All MIBs › NLSP
Description: MIB for NetWare Link Services Protocol routing, adjacency, LSP, and circuit management in Novell IPX network environments
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is NLSP?
NLSP is a private MIB (enterprise OID 23) implementing NLSP (NetWare Link Services Protocol), Novell's link-state routing protocol for IPX networks, analogous to OSPF/IS-IS. Its system table, keyed by instance, records protocol state, system ID, minimum non-broadcast/broadcast LSP transmission intervals, minimum/maximum LSP generation intervals, and maximum LSP age. As a configuration/protocol-status MIB it lets an administrator confirm NLSP timer settings are consistent across routers when diagnosing slow convergence in a legacy IPX/NetWare network. It is deployed on routers running NLSP in legacy Novell NetWare environments. Engineers can download the NLSP file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in NLSP. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Routers running NLSP (legacy Novell NetWare/IPX environments)
Monitoring Examples
An administrator compares nlspSysMinLSPGenInt and nlspSysMaxLSPAge across NLSP routers to confirm consistent timer settings when diagnosing unusually slow route convergence in a legacy IPX network.
What Can Be Monitored
- NLSP protocol state and LSP timing parameters
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| enterprises |
From RFC1213-MIB
| PhysAddress |
From SNMPv2-TC
| TEXTUAL-CONVENTION |
How to Use in IPNetwork Monitor
Example using nlspSysL1DbaseOloads OID:
Select a Router running NLSP (legacy Novell NetWare/IPX environment) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type nlspSysL1DbaseOloads into the Find box to locate it in the OID tree, then select it and click OK. The number of times the NLSP Level 1 LSP database has become overloaded. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| novell | 1.3.6.1.4.1.23 | |||
| mibDoc | 1.3.6.1.4.1.23.2 | |||
| nlsp | 1.3.6.1.4.1.23.2.19 | |||
| nlspSystem | 1.3.6.1.4.1.23.2.19.1 | |||
| nlspSysTable | 1.3.6.1.4.1.23.2.19.1.1 | not-accessible | The NLSP system table. | |
| nlspSysEntry | 1.3.6.1.4.1.23.2.19.1.1.1 | not-accessible | Each entry corresponds to one instance of NLSP running on the system. | |
| INT nlspSysInstance | 1.3.6.1.4.1.23.2.19.1.1.1.1 | INTEGER | read-write | The unique identifier of the instance of NLSP to which this corresponds. This value links the instance of NLSP to an instance of IPX running on the system (i.e. the value of nlspSysInstance should be the same as a value of ipxSysInstance). This value may be written only when creating a new entry in the table. |
| INT nlspSysState | 1.3.6.1.4.1.23.2.19.1.1.1.2 | INTEGER | read-write | Indicates the operational state of this instance of NLSP. |
| SYS nlspSysID | 1.3.6.1.4.1.23.2.19.1.1.1.3 | SystemID | read-write | The system ID for this instance of NLSP. |
| INT nlspSysMinNonBcastLSPTransInt | 1.3.6.1.4.1.23.2.19.1.1.1.4 | INTEGER | read-write | The minimum interval, in seconds, between transmission of LSPs on a non-broadcast circuit. |
| INT nlspSysMinBcastLSPTransInt | 1.3.6.1.4.1.23.2.19.1.1.1.5 | INTEGER | read-write | The minimum interval, in seconds, between transmission of LSPs on a broadcast circuit. |
| INT nlspSysMinLSPGenInt | 1.3.6.1.4.1.23.2.19.1.1.1.6 | INTEGER | read-write | The minimum interval, in seconds, between the generation of the same LSP. |
