All MIBs › NNC-PKT-STATISTICS-MIB
Organization: Newbridge Networks Corporation
Last Updated: 1998-01-16
Category: ATM
Description: Monitors Newbridge Networks packet-level traffic statistics on ATM and frame relay interfaces.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is NNC-PKT-STATISTICS-MIB?
NNC-PKT-STATISTICS-MIB is a Newbridge Networks (later Alcatel) proprietary MIB for performance monitoring of packet-routed traffic over ATM/Frame Relay interfaces, part of the carrier WAN switching product line. It exposes historical performance data organized into current and historical 15-minute interval buckets for packet virtual circuit layer (VCL) statistics, following the RFC 1695 VPL/VCL model and RFC 2233 interval-table conventions. Its use centers on monitoring software/hardware performance counters, tracking per-VCL packet-routing statistics across rolling 15-minute intervals so operators can spot degrading throughput or error trends over time rather than just instantaneous state. It explicitly depends on RFC 1695 (ATM MIB VPL/VCL definitions) and RFC 2233 (interface performance interval tables) for its structure. It is typically deployed on Newbridge/Alcatel ATM/Frame Relay switches in carrier and enterprise WAN environments for capacity planning and SLA verification. Network engineers evaluating or troubleshooting this functionality can download the NNC-PKT-STATISTICS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in NNC-PKT-STATISTICS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Newbridge Networks ATM/Frame Relay switch
- Alcatel WAN switching platform
Monitoring Examples
An operator would poll the PKT VCL 15 Minute Current Table to obtain the in-progress interval's packet statistics for a given virtual channel link, and the PKT VCL 15 Minute Interval Table to retrieve historical 15-minute buckets (with nncDepthOfHistoricalStrata controlling how many intervals, nominally up to 32, are retained) for trend analysis. A sustained rise in packet error or discard counts across successive intervals in these tables would indicate a degrading ATM/Frame Relay circuit needing attention. No object names beyond the two tables and nncDepthOfHistoricalStrata are documented in the source.
What Can Be Monitored
- packet VCL current-interval statistics
- packet VCL historical 15-minute statistics
- number of historical intervals retained
- packet routing error trends
This MIB depends on
Related MIBs
Imported Objects
From ATM-MIB
| atmVclVci | OBJECT-TYPE |
| atmVclVpi | OBJECT-TYPE |
From IF-MIB
| ifIndex | OBJECT-TYPE |
From NNC-INTERVAL-STATISTICS-TC-MIB
| NncExtAbsIntvlNumberType | |
| NncExtIntvlStateType | |
| NncExtRelIntvlNumberType |
From NNCGNI0001-SMI
| NncExtCounter64 | |
| nncExtensions | OBJECT-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| nncExtPktStatistics | 1.3.6.1.4.1.123.3.50 | This module contains definitions for performance monitoring of the packets routed. This MIB module contains the following tables: PKT VCL 15 Minute Current Table PKT VCL 15 Minute Interval Table and the following non-table objects: nncDepthOfHistoricalStrata These tables are heavily influenced by the definition of VPL/VCL described in rfc1695, and by the statistic table definitions described in rfc2233. The number of intervals supported is dependent upon resource availibility on any given product, but should nominally be 32. To avoid building in massive amounts of storage, some products may adopt a bulk collection scheme. Note that IP packets are counted because of rfc1483. Intervals: Statistics on the performance of VPL/VCLs are collected over a historical stratum of up to a maximum of M intervals. The value of M is a function of a product's storage capability. For example, on the 36170 product, M = 1. Refer to a product's NEID document for a description of these limits. The intervals are 15 minutes and are aligned to the quarter of one hour of a wall clock. The current interval spans back to the last 15 minute tick on the wall clock. Continuing along the timeline from that point is the most recently completed interval and has an index of 1. The previous interval has an index of 2 and so on. Note that the oldest interval may be incomplete since the statistic collection may have been enabled offset to the quarter or one hour tick. t 0 -1i -2i -3i ===========|===========|===========|===========|=========== current N = 1 N = 2 N = 3 N = 4 ... N = M interval | ||
| nncPktStatisticsObjects | 1.3.6.1.4.1.123.3.50.1 | |||
| nncPktVcl15MinCurTable | 1.3.6.1.4.1.123.3.50.1.1 | not-accessible | The nncPktVcl15MinCurTable contains objects for monitoring the packet performance of a VCL during the current 15 minute interval. | |
