Nortel-MsCarrier-MscPassport-DisdnTS014MIB

All MIBs › Nortel-MsCarrier-MscPassport-DisdnTS014MIB

Category: ISDN, Nortel MsCarrier MscPassport

Description: Defines SNMP objects for Australian TS014-variant Digital ISDN interface signaling on Nortel MsCarrier MscPassport switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Nortel-MsCarrier-MscPassport-DisdnTS014MIB?

This MIB manages the Australian TS014 variant of digital ISDN signaling channels on Nortel's MsCarrier MscPassport WAN switching platform (Passport 15000/20000 series). It defines a row-status-controlled table for creating and managing TS014 signaling channel components, along with a Layer-2 configuration table exposing ISDN Q.921-style timer and counter parameters (T200, N200) and framer settings. Monitoring-wise, this MIB is primarily about configuration and operational status of ISDN signaling links - confirming a signaling channel component is active (row status), verifying Layer-2 timer/retry settings are correctly provisioned, and checking framer state - which reflects the software/protocol health of the ISDN link rather than physical sensors. It depends on Nortel's broader MscPassport component/row-status conventions and on general ISDN/Q.921 Layer-2 protocol standards, adapted for the Australian TS014 ISDN variant. It is typically deployed in telecom carrier networks using Nortel Passport WAN switches to provide TS014 ISDN PRI/BRI signaling for the Australian market. Engineers can download the Nortel-MsCarrier-MscPassport-DisdnTS014MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-MsCarrier-MscPassport-DisdnTS014MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nortel MsCarrier MscPassport WAN switch (Passport 15000/20000 series)

Monitoring Examples

Checking mscDataSigChanTS014RowStatus for an entry in mscDataSigChanTS014RowStatusTable confirms whether a given TS014 signaling channel component is active, not-in-service, or being provisioned. The mscDataSigChanTS014L2Table exposes mscDataSigChanTS014T200 and mscDataSigChanTS014N200, the Layer-2 retransmission timer and retry-count, letting an engineer verify these match the carrier's TS014 specification to avoid signaling link flaps. mscDataSigChanTS014Framer indicates the framer configuration/status for the underlying digital channel.

What Can Be Monitored

signaling channel component row status
Layer-2 timer T200
Layer-2 retry count N200
framer configuration/status