| INT nlspSysMaxLSPGenInt | 1.3.6.1.4.1.23.2.19.1.1.1.7 | INTEGER | read-write | The maximum interval, in seconds, between the generation of the same LSP. |
| INT nlspSysMaxLSPAge | 1.3.6.1.4.1.23.2.19.1.1.1.8 | INTEGER | read-write | The value, in seconds, placed in the lifetime field of LSPs generated by this instance of NLSP. |
| INT nlspSysBcastHelloInt | 1.3.6.1.4.1.23.2.19.1.1.1.9 | INTEGER | read-write | The interval, in seconds, at which NLSP Hellos will be sent on a broadcast circuit, if this system is not the designated router. |
| INT nlspSysNonBcastHelloInt | 1.3.6.1.4.1.23.2.19.1.1.1.10 | INTEGER | read-write | The interval, in seconds, at which NLSP Hellos will be sent on a non-broadcast circuit. |
| INT nlspSysDRBcastHelloInt | 1.3.6.1.4.1.23.2.19.1.1.1.11 | INTEGER | read-write | The interval, in seconds, at which the designated router sends NLSP Hellos on a broadcast circuit. |
| INT nlspSysHoldTimeMultiplier | 1.3.6.1.4.1.23.2.19.1.1.1.12 | INTEGER | read-write | The holding time multiplier used to specify the holding time for NLSP neighbor entries as a function of the NLSP Hello interval. |
| INT nlspSysCompSNPInt | 1.3.6.1.4.1.23.2.19.1.1.1.13 | INTEGER | read-write | The interval, in seconds, between generation of Complete Sequence Number Packets by a designated router on a broadcast circuit. |
| INT nlspSysPartSNPInt | 1.3.6.1.4.1.23.2.19.1.1.1.14 | INTEGER | read-write | The minimum interval, in seconds, between transmission of Partial Sequence Number Packets. |
| INT nlspSysWaitTime | 1.3.6.1.4.1.23.2.19.1.1.1.15 | INTEGER | read-write | The number of seconds to delay in the waiting state before entering the on state. |
| INT nlspSysOrigL1LSPBufSize | 1.3.6.1.4.1.23.2.19.1.1.1.16 | INTEGER | read-write | The maximum size of Level 1 LSPs originated by this instance of NLSP. |
| INT nlspSysVersion | 1.3.6.1.4.1.23.2.19.1.1.1.17 | INTEGER | read-only | The version number of this instance of NLSP. |
| CTR nlspSysCorrLSPs | 1.3.6.1.4.1.23.2.19.1.1.1.18 | Counter | read-only | The number of corrupt LSPs detected. |
| INT nlspSysL1Overloaded | 1.3.6.1.4.1.23.2.19.1.1.1.19 | INTEGER | read-only | Indicates whether the NLSP Level 1 database is overloaded. |
| CTR nlspSysL1DbaseOloadsEx | 1.3.6.1.4.1.23.2.19.1.1.1.20 | Counter | read-only | The number of times the NLSP Level 1 LSP database has become overloaded. |
| CTR nlspSysMaxSeqNums | 1.3.6.1.4.1.23.2.19.1.1.1.21 | Counter | read-only | The number of times the router has attempted to exceed NLSP's maximum sequence number. |
| CTR nlspSysSeqNumSkips | 1.3.6.1.4.1.23.2.19.1.1.1.22 | Counter | read-only | The number of times a sequence number skip has occurred. |
| CTR nlspSysTransmittedLSPs | 1.3.6.1.4.1.23.2.19.1.1.1.23 | Counter | read-only | The number of LSPs transmitted by this system. |
| CTR nlspSysReceivedLSPs | 1.3.6.1.4.1.23.2.19.1.1.1.24 | Counter | read-only | The number of LSPs received by this system. |
| CTR nlspSysOwnLSPPurges | 1.3.6.1.4.1.23.2.19.1.1.1.25 | Counter | read-only | The number of times a zero-aged copy of the router's own LSP has been received from some other node. |
| CTR nlspSysVersionErrors | 1.3.6.1.4.1.23.2.19.1.1.1.26 | Counter | read-only | The number of times that a received NLSP packet was rejected because its version number was invalid. |
| CTR nlspSysIncorrectPackets | 1.3.6.1.4.1.23.2.19.1.1.1.27 | Counter | read-only | The number of times that an incorrectly formatted NLSP packet was received. |
