PACKETFRONT-DRG-MIB

All MIBs › PACKETFRONT-DRG-MIB

Organization: PacketFront Systems AB

Last Updated: 2009-03-23

Category: CPE/Router

Description: Manages PacketFront DRG (Digital Residential Gateway) CPE device configuration and subscriber service status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PACKETFRONT-DRG-MIB?

PACKETFRONT-DRG-MIB is a PacketFront Systems (broadband access/CPE vendor) proprietary MIB managing DRG (Distributed Residential Gateway) devices. Its objects cover product name/serial number/production week, software/firmware image revision and default revision, hardware/PCBA revision, platform, function identity, MAC address, and product identity, alongside system-config actions — restart (with notification), save (with notification), and factory reset — and firmware-download configuration (server, file, action, method, retry count, result code with notification). As a hardware/software-status and configuration MIB it lets an administrator confirm a DRG's firmware revision and trigger a remote firmware download. It is deployed on PacketFront Systems DRG residential gateway devices. Engineers can download the PACKETFRONT-DRG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PACKETFRONT-DRG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

PacketFront Systems DRG residential gateway devices

Monitoring Examples

An administrator triggers downloadAction to push a firmware update to a PacketFront DRG device, then checks downloadResultCode to confirm the download and installation completed successfully.

What Can Be Monitored

firmware revision
firmware download status

Imported Objects

From PACKETFRONT-SMI

pfMgmt

OBJECT-IDENTITY

From PACKETFRONT-TC

PortList

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus

How to Use in IPNetwork Monitor

Example using vlanFdbDynamicCount OID:

Select a PacketFront Systems DRG residential gateway device as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type vlanFdbDynamicCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The current number of dynamic entries in this Filtering Database. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT downloadAction	1.3.6.1.4.1.9303.4.3.1.3.3	INTEGER	read-write	When this object is set to startDownload(2), the system will attempt to connect to the server specified in downloadServer (or the host part of downloadFile if a URL has been specified there), using the method defined in downloadMethod. If the file is found and verified, it will be downloaded to the device and stored. When the download process is completed, the device will restart the newly loaded application. When the device is not downloading, this object will have a value of notDownloading(1).
downloadConfig	1.3.6.1.4.1.9303.4.3.1.3
OCT downloadFile	1.3.6.1.4.1.9303.4.3.1.3.2	OCTET STRING	read-write	The file name to be downloaded from the download server or a URL to be downloaded via http. This value is set to the zero length string when no file name has been specified.
INT downloadMethod	1.3.6.1.4.1.9303.4.3.1.3.4	INTEGER	read-write	Defines the method to be used for the file download. This may be a specific protocol, or auto(3) which will cycle through the available methods to find one which works.
INT downloadResultCode	1.3.6.1.4.1.9303.4.3.1.3.6	INTEGER	read-only	This object returns the status of the last download procedure. If no downloads have occurred, none(0) is returned, or if there is currently a download in progress, inProgress(1) is returned.
INT downloadResultNotify	1.3.6.1.4.1.9303.4.3.1.3.7	INTEGER	read-write	Setting the object to always(2) cause the system to send downloadResultCodeTrap after every download no matter the result. Setting the object to onlyErrors(3) cause the system to send downloadResultCodeTrap when an error occurs during the download. Setting the object to silent(1) cause the system to not send any downloadResultNotify notifications.
I32 downloadRetryCount	1.3.6.1.4.1.9303.4.3.1.3.5	Integer32	read-write	Controls the number of attempts which will be made to perform a download before terminating the download attempt.
OCT downloadServer	1.3.6.1.4.1.9303.4.3.1.3.1	OCTET STRING	read-write	The address of the server that contains the file to be loaded. This may take the form of an IP address or FQDN.
drgCompatibility	1.3.6.1.4.1.9303.4.3.2.3
drgCompliance	1.3.6.1.4.1.9303.4.3.2.2
drgConfig	1.3.6.1.4.1.9303.4.3.1
drgConformance	1.3.6.1.4.1.9303.4.3.2
drgGroups	1.3.6.1.4.1.9303.4.3.2.1
drgNotification	1.3.6.1.4.1.9303.4.3.0
hostConfig	1.3.6.1.4.1.9303.4.3.1.4
IP hostIfAddress	1.3.6.1.4.1.9303.4.3.1.4.3.1.4	IpAddress	read-create	The IP address for this interface entry.
IP hostIfDefaultRouter	1.3.6.1.4.1.9303.4.3.1.4.3.1.6	IpAddress	read-write	The default router for this interface entry.
I32 hostIfDefined	1.3.6.1.4.1.9303.4.3.1.4.2	Integer32	read-only	The current number of defined host interfaces, i.e. the number of entries in the hostIfTable.
OCT hostIfDhcpClientID	1.3.6.1.4.1.9303.4.3.1.4.3.1.10	OCTET STRING	read-write	Setting this object causes the system to use a proprietary client identifier to identify itself to the DHCP server. By default the productMacAddress value of the device is used. This object thus allows the definition of the DHCP option 61 value.
OCT hostIfDhcpVendorClassID	1.3.6.1.4.1.9303.4.3.1.4.3.1.11	OCTET STRING	read-write	Setting this object causes the system to use the defined value as the DHCP vendor identifier in communication with the DHCP server. By default the value used is of the form 'drg-$productName$-$productSwImageRev$'. This object thus allows the definition of the DHCP option 60 value.
I32 hostIfDiffservCodePoint	1.3.6.1.4.1.9303.4.3.1.4.3.1.12	Integer32	read-write	Defines the IP DSCP value used by default for this interface.
IP hostIfDnsServer1	1.3.6.1.4.1.9303.4.3.1.4.3.1.8	IpAddress	read-write	The primary DNS server for this interface entry.
IP hostIfDnsServer2	1.3.6.1.4.1.9303.4.3.1.4.3.1.9	IpAddress	read-write	The secondary DNS server for this interface entry.
OCT hostIfDomainName	1.3.6.1.4.1.9303.4.3.1.4.3.1.7	OCTET STRING	read-write	The name of the domain name. If the DHCP client is enabled this object reports the domain name from the DHCP negotiation.
hostIfEntry	1.3.6.1.4.1.9303.4.3.1.4.3.1		not-accessible	One row of the table.
OCT hostIfHostName	1.3.6.1.4.1.9303.4.3.1.4.3.1.3	OCTET STRING	read-write	The name of the host interface. If the DHCP client is enabled this object reports the host name from the DHCP negotiation.
I32 hostIfIndex	1.3.6.1.4.1.9303.4.3.1.4.3.1.1	Integer32	read-only	A unique index for this IP interface entry.
I32 hostIfMax	1.3.6.1.4.1.9303.4.3.1.4.1	Integer32	read-only	The maximum numbers of entries (and layer 3 interfaces) in the hostIfTable.
