NMS-1705

All MIBs › NMS-1705

Last Updated: 2006-04-11

Category: Telephony/VoIP

Description: Manages NMS Communications 1705 platform card configuration and telephony interface parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NMS-1705?

NMS-1705 is a vendor-specific SNMP module from NMS Communications for its 1705 telephony platform card, used in voice/media processing systems. The module description available is generic boilerplate (referencing NAT) rather than a true description, and only a single top-level object identifier (nms1705Objects) was provided as a sample object, indicating this entry mostly reflects the module's registration root rather than detailed runtime objects. In general, a card-management MIB of this kind would expose configuration and status for telephony interface parameters and card-level operational health, such as card presence/state and channel status. Its likely monitoring value, where implemented, would be hardware status of the platform card (e.g. card up/down, channel utilization) within a larger telephony chassis. It would depend on a parent chassis/shelf MIB from NMS Communications for slot and chassis context, and would be deployed in telecom/media-gateway environments using NMS Communications 1705 platform cards. Engineers can download the NMS-1705 file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NMS-1705. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NMS Communications 1705 telephony platform card

Monitoring Examples

Only the top-level nms1705Objects identifier was available as a sample object, so a concrete polling scenario cannot be honestly constructed from this data; in general, an administrator would expect this branch to expose card and telephony-channel status objects for the 1705 platform card within a media-processing chassis.

Imported Objects

From NMS-SMI

nmsMgmt

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
nms1705MIB	1.3.6.1.4.1.11606.10.9.175			This MIB module defines the generic managed objects for NAT.
nms1705Objects	1.3.6.1.4.1.11606.10.9.175.1
adslLineTable	1.3.6.1.4.1.11606.10.9.175.1.1		not-accessible	A list of terminal server line entries.
adslLineEntry	1.3.6.1.4.1.11606.10.9.175.1.1.1		not-accessible	A collection of adsl objects in the nms Terminal Server implementation.
STR adslLineUser	1.3.6.1.4.1.11606.10.9.175.1.1.1.1	DisplayString	read-only	line user name, if line enabled, of user on this line.
STR adslProductID	1.3.6.1.4.1.11606.10.9.175.1.1.1.2	DisplayString	read-only	this is product id of the device.
IP adslConfigAddr	1.3.6.1.4.1.11606.10.9.175.1.1.1.3	IpAddress	read-only	this is the alloced ip address of the device.
INT adslLineNumber	1.3.6.1.4.1.11606.10.9.175.1.1.1.4	INTEGER	read-only	this is the online port number.
adslPeriodTable	1.3.6.1.4.1.11606.10.9.175.1.2		not-accessible	A list of terminal server line entries.
adslPeriodEntry	1.3.6.1.4.1.11606.10.9.175.1.2.1		not-accessible	A collection of adsl objects in the nms Terminal Server implementation.
OID adslMemLoad	1.3.6.1.4.1.11606.10.9.175.1.2.1.1	OBJECT IDENTIFIER	read-only	This is the memory load infomation. it could assign the identifier 1.3.6.1.4.1.3320.9.48.1
OID adslCPULoad	1.3.6.1.4.1.11606.10.9.175.1.2.1.2	OBJECT IDENTIFIER	read-only	This is the CPU load infomation. it could assign the identifier 1.3.6.1.4.1.3320.9.109.1.1.1.1.5
CTR adslPtInCRC	1.3.6.1.4.1.11606.10.9.175.1.2.1.3	Counter	read-only	The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space)
INT adslPtStatus	1.3.6.1.4.1.11606.10.9.175.1.2.1.4	INTEGER	read-write	The desired state of the port.
OID adslPtSpeed	1.3.6.1.4.1.11606.10.9.175.1.2.1.5	OBJECT IDENTIFIER	read-only	An estimate of the interface's current bandwidth in bits per second.it could assign the identifier 1.3.6.1.2.1.2.2.1.5��ifSpeed��
CTR adslPtOutPkts	1.3.6.1.4.1.11606.10.9.175.1.2.1.6	Counter	read-only	The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.
CTR adslPtInPkts	1.3.6.1.4.1.11606.10.9.175.1.2.1.7	Counter	read-only	The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer
OID adslPtOutError	1.3.6.1.4.1.11606.10.9.175.1.2.1.8	OBJECT IDENTIFIER	read-only	For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors.it could assign the identifier 1.3.6.1.2.1.2.2.1.20��ifOutErrors��
OID adslPtInError	1.3.6.1.4.1.11606.10.9.175.1.2.1.9	OBJECT IDENTIFIER	read-only	For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol.it could assign the identifier 1.3.6.1.2.1.2.2.1.14��ifInErrors��
OID adslPtOutSpeed	1.3.6.1.4.1.11606.10.9.175.1.2.1.10	OBJECT IDENTIFIER	read-only	it could assign the identifier 1.3.6.1.4.1.3320.2.2.1.1.9��nmslocIfOutPktsSec��
OID adslPtInSpeed	1.3.6.1.4.1.11606.10.9.175.1.2.1.11	OBJECT IDENTIFIER	read-only	it could assign the identifier 1.3.6.1.4.1.3320.2.2.1.1.7��nmslocIfInPktsSec��
OID adslPtOutDrop	1.3.6.1.4.1.11606.10.9.175.1.2.1.12	OBJECT IDENTIFIER	read-only	it could assign the identifier 1.3.6.1.4.1.3320.2.2.1.1.27��nmslocIfOutputQueueDrops��
OID adslPtInDrop	1.3.6.1.4.1.11606.10.9.175.1.2.1.13	OBJECT IDENTIFIER	read-only	it could assign the identifier 1.3.6.1.4.1.3320.2.2.1.1.26��nmslocIfInputQueueDrops��

RFC description

Defines managed objects for NAT gateway configuration on terminal server lines.

Start monitoring NMS Communications 1705 telephony platform card with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NMS-1705

What Is NMS-1705?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description