| INT nlspSysNearestL2DefaultExists | 1.3.6.1.4.1.23.2.19.1.1.1.28 | INTEGER | read-only | Indicates whether this instance of NLSP knows of a NLSP Level 2 router that currently can reach other areas using the default metric. |
| SYS nlspSysNearestL2DefaultRouter | 1.3.6.1.4.1.23.2.19.1.1.1.29 | SystemID | read-only | The system ID of the nearest NLSP Level 2 router that currently can reach other areas using the default metric. The value is undefined if the value of nlspSysNearestL2DefaultExists is no(1). |
| CTR nlspSysResourceFailures | 1.3.6.1.4.1.23.2.19.1.1.1.30 | Counter | read-only | The number of times this instance of the NLSP has been unable to obtain needed resources (memory, etc.) |
| nlspSysAreaTable | 1.3.6.1.4.1.23.2.19.1.2 | not-accessible | The System Area Address table contains the area addresses configured for NLSP. | |
| nlspSysAreaEntry | 1.3.6.1.4.1.23.2.19.1.2.1 | not-accessible | Each entry in the table corresponds to one NLSP System Area Address. | |
| INT nlspSysAreaSysInstance | 1.3.6.1.4.1.23.2.19.1.2.1.1 | INTEGER | read-write | The unique identifier of the instance of NLSP and IPX (via ipxSysInstance) to which this row corresponds. |
| OCT nlspSysAreaNet | 1.3.6.1.4.1.23.2.19.1.2.1.2 | OCTET STRING | read-write | The network address portion of the area address. |
| OCT nlspSysAreaMask | 1.3.6.1.4.1.23.2.19.1.2.1.3 | OCTET STRING | read-write | The mask portion of the area address. |
| nlspActAreaTable | 1.3.6.1.4.1.23.2.19.1.3 | not-accessible | The Actual Area Address table contains the area addresses actually used by NLSP. | |
| nlspActAreaEntry | 1.3.6.1.4.1.23.2.19.1.3.1 | not-accessible | Each entry in the table corresponds to one NLSP Actual Area Address. | |
| INT nlspActAreaSysInstance | 1.3.6.1.4.1.23.2.19.1.3.1.1 | INTEGER | read-write | The unique identifier of the instance of NLSP and IPX (via ipxSysInstance) to which this row corresponds. |
| OCT nlspActAreaNet | 1.3.6.1.4.1.23.2.19.1.3.1.2 | OCTET STRING | read-write | The network address portion of the area address. |
| OCT nlspActAreaMask | 1.3.6.1.4.1.23.2.19.1.3.1.3 | OCTET STRING | read-write | The mask portion of the area address. |
| nlspCircuit | 1.3.6.1.4.1.23.2.19.2 | |||
| nlspCircTable | 1.3.6.1.4.1.23.2.19.2.1 | not-accessible | The Circuit table. | |
| nlspCircEntry | 1.3.6.1.4.1.23.2.19.2.1.1 | not-accessible | Each entry corresponds to one circuit known to the system. | |
| INT nlspCircSysInstance | 1.3.6.1.4.1.23.2.19.2.1.1.1 | INTEGER | read-write | The unique identifier of the instance of NLSP and IPX (via ipxSysInstance) to which this entry corresponds. This value may be written only when creating a new entry in the table. |
| INT nlspCircIndex | 1.3.6.1.4.1.23.2.19.2.1.1.2 | INTEGER | read-write | The identifier of this circuit, unique within the instance of NLSP. This value may be written only when creating a new entry in the table. |
| INT nlspCircState | 1.3.6.1.4.1.23.2.19.2.1.1.3 | INTEGER | read-write | Indicates whether NLSP information may be sent/received over this circuit. |
| INT nlspCircPace | 1.3.6.1.4.1.23.2.19.2.1.1.4 | INTEGER | read-write | The maximum pace, in packets per second, at which NLSP packets may be sent on this circuit. |
| INT nlspCircHelloTimer | 1.3.6.1.4.1.23.2.19.2.1.1.5 | INTEGER | read-write | The interval, in seconds, between NLSP Hello packets sent on this circuit. |