INT hostIfMode	1.3.6.1.4.1.9303.4.3.1.4.3.1.2	INTEGER	read-write	The operational mode of the interface, e.g. DHCP, PPPoE.
INT hostIfSecurePing	1.3.6.1.4.1.9303.4.3.1.4.3.1.15	INTEGER	read-write	Setting this object to enabled(1) causes the device to silently drop ICMP echo (ping) requests. This is a simple way to cloak the presence of a device from ping sweeps.
IP hostIfSubnetMask	1.3.6.1.4.1.9303.4.3.1.4.3.1.5	IpAddress	read-write	The subnet mask for this interface entry.
hostIfTable	1.3.6.1.4.1.9303.4.3.1.4.3		not-accessible	A table holding a list of interfaces.
I32 hostIfVlan	1.3.6.1.4.1.9303.4.3.1.4.3.1.13	Integer32	read-write	Values 1..4094 define the default IEEE802.1Q VLAN tag used by this interface. By convention, this is used as the management VLAN when VLANs are enabled on this interface. The value 0 disables the use of management VLANs on this interface.
I32 hostIfVlanPriority	1.3.6.1.4.1.9303.4.3.1.4.3.1.14	Integer32	read-write	Defines the default IEEE802.1p priority tag used by this interface. By convention, this is used as the management priority when VLANs are enabled on this interface.
NTF notifyConfigSaveResult	1.3.6.1.4.1.9303.4.3.0.3			When a save event occurs, the device sends this notification to inform the management system of the result.
NTF notifyDownloadResult	1.3.6.1.4.1.9303.4.3.0.2			When the device has downloaded a new firmware image or configuration file, the device sends this notification to inform the management system of the result.
NTF notifyRestart	1.3.6.1.4.1.9303.4.3.0.1			After booting the system sends this notification repeatedly with an increasing time delay until a valid management station reads or writes an object.
pfDrgMib	1.3.6.1.4.1.9303.4.3			The MIB module for managing Packetfront DRG devices
OCT productDefaultRevision	1.3.6.1.4.1.9303.4.3.1.1.6	OCTET STRING	read-only	The revision of the default configuration in the device. This describes the revision of information loaded during manufacture.
OCT productFunctionIdentity	1.3.6.1.4.1.9303.4.3.1.1.11	OCTET STRING	read-only	Describes the functionality offered by the device.
OCT productFwImageRev	1.3.6.1.4.1.9303.4.3.1.1.5	OCTET STRING	read-only	The revision of the firmware in the device. This describes the bootloader revision, e.g. cxc_132_4098-R3A18.
I32 productHardwarePCBARevision	1.3.6.1.4.1.9303.4.3.1.1.10	Integer32	read-only	PCBA revision - this is a coded value read from the PCBA hardware.
OCT productHardwareRev	1.3.6.1.4.1.9303.4.3.1.1.8	OCTET STRING	read-only	Manufacturing hardware information regarding the revision of the hardware.
OCT productIdentity	1.3.6.1.4.1.9303.4.3.1.1.13	OCTET STRING	read-only	This object provides a unique identity for the device. By default this will be the same as the productMacAddress, however, if a hostname has been defined or provided by a DHCP server, then this will be used instead. In the former case, therefore, the identity is guaranteed to be unique, while in the latter it is the operator's responsibility to ensure that the identity is unique.
productInfo	1.3.6.1.4.1.9303.4.3.1.1
MAC productMacAddress	1.3.6.1.4.1.9303.4.3.1.1.12	MacAddress	read-only	The device MAC address - this is used in various alert messages to uniquely identify the specific device. The MAC address used is the MAC of the management entity of the device
OCT productName	1.3.6.1.4.1.9303.4.3.1.1.1	OCTET STRING	read-only	The name of the product.
OCT productOpDefRev	1.3.6.1.4.1.9303.4.3.1.1.7	OCTET STRING	read-only	The revision of the operator default information (the .ini file). The syntax is operator specific.Operator default revision ( INI file ).
OCT productPlatform	1.3.6.1.4.1.9303.4.3.1.1.9	OCTET STRING	read-only	This provides a predefined string for each product family - this differs from productName in that this cannot be configured by the operator, therefore will be constant across all platforms of the same type irrespective of the operator-specific name for the platform. This is useful for network operators managing a heterogeneous mix of platforms from different service providers
OCT productProductionWeek	1.3.6.1.4.1.9303.4.3.1.1.3	OCTET STRING	read-only	The week and year in which this device was manufactured.
OCT productSerialNo	1.3.6.1.4.1.9303.4.3.1.1.2	OCTET STRING	read-only	The unique serial number programmed into the device in the factory.
OCT productSwImageRev	1.3.6.1.4.1.9303.4.3.1.1.4	OCTET STRING	read-only	The revision of the software in the device. This may be upgraded. E.g DMA0081-R2K123.
INT snmpAtomicSet	1.3.6.1.4.1.9303.4.3.1.7.8	INTEGER	read-write	Complex operations involving numerous set commands can cause problems due to the lack of atomic operation by the network management system. This object may be used to ensure that all required changes for this MIB are made in a single atomic operation. This can be achieved by setting this object to stage(2), then setting all required objects, and then setting this object to apply(3). The object value will return to idle(1) once the atomic set operation has been completed.
