NMS-IF-MIB

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NMS-IF-MIB

Last Updated: 2005-09-07

Description: Manages analog voice interfaces (E&M, FXO, FXS) and their operational properties on NMS routers

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NMS-IF-MIB?

NMS-IF-MIB is a private enterprise MIB from NMS Communications for managing analog voice interfaces -- E&M (Ear and Mouth), FXO (Foreign Exchange Office), and FXS (Foreign Exchange Station) -- on NMS voice-enabled routers/gateways, rooted at nmsIfObjects. It exposes operational properties of these analog telephony interfaces, which typically include per-port signaling type, administrative/operational state, and line/loop-current or supervision status, though the specific sub-objects were not included in this extract. As a hardware/software interface-status MIB, it would let an operator confirm each analog voice port is administratively enabled and operationally up, useful for detecting a failed FXS port (e.g., a phone that stopped ringing) or an FXO trunk that lost its connection to the PSTN/PBX. It parallels the standard IETF IF-MIB (ifTable/ifEntry) concept but is specific to analog voice interface types not fully covered by the generic interfaces MIB. It is typically deployed on NMS Communications voice gateway routers that bridge analog telephony (PBX/PSTN) lines into a VoIP or packet network. Network engineers evaluating or troubleshooting this functionality can download the NMS-IF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NMS-IF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • NMS Communications voice gateway/router with analog telephony interfaces

Monitoring Examples

Only the top-level nmsIfObjects root was included in this extract, so specific column objects cannot be cited with confidence; however, given the description, an operator would be expected to walk a per-port table under nmsIfObjects to check each E&M/FXO/FXS interface's operational status and signaling configuration. A port reporting down or an unexpected signaling-type mismatch would explain a specific analog phone line or PBX trunk failing to pass calls.

What Can Be Monitored

  • analog voice interface (E&M/FXO/FXS) operational status
  • interface administrative state
Imported Objects

From NMS-SMI

nmsMgmtOBJECT-IDENTITY

From RFC1155-SMI

Gauge
TimeTicks

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

PhysAddress
OIDs

RFC description

Manages analog voice interfaces (E&M, FXO, FXS) on NMS routers, providing configuration and monitoring for voice port operations.

Start monitoring NMS Communications voice gateway/router (analog E&M/FXO/FXS interfaces) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NMS-IF-MIB