OMNI-gx2RX1000-MIB :: fprbank0CRC

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › OMNI-gx2RX1000-MIB › fprbank0CRC

fprbank0CRC

Module: OMNI-gx2RX1000-MIB

OID (symbolic): OMNI-gx2RX1000-MIB::fprbank0CRC

OID (numeric): 1.3.6.1.4.1.1166.6.1.2.9.5.4.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object provides the CRC code of bank 0.

What is fprbank0CRC?

Read-only INTEGER giving the checksum (CRC) of the firmware image stored in bank 0, used to verify that bank's image is intact before booting from it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.9.5.4.4
snmpwalk -v2c -c public <target> OMNI-gx2RX1000-MIB::fprbank0CRC

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.9.5.4.4.1
snmpget -v2c -c public <target> OMNI-gx2RX1000-MIB::fprbank0CRC.1

Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (GX2 RX1000 1000 MHz optical receiver card) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OMNI-gx2RX1000-MIB::fprbank0CRC OID value, configure state conditions and alerts, and monitor any General Instrument OmniStar GX2 HFC headend/optical node (GX2 RX1000 1000 MHz optical receiver card) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1166giBCS-IDENT-MIB
1.3.6.1.4.1.1166.6motproxiesBCS-IDENT-MIB
1.3.6.1.4.1.1166.6.1hfcGX2HFC-MIB
1.3.6.1.4.1.1166.6.1.2hfcDevicesGX2HFC-MIB
1.3.6.1.4.1.1166.6.1.2.9gx2Rx1000GX2HFC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1166.6.1.2.9.5gx2Rx1000FactoryTableOMNI-gx2RX1000-MIB
1.3.6.1.4.1.1166.6.1.2.9.5.4gx2Rx1000FactoryEntryOMNI-gx2RX1000-MIB
1.3.6.1.4.1.1166.6.1.2.9.5.4.4fprbank0CRCOMNI-gx2RX1000-MIB

Module

This MIB depends on