snmpConfig	1.3.6.1.4.1.9303.4.3.1.7
I32 snmpDiffservCodePoint	1.3.6.1.4.1.9303.4.3.1.7.7	Integer32	read-write	Defines the IP DSCP value used by the SNMP agent.
OCT snmpReadCommunityName	1.3.6.1.4.1.9303.4.3.1.7.4	OCTET STRING	read-write	The read community string for the device.
OCT snmpTrapCommunityName	1.3.6.1.4.1.9303.4.3.1.7.6	OCTET STRING	read-write	The notification community string for the device.
IP snmpTrapDestAddress	1.3.6.1.4.1.9303.4.3.1.7.3.1.3	IpAddress	read-create	This object contains the address of the trap destination.
I32 snmpTrapDestHostsDefined	1.3.6.1.4.1.9303.4.3.1.7.2	Integer32	read-only	Current number of configured trap destinations.
I32 snmpTrapDestHostsMax	1.3.6.1.4.1.9303.4.3.1.7.1	Integer32	read-only	The maximum number of trap hosts which may be defined
snmpTrapDestinationEntry	1.3.6.1.4.1.9303.4.3.1.7.3.1		not-accessible	A transport address to be used in the generation of SNMP operations. Entries in the trapDestinationTable are created and deleted using the snmpTrapDestRowStatus object.
snmpTrapDestinationTable	1.3.6.1.4.1.9303.4.3.1.7.3		not-accessible	A table of transport addresses to be used in the generation of SNMP messages.
I32 snmpTrapDestIndex	1.3.6.1.4.1.9303.4.3.1.7.3.1.1	Integer32	read-create	The locally arbitrary, but unique identifier associated with this trapDestinationEntry.
OCT snmpTrapDestName	1.3.6.1.4.1.9303.4.3.1.7.3.1.2	OCTET STRING	read-create	This object contains a human readable name for the trap destination.
ROW snmpTrapDestRowStatus	1.3.6.1.4.1.9303.4.3.1.7.3.1.5	RowStatus	read-create	The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the trapDestRowStatus column is 'notReady'.
OCT snmpTrapDestTagList	1.3.6.1.4.1.9303.4.3.1.7.3.1.4	OCTET STRING	read-create	This object contains a list of tag values which are used to select target addresses for a particular operation.
OCT snmpWriteCommunityName	1.3.6.1.4.1.9303.4.3.1.7.5	OCTET STRING	read-write	The write community string for the device.
systemConfig	1.3.6.1.4.1.9303.4.3.1.2
INT systemConfigFactoryReset	1.3.6.1.4.1.9303.4.3.1.2.4	INTEGER	read-write	Setting this object to factoryReset(2) causes the device to return to its factory default settings, and reboot. This means that any operator or user configuration changes will be deleted, and the device will appear as if it has not previously been installed and configured. When read this object will return running(1) unless it is currently in the process of performing a factory reset.
INT systemConfigRestartControl	1.3.6.1.4.1.9303.4.3.1.2.1	INTEGER	read-write	Setting this object to restartNow(2) causes the device to reboot immediately. Note that this will cause any unsave configuration changes to be lost, therefore configuration changes should be saved before using this value if the changes are required. The device returns running(1) in all other cases.
INT systemConfigRestartControlNotify	1.3.6.1.4.1.9303.4.3.1.2.2	INTEGER	read-write	This object controls the operation of the notifyRestart alert. The notifyRestart is sent repeatedly when the object is equal to notifying(2). The notifyRestart is not sent when the object is equal to silent(1).
INT systemConfigSave	1.3.6.1.4.1.9303.4.3.1.2.3	INTEGER	read-write	Setting the object to save(1) causes the running configuration to be saved. The object responds with changed(2) if the running configuration differs from the initial configuration. The object responds with notChanged(3) if no configuration changes have occurred since the last save or boot.
INT systemConfigSaveNotify	1.3.6.1.4.1.9303.4.3.1.2.5	INTEGER	read-write	Setting this object to always(2) will cause the device to send a notifyConfigSaveResult alert each time the configuration is saved. Setting this object to onlyErrors(3) will cause the device to send a notifyConfigSaveResult if an error occurs during a configuration save procedure. Setting this object to silent(1) causes the device to not send notifyConfigSaveResult alerts.
vlanBase	1.3.6.1.4.1.9303.4.3.1.8.1
vlanConfig	1.3.6.1.4.1.9303.4.3.1.8
C32 vlanFdbDynamicCountEx	1.3.6.1.4.1.9303.4.3.1.8.2.1.1.2	Counter32	read-only	The current number of dynamic entries in this Filtering Database.
vlanFdbEntry	1.3.6.1.4.1.9303.4.3.1.8.2.1.1		not-accessible	Information about a specific Filtering Database.
U32 vlanFdbId	1.3.6.1.4.1.9303.4.3.1.8.2.1.1.1	Unsigned32	not-accessible	The identity of this Filtering Database.
vlanFdbTable	1.3.6.1.4.1.9303.4.3.1.8.2.1		not-accessible	A table that contains configuration and control information for each Filtering Database currently operating on this device. Entries in this table appear automatically when VLANs are assigned FDB IDs in the vlanVlanCurrentTable.