| INT nlspCircL1DefaultCost | 1.3.6.1.4.1.23.2.19.2.1.1.6 | INTEGER | read-write | The NLSP default cost of this circuit for Level 1 traffic. |
| INT nlspCircL1DesRouterPriority | 1.3.6.1.4.1.23.2.19.2.1.1.7 | INTEGER | read-write | The priority for becoming the NLSP LAN Level 1 Designated Router on a broadcast circuit. |
| OCT nlspCircL1CircID | 1.3.6.1.4.1.23.2.19.2.1.1.8 | OCTET STRING | read-only | The NLSP ID for this circuit. |
| SYS nlspCircL1DesRouter | 1.3.6.1.4.1.23.2.19.2.1.1.9 | SystemID | read-only | The system ID of the NLSP LAN Level 1 Designated Router on this circuit. |
| CTR nlspCircLANL1DesRouterChanges | 1.3.6.1.4.1.23.2.19.2.1.1.10 | Counter | read-only | The number of times the NLSP LAN Level 1 Designated Router has changed on this circuit. |
| CTR nlspCircNeighChanges | 1.3.6.1.4.1.23.2.19.2.1.1.11 | Counter | read-only | The number of times a NLSP neighbor state change has occurred on this circuit. |
| CTR nlspCircRejNeighbors | 1.3.6.1.4.1.23.2.19.2.1.1.12 | Counter | read-only | The number of times that a NLSP neighbor has been rejected on this circuit. |
| CTR nlspCircOutPackets | 1.3.6.1.4.1.23.2.19.2.1.1.13 | Counter | read-only | The number of NLSP packets sent on this circuit. |
| CTR nlspCircInPackets | 1.3.6.1.4.1.23.2.19.2.1.1.14 | Counter | read-only | The number of NLSP packets received on this circuit. |
| INT nlspCircActualMaxPacketSize | 1.3.6.1.4.1.23.2.19.2.1.1.15 | INTEGER | read-only | The actual maximum packet size (including header), in bytes, that has been used on this circuit. |
| CTR nlspCircPSNPsSent | 1.3.6.1.4.1.23.2.19.2.1.1.16 | Counter | read-only | The number of PSNPs sent on this circuit. |
| CTR nlspCircPSNPsReceived | 1.3.6.1.4.1.23.2.19.2.1.1.17 | Counter | read-only | The number of PSNPs received on this circuit. |
| nlspForwarding | 1.3.6.1.4.1.23.2.19.3 | |||
| nlspDestTable | 1.3.6.1.4.1.23.2.19.3.1 | not-accessible | The Destination table contains information about all known destinations learned about via NLSP. | |
| nlspDestEntry | 1.3.6.1.4.1.23.2.19.3.1.1 | not-accessible | Each entry corresponds to one destination. | |
| INT nlspDestSysInstance | 1.3.6.1.4.1.23.2.19.3.1.1.1 | INTEGER | read-only | The unique identifier of the instance of NLSP and IPX (via ipxSysInstance) to which this row corresponds. |
| NET nlspDestNetNum | 1.3.6.1.4.1.23.2.19.3.1.1.2 | NetNumber | read-only | The IPX network number of the destination. |
| NLS nlspDestID | 1.3.6.1.4.1.23.2.19.3.1.1.3 | NLSPID | read-only | The destination NLSP ID (6-octet system ID plus 1-octet pseudo-node ID). |
| INT nlspDestEstDelay | 1.3.6.1.4.1.23.2.19.3.1.1.4 | INTEGER | read-only | The estimated delay, in milliseconds, to reach the destination. |
| INT nlspDestEstThroughput | 1.3.6.1.4.1.23.2.19.3.1.1.5 | INTEGER | read-only | The estimated throughput, in bits per second, to the destination. |
| NLS nlspDestNextHopID | 1.3.6.1.4.1.23.2.19.3.1.1.6 | NLSPID | read-only | The NLSP ID (6-octet system ID plus 1-octet pseudo-node ID) of the next hop. |
| INT nlspDestCost | 1.3.6.1.4.1.23.2.19.3.1.1.7 | INTEGER | read-only | The total path default cost to reach this destination. |
| nlspNeighbors | 1.3.6.1.4.1.23.2.19.4 | |||
| nlspNeighTable | 1.3.6.1.4.1.23.2.19.4.1 | not-accessible | The NLSP Neighbors table. | |
| nlspNeighEntry | 1.3.6.1.4.1.23.2.19.4.1.1 | not-accessible | Each entry corressponds to one neighboring NLSP router known to the system. | |
