Nortel-Magellan-Passport-CallRedirectionMIB

All MIBs › Nortel-Magellan-Passport-CallRedirectionMIB

Category: Telephony/VoIP

Description: Manages Nortel Magellan Passport call redirection rules and alternate destination configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Nortel-Magellan-Passport-CallRedirectionMIB?

Nortel-Magellan-Passport-CallRedirectionMIB is a Nortel Magellan Passport switch MIB for configuring call redirection rules and alternate destination routing on this multiservice WAN switching platform, part of the same family as the ATM trunk and UNI MIBs. It exposes provisioning tables that define redirection rules keyed by logical processor and address, allowing calls or connection setup attempts to be redirected to an alternate destination under configured conditions. Its monitoring value lies in confirming that call redirection rules are correctly provisioned and active -- checking crsRowStatus to verify a rule is in service, and reviewing crsStateTable to see the current operational state of redirection logic on a given logical processor -- which is important for verifying failover/alternate-routing behavior is functioning as designed rather than silently disabled. It shares the same RowStatus/StorageType/ComponentName provisioning conventions used across the Magellan Passport MIB family (e.g. the ATM trunk and UNI MIBs), indicating a common underlying component model. It is deployed on Nortel Magellan Passport nodes where call/connection redirection is used for service continuity or routing policy enforcement. Engineers can download the Nortel-Magellan-Passport-CallRedirectionMIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-Magellan-Passport-CallRedirectionMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nortel Magellan Passport multiservice switch

Monitoring Examples

An operator would walk crsRowStatusTable/crsRowStatusEntry to check crsRowStatus per crsIndex, confirming a configured redirection rule is active rather than left in a notInService state after a maintenance change. Reviewing crsProvTable/crsProvEntry's crsLogicalProcessor field alongside crsStateTable/crsStateEntry reveals which logical processor a redirection rule applies to and its current operating state, useful for confirming a failover redirection is correctly armed. crsPAddr would be checked to confirm the alternate destination address configured for redirection matches the intended target.

What Can Be Monitored

call redirection rule row/operational status
logical processor assignment
redirection rule state
alternate destination address