Imported Objects

From Nortel-MsCarrier-MscPassport-DataIsdnMIB

mscDataSigChan	OBJECT-IDENTITY
mscDataSigChanIndex	OBJECT-TYPE

From Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB

DisplayString
RowStatus
StorageType
Unsigned32

From Nortel-MsCarrier-MscPassport-TextualConventionsMIB

Link
NonReplicated

From Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB

mscPassportMIBs

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
mscDataSigChanTS014	1.3.6.1.4.1.562.36.2.1.120.9
mscDataSigChanTS014RowStatusTable	1.3.6.1.4.1.562.36.2.1.120.9.1		not-accessible	This entry controls the addition and deletion of mscDataSigChanTS014 components.
mscDataSigChanTS014RowStatusEntry	1.3.6.1.4.1.562.36.2.1.120.9.1.1		not-accessible	A single entry in the table represents a single mscDataSigChanTS014 component.
ROW mscDataSigChanTS014RowStatus	1.3.6.1.4.1.562.36.2.1.120.9.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of mscDataSigChanTS014 components. These components can be added and deleted.
STR mscDataSigChanTS014ComponentName	1.3.6.1.4.1.562.36.2.1.120.9.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscDataSigChanTS014StorageType	1.3.6.1.4.1.562.36.2.1.120.9.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscDataSigChanTS014 tables.
NON mscDataSigChanTS014Index	1.3.6.1.4.1.562.36.2.1.120.9.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscDataSigChanTS014 tables.
mscDataSigChanTS014Framer	1.3.6.1.4.1.562.36.2.1.120.9.2
mscDataSigChanTS014FramerRowStatusTable	1.3.6.1.4.1.562.36.2.1.120.9.2.1		not-accessible	This entry controls the addition and deletion of mscDataSigChanTS014Framer components.
mscDataSigChanTS014FramerRowStatusEntry	1.3.6.1.4.1.562.36.2.1.120.9.2.1.1		not-accessible	A single entry in the table represents a single mscDataSigChanTS014Framer component.
ROW mscDataSigChanTS014FramerRowStatus	1.3.6.1.4.1.562.36.2.1.120.9.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of mscDataSigChanTS014Framer components. These components cannot be added nor deleted.
STR mscDataSigChanTS014FramerComponentName	1.3.6.1.4.1.562.36.2.1.120.9.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO mscDataSigChanTS014FramerStorageType	1.3.6.1.4.1.562.36.2.1.120.9.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the mscDataSigChanTS014Framer tables.
NON mscDataSigChanTS014FramerIndex	1.3.6.1.4.1.562.36.2.1.120.9.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the mscDataSigChanTS014Framer tables.
mscDataSigChanTS014FramerProvTable	1.3.6.1.4.1.562.36.2.1.120.9.2.10		not-accessible	This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
mscDataSigChanTS014FramerProvEntry	1.3.6.1.4.1.562.36.2.1.120.9.2.10.1		not-accessible	An entry in the mscDataSigChanTS014FramerProvTable.
LIN mscDataSigChanTS014FramerInterfaceName	1.3.6.1.4.1.562.36.2.1.120.9.2.10.1.1	Link	read-write	This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
mscDataSigChanTS014FramerStateTable	1.3.6.1.4.1.562.36.2.1.120.9.2.12		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
mscDataSigChanTS014FramerStateEntry	1.3.6.1.4.1.562.36.2.1.120.9.2.12.1		not-accessible	An entry in the mscDataSigChanTS014FramerStateTable.
INT mscDataSigChanTS014FramerAdminState	1.3.6.1.4.1.562.36.2.1.120.9.2.12.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT mscDataSigChanTS014FramerOperationalState	1.3.6.1.4.1.562.36.2.1.120.9.2.12.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT mscDataSigChanTS014FramerUsageState	1.3.6.1.4.1.562.36.2.1.120.9.2.12.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
mscDataSigChanTS014FramerStatsTable	1.3.6.1.4.1.562.36.2.1.120.9.2.13		not-accessible	This group contains the operational statistics data for a Framer component.
mscDataSigChanTS014FramerStatsEntry	1.3.6.1.4.1.562.36.2.1.120.9.2.13.1		not-accessible	An entry in the mscDataSigChanTS014FramerStatsTable.
U32 mscDataSigChanTS014FramerFrmToIf	1.3.6.1.4.1.562.36.2.1.120.9.2.13.1.1	Unsigned32	read-only	This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value.