| INT nlspNeighSysInstance | 1.3.6.1.4.1.23.2.19.4.1.1.1 | INTEGER | read-only | The unique identifier of the instance of NLSP and IPX (via ipxSysInstance) to which this row corresponds. |
| INT nlspNeighCircIndex | 1.3.6.1.4.1.23.2.19.4.1.1.2 | INTEGER | read-only | The identifier of the parent circuit of this neighbor within this instance of the NLSP and IPX. |
| INT nlspNeighIndex | 1.3.6.1.4.1.23.2.19.4.1.1.3 | INTEGER | read-only | The identifier for this NLSP neighbor entry, unique within the parent circuit. |
| INT nlspNeighState | 1.3.6.1.4.1.23.2.19.4.1.1.4 | INTEGER | read-only | The state of the connection to the neighboring NLSP router. |
| PHY nlspNeighNICAddress | 1.3.6.1.4.1.23.2.19.4.1.1.5 | PhysAddress | read-only | The NIC Address of the neighboring NLSP router. |
| INT nlspNeighSysType | 1.3.6.1.4.1.23.2.19.4.1.1.6 | INTEGER | read-only | The type of the neighboring NLSP router. |
| SYS nlspNeighSysID | 1.3.6.1.4.1.23.2.19.4.1.1.7 | SystemID | read-only | The neighboring NLSP router's system ID. |
| OCT nlspNeighName | 1.3.6.1.4.1.23.2.19.4.1.1.8 | OCTET STRING | read-only | The readable name for the neighboring NLSP router. |
| INT nlspNeighUsage | 1.3.6.1.4.1.23.2.19.4.1.1.9 | INTEGER | read-only | The usage of the connection to the neighboring NLSP router. |
| INT nlspNeighHoldTimer | 1.3.6.1.4.1.23.2.19.4.1.1.10 | INTEGER | read-only | The initial holding time, in seconds, for this NLSP neighbor entry as specified in the NLSP Hello packet. |
| INT nlspNeighRemainingTime | 1.3.6.1.4.1.23.2.19.4.1.1.11 | INTEGER | read-only | The remaining time to live, in seconds, for this NLSP neighbor entry. |
| INT nlspNeighPriority | 1.3.6.1.4.1.23.2.19.4.1.1.12 | INTEGER | read-only | The priority of the neighboring NLSP router for becoming the LAN Level 1 Designated router if the value of nlspNeighSysType is nlspLevel1Router. |
| nlspTranslation | 1.3.6.1.4.1.23.2.19.5 | |||
| nlspIDMapTable | 1.3.6.1.4.1.23.2.19.5.1 | not-accessible | This table maps NLSP system IDs to router names and IPX network numbers. | |
| nlspIDMapEntry | 1.3.6.1.4.1.23.2.19.5.1.1 | not-accessible | Each entry maps one NLSP system ID to its corresponding router name and IPX network number. | |
| INT nlspIDMapSysInstance | 1.3.6.1.4.1.23.2.19.5.1.1.1 | INTEGER | read-only | The unique identifier of the instance of NLSP and IPX (via ipxSysInstance) to which this row corresponds. |
| NLS nlspIDMapID | 1.3.6.1.4.1.23.2.19.5.1.1.2 | NLSPID | read-only | The NLSP ID (6-octet sytem ID plus the pseudo-node ID). |
| OCT nlspIDMapServerName | 1.3.6.1.4.1.23.2.19.5.1.1.3 | OCTET STRING | read-only | The readable name corresponding to this NLSP ID. |
| NET nlspIDMapNetNum | 1.3.6.1.4.1.23.2.19.5.1.1.4 | NetNumber | read-only | The IPX network number corresponding to this NLSP ID. |
| nlspNetMapTable | 1.3.6.1.4.1.23.2.19.5.2 | not-accessible | This table maps IPX network numbers to router names and NLSP IDs. | |
| nlspNetMapEntry | 1.3.6.1.4.1.23.2.19.5.2.1 | not-accessible | Each entry maps one IPX network number to its corresponding router name and NLSP ID. | |
| INT nlspNetMapSysInstance | 1.3.6.1.4.1.23.2.19.5.2.1.1 | INTEGER | read-only | The unique identifier of the instance of NLSP and IPX (via ipxSysInstance) to which this row corresponds. |
| NET nlspNetMapNetNum | 1.3.6.1.4.1.23.2.19.5.2.1.2 | NetNumber | read-only | The IPX network number. |
| OCT nlspNetMapServerName | 1.3.6.1.4.1.23.2.19.5.2.1.3 | OCTET STRING | read-only | The router name corresponding to the IPX network number. |
