Nortel-Magellan-Passport-FileSystemMIB

All MIBs › Nortel-Magellan-Passport-FileSystemMIB

Category: Hardware Inventory

Description: Manages Nortel Magellan Passport file system storage, partition management, and file transfer operations.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Nortel-Magellan-Passport-FileSystemMIB?

This MIB is part of the Nortel Magellan Passport multiservice switch family and manages the onboard file system - storage partitions, disks, and file transfer operations used to hold software images, logs, and configuration data. It exposes fsStateTable, which carries the administrative, operational, and usage state of file-system components such as disks (fsDisk), alongside fsRowStatusTable for creating or removing file-system component instances. This is directly a hardware/software status MIB: it lets operators see whether a disk or partition is in service, disabled, or nearing capacity, which is essential for catching storage exhaustion or a failing disk before it blocks software loads or log writes. It builds on the core Passport component/RowStatus conventions shared across the Magellan Passport MIB suite. It is deployed on Passport processor/disk cards, where Nortel-Magellan-Passport-FileSystemMIB SNMP monitoring tracks local storage health during normal operation and software maintenance windows.

IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-Magellan-Passport-FileSystemMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nortel Magellan Passport multiservice switch
Passport processor/disk card

Monitoring Examples

An operator polls fsStateTable/fsStateEntry for a disk component identified via fsComponentName to read fsAdminState, fsOperationalState, and fsUsageState, showing whether a partition (fsDisk) is in service and how full it is. fsRowStatusTable controls creation of file-system partitions, with fsStorageType indicating permanence. An fsOperationalState of disabled, or fsUsageState reporting busy/full on a critical partition, signals storage exhaustion or a failing disk that could block software loads.

What Can Be Monitored

disk/partition admin state
disk/partition operational state
disk usage state (full/busy)
file system component row status
storage type