U32 mscDataSigChanTS014FramerFrmFromIf	1.3.6.1.4.1.562.36.2.1.120.9.2.13.1.2	Unsigned32	read-only	This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value.
U32 mscDataSigChanTS014FramerOctetFromIf	1.3.6.1.4.1.562.36.2.1.120.9.2.13.1.3	Unsigned32	read-only	The number of bytes received from the link interface by Framer.
U32 mscDataSigChanTS014FramerAborts	1.3.6.1.4.1.562.36.2.1.120.9.2.13.1.4	Unsigned32	read-only	This attribute counts the total number of aborts received. This count wraps to zero after reaching its maximum value.
U32 mscDataSigChanTS014FramerCrcErrors	1.3.6.1.4.1.562.36.2.1.120.9.2.13.1.5	Unsigned32	read-only	This attribute counts the total number of frames with CRC errors. This count wraps to zero after reaching its maximum value.
U32 mscDataSigChanTS014FramerLrcErrors	1.3.6.1.4.1.562.36.2.1.120.9.2.13.1.6	Unsigned32	read-only	This attribute counts the total number of frames with LRC errors. This count wraps to zero after reaching its maximum value.
U32 mscDataSigChanTS014FramerNonOctetErrors	1.3.6.1.4.1.562.36.2.1.120.9.2.13.1.7	Unsigned32	read-only	This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after reaching its maximum value.
U32 mscDataSigChanTS014FramerOverruns	1.3.6.1.4.1.562.36.2.1.120.9.2.13.1.8	Unsigned32	read-only	This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after reaching its maximum value.
U32 mscDataSigChanTS014FramerUnderruns	1.3.6.1.4.1.562.36.2.1.120.9.2.13.1.9	Unsigned32	read-only	This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after reaching its maximum value.
U32 mscDataSigChanTS014FramerLargeFrmErrors	1.3.6.1.4.1.562.36.2.1.120.9.2.13.1.10	Unsigned32	read-only	This attribute counts the total number of frames received which were too large. The frame was longer than 500 bytes. This count wraps to zero after reaching its maximum value.
mscDataSigChanTS014L2Table	1.3.6.1.4.1.562.36.2.1.120.9.11		not-accessible	This group represents the provisionable Layer 2 attributes of the Q931 CCITT protocol.
mscDataSigChanTS014L2Entry	1.3.6.1.4.1.562.36.2.1.120.9.11.1		not-accessible	An entry in the mscDataSigChanTS014L2Table.
U32 mscDataSigChanTS014T23	1.3.6.1.4.1.562.36.2.1.120.9.11.1.1	Unsigned32	read-write	This attribute specifies the layer2 enable request timer.
U32 mscDataSigChanTS014T200	1.3.6.1.4.1.562.36.2.1.120.9.11.1.2	Unsigned32	read-write	This attribute specifies the maximum time between a layer 2 frame and its acknowledgement
U32 mscDataSigChanTS014N200	1.3.6.1.4.1.562.36.2.1.120.9.11.1.3	Unsigned32	read-write	This attribute specifies the maximum number of re-transmissions of a layer2 frame.
U32 mscDataSigChanTS014T203	1.3.6.1.4.1.562.36.2.1.120.9.11.1.4	Unsigned32	read-write	This attribute specifies the maximum time that a no layer 2 traffic situation can last. Expiry triggers a check on whether the far end is a live.
U32 mscDataSigChanTS014N201	1.3.6.1.4.1.562.36.2.1.120.9.11.1.5	Unsigned32	read-write	This attribute specifies the maximum number of octets in an information field.
U32 mscDataSigChanTS014CircuitSwitchedK	1.3.6.1.4.1.562.36.2.1.120.9.11.1.6	Unsigned32	read-write	This attribute specifies the maximum number of frames for B channel use.
mscDataSigChanTS014ProvTable	1.3.6.1.4.1.562.36.2.1.120.9.13		not-accessible	This group defines the general options of the d-channel signalling link.
mscDataSigChanTS014ProvEntry	1.3.6.1.4.1.562.36.2.1.120.9.13.1		not-accessible	An entry in the mscDataSigChanTS014ProvTable.
INT mscDataSigChanTS014Side	1.3.6.1.4.1.562.36.2.1.120.9.13.1.1	INTEGER	read-write	This attribute specifies whether the layer 2 HDLC interface is the network or user side of the connection.
mscDataSigChanTS014OperTable	1.3.6.1.4.1.562.36.2.1.120.9.15		not-accessible	This group provides the operational attributes for the signalling protocol.
mscDataSigChanTS014OperEntry	1.3.6.1.4.1.562.36.2.1.120.9.15.1		not-accessible	An entry in the mscDataSigChanTS014OperTable.