| NLS nlspNetMapID | 1.3.6.1.4.1.23.2.19.5.2.1.4 | NLSPID | read-only | The NLSP ID corresponding to the IPX network number. |
| nlspNameMapTable | 1.3.6.1.4.1.23.2.19.5.3 | not-accessible | This table maps router names to the corresponding IPX network number and NLSP ID. | |
| nlspNameMapEntry | 1.3.6.1.4.1.23.2.19.5.3.1 | not-accessible | Each entry maps one router name to its corresponding IPX network number and NLSP ID. | |
| INT nlspNameMapSysInstance | 1.3.6.1.4.1.23.2.19.5.3.1.1 | INTEGER | read-only | The unique identifier of the instance of NLSP and IPX (via ipxSysInstance) to which this row corresponds. |
| OCT nlspNameMapServerName | 1.3.6.1.4.1.23.2.19.5.3.1.2 | OCTET STRING | read-only | The readable name for this system. |
| NET nlspNameMapNetNum | 1.3.6.1.4.1.23.2.19.5.3.1.3 | NetNumber | read-only | The IPX network number corresponding to the router name. |
| NLS nlspNameMapID | 1.3.6.1.4.1.23.2.19.5.3.1.4 | NLSPID | read-only | The NLSP ID corresponding to the router name. This value is undefined if the value of nlspSysState is off. |
| nlspGraph | 1.3.6.1.4.1.23.2.19.6 | |||
| nlspNodeTable | 1.3.6.1.4.1.23.2.19.6.1 | not-accessible | The node table contains an entry for each node in the graph. | |
| nlspNodeEntry | 1.3.6.1.4.1.23.2.19.6.1.1 | not-accessible | Each entry corresponds to one graph node. | |
| INT nlspNodeSysInstance | 1.3.6.1.4.1.23.2.19.6.1.1.1 | INTEGER | read-only | The unique identifier of the instance of NLSP and IPX (via ipxSysInstance) to which this row corresponds. |
| NLS nlspNodeID | 1.3.6.1.4.1.23.2.19.6.1.1.2 | NLSPID | read-only | The NLSP ID for this node. |
| NET nlspNodeNetNum | 1.3.6.1.4.1.23.2.19.6.1.1.3 | NetNumber | read-only | The IPX network number of this node. |
| INT nlspNodeType | 1.3.6.1.4.1.23.2.19.6.1.1.4 | INTEGER | read-only | The type of system the node represents. |
| INT nlspNodeEstDelay | 1.3.6.1.4.1.23.2.19.6.1.1.5 | INTEGER | read-only | The estimated delay, in milliseconds, to reach the destination represented by this node. |
| INT nlspNodeEstThroughput | 1.3.6.1.4.1.23.2.19.6.1.1.6 | INTEGER | read-only | The estimated throughput, in bits per second, to the destination represented by this node. |
| INT nlspNodeMaxPacketSize | 1.3.6.1.4.1.23.2.19.6.1.1.7 | INTEGER | read-only | The maximum packet size, in bytes, that can be sent to the destination represented by this node. |
| INT nlspNodeCost | 1.3.6.1.4.1.23.2.19.6.1.1.8 | INTEGER | read-only | The cost to reach this node. |
| INT nlspNodeOverload | 1.3.6.1.4.1.23.2.19.6.1.1.9 | INTEGER | read-only | Indicates whether this node is overloaded. |
| INT nlspNodeReachable | 1.3.6.1.4.1.23.2.19.6.1.1.10 | INTEGER | read-only | Indicates whether the destination represented by this node is reachable. |
| nlspLinkTable | 1.3.6.1.4.1.23.2.19.6.2 | not-accessible | The Link table contains entries for all of the links in the graph. | |
| nlspLinkEntry | 1.3.6.1.4.1.23.2.19.6.2.1 | not-accessible | Each entry corresponds to one link. | |
| INT nlspLinkSysInstance | 1.3.6.1.4.1.23.2.19.6.2.1.1 | INTEGER | read-only | The unique identifier of the instance of NLSP and IPX (via ipxSysInstance) to which this row corresponds. |
| NLS nlspLinkNLSPID | 1.3.6.1.4.1.23.2.19.6.2.1.2 | NLSPID | read-only | The NLSP ID (6-byte system ID plus 1-octet pseudo-node ID) of the node to which this link belongs. |