Imported Objects

From Nortel-Magellan-Passport-StandardTextualConventionsMIB

Counter32
DisplayString
Integer32
RowStatus
StorageType
Unsigned32

From Nortel-Magellan-Passport-TextualConventionsMIB

AsciiString
AsciiStringIndex
Link
NonReplicated

From Nortel-Magellan-Passport-UsefulDefinitionsMIB

components	OBJECT-IDENTITY
passportMIBs	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
crs	1.3.6.1.4.1.562.2.4.1.132
crsRowStatusTable	1.3.6.1.4.1.562.2.4.1.132.1		not-accessible	This entry controls the addition and deletion of crs components.
crsRowStatusEntry	1.3.6.1.4.1.562.2.4.1.132.1.1		not-accessible	A single entry in the table represents a single crs component.
ROW crsRowStatus	1.3.6.1.4.1.562.2.4.1.132.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of crs components. These components can be added and deleted.
STR crsComponentName	1.3.6.1.4.1.562.2.4.1.132.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO crsStorageType	1.3.6.1.4.1.562.2.4.1.132.1.1.4	StorageType	read-only	This variable represents the storage type value for the crs tables.
NON crsIndex	1.3.6.1.4.1.562.2.4.1.132.1.1.10	NonReplicated	not-accessible	This variable represents the index for the crs tables.
crsPAddr	1.3.6.1.4.1.562.2.4.1.132.2
crsPAddrRowStatusTable	1.3.6.1.4.1.562.2.4.1.132.2.1		not-accessible	This entry controls the addition and deletion of crsPAddr components.
crsPAddrRowStatusEntry	1.3.6.1.4.1.562.2.4.1.132.2.1.1		not-accessible	A single entry in the table represents a single crsPAddr component.
ROW crsPAddrRowStatus	1.3.6.1.4.1.562.2.4.1.132.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of crsPAddr components. These components can be added and deleted.
STR crsPAddrComponentName	1.3.6.1.4.1.562.2.4.1.132.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO crsPAddrStorageType	1.3.6.1.4.1.562.2.4.1.132.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the crsPAddr tables.
STR crsPAddrIndex	1.3.6.1.4.1.562.2.4.1.132.2.1.1.10	AsciiStringIndex	not-accessible	This variable represents the index for the crsPAddr tables.
crsPAddrSRidMid	1.3.6.1.4.1.562.2.4.1.132.2.2
crsPAddrSRidMidRowStatusTable	1.3.6.1.4.1.562.2.4.1.132.2.2.1		not-accessible	This entry controls the addition and deletion of crsPAddrSRidMid components.
crsPAddrSRidMidRowStatusEntry	1.3.6.1.4.1.562.2.4.1.132.2.2.1.1		not-accessible	A single entry in the table represents a single crsPAddrSRidMid component.
ROW crsPAddrSRidMidRowStatus	1.3.6.1.4.1.562.2.4.1.132.2.2.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of crsPAddrSRidMid components. These components can be added and deleted.
STR crsPAddrSRidMidComponentName	1.3.6.1.4.1.562.2.4.1.132.2.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO crsPAddrSRidMidStorageType	1.3.6.1.4.1.562.2.4.1.132.2.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the crsPAddrSRidMid tables.
NON crsPAddrSRidMidIndex	1.3.6.1.4.1.562.2.4.1.132.2.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the crsPAddrSRidMid tables.
crsPAddrSRidMidRidMidProvTable	1.3.6.1.4.1.562.2.4.1.132.2.2.10		not-accessible	The SecRidMidProv group defines the secondary RID/MID pair associated with a specific primary address.
crsPAddrSRidMidRidMidProvEntry	1.3.6.1.4.1.562.2.4.1.132.2.2.10.1		not-accessible	An entry in the crsPAddrSRidMidRidMidProvTable.
U32 crsPAddrSRidMidRoutingId	1.3.6.1.4.1.562.2.4.1.132.2.2.10.1.2	Unsigned32	read-write	This attribute specifies a group of one or more interconnected nodes (called a subnet) to which the primary address is redirected.
U32 crsPAddrSRidMidModuleId	1.3.6.1.4.1.562.2.4.1.132.2.2.10.1.3	Unsigned32	read-write	This attribute specifies a Passport node to which the primary address is redirected.
crsPAddrSAddr	1.3.6.1.4.1.562.2.4.1.132.2.3
crsPAddrSAddrRowStatusTable	1.3.6.1.4.1.562.2.4.1.132.2.3.1		not-accessible	This entry controls the addition and deletion of crsPAddrSAddr components.
crsPAddrSAddrRowStatusEntry	1.3.6.1.4.1.562.2.4.1.132.2.3.1.1		not-accessible	A single entry in the table represents a single crsPAddrSAddr component.
ROW crsPAddrSAddrRowStatus	1.3.6.1.4.1.562.2.4.1.132.2.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of crsPAddrSAddr components. These components can be added and deleted.