U32 mscDataSigChanTS014ActiveChannels	1.3.6.1.4.1.562.36.2.1.120.9.15.1.1	Unsigned32	read-only	This attribute indicates the number of currently active channels. This includes data and voice channels.
U32 mscDataSigChanTS014PeakActiveChannels	1.3.6.1.4.1.562.36.2.1.120.9.15.1.4	Unsigned32	read-only	This attribute indicates the maximum number of channels that have been active on this signalling channel during the last polling period.
INT mscDataSigChanTS014DChanStatus	1.3.6.1.4.1.562.36.2.1.120.9.15.1.7	INTEGER	read-only	This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that the signalling channel is attempting to stage the layer 2. established means that the layer 2 is enabled. If the signalling channel stays in the established state, then it is waiting for a restart from the PBX. enabling means that the resources for processing calls are being initialized. If the signalling channel stays in the enabling state then it is waiting for a restart acknowledgement from the PBX. inService means that the resources for processing calls are available. restarting means that the resources for call processing are being rei- initialized.
mscDataSigChanTS014ToolsTable	1.3.6.1.4.1.562.36.2.1.120.9.16		not-accessible	This group contains a series of operational attributes which turn on and off several kinds of tracing.
mscDataSigChanTS014ToolsEntry	1.3.6.1.4.1.562.36.2.1.120.9.16.1		not-accessible	An entry in the mscDataSigChanTS014ToolsTable.
OCT mscDataSigChanTS014Tracing	1.3.6.1.4.1.562.36.2.1.120.9.16.1.1	OCTET STRING	read-write	This attribute defines which types of tracing are active for this signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueue attribute in Col/debug must be greater than 0 and a Telnet NMIS session must list the debug stream in in its data streams (ex. set nmis telnet session/1 dataStreams debug). Different types of tracing can be enabled simultaneously. Note that tracing consumes additional CPU resources and will slow down call processing on a heavily loaded card. If there is message block exhaustion tracing will be suspended for a period and then automatically reenabled. An alarm is generated on tracing suspension and resumption. This mechanism protects the function processor against excessive numbers of tracing messages. Types of tracing include: protocolErrors - get details of any protocol errors which are occuring. Protocol errors are also reported in summary form as alarms. q931Summary - Summary of the Q.931 messages on the signalling link, including certain call details (calling number, called number, release codes). q931Hex - Q.931 messages displayed in hex format. Useful to determine protocol compliance in case of errors reported on local or remote ends. q931Symbolic - Q.931 messages parsed to give maximum detail. Useful for understanding content of messages flowing on the link. portHex - Messages in hex format being sent and received on the link. Description of bits: protocolErrors(0) q931Summary(1) q931Hex(2) q931Symbolic(3) portHex(4)
disdnTS014MIB	1.3.6.1.4.1.562.36.2.2.114
disdnTS014Group	1.3.6.1.4.1.562.36.2.2.114.1
disdnTS014GroupCA	1.3.6.1.4.1.562.36.2.2.114.1.1
disdnTS014GroupCA02	1.3.6.1.4.1.562.36.2.2.114.1.1.3
disdnTS014GroupCA02A	1.3.6.1.4.1.562.36.2.2.114.1.1.3.2
disdnTS014Capabilities	1.3.6.1.4.1.562.36.2.2.114.3
disdnTS014CapabilitiesCA	1.3.6.1.4.1.562.36.2.2.114.3.1
disdnTS014CapabilitiesCA02	1.3.6.1.4.1.562.36.2.2.114.3.1.3
disdnTS014CapabilitiesCA02A	1.3.6.1.4.1.562.36.2.2.114.3.1.3.2

RFC description

Nortel Passport DISDNTS014 (Digital Subscriber Line/ISDN) management MIB for monitoring and controlling DSL/ISDN line characteristics and performance.

Start monitoring Nortel MsCarrier MscPassport WAN switch, Passport 15000/20000 series (Australian TS014 ISDN) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Nortel-MsCarrier-MscPassport-DisdnTS014MIB

What Is Nortel-MsCarrier-MscPassport-DisdnTS014MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description