| INT nlspLinkIndex | 1.3.6.1.4.1.23.2.19.6.2.1.3 | INTEGER | read-only | The unique value identifying the link within the node. |
| NLS nlspLinkNeighNLSPID | 1.3.6.1.4.1.23.2.19.6.2.1.4 | NLSPID | read-only | The NLSP ID (6-byte system ID plus 1-octet pseudo-node ID) of the neighboring node. |
| INT nlspLinkFromNeighCost | 1.3.6.1.4.1.23.2.19.6.2.1.5 | INTEGER | read-only | The cost to use this link to reach this node from the neighboring node. |
| INT nlspLinkMaxPacketSize | 1.3.6.1.4.1.23.2.19.6.2.1.6 | INTEGER | read-only | The maximum size, in bytes, of a packet that may be sent over this link. |
| INT nlspLinkThroughput | 1.3.6.1.4.1.23.2.19.6.2.1.7 | INTEGER | read-only | The link's maximum throughput, in bits per second. |
| INT nlspLinkDelay | 1.3.6.1.4.1.23.2.19.6.2.1.8 | INTEGER | read-only | The delay, in milliseconds, on this link. |
| OCT nlspLinkMediaType | 1.3.6.1.4.1.23.2.19.6.2.1.9 | OCTET STRING | read-only | The media type of this link. |
| INT nlspLinkToNeighCost | 1.3.6.1.4.1.23.2.19.6.2.1.10 | INTEGER | read-only | The cost to use this link to reach the neighbor from this node. |
| nlspPathTable | 1.3.6.1.4.1.23.2.19.6.3 | not-accessible | The path table. | |
| nlspPathEntry | 1.3.6.1.4.1.23.2.19.6.3.1 | not-accessible | Each row in this table represents a link to a node that is one hop closer to the source and would be used for the minimum cost path(s) to reach the destination. | |
| INT nlspPathSysInstance | 1.3.6.1.4.1.23.2.19.6.3.1.1 | INTEGER | read-only | The unique identifier of the instance of NLSP and IPX (via ipxSysInstance) to which this row corresponds. |
| NLS nlspPathDestNLSPID | 1.3.6.1.4.1.23.2.19.6.3.1.2 | NLSPID | read-only | The NLSP ID (6-octet system ID plus 1-octet pseudo-node ID) of this destination. |
| INT nlspPathLinkIndex | 1.3.6.1.4.1.23.2.19.6.3.1.3 | INTEGER | read-only | The unique value identifying this link within the destination node. |
| nlspGraphXRouteTable | 1.3.6.1.4.1.23.2.19.6.4 | not-accessible | This table contains the information about the XRoutes associated with a node in the graph. | |
| nlspGraphXRouteEntry | 1.3.6.1.4.1.23.2.19.6.4.1 | not-accessible | Each entry in the table contains the information for one XRoute associated with the node. | |
| INT nlspGraphXRouteSysInstance | 1.3.6.1.4.1.23.2.19.6.4.1.1 | INTEGER | read-only | The unique identifier of the instance of NLSP and IPX (via ipxSysInstance) to which this entry corresponds. |
| NLS nlspGraphXRouteNLSPID | 1.3.6.1.4.1.23.2.19.6.4.1.2 | NLSPID | read-only | The NLSP ID of the node. |
| NET nlspGraphXRouteNetNum | 1.3.6.1.4.1.23.2.19.6.4.1.3 | NetNumber | read-only | The IPX network number of the XRoute's destination. |
| INT nlspGraphXRouteCost | 1.3.6.1.4.1.23.2.19.6.4.1.4 | INTEGER | read-only | The cost to reach the XRoute's destination. |
| INT nlspGraphXRouteHopCount | 1.3.6.1.4.1.23.2.19.6.4.1.5 | INTEGER | read-only | The number of hops necessary to reach the XRoute's destination. |
| nlspGraphServTable | 1.3.6.1.4.1.23.2.19.6.5 | not-accessible | This table contains the information about the services associated with a node in the graph. | |
| nlspGraphServEntry | 1.3.6.1.4.1.23.2.19.6.5.1 | not-accessible | Each entry in the table contains the information for one service associated with the node. | |
| INT nlspGraphServSysInstance | 1.3.6.1.4.1.23.2.19.6.5.1.1 | INTEGER | read-only | The unique identifier of the instance of NLSP and IPX (via ipxSysInstance) to which this entry corresponds. |
