All MIBs › OMNI-gx2Rx200BX4-MIB › rx4valueSwModeThresholdThree
rx4valueSwModeThresholdThree
Module: OMNI-gx2Rx200BX4-MIB
OID (symbolic): OMNI-gx2Rx200BX4-MIB::rx4valueSwModeThresholdThree
OID (numeric): 1.3.6.1.4.1.1166.6.1.2.29.3.2.60
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value of this object reflects the setting of the threshold at which the Optical Input Failed signal is sent. It is in 1 dB increments ranging from -2 to -17 dB. The user can enter a number from 0 to 15, where 0 = -2db and 15= -17db
What is rx4valueSwModeThresholdThree?
Sets the optical-level threshold for lane 3, as an integer from 0 to 15 in 1 dB steps (0 = -2 dBm, 15 = -17 dBm), below which the module declares an Optical Input Failed condition and, depending on rx4valueSwModeSettingSwModeThresholdThree, triggers the protection switch; raising the raw value moves the trip point to a lower (more negative) power level, tolerating a weaker signal before declaring failure.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.29.3.2.60 snmpwalk -v2c -c public <target> OMNI-gx2Rx200BX4-MIB::rx4valueSwModeThresholdThree
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.29.3.2.60.1 snmpget -v2c -c public <target> OMNI-gx2Rx200BX4-MIB::rx4valueSwModeThresholdThree.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.6.1.2.29.3.2.60.1 i <value>
Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (GX2 RX200BX4 200 MHz quad-port optical receiver card) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OMNI-gx2Rx200BX4-MIB::rx4valueSwModeThresholdThree OID value, configure state conditions and alerts, and monitor any General Instrument OmniStar GX2 HFC headend/optical node (GX2 RX200BX4 200 MHz quad-port optical receiver card) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.6 | motproxies | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.6.1 | hfc | GX2HFC-MIB |
| 1.3.6.1.4.1.1166.6.1.2 | hfcDevices | GX2HFC-MIB |
| 1.3.6.1.4.1.1166.6.1.2.29 | gx2Rx200BX4 | GX2HFC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.6.1.2.29.3 | gx2Rx200BX4DigitalTable | OMNI-gx2Rx200BX4-MIB |
| 1.3.6.1.4.1.1166.6.1.2.29.3.2 | gx2Rx200BX4DigitalEntry | OMNI-gx2Rx200BX4-MIB |
| 1.3.6.1.4.1.1166.6.1.2.29.3.2.60 | rx4valueSwModeThresholdThree | OMNI-gx2Rx200BX4-MIB |