All MIBs › OMNI-gx2CM-MIB › valueISDNBackoffTimer
valueISDNBackoffTimer
Module: OMNI-gx2CM-MIB
OID (symbolic): OMNI-gx2CM-MIB::valueISDNBackoffTimer
OID (numeric): 1.3.6.1.4.1.1166.6.1.2.3.3.2.35
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object provides the value for the ISDN backoff timer. The value in this object is a hold period used to prevent traps from being sent. It is used to allow other chassis to have time to connect and communicate over the ISDN modems. This hold period starts after the valueISDNTrapTimeout period has expired. NOTE: The value of this object should be set to a value greater than the ISDN Modem's idle connection timeout period. This will allow the Modem to break the ISDN Connection. Factory default value is 2 min (120 sec). User should set this value in seconds
What is valueISDNBackoffTimer?
A hold-off period, in seconds (0-3600), after valueISDNTrapTimeout expires during which no new ISDN trap session starts, giving other chassis time to connect over the same ISDN modems; factory default is 120 seconds. The vendor recommends setting this longer than the ISDN modem's own idle-connection timeout so the modem actually hangs up before the next attempt.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.3.3.2.35 snmpwalk -v2c -c public <target> OMNI-gx2CM-MIB::valueISDNBackoffTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.3.3.2.35.1 snmpget -v2c -c public <target> OMNI-gx2CM-MIB::valueISDNBackoffTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.6.1.2.3.3.2.35.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> valueISDNBackoffTimer.1
Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (gx2CM combiner module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OMNI-gx2CM-MIB::valueISDNBackoffTimer OID value, configure state conditions and alerts, and monitor any General Instrument OmniStar GX2 HFC headend/optical node (gx2CM combiner module) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.6 | motproxies | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.6.1 | hfc | GX2HFC-MIB |
| 1.3.6.1.4.1.1166.6.1.2 | hfcDevices | GX2HFC-MIB |
| 1.3.6.1.4.1.1166.6.1.2.3 | gx2Cm | GX2HFC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.6.1.2.3.3 | gx2cmNetworkTable | OMNI-gx2CM-MIB |
| 1.3.6.1.4.1.1166.6.1.2.3.3.2 | gx2cmNetworkEntry | OMNI-gx2CM-MIB |
| 1.3.6.1.4.1.1166.6.1.2.3.3.2.35 | valueISDNBackoffTimer | OMNI-gx2CM-MIB |