STR crsPAddrSAddrComponentName	1.3.6.1.4.1.562.2.4.1.132.2.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO crsPAddrSAddrStorageType	1.3.6.1.4.1.562.2.4.1.132.2.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the crsPAddrSAddr tables.
I32 crsPAddrSAddrIndex	1.3.6.1.4.1.562.2.4.1.132.2.3.1.1.10	Integer32	not-accessible	This variable represents the index for the crsPAddrSAddr tables.
crsPAddrSAddrSecAddrProvTable	1.3.6.1.4.1.562.2.4.1.132.2.3.10		not-accessible	The SecAddrProv group defines one of the secondary addresses associated with a specific primary address.
crsPAddrSAddrSecAddrProvEntry	1.3.6.1.4.1.562.2.4.1.132.2.3.10.1		not-accessible	An entry in the crsPAddrSAddrSecAddrProvTable.
STR crsPAddrSAddrAddress	1.3.6.1.4.1.562.2.4.1.132.2.3.10.1.3	AsciiString	read-write	This attribute specifies a secondary address to which the primary address is redirected. The address attribute includes the Numbering Plan Indicator (NPI) and the digits which form a unique identifier of the customer interface. The address may belong to the X.121 or E.164 addressing plan. Address digits are selected and assigned by network operators. The address attribute takes the form: x. or e.
crsAltRid	1.3.6.1.4.1.562.2.4.1.132.3
crsAltRidRowStatusTable	1.3.6.1.4.1.562.2.4.1.132.3.1		not-accessible	This entry controls the addition and deletion of crsAltRid components.
crsAltRidRowStatusEntry	1.3.6.1.4.1.562.2.4.1.132.3.1.1		not-accessible	A single entry in the table represents a single crsAltRid component.
ROW crsAltRidRowStatus	1.3.6.1.4.1.562.2.4.1.132.3.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of crsAltRid components. These components can be added and deleted.
STR crsAltRidComponentName	1.3.6.1.4.1.562.2.4.1.132.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO crsAltRidStorageType	1.3.6.1.4.1.562.2.4.1.132.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the crsAltRid tables.
NON crsAltRidIndex	1.3.6.1.4.1.562.2.4.1.132.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the crsAltRid tables.
crsAltRidAltRidProvTable	1.3.6.1.4.1.562.2.4.1.132.3.10		not-accessible	The AltRidProv group defines the alternate RID associated with the Crs component.
crsAltRidAltRidProvEntry	1.3.6.1.4.1.562.2.4.1.132.3.10.1		not-accessible	An entry in the crsAltRidAltRidProvTable.
U32 crsAltRidRoutingId	1.3.6.1.4.1.562.2.4.1.132.3.10.1.2	Unsigned32	read-write	This attribute specifies a group of one or more interconnected nodes (called a subnet) to which the request is redirected.
crsProvTable	1.3.6.1.4.1.562.2.4.1.132.10		not-accessible	The Provisioned group contains provisionable attributes of the CallRedirectionServer component.
crsProvEntry	1.3.6.1.4.1.562.2.4.1.132.10.1		not-accessible	An entry in the crsProvTable.
LIN crsLogicalProcessor	1.3.6.1.4.1.562.2.4.1.132.10.1.2	Link	read-write	This attribute specifies the logical processor on which the call redirection server process is to run.
crsStateTable	1.3.6.1.4.1.562.2.4.1.132.11		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
crsStateEntry	1.3.6.1.4.1.562.2.4.1.132.11.1		not-accessible	An entry in the crsStateTable.
INT crsAdminState	1.3.6.1.4.1.562.2.4.1.132.11.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT crsOperationalState	1.3.6.1.4.1.562.2.4.1.132.11.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT crsUsageState	1.3.6.1.4.1.562.2.4.1.132.11.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
crsStatTable	1.3.6.1.4.1.562.2.4.1.132.12		not-accessible	The Statistics operational group defines the statistics associated with the CallRedirectionServer component.
crsStatEntry	1.3.6.1.4.1.562.2.4.1.132.12.1		not-accessible	An entry in the crsStatTable.
U32 crsTotalAddresses	1.3.6.1.4.1.562.2.4.1.132.12.1.2	Unsigned32	read-only	The totalAddresses attribute indicates the number of PrimaryAddress components associated with the CallRedirectionServer component.
C32 crsRequestsReceived	1.3.6.1.4.1.562.2.4.1.132.12.1.3	Counter32	read-only	The requestsReceived attribute counts the number of redirection requests received by the CallRedirectionServer component. This counter wraps to 0 when it exceeds its maximum value.
