NMS-HAL-GLOBAL-MIB

All MIBs › NMS-HAL-GLOBAL-MIB

Category: Hardware Inventory

Description: Provides NMS Communications Hardware Abstraction Layer global configuration and platform capability objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NMS-HAL-GLOBAL-MIB?

NMS-HAL-GLOBAL-MIB is a private MIB (NMS-SMI enterprise family) holding hardware-abstraction-layer global switch settings. Its objects cover the EAPS (Ethernet Automatic Protection Switching) port link-status scan interval, system MTU, load-sharing enable and balance method, error-frame threshold/period for link-quality detection, and priority weightings for ARP, BGP, BPDU, and DHCP control-plane traffic. As a configuration MIB it lets an administrator confirm the EAPS scan interval and control-plane priority weightings match the intended resiliency and QoS design. It is deployed on switches (NMS SMI platform family) using EAPS ring resiliency. Engineers can download the NMS-HAL-GLOBAL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NMS-HAL-GLOBAL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

nms Co., Ltd. switch (hardware-abstraction-layer global settings, vendor unidentified)

Monitoring Examples

An administrator checks eapsLinkScanInterval to confirm how quickly an EAPS ring will detect a link failure, balancing faster detection against additional CPU polling overhead.

What Can Be Monitored

EAPS scan interval
control-plane traffic priority weightings

Imported Objects

From NMS-SWITCH-MIB

switchSystem

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress

From RFC1213-MIB

DisplayString
PhysAddress
ifIndex

OIDs

OID symbolic	OID numeric	Type	Access	Description
switchHALGlobal	1.3.6.1.4.1.11606.10.9.1.1.1.1
INT eapsLinkScanInterval	1.3.6.1.4.1.11606.10.9.1.1.1.1.1	INTEGER	read-write	Scan interval of port link status for EAPS. The range is from 10ms to 1000ms. Unit is 1ms. For IESwitch, default value is 10ms. For others, default value is 1000ms.
INT systemMTU	1.3.6.1.4.1.11606.10.9.1.1.1.1.2	INTEGER	read-write	System MTU. Unit is 1byte. Default value is 1510bytes.
INT shareLoad	1.3.6.1.4.1.11606.10.9.1.1.1.1.3	INTEGER	read-write	Share way of fabric bandwidth. Only valid for 85. 1 for single MCU data chanel and 2 for multishare MCU data chanel. Default is single.
INT shareLoadBalance	1.3.6.1.4.1.11606.10.9.1.1.1.1.4	INTEGER	read-write	The balance way for HiG channel. Only valid for 85. 1 for default, 2 for both-mac, 3 for both-ip, 4 for dest-mac, 5 for dest-ip, 6 for src-mac, 7 for src-ip, 8 for src-port.
INT errorFrameThreshold	1.3.6.1.4.1.11606.10.9.1.1.1.1.5	INTEGER	read-write	The threshold of error frame alarm. The range is for 1 - 1000000. Unit is packet. Default is 10 packets.
INT errorFramePeriod	1.3.6.1.4.1.11606.10.9.1.1.1.1.6	INTEGER	read-write	The period of error frame sampling. The range is for 1 - 3600. Unit is second. Default is 10S.
INT arpPriority	1.3.6.1.4.1.11606.10.9.1.1.1.1.7	INTEGER	read-write	The ARP packet priority to host CPU. The range is 0-7. Default is 0.
INT bgpPriority	1.3.6.1.4.1.11606.10.9.1.1.1.1.8	INTEGER	read-write	The BGP packet priority to host CPU. The range is 0-7. Default is 0.
INT bpduPriority	1.3.6.1.4.1.11606.10.9.1.1.1.1.9	INTEGER	read-write	The BPDU packet priority to host CPU. The range is 0-7. Default is 3.
INT dhcpPriority	1.3.6.1.4.1.11606.10.9.1.1.1.1.10	INTEGER	read-write	The DHCP packet priority to host CPU. The range is 0-7. Default is 0.
INT igmpPriority	1.3.6.1.4.1.11606.10.9.1.1.1.1.11	INTEGER	read-write	The IGMP packet priority to host CPU. The range is 0-7. Default is 0.
INT reservedIPMCPriority	1.3.6.1.4.1.11606.10.9.1.1.1.1.12	INTEGER	read-write	The ReservedIPMC packet priority to host CPU. The range is 0-7. Default is 0.
INT lookupFailPriority	1.3.6.1.4.1.11606.10.9.1.1.1.1.13	INTEGER	read-write	The look up failed packet priority to host CPU. The range is 0-7. Default is 0.
INT protoExecPriority	1.3.6.1.4.1.11606.10.9.1.1.1.1.14	INTEGER	read-write	The TTL=1 packet priority to host CPU. The range is 0-7. Default is 0.
INT defaultPriority	1.3.6.1.4.1.11606.10.9.1.1.1.1.15	INTEGER	read-write	The default packet priority to host CPU. The range is 0-7. Default is 0.
INT cpuPortThreshold	1.3.6.1.4.1.11606.10.9.1.1.1.1.16	INTEGER	read-write	The rate limitation of cpu port. Unit is 64kbps. The range is 1-1562. 0 means disable. Default is 0.
INT l2TblHashAlgo	1.3.6.1.4.1.11606.10.9.1.1.1.1.17	INTEGER	read-write	The hash algorithm of MAC address table. The range is 1-5. 1 means CRC32 upper,2 means CRC32 lower, 3 means LSB,4 means CRC16 lower,5 means CRC16 upper. Default is 2.
INT cutThrough	1.3.6.1.4.1.11606.10.9.1.1.1.1.18	INTEGER	read-write	The cut-through of switching function. The range is disable/enable. 0 means disable 1 means enable. Default is 0.

RFC description

Manages switch hardware abstraction layer settings including MTU, link scanning, and load balancing.

Start monitoring nms Co., Ltd. switch (hardware-abstraction-layer global settings, vendor unidentified) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NMS-HAL-GLOBAL-MIB

What Is NMS-HAL-GLOBAL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description