NETGEAR-QOS-ISCSI-MIB

All MIBs › NETGEAR-QOS-ISCSI-MIB

Organization: Netgear

Last Updated: 2009-04-30

Description: NETGEAR-QOS-ISCSI-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NETGEAR-QOS-ISCSI-MIB?

NETGEAR-QOS-ISCSI-MIB is a private Netgear MIB for the iSCSI Flow Acceleration QoS feature, which automatically detects iSCSI storage traffic and applies prioritized QoS marking (802.1p or DSCP) to it. It exposes global settings such as feature enable state, aging timeout, and QoS type/value to apply, along with a per-target configuration table identifying iSCSI targets by TCP port, IP address, and target name. Its monitoring value lies in confirming that iSCSI storage traffic is being correctly identified and prioritized, which is important for detecting storage performance issues caused by iSCSI traffic not receiving the QoS treatment it needs on a converged network. It builds on standard 802.1p/DSCP QoS marking concepts applied specifically to iSCSI flow detection. It is deployed on Netgear switches used in converged storage/networking environments serving iSCSI-based SAN traffic. Engineers can download the NETGEAR-QOS-ISCSI-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NETGEAR-QOS-ISCSI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Netgear switch with iSCSI Flow Acceleration support

Monitoring Examples

An administrator would check agentIscsiFlowAccelerationEnable and agentIscsiFlowAccelerationQosType/QosDscpValue to confirm iSCSI acceleration is active and using the expected DSCP marking, then review agentIscsiFlowAccelerationTargetConfigTable/Entry to verify each iSCSI target's agentIscsiFlowAccelerationTargetConfigAddr and agentIscsiFlowAccelerationTargetConfigTcpPort are correctly registered. If storage performance degrades, checking agentIscsiFlowAccelerationAgingTimeOut helps determine whether flow entries are expiring too quickly and losing their QoS marking. A missing or misconfigured target entry would explain why a particular iSCSI target's traffic isn't being accelerated.

What Can Be Monitored

iSCSI acceleration enable state
QoS marking type and value (VPT/DSCP)
configured iSCSI target IP/port/name
flow aging timeout

Imported Objects

From FASTPATH-QOS-MIB

fastPathQOS

MODULE-IDENTITY

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
fastPathIscsiFlowAcceleration	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5			The MIB definitions for Quality of Service - iSCSI Flow Acceleration Flex package.
agentIscsiFlowAccelerationGlobalConfigGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.1
T/F agentIscsiFlowAccelerationEnable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.1.1	TruthValue	read-write	Enable/Disable iSCSI Flow Acceleration globally on the system.
INT agentIscsiFlowAccelerationAgingTimeOut	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.1.2	INTEGER	read-write	The time in seconds that should pass before session is aged out after the last frame detected for the session.
QOS agentIscsiFlowAccelerationQosType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.1.3	QosType	read-write	Current type of QoS for iSCSI packets
U32 agentIscsiFlowAccelerationQosVptValue	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.1.4	Unsigned32	read-write	The value of VPT or DSCP, depends on agentIscsiFlowAccelerationQosType, that will be assigned to each iSCSI packet. The range of VPT value is 0..7
U32 agentIscsiFlowAccelerationQosDscpValue	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.1.5	Unsigned32	read-write	The value of VPT or DSCP, depends on agentIscsiFlowAccelerationQosType, that will be assigned to each iSCSI packet. The range of DSCP value is 0..63
T/F agentIscsiFlowAccelerationQosRemark	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.1.6	TruthValue	read-write	Whether iSCSI frames with the configured VPT or DSCP when egressing the switch.
agentIscsiFlowAccelerationTargetConfigTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.2		not-accessible	The table for configuration of iSCSI target TCP port number, IP address, and name. It is indexed by agentIscsiFlowAccelerationTargetConfigTcpPort and agentIscsiFlowAccelerationTargetConfigAddr.
agentIscsiFlowAccelerationTargetConfigEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.2.1		not-accessible	Row in the iSCSI Target configuration table.
U32 agentIscsiFlowAccelerationTargetConfigTcpPort	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.2.1.1	Unsigned32	not-accessible	The TCP port of configured target.
IP agentIscsiFlowAccelerationTargetConfigAddr	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.2.1.2	IpAddress	not-accessible	Specifies the target address. If the target address is to be ignored the address should be 0.0.0.0.
STR agentIscsiFlowAccelerationTargetConfigName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.2.1.3	DisplayString	read-create	The target IQN name. This text is not used to match on network traffic. It serves as an identifying comment for administrative convenience.
ROW agentIscsiFlowAccelerationTargetConfigStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.2.1.4	RowStatus	read-create	The status of the target. It's used to add/delete a target. active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
agentIscsiFlowAccelerationSessionTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.3		not-accessible	A table that contains iSCSI sessions. It is indexed as assigned by system.
agentIscsiFlowAccelerationSessionEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.3.1		not-accessible	An entry in the agentIscsiFlowAccelerationSessionTable.
U32 agentIscsiFlowAccelerationSessionIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.3.1.1	Unsigned32	not-accessible	Numerical index of session table entry assigned by system.
STR agentIscsiFlowAccelerationTargetName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.3.1.2	DisplayString	read-only	The target name
STR agentIscsiFlowAccelerationInitiatorName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.3.1.3	DisplayString	read-only	The initiator name
OCT agentIscsiFlowAccelerationSessionISID	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.3.1.4	OCTET STRING	read-only	The ISID of current session.
U32 agentIscsiFlowAccelerationSessAgingTime	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.3.1.5	Unsigned32	read-only	The elapsed time in seconds since the traffic was detected on any connections associated with this session.
U32 agentIscsiFlowAccelerationSessionUpTime	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.3.1.6	Unsigned32	read-only	Time elapsed since the session was detected, in seconds.
agentIscsiFlowAccelerationConnectionTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.4		not-accessible	A table that contains iSCSI connections. It is indexed as assigned by system.
agentIscsiFlowAccelerationConnectionEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.4.1		not-accessible	An entry in the agentIscsiFlowAccelerationConnectionTable.
U32 agentIscsiFlowAccelerationConnectionIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.4.1.1	Unsigned32	not-accessible	Numerical index of connection table entry assigned by system.
IP agentIscsiFlowAccelerationConnectionTargetAddr	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.4.1.2	IpAddress	read-only	The connection target address.
U32 agentIscsiFlowAccelerationConnectionTargetPort	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.4.1.3	Unsigned32	read-only	The TCP port of connection target.
IP agentIscsiFlowAccelerationConnectionInitiatorAddr	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.4.1.4	IpAddress	read-only	The connection initiator address.
U32 agentIscsiFlowAccelerationConnectionInitiatorPort	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.4.1.5	Unsigned32	read-only	The TCP port of connection initiator.
U32 agentIscsiFlowAccelerationConnectionCID	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.4.1.6	Unsigned32	read-only	The iSCSI CID for this connection.
U32 agentIscsiFlowAccelerationConnectionSessionIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.5.4.1.7	Unsigned32	read-only	The index of the session associated with this connection. Refers to the index of agentIscsiFlowAccelerationSessionIndex in agentIscsiFlowAccelerationSessionTable.

RFC description

NETGEAR Quality of Service iSCSI Flow Acceleration for optimized storage traffic.

Start monitoring Netgear switch with iSCSI Flow Acceleration support with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NETGEAR-QOS-ISCSI-MIB

What Is NETGEAR-QOS-ISCSI-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description