| NLS nlspGraphServNLSPID | 1.3.6.1.4.1.23.2.19.6.5.1.2 | NLSPID | read-only | The NLSP ID of the node. |
| OCT nlspGraphServName | 1.3.6.1.4.1.23.2.19.6.5.1.3 | OCTET STRING | read-only | The service name. |
| OCT nlspGraphServTypeValue | 1.3.6.1.4.1.23.2.19.6.5.1.4 | OCTET STRING | read-only | The service type's hexadecimal value. |
| INT nlspGraphServType | 1.3.6.1.4.1.23.2.19.6.5.1.5 | INTEGER | read-only | The service type. |
| NET nlspGraphServNetNum | 1.3.6.1.4.1.23.2.19.6.5.1.6 | NetNumber | read-only | The IPX network number portion of the IPX address of the service. |
| OCT nlspGraphServNode | 1.3.6.1.4.1.23.2.19.6.5.1.7 | OCTET STRING | read-only | The node portion of the IPX address of the service. |
| OCT nlspGraphServSocket | 1.3.6.1.4.1.23.2.19.6.5.1.8 | OCTET STRING | read-only | The socket portion of the IPX address of the service. |
| nlspLSP | 1.3.6.1.4.1.23.2.19.7 | |||
| nlspLSPTable | 1.3.6.1.4.1.23.2.19.7.1 | not-accessible | The LSP header table. | |
| nlspLSPEntry | 1.3.6.1.4.1.23.2.19.7.1.1 | not-accessible | Each entry corresponds to one LSP's header. | |
| INT nlspLSPSysInstance | 1.3.6.1.4.1.23.2.19.7.1.1.1 | INTEGER | read-only | The unique identifier for the instance of NLSP and IPX (via ipxSysInstance) to which this entry corresponds. |
| OCT nlspLSPID | 1.3.6.1.4.1.23.2.19.7.1.1.2 | OCTET STRING | read-only | The value that uniquely identifies this LSP. |
| INT nlspLSPLifetime | 1.3.6.1.4.1.23.2.19.7.1.1.3 | INTEGER | read-only | The number of seconds prior to the expiration of the LSP. |
| INT nlspLSPSeqNum | 1.3.6.1.4.1.23.2.19.7.1.1.4 | INTEGER | read-only | The sequence number of the LSP. |
| INT nlspLSPChecksum | 1.3.6.1.4.1.23.2.19.7.1.1.5 | INTEGER | read-only | The checksum value of the LSP. |
| INT nlspLSPRouterType | 1.3.6.1.4.1.23.2.19.7.1.1.6 | INTEGER | read-only | The type of the router that sent the LSP. |
| INT nlspLSPOverload | 1.3.6.1.4.1.23.2.19.7.1.1.7 | INTEGER | read-only | Indicates whether the sending router's LSP database is overloaded. |
| OCT nlspLSPHeader | 1.3.6.1.4.1.23.2.19.7.1.1.8 | OCTET STRING | read-only | The complete LSP header. |
| nlspLSPOptTable | 1.3.6.1.4.1.23.2.19.7.2 | not-accessible | The LSP Options table. | |
| nlspLSPOptEntry | 1.3.6.1.4.1.23.2.19.7.2.1 | not-accessible | Each entry corresponds to one option from an LSP. | |
| INT nlspLSPOptSysInstance | 1.3.6.1.4.1.23.2.19.7.2.1.1 | INTEGER | read-only | The unique identifier of the instance of NLSP and IPX (via ipxSysInstance) to which this entry corresponds. |
| OCT nlspLSPOptLSPID | 1.3.6.1.4.1.23.2.19.7.2.1.2 | OCTET STRING | read-only | The value that uniquely identifies the LSP. |
| INT nlspLSPOptIndex | 1.3.6.1.4.1.23.2.19.7.2.1.3 | INTEGER | read-only | The value that uniquely identifies this option within the LSP. |
| INT nlspLSPOptCode | 1.3.6.1.4.1.23.2.19.7.2.1.4 | INTEGER | read-only | The code that identifies the type of the option. |
| INT nlspLSPOptLength | 1.3.6.1.4.1.23.2.19.7.2.1.5 | INTEGER | read-only | The length of the option's value field. |
| OCT nlspLSPOptValue | 1.3.6.1.4.1.23.2.19.7.2.1.6 | OCTET STRING | read-only | The option's value field. |
RFC description
NetWare Link Services Protocol MIB for IPX environments, providing NLSP system, circuit, forwarding, neighbor, and LSP management information.
Start monitoring Router running NLSP (legacy Novell NetWare/IPX environment) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.