All MIBs › OMNI-gx2oa100bd-MIB › gx2OA100BDHoldTimeData
gx2OA100BDHoldTimeData
Module: OMNI-gx2oa100bd-MIB
OID (symbolic): OMNI-gx2oa100bd-MIB::gx2OA100BDHoldTimeData
OID (numeric): 1.3.6.1.4.1.1166.6.1.2.17.6.5.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value of this object provides access to the hold timers used to suppress nose on analog objects. This object is a 32 bit object. Validation data is entered into bytes zero and one of the object. Bytes three and four are used to entering the hold time for the specified alarm object. The Hold timer data ranges from 0 to 1300 seconds. The index of this object corresponds to the alarm object to be modified. Alarm Hold timers correspond to the index of this object as follows: Index 1 = xxx, index 2 = xxxx, Index 3 = xxxx, The hold time is represented in seconds.
What is gx2OA100BDHoldTimeData?
Read-write hold-timer value, 0 to 1300 seconds, used to suppress alarm 'noise' (brief, non-persistent excursions) on the analog objects identified by gx2OA100BDHoldTimeSpecIndex; an operator raises this from its default to stop a borderline reading from generating repeated flapping alarms.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.17.6.5.3 snmpwalk -v2c -c public <target> OMNI-gx2oa100bd-MIB::gx2OA100BDHoldTimeData
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.17.6.5.3.1 snmpget -v2c -c public <target> OMNI-gx2oa100bd-MIB::gx2OA100BDHoldTimeData.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.6.1.2.17.6.5.3.1 i <value>
Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (GX2 OA100BD optical attenuator module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OMNI-gx2oa100bd-MIB::gx2OA100BDHoldTimeData OID value, configure state conditions and alerts, and monitor any General Instrument OmniStar GX2 HFC headend/optical node (GX2 OA100BD optical attenuator module) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.6 | motproxies | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.6.1 | hfc | GX2HFC-MIB |
| 1.3.6.1.4.1.1166.6.1.2 | hfcDevices | GX2HFC-MIB |
| 1.3.6.1.4.1.1166.6.1.2.17 | gx2OA100BD | GX2HFC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.6.1.2.17.6 | gx2OA100BDHoldTimeTable | OMNI-gx2oa100bd-MIB |
| 1.3.6.1.4.1.1166.6.1.2.17.6.5 | gx2OA100BDHoldTimeEntry | OMNI-gx2oa100bd-MIB |
| 1.3.6.1.4.1.1166.6.1.2.17.6.5.3 | gx2OA100BDHoldTimeData | OMNI-gx2oa100bd-MIB |