All MIBs › OMNI-gx2LME-MIB › gx2Lm1000EHoldTimeData
gx2Lm1000EHoldTimeData
Module: OMNI-gx2LME-MIB
OID (symbolic): OMNI-gx2LME-MIB::gx2Lm1000EHoldTimeData
OID (numeric): 1.3.6.1.4.1.1166.6.1.2.27.6.5.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value of this object provides access to the hold timers used to suppress nose on analog objects. This object is a 32 bit object. Validation data is entered into bytes zero and one of the object. Bytes three and four are used to entering the hold time for the specified alarm object. The Hold timer data ranges from 0 to 1300 seconds. The index of this object corresponds to the alarm object to be modified. Alarm Hold timers correspond to the index of this object as follows: Index 1 = xxx, index 2 = xxxx, Index 3 = xxxx, The hold time is represented in seconds.
What is gx2Lm1000EHoldTimeData?
Holds the alarm hold/suppression timer, in seconds (0-1300), for the analog alarm object identified by gx2Lm1000EHoldTimeSpecIndex, packed into a 32-bit value. An admin raises this hold time on a noisy analog parameter (e.g. optical power fluctuating near a threshold) so brief excursions don't immediately trigger an alarm, only sustained ones.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.27.6.5.3 snmpwalk -v2c -c public <target> OMNI-gx2LME-MIB::gx2Lm1000EHoldTimeData
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.27.6.5.3.1 snmpget -v2c -c public <target> OMNI-gx2LME-MIB::gx2Lm1000EHoldTimeData.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.6.1.2.27.6.5.3.1 i <value>
Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (GX2 LME laser module enhanced transmitter) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OMNI-gx2LME-MIB::gx2Lm1000EHoldTimeData OID value, configure state conditions and alerts, and monitor any General Instrument OmniStar GX2 HFC headend/optical node (GX2 LME laser module enhanced transmitter) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.6 | motproxies | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.6.1 | hfc | GX2HFC-MIB |
| 1.3.6.1.4.1.1166.6.1.2 | hfcDevices | GX2HFC-MIB |
| 1.3.6.1.4.1.1166.6.1.2.27 | gx2LmE | GX2HFC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.6.1.2.27.6 | gx2Lm1000EHoldTimeTable | OMNI-gx2LME-MIB |
| 1.3.6.1.4.1.1166.6.1.2.27.6.5 | gx2Lm1000EHoldTimeEntry | OMNI-gx2LME-MIB |
| 1.3.6.1.4.1.1166.6.1.2.27.6.5.3 | gx2Lm1000EHoldTimeData | OMNI-gx2LME-MIB |