C32 crsPrimaryMatches	1.3.6.1.4.1.562.2.4.1.132.12.1.4	Counter32	read-only	The primaryMatches attribute counts the Call Redirection Server attempts to find a matching PrimaryAddress where the lookup attempt was successful. This counter wraps to 0 when it exceeds its maximum value.
C32 crsSecAddressListExhausted	1.3.6.1.4.1.562.2.4.1.132.12.1.5	Counter32	read-only	The secAddressListExhausted attribute counts the Call Redirection Server attempts to find a SecondaryAddress component given a PrimaryAddress component where the lookup attempt resulted in the exhaustion of the secondary redirection list. This counter wraps to 0 when it exceeds its maximum value.
C32 crsMaxAddrLenExceeded	1.3.6.1.4.1.562.2.4.1.132.12.1.6	Counter32	read-only	The maxAddrLenExceeded attribute counts how often the concatenation of the secondary address and the suffix digits from the original called address have exceeded the maximum of 15 digits. The suffix digits can be determined by removing the primary address digits from the front of the original called address. If appending the suffix digits to a secondary address causes the resulting address to exceed 15 digits, this secondary member is skipped and the next secondary member is tried.
C32 crsSecRidMidUnsuccessful	1.3.6.1.4.1.562.2.4.1.132.12.1.7	Counter32	read-only	The secRidMidUnsuccessful attribute counts the number of RID/ MID redirections resulting in the destination address not being reached. This situation could occur when the destination address does not exist on the specified module or the specified module could not be reached.
C32 crsSecAddrUnsuccessful	1.3.6.1.4.1.562.2.4.1.132.12.1.8	Counter32	read-only	The secAddrUnsuccessful attribute counts the number of Address redirections resulting in the destination user not being reached. This situation could occur when the destination user line is disabled, the destination address does not exist on the specified module, or the specified module could not be reached.
C32 crsRidRedirected	1.3.6.1.4.1.562.2.4.1.132.12.1.9	Counter32	read-only	The ridRedirected attribute counts requests received by the Call Redirection Server resulting in the request being redirected to another RID specified by the AlternateRid component. This counter wraps to 0 when it exceeds its maximum value.
C32 crsRidMidRedirected	1.3.6.1.4.1.562.2.4.1.132.12.1.10	Counter32	read-only	The ridMidRedirected attribute counts requests received by the Call Redirection Server resulting in the request being redirected to another RID/MID specified by the SecondaryRidMid component. This counter wraps to 0 when it exceeds its maximum value.
C32 crsAddressRedirected	1.3.6.1.4.1.562.2.4.1.132.12.1.11	Counter32	read-only	The addressRedirected attribute counts requests received by the Call Redirection Server resulting in the request being redirected to another Address specified by the SecondaryAddress component. This counter wraps to 0 when it exceeds its maximum value.
C32 crsAltRidUnsuccessful	1.3.6.1.4.1.562.2.4.1.132.12.1.12	Counter32	read-only	The altRidUnsuccessful attribute counts the number of RID redirections resulting in the destination address not being reached. This situation could occur when the alternate RID cannot be reached, the module hosting the destination address is isolated, or the port associated with the secondary address is unavailable at the alternate RID.
callRedirectionMIB	1.3.6.1.4.1.562.2.4.2.132
callRedirectionGroup	1.3.6.1.4.1.562.2.4.2.132.1
callRedirectionGroupBE	1.3.6.1.4.1.562.2.4.2.132.1.5
callRedirectionGroupBE01	1.3.6.1.4.1.562.2.4.2.132.1.5.2
callRedirectionGroupBE01A	1.3.6.1.4.1.562.2.4.2.132.1.5.2.2
callRedirectionCapabilities	1.3.6.1.4.1.562.2.4.2.132.3
callRedirectionCapabilitiesBE	1.3.6.1.4.1.562.2.4.2.132.3.5
callRedirectionCapabilitiesBE01	1.3.6.1.4.1.562.2.4.2.132.3.5.2
callRedirectionCapabilitiesBE01A	1.3.6.1.4.1.562.2.4.2.132.3.5.2.2

RFC description

Call redirection services on Nortel Magellan Passport platforms, providing alternate destinations for communications.

Start monitoring Nortel Magellan Passport multiservice switch (call redirection rules) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Nortel-Magellan-Passport-CallRedirectionMIB

What Is Nortel-Magellan-Passport-CallRedirectionMIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description