PDN-XDSL-INTERFACE-MIB :: xdslDevIDSLSpecificIfConfigTimingPortTransceiverMode

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › PDN-XDSL-INTERFACE-MIB › xdslDevIDSLSpecificIfConfigTimingPortTransceiverMode

xdslDevIDSLSpecificIfConfigTimingPortTransceiverMode

Module: PDN-XDSL-INTERFACE-MIB

OID (symbolic): PDN-XDSL-INTERFACE-MIB::xdslDevIDSLSpecificIfConfigTimingPortTransceiverMode

OID (numeric): 1.3.6.1.4.1.1795.2.24.9.2.5.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The transceiver mode selected on the timing source port. Only one IDSL port can be set to NT mode. This timing will then be distributed to all other IDSL ports in the chassis that are set to LT.

The selected xdslDevIDSLPrimaryTimingSourcePort provides clocking signals to the DSLAM when the transceiver mode is set to Network timing. The port selected for Network Timing mode will probably not used for customer data, but will receive a 2.048 Mhz Network clocking signal from a central office timing source and distribute this timing to other IDSL port cards.

What is xdslDevIDSLSpecificIfConfigTimingPortTransceiverMode?

Selects whether this IDSL port provides network timing (only one port per chassis can be Network Timing) or takes local timing distributed from that port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.9.2.5.1.1.2
snmpwalk -v2c -c public <target> PDN-XDSL-INTERFACE-MIB::xdslDevIDSLSpecificIfConfigTimingPortTransceiverMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.9.2.5.1.1.2.1
snmpget -v2c -c public <target> PDN-XDSL-INTERFACE-MIB::xdslDevIDSLSpecificIfConfigTimingPortTransceiverMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.9.2.5.1.1.2.1 i <value>

Start monitoring Paradyne Networks xDSL equipment (generic/RADSL/MVL interface configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-XDSL-INTERFACE-MIB::xdslDevIDSLSpecificIfConfigTimingPortTransceiverMode OID value, configure state conditions and alerts, and monitor any Paradyne Networks xDSL equipment (generic/RADSL/MVL interface configuration) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1795pdynPDN-HEADER-MIB
1.3.6.1.4.1.1795.2pdn_mgmtPDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24paradynePDN-HEADER-MIB
1.3.6.1.4.1.1795.2.24.9pdn_xdslPDN-HEADER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1795.2.24.9.2xdslIfConfigMIBObjectsPDN-XDSL-INTERFACE-MIB
1.3.6.1.4.1.1795.2.24.9.2.5xdslDevIDSLSpecificIfConfigPDN-XDSL-INTERFACE-MIB
1.3.6.1.4.1.1795.2.24.9.2.5.1xdslDevIDSLSpecificIfConfigTablePDN-XDSL-INTERFACE-MIB
1.3.6.1.4.1.1795.2.24.9.2.5.1.1xdslDevIDSLSpecificIfConfigEntryPDN-XDSL-INTERFACE-MIB
1.3.6.1.4.1.1795.2.24.9.2.5.1.1.2xdslDevIDSLSpecificIfConfigTimingPortTransceiverModePDN-XDSL-INTERFACE-MIB