication Failure shall be triggered and the DSP reset and reloaded. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Minor 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type ProcessingErrorAlarm 7: Probable cause EquipmentMalfunction " --Ericsson Diax additional information: --Format: The indicated line has autonomously reset itself from: $2; Probable cause: $7; Sequence Number: $3; ::= { adslAtucXTrapsEntry 10 } adslAtucLineQualityThreshNotReachedTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAtucLineQualityThresChan0 } STATUS current DESCRIPTION "Line Quality threshold not reached. Valid from: EDA 2.1 Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause ThresholdCrossed 8: Threshold Line quality alarm threshold " --Ericsson Diax additional information: --Format: Line Quality threshold not reached: ATU-C from: $2; Probable cause: $7; Threshold: $8; Sequence Number: $3; ::= { adslAtucXTrapsEntry 11 } adslAtucLineBondLineQualityThreshNotReachedTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAtucLineBondLineQualityThres } STATUS current DESCRIPTION "Line Quality threshold not reached. Valid from: EDA 2.2 Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause ThresholdCrossed 8: Threshold Line quality alarm threshold " --Ericsson Diax additional information: --Format: Line Quality threshold not reached: ATU-C from: $2; Probable cause: $7; Threshold: $8; Sequence Number: $3; ::= { adslAtucXTrapsEntry 12 } adslAtucPerfXLofsThresh15MinTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAtucThresh15MinLofs } STATUS current DESCRIPTION "Count of Loss of Frame seconds in current 15-minute interval has reached the threshold value configured by the adslAtucThresh15MinLofs parameter. Valid from: EDA 2.2 MA2 Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAtucThresh15MinLofs threshold value) " --Ericsson Diax additional information: --Format: Loss of Frame Second 15-minute interval threshold reached: ATU-C from: $2; Probable cause: $7; Threshold value: $8; Sequence Number: $3; ::= { adslAtucXTrapsEntry 15 } adslAtucPerfXLofsThresh1DayTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAlarmConfXAtucThres1DayLofs } STATUS current DESCRIPTION "Count of Loss of Frame seconds in current 1-day interval has reached the threshold value configured by adslAlarmConfXAtucThres1DayLofs parameter. Valid from: EDA 2.2 MA2 Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAlarmConfXAtucThres1DayLofs threshold value) " --Ericsson Diax additional information: --Format: Loss of Frame Second 1 Day interval threshold reached: ATU-C from: $2; Probable cause: $7; Threshold value: $8; Sequence Number: $3; ::= { adslAtucXTrapsEntry 20 } adslAtucPerfXLossThresh15MinTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAtucThresh15MinLoss } STATUS current DESCRIPTION "Count of Loss of Signal seconds in current 15-minute interval has reached the threshold value configured by the adslAtucThresh15MinLoss parameter. Valid from: EDA 2.2 MA2 Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAtucThresh15MinLoss threshold value) " --Ericsson Diax additional information: --Format: Loss of Signal Second 15-minute interval threshold reached: ATU-C from: $2; Probable cause: $7; Threshold value: $8; Sequence Number: $3; ::= { adslAtucXTrapsEntry 25 } adslAtucPerfXLossThresh1DayTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAlarmConfXAtucThres1DayLoss } STATUS current DESCRIPTION "Count of Loss of Signal seconds in current 1-day interval has reached the threshold value configured by adslAlarmConfXAtucThres1DayLoss parameter. Valid from: EDA 2.2 MA2 Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAlarmConfXAtucThres1DayLoss threshold value) " --Ericsson Diax additional information: --Format: Loss of Signal Second 1 Day interval threshold reached: ATU-C from: $2; Probable cause: $7; Threshold value: $8; Sequence Number: $3; ::= { adslAtucXTrapsEntry 30 } adslAtucPerfXLolsThresh15MinTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAtucThresh15MinLols } STATUS current DESCRIPTION "Count of Loss of Link seconds in current 15-minute interval has reached the threshold value configured by the adslAtucThresh15MinLols parameter. Valid from: EDA 2.2 MA2 Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAtucThresh15MinLols threshold value) " --Ericsson Diax additional information: --Format: Loss of Link Second 15-minute interval threshold reached: ATU-C from: $2; Probable cause: $7; Threshold value: $8; Sequence Number: $3; ::= { adslAtucXTrapsEntry 35 } adslAtucPerfXLolsThresh1DayTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAlarmConfXAtucThres1DayLols } STATUS current DESCRIPTION "Count of Loss of Link seconds in current 1-day interval has reached the threshold value configured by adslAlarmConfXAtucThres1DayLols parameter. Valid from: EDA 2.2 MA2 Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAlarmConfXAtucThres1DayLols threshold value) " --Ericsson Diax additional information: --Format: Loss of Link Second 1 Day interval threshold reached: ATU-C from: $2; Probable cause: $7; Threshold value: $8; Sequence Number: $3; ::= { adslAtucXTrapsEntry 40 } adslAturXTraps OBJECT IDENTIFIER ::= { adslXTraps 2 } adslAturXTrapsEntry OBJECT IDENTIFIER ::= { adslAturXTraps 0 } adslAturPerfXESsThresh15MinTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAturThresh15MinESs } STATUS current DESCRIPTION "Errored Second 15-minute interval threshold reached. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAturThresh15MinESs threshold value) " --Ericsson Diax additional information: --Format: Errored Second 15-minute interval threshold reached: ATU-R from: $2; Probable cause: $7; Number of Errored Seconds: $8; Sequence Number: $3; ::= { adslAturXTrapsEntry 2 } adslAturPerfXESsThresh1DayTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAlarmConfXAturThres1DayES } STATUS current DESCRIPTION "Errored Second 1 Day interval threshold reached. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAlarmConfXAturThres1DayES threshold value) " --Ericsson Diax additional information: --Format: Errored Second 1 Day interval threshold reached: ATU-R from: $2; Probable cause: $7; Number of Errored Seconds: $8; Sequence Number: $3; ::= { adslAturXTrapsEntry 3 } adslAturPerfXSesThresh15MinTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAturThreshold15MinSesL } STATUS current DESCRIPTION "Severely Errored Second 15-minute interval threshold reached. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAturThreshold15MinSesL threshold value) " --Ericsson Diax additional information: --Format: Severely Errored Second 15-minute interval threshold reached: ATU-R from: $2; Probable cause: $7; Threshold value: $8; Sequence Number: $3; ::= { adslAturXTrapsEntry 4 } adslAturPerfXSesThresh1DayTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAlarmConfXAturThres1DaySesL } STATUS current DESCRIPTION "Severely Errored Second 1 Day interval threshold reached. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAlarmConfXAturThres1DaySesL threshold value) " --Ericsson Diax additional information: --Format: Severely Errored Second 1 Day interval threshold reached: ATU-R from: $2; Probable cause: $7; Number of Severely Errored Seconds: $8; Sequence Number: $3; ::= { adslAturXTrapsEntry 5 } adslAturPerfXUasThresh15MinTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAturThreshold15MinUasL } STATUS current DESCRIPTION "Unavailable Second 15-minute interval threshold reached. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAturThreshold15MinUasL threshold value) " --Ericsson Diax additional information: --Format: Unavailable Second 15-minute interval threshold reached: ATU-R from: $2; Probable cause: $7; Threshold value: $8; Sequence Number: $3; ::= { adslAturXTrapsEntry 6 } adslAturPerfXUasThresh1DayTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAlarmConfXAturThres1DayUasL } STATUS current DESCRIPTION "Unavailable Second 1 Day interval threshold reached. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAlarmConfXAturThres1DayUasL threshold value) " --Ericsson Diax additional information: --Format: Unavailable Second 1 Day interval threshold reached: ATU-R from: $2; Probable cause: $7; Number of Unavailable Seconds: $8; Sequence Number: $3; ::= { adslAturXTrapsEntry 7 } adslAturLineQualityThreshNotReachedTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAturLineQualityThresChan0 } STATUS current DESCRIPTION "Line Quality threshold not reached. Valid from: EDA 2.1 Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause ThresholdCrossed 8: Threshold Line quality alarm threshold " --Ericsson Diax additional information: --Format: Line Quality threshold not reached: ATU-R from: $2; Probable cause: $7; Threshold: $8; Sequence Number: $3; ::= { adslAturXTrapsEntry 8 } adslAturLineBondLineQualityThreshNotReachedTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAturLineBondLineQualityThres } STATUS current DESCRIPTION "Line Quality threshold not reached. Valid from: EDA 2.2 Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause ThresholdCrossed 8: Threshold Line quality alarm threshold " --Ericsson Diax additional information: --Format: Line Quality threshold not reached: ATU-R from: $2; Probable cause: $7; Threshold: $8; Sequence Number: $3; ::= { adslAturXTrapsEntry 9 } adslAturPerfXLofsThresh15MinTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAturThresh15MinLofs } STATUS current DESCRIPTION "Count of Loss of Frame seconds in current 15-minute interval has reached the threshold value configured by the adslAturThresh15MinLofs parameter. Valid from: EDA 2.2 MA2 Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAturThresh15MinLofs threshold value) " --Ericsson Diax additional information: --Format: Loss of Frame Second 15-minute interval threshold reached: ATU-R from: $2; Probable cause: $7; Threshold value: $8; Sequence Number: $3; ::= { adslAturXTrapsEntry 15 } adslAturPerfXLofsThresh1DayTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAlarmConfXAturThres1DayLofs } STATUS current DESCRIPTION "Count of Loss of Frame seconds in current 1-day interval has reached the threshold value configured by the adslAlarmConfXAturThres1DayLofs parameter. Valid from: EDA 2.2 MA2 Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAlarmConfXAturThres1DayLofs threshold value) " --Ericsson Diax additional information: --Format: Loss of Frame Second 1 Day interval threshold reached: ATU-R from: $2; Probable cause: $7; Threshold value: $8; Sequence Number: $3; ::= { adslAturXTrapsEntry 20 } adslAturPerfXLossThresh15MinTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAturThresh15MinLoss } STATUS current DESCRIPTION "Count of Loss of Signal seconds in current 15-minute interval has reached the threshold value configured by the adslAturThresh15MinLoss parameter. Valid from: EDA 2.2 MA2 Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAturThresh15MinLoss threshold value) " --Ericsson Diax additional information: --Format: Loss of Signal Second 15-minute interval threshold reached: ATU-R from: $2; Probable cause: $7; Threshold value: $8; Sequence Number: $3; ::= { adslAturXTrapsEntry 25 } adslAturPerfXLossThresh1DayTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAlarmConfXAturThres1DayLoss } STATUS current DESCRIPTION "Count of Loss of Signal seconds in current 1-day interval has reached the threshold value configured by the adslAlarmConfXAturThres1DayLoss parameter. Valid from: EDA 2.2 MA2 Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAlarmConfXAturThres1DayLoss threshold value) " --Ericsson Diax additional information: --Format: Loss of Signal Second 1 Day interval threshold reached: ATU-R from: $2; Probable cause: $7; Threshold value: $8; Sequence Number: $3; ::= { adslAturXTrapsEntry 30 } adslAturPerfXLprsThresh15MinTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAturThresh15MinLprs } STATUS current DESCRIPTION "Count of Loss of Power seconds in current 15-minute interval has reached the threshold value configured by the adslAtucThresh15MinLprs parameter. Valid from: EDA 2.2 MA2 Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAturThresh15MinLprs threshold value) " --Ericsson Diax additional information: --Format: Loss of Power Second 15-minute interval threshold reached: ATU-R from: $2; Probable cause: $7; Threshold value: $8; Sequence Number: $3; ::= { adslAturXTrapsEntry 35 } adslAturPerfXLprsThresh1DayTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause, adslAlarmConfXAturThres1DayLprs } STATUS current DESCRIPTION "Count of Loss of Power seconds in current 1-day interval has reached the threshold value configured by the adslAlarmConfXAturThres1DayLprs parameter. Valid from: EDA 2.2 MA2 Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Warning 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type QualityOfServiceAlarm 7: Probable cause TransmissionError 8: Threshold parameter (adslAlarmConfXAturThres1DayLprs threshold value) " --Ericsson Diax additional information: --Format: Loss of Power Second 1 Day interval threshold reached: ATU-R from: $2; Probable cause: $7; Threshold value: $8; Sequence Number: $3; ::= { adslAturXTrapsEntry 40 } adslDeviceTraps OBJECT IDENTIFIER ::= { adslXTraps 3 } adslDeviceTrapsEntry OBJECT IDENTIFIER ::= { adslDeviceTraps 0 } adslDspLoadingFailureTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause } STATUS current DESCRIPTION "DSP software could not be loaded and started, either incompatible or inoperable HW, damaged or wrong load file. ADSL system inoperable. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM 2: Managed object ID (MAC) 3: Sequence number (Alarm sequence number) 4: Perceived severity Critical 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type Equipment 7: Probable cause EquipmentMalfunction " --Ericsson Diax additional information: --Format: DSP software could not be loaded and started from: $2; Probable cause: $7; Sequence Number: $3; ::= { adslDeviceTrapsEntry 1 } adslDspCommunicationFailureTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause } STATUS current DESCRIPTION "DSP does not reply to a request or too many DSP Unexpected Response Failures have been detected. DSP will be reset and reloaded. Affects all lines in the IP DSLAM. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM 2: Managed object ID (MAC) 3: Sequence number (Alarm sequence number) 4: Perceived severity Major 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type CommunicationsAlarm 7: Probable cause SoftwareError " --Ericsson Diax additional information: --Format: DSP does not reply to a request or too many DSP Unexpected Response Failures have been detected from: $2; Probable cause: $7; Sequence Number: $3; ::= { adslDeviceTrapsEntry 3 } adslDspInoperableTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause } STATUS current DESCRIPTION "The DSP has been reloaded and restarted to many times due to errors. ADSL is considered inoperable. In case SW load modules are correct this is most likely a HW problem. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM 2: Managed object ID (MAC) 3: Sequence number (Alarm sequence number) 4: Perceived severity Critical 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type Equipment 7: Probable cause EquipmentMalfunction " --Ericsson Diax additional information: --Format: The DSP has been reloaded and restarted to many times due to errors from: $2; Probable cause: $7; Sequence Number: $3; ::= { adslDeviceTrapsEntry 4 } adslDspHardwareFailureTrap NOTIFICATION-TYPE OBJECTS { managedObjectClass, managedObjectInstance, sequenceNumber, perceivedSeverity, eventTime, eventTypePem, probableCause } STATUS obsolete DESCRIPTION "HW failure was detected. HW should be replaced. ADSL system is inoperable. Valid from: EDA 1.1R2A Obsoleted from: EDA 2.2R1A Parameters 1: Managed object class IP DSLAM 2: Managed object ID (MAC) 3: Sequence number (Alarm sequence number) 4: Perceived severity Critical 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type Equipment 7: Probable cause EquipmentMalfunction " --Ericsson Diax additional information: --Format: HW failure was detected from: $2; Probable cause: $7; Sequence Number: $3; ::= { adslDeviceTrapsEntry 5 } adslXObjectsGroup OBJECT-GROUP OBJECTS { adslPowerModes, adslTxPowerCalibration, adslRxPowerCalibration, adslLineStateLedControl, adslTxFilterConfigHmi5, adslTxFilterActualHmi5, adslEnableACIF, adslAtucPhysXPreviousSnrMgn,adslAtucPhysXPreviousOutputPwr,adslAtucPhysXBitAllocTable, adslAtucPhysXSnr,adslAtucPhysXLoopAtn, adslAturPhysXPreviousSnrMgn, adslAturPhysXPreviousOutputPwr, adslAturPhysXBitAllocTable, adslAturPhysXBitAllocTableExt, adslAturPhysXLoopAtn, adslConfXName,adslConfXAtucFrequencyBins,adslConfXAturFrequencyBins, adslPowerManagementMode, adslAlarmConfXName,adslAlarmConfXAtucThres1DayES,adslAlarmConfXAturThres1DayES, adslAlarmConfXAtucThres1DaySesL,adslAlarmConfXAturThres1DaySesL, adslAlarmConfXAtucThres1DayUasL,adslAlarmConfXAturThres1DayUasL, adslAlarmConfXAtucThres1DayLofs, adslAlarmConfXAturThres1DayLofs, adslAlarmConfXAtucThres1DayLoss, adslAlarmConfXAturThres1DayLoss, adslAlarmConfXAtucThres1DayLols, adslAlarmConfXAturThres1DayLprs, adslAtucPerfXEcs,adslAtucPerfXCurr15MinEcs,adslAtucPerfXCurr1DayEcs, adslAtucPerfXPrev1DayEcs, adslAtucPerfX1DayValidIntervals, adslAtucPerfX1DayInvalidIntervals, adslAturPerfXEcs,adslAturPerfXCurr15MinEcs,adslAturPerfXCurr1DayEcs, adslAturPerfXPrev1DayEcs, adslAturPerfX1DayValidIntervals, adslAturPerfX1DayInvalidIntervals, adslAtucIntervalXEcs, adslAturIntervalXEcs, adslAtucChanPerfXCurr15MinHecv,adslAtucChanPerfXCurr15MinTotalCells, adslAtucChanPerfXCurr15MinTotalUserCells,adslAtucChanPerfXCurr15MinOverFlowCells, adslAtucChanPerfXCurr15MinIdleCells,adslAtucChanPerfXCurr15MinIdleCellBitErrors, adslAtucChanPerfXCurr1DayHecv, adslAtucChanPerfXCurr1DayTotalCells, adslAtucChanPerfXCurr1DayTotalUserCells,adslAtucChanPerfXCurr1DayOverFlowCells, adslAtucChanPerfXCurr1DayIdleCells,adslAtucChanPerfXCurr1DayIdleCellBitErr, adslAtucChanPerfXPrev1DayHecv,adslAtucChanPerfXPrev1DayTotalCells, adslAtucChanPerfXPrev1DayTotalUserCells,adslAtucChanPerfXPrev1DayOverFlowCells, adslAtucChanPerfXPrev1DayIdleCells,adslAtucChanPerfXPrev1DayIdleCellBitErr, adslAturChanPerfXCurr15MinHecv,adslAturChanPerfXCurr15MinTotalCells, adslAturChanPerfXCurr15MinTotalUserCells,adslAturChanPerfXCurr1DayHecv, adslAturChanPerfXCurr1DayTotalCells,adslAturChanPerfXCurr1DayTotalUserCells, adslAturChanPerfXPrev1DayHecv,adslAturChanPerfXPrev1DayTotalCells, adslAturChanPerfXPrev1DayTotalUserCells, adslAturChanPerfXCurr15MinIdleCellBitErrors, adslAturChanPerfXCurr1DayIdleCellBitErr,adslAturChanPerfXPrev1DayIdleCellBitErr, adslAtucChanIntervalXHecv,adslAtucChanIntervalXTotalCells, adslAtucChanIntervalXTotalUserCells,adslAtucChanIntervalXOverFlowCells, adslAtucChanIntervalXIdleCells,adslAtucChanIntervalXIdleCellBitErrors, adslAturChanIntervalXHecv,adslAturChanIntervalXTotalCells, adslAturChanIntervalXTotalUserCells, adslAturChanIntervalXIdleCellBitErrors, adslAtucProprietaryPhysXCodingType, adslAtucProprietaryPhysXCurrentFailures,adslAtucProprietaryPhysXChangedFailures, adslAtucProprietaryPhysXActualLineBitRate,adslAtucProprietaryPhysXPreviousLineBitRate, adslAtucProprietaryPhysXMSGc,adslAtucProprietaryPhysXMSGlp,adslAtucProprietaryRefPsd, adslAturProprietaryPhysXCodingType, adslAturProprietaryPhysXCurrentFailures,adslAturProprietaryPhysXChangedFailures, adslAturProprietaryPhysXActualLineBitRate,adslAturProprietaryPhysXPreviousLineBitRate, adslAturProprietaryPhysXMSGc,adslAturProprietaryPhysXMSGlp, adslAturProprietaryRefPsd, adslAturProprietaryChanXB,adslAturProprietaryChanXN,adslAturProprietaryChanXR, adslAturProprietaryChanXD,adslAturProprietaryChanXSnum, adslAturProprietaryChanXSdenom,adslAturProprietaryChanXL, adslAturProprietaryChanXM,adslAturProprietaryChanXT, adslAtucProprietaryChanXB,adslAtucProprietaryChanXN,adslAtucProprietaryChanXR, adslAtucProprietaryChanXD,adslAtucProprietaryChanXSnum, adslAtucProprietaryChanXSdenom,adslAtucProprietaryChanXL, adslAtucProprietaryChanXM,adslAtucProprietaryChanXT, adslAtucProprietaryConfXMaxPower,adslAtucProprietaryConfXFixedPsd, adslAtucProprietaryConfXPowerAdaptivity,adslAtucProprietaryConfXOptionsFlagBit2, adslAtucProprietaryConfXDisableTrellis,adslAtucProprietaryConfXRestartMode,adslAtucProprietaryConfXMaxFramingMode, adslAtucProprietaryConfXDisableBitSwap,adslAturProprietaryConfXDisableBitSwap, adslAtucProprietaryConfXDisableHighBitRateInGLite, adslAtucProprietaryChanConfXTxAtmFlagsFast, adslAtucProprietaryChanConfXRxAtmFlagsFast, adslAtucProprietaryChanConfXTxAtmFlagsIlv,adslAtucProprietaryChanConfXRxAtmFlagsIlv, adslAturProprietaryConfXMaxPower, adslAtucProprietaryConfXBoostFactor, adslAtucProprietaryConfXMaxRxPower, adslAtucProprietaryConfXDeltaPsdNormal, adslAtucProprietaryConfXDeltaPsdPlus, adslAtucProprietaryConfXDeltaPsdReach, adslAturProprietaryConfXDeltaPsdNormal, adslAturProprietaryConfXDeltaPsdPlus, adslAturProprietaryConfXDeltaPsdReach, adslAtucProprietaryConfXAutomodePIalpha, adslAtucProprietaryConfXAutomodePIbeta, adslAtucProprietaryConfXOptionsFlagBit4, adslAtucProprietaryConfXAdslPlusTxFilterId, adslAtucProprietaryConfXDisableUS1bitConst, adslAtucProprietaryConfXDisableWindowing, adslAtucProprietaryConfXDisableShowtimeExit, adslAtucProprietaryConfXDisableNitro, adslAtucProprietaryConfXDisableUpdateTestParameters, adslAtucProprietaryConfXTssiShapeNrOfBreakPoints, adslAtucProprietaryConfXTssiShapeAdsl2ProtocolType, adslAtucProprietaryConfXTssiShapeBreakPoint,adslAtucProprietaryChanConfXINPminIlvB0, adslAtucProprietaryChanConfXINPminFastB0, adslAtucProprietaryChanConfXINPminFastB1, adslAturProprietaryChanConfXINPminIlvB0, adslAturProprietaryChanConfXINPminFastB0, adslAturProprietaryChanConfXINPminFastB1, adslAtucProprietaryConfXDisableShalfOptionBit0, adslAtucProprietaryConfXDisableShalfOptionBit1, adslAtucProprietaryConfXDisableLargeD, adslAtucProprietaryConfXForceSegmentation, adslAtucProprietaryConfXRelaxInpMinCheck, adslAtucProprietaryConfXhsTxPSD0, adslAtucProprietaryConfXhsTxPSD1, adslAtucProprietaryConfXhsTxPSD2, adslAtucProprietaryChanMinL2BitRateB0, adslAtucProprietaryChanMinL2BitRateB1, adslAtucProprietaryChanL2LowRateSlotsB0, adslAtucProprietaryChanL2LowRateSlotsB1, adslAtucProprietaryChanL2PacketB0, adslAtucProprietaryChanL2PacketB1, adslAtucProprietaryChanMaxL2BitRateB0, adslAtucProprietaryChanMaxL2BitRateB1, adslAtucProprietaryL2TestConfigBit0, adslAtucProprietaryL2TestConfigBit1, adslAtucProprietaryL2TestConfigBit2, adslAtucProprietaryL2MinAtpr, adslAtucProprietaryL0Time, adslAtucProprietaryL2Time, adslAtucProprietaryL2Atpr, adslAtucProprietaryL2Atprt, adslAtucProprietaryRateAdaptationFlagsBit0Upstream, adslAtucProprietaryRateAdaptationFlagsBit0Downstream, adslLineXTransAtucCap, adslLineXTransAtucConfig,adslLineXTransAtucActual,adslLineXTransAturCap, adslProprietaryPerfDataXReset, adslProprietaryPerfDataXSinceResetTimeElapsed, adslAtucLineQualityThresChan0, adslAtucLineQualityThresChan1, adslAturLineQualityThresChan0, adslAturLineQualityThresChan1, adslAtuc1DayIntervalXLofs, adslAtuc1DayIntervalXLoss,adslAtuc1DayIntervalXLols, adslAtuc1DayIntervalXESs, adslAtuc1DayIntervalXEcs, adslAtuc1DayIntervalXInits, adslAtuc1DayIntervalXValidData, adslAtur1DayIntervalXLofs, adslAtur1DayIntervalXLoss, adslAtur1DayIntervalXLprs, adslAtur1DayIntervalXESs, adslAtur1DayIntervalXEcs, adslAtur1DayIntervalXValidData, adslAtucChan1DayIntervalXCorrectedBlks, adslAtucChan1DayIntervalXUncorrectBlks, adslAtucChan1DayIntervalXHecv, adslAtucChan1DayIntervalXTotalCells, adslAtucChan1DayIntervalXTotalUserCells, adslAtucChan1DayIntervalXOverFlowCells, adslAtucChan1DayIntervalXIdleCells, adslAtucChan1DayIntervalXIdleCellBitErrors, adslAtucChan1DayIntervalXValidData, adslAturChan1DayIntervalXCorrectedBlks, adslAturChan1DayIntervalXUncorrectBlks, adslAturChan1DayIntervalXHecv, adslAturChan1DayIntervalXTotalCells, adslAturChan1DayIntervalXTotalUserCells, adslAturChan1DayIntervalXIdleCellBitErrors, adslAturChan1DayIntervalXValidData } STATUS current DESCRIPTION "Current adslXObjects Group" ::= { adslXObjectsGroups 1 } adslXObjectsDeprecatedGroup OBJECT-GROUP OBJECTS { adslAtucProprietaryConfXOptionsFlagBit5, adslEnableDspCoreDump } STATUS deprecated DESCRIPTION "Deprecated adslXObjects Group" ::= { adslXObjectsGroups 2 } adslXObjectsObsoleteGroup OBJECT-GROUP OBJECTS { adslTxFilterConfig, adslTxFilterActual,adslConfXFrequencyBins, adslAtucProprietaryPhysXLogS, adslAturProprietaryPhysXLogS, adslAtucProprietaryConfXMaxPsd, adslAtucProprietaryConfXOptionsFlagBit1, adslAtucProprietaryChanConfXOptimiseImpulseNoiseResilienceIlv, adslAtucProprietaryChanConfXOptimiseImpulseNoiseResilienceFast, adslAturProprietaryConfXMaxPsd, adslAturProprietaryChanConfXOptimiseImpulseNoiseResilienceIlv, adslAturProprietaryChanConfXOptimiseImpulseNoiseResilienceFast } STATUS obsolete DESCRIPTION "Deprecated adslXObjects Group" ::= { adslXObjectsGroups 3 } adslXTrapsGroup NOTIFICATION-GROUP NOTIFICATIONS { adslAtucXInitFailureTrap, adslAtucIncorrectConfigurationTrap, adslAtucPerfXESsThresh15MinTrap, adslAtucPerfXESsThresh1DayTrap, adslAtucPerfXSesThresh15MinTrap, adslAtucPerfXSesThresh1DayTrap, adslAtucPerfXUasThresh15MinTrap, adslAtucPerfXUasThresh1DayTrap, adslAtucPerfXLofsThresh15MinTrap, adslAtucPerfXLofsThresh1DayTrap, adslAtucPerfXLossThresh15MinTrap, adslAtucPerfXLossThresh1DayTrap, adslAtucPerfXLolsThresh15MinTrap, adslAtucPerfXLolsThresh1DayTrap, adslAtucDspUnexpectedResponseTrap, adslAtucDspLineResetTrap, adslAtucLineQualityThreshNotReachedTrap, adslAturPerfXESsThresh15MinTrap, adslAturPerfXESsThresh1DayTrap, adslAturPerfXSesThresh15MinTrap, adslAturPerfXSesThresh1DayTrap, adslAturPerfXUasThresh15MinTrap, adslAturPerfXUasThresh1DayTrap, adslAturPerfXLofsThresh15MinTrap, adslAturPerfXLofsThresh1DayTrap, adslAturPerfXLossThresh15MinTrap, adslAturPerfXLossThresh1DayTrap, adslAturPerfXLprsThresh15MinTrap, adslAturPerfXLprsThresh1DayTrap, adslAturLineQualityThreshNotReachedTrap, adslDspLoadingFailureTrap, adslDspCommunicationFailureTrap, adslDspInoperableTrap, adslDspHardwareFailureTrap } STATUS current DESCRIPTION "adslX Traps Group" ::= { adslXTrapsGroups 1 } END