Imported Objects

From Nortel-Magellan-Passport-StandardTextualConventionsMIB

DisplayString
Gauge32
Integer32
RowPointer
RowStatus
StorageType
Unsigned32

From Nortel-Magellan-Passport-TextualConventionsMIB

AsciiString
NonReplicated

From Nortel-Magellan-Passport-UsefulDefinitionsMIB

components	OBJECT-IDENTITY
passportMIBs	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
fs	1.3.6.1.4.1.562.2.4.1.15
fsRowStatusTable	1.3.6.1.4.1.562.2.4.1.15.1		not-accessible	This entry controls the addition and deletion of fs components.
fsRowStatusEntry	1.3.6.1.4.1.562.2.4.1.15.1.1		not-accessible	A single entry in the table represents a single fs component.
ROW fsRowStatus	1.3.6.1.4.1.562.2.4.1.15.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of fs components. These components cannot be added nor deleted.
STR fsComponentName	1.3.6.1.4.1.562.2.4.1.15.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO fsStorageType	1.3.6.1.4.1.562.2.4.1.15.1.1.4	StorageType	read-only	This variable represents the storage type value for the fs tables.
NON fsIndex	1.3.6.1.4.1.562.2.4.1.15.1.1.10	NonReplicated	not-accessible	This variable represents the index for the fs tables.
fsDisk	1.3.6.1.4.1.562.2.4.1.15.2
fsDiskRowStatusTable	1.3.6.1.4.1.562.2.4.1.15.2.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of fsDisk components.
fsDiskRowStatusEntry	1.3.6.1.4.1.562.2.4.1.15.2.1.1		not-accessible	A single entry in the table represents a single fsDisk component.
ROW fsDiskRowStatus	1.3.6.1.4.1.562.2.4.1.15.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of fsDisk components. These components cannot be added nor deleted.
STR fsDiskComponentName	1.3.6.1.4.1.562.2.4.1.15.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO fsDiskStorageType	1.3.6.1.4.1.562.2.4.1.15.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the fsDisk tables.
I32 fsDiskIndex	1.3.6.1.4.1.562.2.4.1.15.2.1.1.10	Integer32	not-accessible	This variable represents the index for the fsDisk tables.
fsDiskTest	1.3.6.1.4.1.562.2.4.1.15.2.2
fsDiskTestRowStatusTable	1.3.6.1.4.1.562.2.4.1.15.2.2.1		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This entry controls the addition and deletion of fsDiskTest components.
fsDiskTestRowStatusEntry	1.3.6.1.4.1.562.2.4.1.15.2.2.1.1		not-accessible	A single entry in the table represents a single fsDiskTest component.
ROW fsDiskTestRowStatus	1.3.6.1.4.1.562.2.4.1.15.2.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of fsDiskTest components. These components cannot be added nor deleted.
STR fsDiskTestComponentName	1.3.6.1.4.1.562.2.4.1.15.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO fsDiskTestStorageType	1.3.6.1.4.1.562.2.4.1.15.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the fsDiskTest tables.
NON fsDiskTestIndex	1.3.6.1.4.1.562.2.4.1.15.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the fsDiskTest tables.
fsDiskTestStateTable	1.3.6.1.4.1.562.2.4.1.15.2.2.10		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
fsDiskTestStateEntry	1.3.6.1.4.1.562.2.4.1.15.2.2.10.1		not-accessible	An entry in the fsDiskTestStateTable.
INT fsDiskTestAdminState	1.3.6.1.4.1.562.2.4.1.15.2.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT fsDiskTestOperationalState	1.3.6.1.4.1.562.2.4.1.15.2.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT fsDiskTestUsageState	1.3.6.1.4.1.562.2.4.1.15.2.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
fsDiskTestSetupTable	1.3.6.1.4.1.562.2.4.1.15.2.2.11		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group contains the Test component operational data. The testCount, duration and type can be set to control the duration and the test type which will be run.
fsDiskTestSetupEntry	1.3.6.1.4.1.562.2.4.1.15.2.2.11.1		not-accessible	An entry in the fsDiskTestSetupTable.
U32 fsDiskTestTestCount	1.3.6.1.4.1.562.2.4.1.15.2.2.11.1.1	Unsigned32	read-write	This attribute indicates the number of times that the test will run. Note that the test will not run that many times if 'duration' is not long enough to allow the test to complete. The test will execute at least one and then stop at the count where duration has just exceeded.
U32 fsDiskTestDuration	1.3.6.1.4.1.562.2.4.1.15.2.2.11.1.2	Unsigned32	read-write	This attribute is the maximum duration (in minutes) that the test will run. The test can finish in less time if the number of tests, as recorded by testCount, is reached before this time. A test may take longer than the specified duration since a test cycle (or pass) is not interruptible.
INT fsDiskTestType	1.3.6.1.4.1.562.2.4.1.15.2.2.11.1.3	INTEGER	read-write	This attribute is the type of the test to be run. The diskRead test reads every sector on the disk once and reports bad sectors. The filesystemCheck does a sanity check and attempts to repair corruption. The flakyBitDetection test reads every sector on the disk twice and compares the two read results. The surfaceAnalysis test writes a magnetically hard to record pattern to the disk and reads back the pattern to determine the condition of the magnetic surface of the disk. The surface analysis test destroys all the data and disk should be formatted afterward.
fsDiskTestResultsTable	1.3.6.1.4.1.562.2.4.1.15.2.2.12		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group contains the results of the test.
fsDiskTestResultsEntry	1.3.6.1.4.1.562.2.4.1.15.2.2.12.1		not-accessible	An entry in the fsDiskTestResultsTable.
INT fsDiskTestCauseOfTermination	1.3.6.1.4.1.562.2.4.1.15.2.2.12.1.1	INTEGER	read-only	This attribute records the reason why the test was terminated. The reasons are: testCountReached: the test ran the number of times specified in the attribute testCount and ended normally. error: the test was terminated by an error that is recorded in the natureOfError attribute. neverStarted: the test was never started. stoppedByOperator: the test was terminated by the Stop command. testTimeExpired: the duration of the test expired. testRunning: the test is still running. unknown: the test terminated for unknown reasons. internalError: An internal error terminated the test.
INT fsDiskTestNatureOfError	1.3.6.1.4.1.562.2.4.1.15.2.2.12.1.2	INTEGER	read-only	This attribute describes the error found by a test. A logical error can be fixed by a filesystemCheck test followed eventually by a synchronization. A media error indicates that a fault in the disk hardware is suspected. A failedToComplete error indicates that the test was terminated.