U32 vlanMaxSupportedVlans	1.3.6.1.4.1.9303.4.3.1.8.1.3	Unsigned32	read-only	The maximum number of IEEE802.1Q VLANs that this device supports.
I32 vlanMaxVlanId	1.3.6.1.4.1.9303.4.3.1.8.1.2	Integer32	read-only	The maximum IEEE802.1Q VLAN ID that this device supports.
U32 vlanNumVlans	1.3.6.1.4.1.9303.4.3.1.8.1.4	Unsigned32	read-only	The current number of IEEE802.1Q VLANs that are configured in this device.
vlanStatic	1.3.6.1.4.1.9303.4.3.1.8.3
POR vlanStaticEgressPorts	1.3.6.1.4.1.9303.4.3.1.8.3.1.1.5	PortList	read-write	The set of ports which are permanently assigned to the egress list for this VLAN by management. The default value of this object is a string of zeros of appropriate length, indicating not fixed.
vlanStaticEntry	1.3.6.1.4.1.9303.4.3.1.8.3.1.1		not-accessible	Static information for a VLAN configured in the device.
I32 vlanStaticIndex	1.3.6.1.4.1.9303.4.3.1.8.3.1.1.1	Integer32	read-create	The locally arbitrary, but unique identifier associated with this vlanStaticEntry.
OCT vlanStaticName	1.3.6.1.4.1.9303.4.3.1.8.3.1.1.2	OCTET STRING	read-write	An administratively assigned string, which may be used to identify the VLAN
I32 vlanStaticPriority	1.3.6.1.4.1.9303.4.3.1.8.3.1.1.4	Integer32	read-write	The IEEE802.1p priority value associated with this VLAN entry - this information may be used for policing priority where supported
ROW vlanStaticRowStatus	1.3.6.1.4.1.9303.4.3.1.8.3.1.1.8	RowStatus	read-create	This object indicates the status of this entry.
vlanStaticTable	1.3.6.1.4.1.9303.4.3.1.8.3.1		not-accessible	A table containing static configuration information for each VLAN configured on the device. All entries are permanent and will be restored after the device is reset.
POR vlanStaticUnmodifiedPorts	1.3.6.1.4.1.9303.4.3.1.8.3.1.1.7	PortList	read-write	Describes the set of ports which should transmit egress packets for this VLAN unmodified. If a device agent cannot support the set of ports being set then it will reject the set operation with an error. Note that if this behaviour is supported and the bit is set for a port, the value of the same bit in vlanStaticUntaggedPorts is ignored.
POR vlanStaticUntaggedPorts	1.3.6.1.4.1.9303.4.3.1.8.3.1.1.6	PortList	read-write	Describes the set of ports which should transmit egress packets for this VLAN untagged. If a device agent cannot support the set of ports being set then it will reject the set operation with an error. An example might be if a manager attempts to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
I32 vlanStaticVlanId	1.3.6.1.4.1.9303.4.3.1.8.3.1.1.3	Integer32	read-write	The VLAN identifier associated with this VLAN entry
vlanTp	1.3.6.1.4.1.9303.4.3.1.8.2
MAC vlanTpFdbAddress	1.3.6.1.4.1.9303.4.3.1.8.2.2.1.1	MacAddress	not-accessible	A unicast MAC address for which the device has forwarding and/or filtering information.
vlanTpFdbEntry	1.3.6.1.4.1.9303.4.3.1.8.2.2.1		not-accessible	Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information.
I32 vlanTpFdbPort	1.3.6.1.4.1.9303.4.3.1.8.2.2.1.2	Integer32	read-only	Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of vlanTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the device does have some forwarding/filtering information about this address (e.g. in the vlanStaticUnicastTable). Implementors are encouraged to assign the port value to this object whenever it is learned even for addresses for which the corresponding value of vlanTpFdbStatus is not learned(3).
INT vlanTpFdbStatus	1.3.6.1.4.1.9303.4.3.1.8.2.2.1.3	INTEGER	read-only	The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of vlanTpFdbPort, nor an entry in the vlanStaticUnicastTable) is being used to determine if and how frames addressed to the value of the corresponding instance of vlanTpFdbAddress are being forwarded. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. learned(3) - the value of the corresponding instance of vlanTpFdbPort was learned and is being used. self(4) - the value of the corresponding instance of vlanTpFdbAddress represents one of the device's addresses. The corresponding instance of vlanTpFdbPort indicates which of the device's ports has this address. mgmt(5) - the value of the corresponding instance of vlanTpFdbAddress is also the value of an existing instance of vlanStaticAddress.
vlanTpFdbTable	1.3.6.1.4.1.9303.4.3.1.8.2.2		not-accessible	A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
INT vlanVersionNumber	1.3.6.1.4.1.9303.4.3.1.8.1.1	INTEGER	read-only	The version number of IEEE802.1Q that this device supports.

RFC description

Management of PacketFront DRG (Distributed Routing Gateway) devices including product information and device configuration.

Start monitoring PacketFront Systems DRG residential gateway devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PACKETFRONT-DRG-MIB