NQA-MIB :: nqaMtracertHistoryFwdCode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NQA-MIB › nqaMtracertHistoryFwdCode

nqaMtracertHistoryFwdCode

Module: NQA-MIB

OID (symbolic): NQA-MIB::nqaMtracertHistoryFwdCode

OID (numeric): 1.3.6.1.4.1.2011.5.25.111.5.3.1.18

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This field contains a forwarding information/error code. noError(1): No error wrongIf(2): Traceroute request arrived on an interface to which this router would not forward for this source,group,destination. pruneSent(3): This router has sent a prune upstream which applies to the source and group in the tracer- oute request. pruneRCVD(4): This router has stopped forwarding for this source and group in response to a request from the next hop router. scoped(5): The group is subject to administrative scoping at this hop. noRoute(6): This router has no route for the source or group and no way to determine a potential route. wrongLastHop(7): This router is not the proper last-hop router. notForwarding(8):This router is not forwarding this source,group out the outgoing interface for an unspecified reason. reachedRP(9): Reached Rendez-vous Point or Core rpfIf(10): Traceroute request arrived on the expected RPF interface for this source,group. noMulticast(11): Traceroute request arrived on an interface which is not enabled for multicast. infoHidden(12): One or more hops have been hidden from this trace. noSpace(13): There was not enough room to insert another response data block in the packet. oldRouter(14): The previous hop router does not understand traceroute requests. adminProhib(15): Traceroute is administratively prohibited.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.111.5.3.1.18
snmpwalk -v2c -c public <target> NQA-MIB::nqaMtracertHistoryFwdCode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.25.111.5.3.1.18.1
snmpget -v2c -c public <target> NQA-MIB::nqaMtracertHistoryFwdCode.1

Start monitoring Huawei router/switch (Network Quality Analysis active probes) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NQA-MIB::nqaMtracertHistoryFwdCode OID value, configure state conditions and alerts, and monitor any Huawei router/switch (Network Quality Analysis active probes) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2011huaweiEXPERTV2-MIB
1.3.6.1.4.1.2011.5huaweiMgmtHUAWEI-3COM-OID-MIB
1.3.6.1.4.1.2011.5.25huaweiDatacommHUAWEI-3COM-OID-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2011.5.25.111nqaNQA-MIB
1.3.6.1.4.1.2011.5.25.111.5nqaHistoryNQA-MIB
1.3.6.1.4.1.2011.5.25.111.5.3nqaMtracertHistoryTableNQA-MIB
1.3.6.1.4.1.2011.5.25.111.5.3.1nqaMtracertHistoryEntryNQA-MIB
1.3.6.1.4.1.2011.5.25.111.5.3.1.18nqaMtracertHistoryFwdCodeNQA-MIB