INT fsDiskTestSeverity	1.3.6.1.4.1.562.2.4.1.15.2.2.12.1.3	INTEGER	read-only	This attribute describes the severity of the error found by a test. There are three types of severity: no data was lost, data was lost and hardware problem. If the test found no error(s), this will be reported as noError. If the test found error(s) but no data was lost, then noDataLost is reported.
U32 fsDiskTestElapsedTime	1.3.6.1.4.1.562.2.4.1.15.2.2.12.1.4	Unsigned32	read-only	This attribute records the elapsed time (in minutes) since the test was started.
U32 fsDiskTestTestExecutionCount	1.3.6.1.4.1.562.2.4.1.15.2.2.12.1.5	Unsigned32	read-only	The number of times the test had actually run.
fsDiskStateTable	1.3.6.1.4.1.562.2.4.1.15.2.10		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
fsDiskStateEntry	1.3.6.1.4.1.562.2.4.1.15.2.10.1		not-accessible	An entry in the fsDiskStateTable.
INT fsDiskAdminState	1.3.6.1.4.1.562.2.4.1.15.2.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT fsDiskOperationalState	1.3.6.1.4.1.562.2.4.1.15.2.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT fsDiskUsageState	1.3.6.1.4.1.562.2.4.1.15.2.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
fsDiskOperTable	1.3.6.1.4.1.562.2.4.1.15.2.11		not-accessible	* THIS TABLE CURRENTLY NOT IMPLEMENTED * This group contains the disk component operational data.
fsDiskOperEntry	1.3.6.1.4.1.562.2.4.1.15.2.11.1		not-accessible	An entry in the fsDiskOperTable.
STR fsDiskVolumeName	1.3.6.1.4.1.562.2.4.1.15.2.11.1.1	AsciiString	read-write	This attribute describes the volume name of the disk. The volume names of the two disks must be identical to be synchronized.
U32 fsDiskCapacity	1.3.6.1.4.1.562.2.4.1.15.2.11.1.2	Unsigned32	read-only	This attribute describes the total formatted disk size (in bytes) of the disk.
U32 fsDiskFreeSpace	1.3.6.1.4.1.562.2.4.1.15.2.11.1.3	Unsigned32	read-only	freeSpace This attribute indicates the available free disk space(in bytes) on the disk. Free space is reduced by bad blocks (if any). If there are different numbers of bad blocks on the disks in a dual-disk system, the reported free space will differ on the two disks. Moreover, due to the DOS file system internal representation of directories and files, adding and deleting files may fragment the disks differently resulting in some disk space wasted. A small discrepancy (less than 1% of the disk size) in the disks free space is considered as normal.
G32 fsDiskBadBlocksPercentage	1.3.6.1.4.1.562.2.4.1.15.2.11.1.4	Gauge32	read-only	This attribute records the percentage of the disk space lost because of defects. If this percentage is high, it is recommended to change the disk.
U32 fsDiskUnformattedCapacity	1.3.6.1.4.1.562.2.4.1.15.2.11.1.5	Unsigned32	read-only	unformattedCapacity This attribute indicates the physical disk size (in bytes). The physical disk size may be different from the formatted disk size if there are bad blocks or the disk has been formatted to a smaller disk size for backward compatibility with older releases.
fsStateTable	1.3.6.1.4.1.562.2.4.1.15.10		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
fsStateEntry	1.3.6.1.4.1.562.2.4.1.15.10.1		not-accessible	An entry in the fsStateTable.
INT fsAdminState	1.3.6.1.4.1.562.2.4.1.15.10.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT fsOperationalState	1.3.6.1.4.1.562.2.4.1.15.10.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT fsUsageState	1.3.6.1.4.1.562.2.4.1.15.10.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
fsOperTable	1.3.6.1.4.1.562.2.4.1.15.11		not-accessible	This group contains the filesystem operational data.
fsOperEntry	1.3.6.1.4.1.562.2.4.1.15.11.1		not-accessible	An entry in the fsOperTable.
STR fsVolumeName	1.3.6.1.4.1.562.2.4.1.15.11.1.1	AsciiString	read-only	This attribute describes the volume name of the filesystem. This is the active disk volume name.
NUM fsActiveDisk	1.3.6.1.4.1.562.2.4.1.15.11.1.2	RowPointer	read-only	The activeDisk attribute value is the Disk component instance value of the active disk. This is also the card number of the active control processor.
INT fsSyncStatus	1.3.6.1.4.1.562.2.4.1.15.11.1.3	INTEGER	read-only	The synchronization status value indicates whether the file system is synchronized or not.
G32 fsSyncProgress	1.3.6.1.4.1.562.2.4.1.15.11.1.4	Gauge32	read-only	The synchronization progress value indicates the percentage of the standby disk already synchronized with the active disk. This value is equal to 100 if the two disks are synchronized or 0 if they are out of synchronization.
U32 fsCapacity	1.3.6.1.4.1.562.2.4.1.15.11.1.5	Unsigned32	read-only	The Capacity attribute value is the total size of the filesystem (in bytes). This value is equal to the smallest disk size in a synchronized filesystem, otherwise it is the capacity of the active disk.
U32 fsFreeSpace	1.3.6.1.4.1.562.2.4.1.15.11.1.6	Unsigned32	read-only	This attribute describes the free disk space (in bytes) currently available in the filesystem. It is equal to the smallest free disk space size of the active and standby disks in a synchronized filesystem. When the filesystem is unsynchronized it is the free disk space of the active disk.
G32 fsUsage	1.3.6.1.4.1.562.2.4.1.15.11.1.7	Gauge32	read-only	This attribute describes the percentage of the free space available on the filesystem.
fileSystemMIB	1.3.6.1.4.1.562.2.4.2.16
fileSystemGroup	1.3.6.1.4.1.562.2.4.2.16.1
fileSystemGroupBD	1.3.6.1.4.1.562.2.4.2.16.1.4
fileSystemGroupBD00	1.3.6.1.4.1.562.2.4.2.16.1.4.1
fileSystemGroupBD00A	1.3.6.1.4.1.562.2.4.2.16.1.4.1.2
fileSystemCapabilities	1.3.6.1.4.1.562.2.4.2.16.3
fileSystemCapabilitiesBD	1.3.6.1.4.1.562.2.4.2.16.3.4
fileSystemCapabilitiesBD00	1.3.6.1.4.1.562.2.4.2.16.3.4.1
fileSystemCapabilitiesBD00A	1.3.6.1.4.1.562.2.4.2.16.3.4.1.2

RFC description

Manages file system operations on Nortel Magellan Passport platforms including disk access and storage.

Start monitoring Nortel Magellan Passport multiservice switch / processor-disk card (file system) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Nortel-Magellan-Passport-FileSystemMIB

What Is Nortel-Magellan-Passport-FileSystemMIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description