| nncPktVcl15MinCurEntry | 1.3.6.1.4.1.123.3.50.1.1.1 | not-accessible | An entry in the 15 minute current statistics table. Each conceptual row contains current packet statistics for a particular VCL. | |
| NNC nncPktVcl15MinCurCoS | 1.3.6.1.4.1.123.3.50.1.1.1.1 | NncPktVclCoSType | not-accessible | The Class of Service provided for the cells in the current interval. |
| NUM nncPktVcl15MinCurState | 1.3.6.1.4.1.123.3.50.1.1.1.2 | NncExtIntvlStateType | read-only | The state of the current interval. The object provides a status for those entries which have been reset by th user, or have been subject to a wall clock time change. |
| NUM nncPktVcl15MinCurAbsoluteIntervalNumber | 1.3.6.1.4.1.123.3.50.1.1.1.3 | NncExtAbsIntvlNumberType | read-only | The absolute interval number of this interval |
| NUM nncPktVcl15MinCurInOctets | 1.3.6.1.4.1.123.3.50.1.1.1.4 | NncExtCounter64 | read-only | The total number of octets received on the interface, including protocol overhead, but excluding ATMs & AAL overhead. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinCurInUcastPkts | 1.3.6.1.4.1.123.3.50.1.1.1.5 | NncExtCounter64 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinCurInMulticastPkts | 1.3.6.1.4.1.123.3.50.1.1.1.6 | NncExtCounter64 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifInMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinCurInBroadcastPkts | 1.3.6.1.4.1.123.3.50.1.1.1.7 | NncExtCounter64 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinCurInDiscards | 1.3.6.1.4.1.123.3.50.1.1.1.8 | NncExtCounter64 | read-only | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinCurInErrors | 1.3.6.1.4.1.123.3.50.1.1.1.9 | NncExtCounter64 | read-only | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinCurOutOctets | 1.3.6.1.4.1.123.3.50.1.1.1.10 | NncExtCounter64 | read-only | The total number of octets transmitted out of the interface, including protocol overhead, but excluding ATMs & AAL overhead. This object is a 64-bit version of ifOutOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinCurOutUcastPkts | 1.3.6.1.4.1.123.3.50.1.1.1.11 | NncExtCounter64 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinCurOutMulticastPkts | 1.3.6.1.4.1.123.3.50.1.1.1.12 | NncExtCounter64 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinCurOutBroadcastPkts | 1.3.6.1.4.1.123.3.50.1.1.1.13 | NncExtCounter64 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinCurOutDiscards | 1.3.6.1.4.1.123.3.50.1.1.1.14 | NncExtCounter64 | read-only | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinCurOutErrors | 1.3.6.1.4.1.123.3.50.1.1.1.15 | NncExtCounter64 | read-only | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| nncPktVcl15MinIntTable | 1.3.6.1.4.1.123.3.50.1.2 | not-accessible | The nncPktVcl15MinIntTable contains objects for monitoring the packet performance of a virtual channel link over a historical stratum of M 15 minute intervals. | |
| nncPktVcl15MinIntEntry | 1.3.6.1.4.1.123.3.50.1.2.1 | not-accessible | An entry in the 15 minute interval statistics table. Each conceptual row contains packet statistics for a particular VCL and interval. | |
| NUM nncPktVcl15MinIntNumber | 1.3.6.1.4.1.123.3.50.1.2.1.1 | NncExtRelIntvlNumberType | not-accessible | The interval number (N) of the statistics in this row. |
| NNC nncPktVcl15MinIntCoS | 1.3.6.1.4.1.123.3.50.1.2.1.2 | NncPktVclCoSType | not-accessible | The Class of Service provided for the cells in the current interval. |
| NUM nncPktVcl15MinIntState | 1.3.6.1.4.1.123.3.50.1.2.1.3 | NncExtIntvlStateType | read-only | The state of the interval represented by this row. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change. |
| NUM nncPktVcl15MinIntAbsoluteIntervalNumber | 1.3.6.1.4.1.123.3.50.1.2.1.4 | NncExtAbsIntvlNumberType | read-only | The absolute interval number of this interval. |
| NUM nncPktVcl15MinIntInOctets | 1.3.6.1.4.1.123.3.50.1.2.1.5 | NncExtCounter64 | read-only | The total number of octets received on the interface, including protocol overhead, but excluding ATMs & AAL overhead. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinIntInUcastPkts | 1.3.6.1.4.1.123.3.50.1.2.1.6 | NncExtCounter64 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinIntInMulticastPkts | 1.3.6.1.4.1.123.3.50.1.2.1.7 | NncExtCounter64 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifInMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinIntInBroadcastPkts | 1.3.6.1.4.1.123.3.50.1.2.1.8 | NncExtCounter64 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinIntInDiscards | 1.3.6.1.4.1.123.3.50.1.2.1.9 | NncExtCounter64 | read-only | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinIntInErrors | 1.3.6.1.4.1.123.3.50.1.2.1.10 | NncExtCounter64 | read-only | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinIntOutOctets | 1.3.6.1.4.1.123.3.50.1.2.1.11 | NncExtCounter64 | read-only | The total number of octets transmitted out of the interface, including protocol overhead, but excluding ATMs & AAL overhead. This object is a 64-bit version of ifOutOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinIntOutUcastPkts | 1.3.6.1.4.1.123.3.50.1.2.1.12 | NncExtCounter64 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinIntOutMulticastPkts | 1.3.6.1.4.1.123.3.50.1.2.1.13 | NncExtCounter64 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinIntOutBroadcastPkts | 1.3.6.1.4.1.123.3.50.1.2.1.14 | NncExtCounter64 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinIntOutDiscards | 1.3.6.1.4.1.123.3.50.1.2.1.15 | NncExtCounter64 | read-only | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVcl15MinIntOutErrors | 1.3.6.1.4.1.123.3.50.1.2.1.16 | NncExtCounter64 | read-only | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| nncPktVclStatTable | 1.3.6.1.4.1.123.3.50.1.3 | not-accessible | The nncPktVclStatTable contains objects for monitoring the accumulated packet performance of a VCL since measurement started on the VCL. | |
| nncPktVclStatEntry | 1.3.6.1.4.1.123.3.50.1.3.1 | not-accessible | An entry in the Stat table. Each conceptual row contains accumulated stpacket atistics for a particular VCL. | |
| NNC nncPktVclStatCoS | 1.3.6.1.4.1.123.3.50.1.3.1.1 | NncPktVclCoSType | not-accessible | The Class of Service provided for the cells in the current interval. |
| NUM nncPktVclStatInOctets | 1.3.6.1.4.1.123.3.50.1.3.1.2 | NncExtCounter64 | read-only | The total number of octets received on the interface, including protocol overhead, but excluding ATMs & AAL overhead. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVclStatInUcastPkts | 1.3.6.1.4.1.123.3.50.1.3.1.3 | NncExtCounter64 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVclStatInMulticastPkts | 1.3.6.1.4.1.123.3.50.1.3.1.4 | NncExtCounter64 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifInMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVclStatInBroadcastPkts | 1.3.6.1.4.1.123.3.50.1.3.1.5 | NncExtCounter64 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVclStatInDiscards | 1.3.6.1.4.1.123.3.50.1.3.1.6 | NncExtCounter64 | read-only | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVclStatInErrors | 1.3.6.1.4.1.123.3.50.1.3.1.7 | NncExtCounter64 | read-only | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVclStatOutOctets | 1.3.6.1.4.1.123.3.50.1.3.1.8 | NncExtCounter64 | read-only | The total number of octets transmitted out of the interface, including protocol overhead, but excluding ATMs & AAL overhead. This object is a 64-bit version of ifOutOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVclStatOutUcastPkts | 1.3.6.1.4.1.123.3.50.1.3.1.9 | NncExtCounter64 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVclStatOutMulticastPkts | 1.3.6.1.4.1.123.3.50.1.3.1.10 | NncExtCounter64 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVclStatOutBroadcastPkts | 1.3.6.1.4.1.123.3.50.1.3.1.11 | NncExtCounter64 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVclStatOutDiscards | 1.3.6.1.4.1.123.3.50.1.3.1.12 | NncExtCounter64 | read-only | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| NUM nncPktVclStatOutErrors | 1.3.6.1.4.1.123.3.50.1.3.1.13 | NncExtCounter64 | read-only | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. Discontinuities in the value of this counter can occur at re-initialization of the management system, or if the VCL is disconnected |
| nncPktStatisticsTraps | 1.3.6.1.4.1.123.3.50.2 | |||
| nncPktStatisticsGroups | 1.3.6.1.4.1.123.3.50.3 | |||
| nncPktVcl15MinCurGroup | 1.3.6.1.4.1.123.3.50.3.5 | A collection of objects providing 15 Min current statistics for a VCI endpoint | ||
| nncPktVcl15MinIntGroup | 1.3.6.1.4.1.123.3.50.3.6 | A collection of objects providing 15 Min interval statistics for a VCI endpoint | ||
| nncPktVclStatGroup | 1.3.6.1.4.1.123.3.50.3.7 | A collection of objects providing cumulative statistics for a VCI endpoint | ||
| nncVclIntervalStateGroup | 1.3.6.1.4.1.123.3.50.3.8 | A collection of objects providing the state of intervals in the VCL current and interval tables. | ||
| nncPktStatisticsCompliances | 1.3.6.1.4.1.123.3.50.4 | |||
| nncPktStatisticsCompliance | 1.3.6.1.4.1.123.3.50.4.1 | The compliance statement for Newbridge SNMP entities which have Vpl endpoints which perform Bridging or IP Routing over ATM. |
RFC description
Packet statistics collection for ATM VCL performance monitoring on Newbridge Networks equipment.
Start monitoring Newbridge Networks/Alcatel ATM/Frame Relay switch (packet routing statistics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.