NETGEAR-DHCP6SERVER-PRIVATE-MIB

All MIBs › NETGEAR-DHCP6SERVER-PRIVATE-MIB

Organization: Netgear

Last Updated: 2007-05-23

Description: NETGEAR-DHCP6SERVER-PRIVATE-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NETGEAR-DHCP6SERVER-PRIVATE-MIB?

NETGEAR-DHCP6SERVER-PRIVATE-MIB is a Netgear private MIB covering DHCPv6 server and relay functionality on FASTPATH-based switches, allowing the switch's built-in DHCPv6 server/relay agent to be configured via SNMP. It would be expected to expose DHCPv6 service configuration objects such as enable state, address-pool settings, and relay parameters, though no specific object names were provided in the source data. It functions primarily as a network-service software-status MIB, letting an administrator confirm the DHCPv6 server/relay feature is enabled and operating rather than reporting any physical hardware sensor data. It is built on top of the IETF DHCPv6 protocol (RFC 3315) and Netgear's FASTPATH management framework. It is deployed on Netgear FASTPATH switches acting as a DHCPv6 server or relay agent within an IPv6-enabled LAN, monitored through the NETGEAR-DHCP6SERVER-PRIVATE-MIB MIB.

IPNetwork Monitor allows you to monitor SNMP objects defined in NETGEAR-DHCP6SERVER-PRIVATE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Netgear FASTPATH-based managed switch

Monitoring Examples

No sample object names were supplied for this module, so a concrete polling example referencing specific tables cannot be honestly constructed. Based on the module description, it would be used to confirm the DHCPv6 server or relay feature is enabled and to review its configured address pools or relay parameters, but the exact object names are unconfirmed from the available data.

Imported Objects

From IPV6-TC

Ipv6Address
Ipv6AddressIfIdentifier
Ipv6AddressPrefix
Ipv6IfIndex
Ipv6IfIndexOrZero

From Netgear-MIB

ng7000managedswitch

OBJECT-IDENTITY

From RFC1213-MIB

DisplayString
PhysAddress

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

MacAddress
RowPointer
RowStatus
StorageType
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using agentDhcp6ServerMalformedMessagesReceived OID:

Select a Netgear FASTPATH-based managed switch (DHCPv6 server/relay) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type agentDhcp6ServerMalformedMessagesReceived into the Find box to locate it in the OID tree, then select it and click OK. The no. of malformed(truncated or corrupt) messages that have been received by the DHCPv6 server. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
fastPathDHCP6ServerPrivate	1.3.6.1.4.1.4526.10.25			The NETGEAR Private MIB for FASTPATH DHCPv6 Server/Relay
agentDhcp6ServerGroup	1.3.6.1.4.1.4526.10.25.1
INT agentDhcp6ServerAdminMode	1.3.6.1.4.1.4526.10.25.1.1	INTEGER	read-write	Admin-mode of the DHCPv6 Server/Relay.
I32 agentDhcp6ServerRelayOptParm	1.3.6.1.4.1.4526.10.25.1.2	Integer32	read-write	The numeric value for the Relay Agent Information Option to be used by DHCPv6 Server/Relay.
I32 agentDhcp6ServerRelayOptRemoteIdSuboptParm	1.3.6.1.4.1.4526.10.25.1.3	Integer32	read-write	The numeric value for the Relay Agent Information Option Remote-ID Sub-option to be used by DHCPv6 Server/Relay.
STR agentDhcp6ServerDuid	1.3.6.1.4.1.4526.10.25.1.4	DisplayString	read-only	The DHCPv6 Server unique DUID. This value cannot be modified
C32 agentDhcp6ServerMalformedMessagesReceivedEx	1.3.6.1.4.1.4526.10.25.1.5	Counter32	read-only	The no. of malformed(truncated or corrupt) messages that have been received by the DHCPv6 server.
C32 agentDhcp6ServerDiscardedMessages	1.3.6.1.4.1.4526.10.25.1.6	Counter32	read-only	The no. of discarded messages that have been received by the DHCPv6 server.
C32 agentDhcp6ServerSOLICITMessagesReceived	1.3.6.1.4.1.4526.10.25.1.7	Counter32	read-only	The no. of DHCPv6 messages of type SOLICIT that have been received by the DHCPv6 server.
C32 agentDhcp6ServerREQUESTMessagesReceived	1.3.6.1.4.1.4526.10.25.1.8	Counter32	read-only	The no. of DHCPv6 messages of type REQUEST that have been received by the DHCPv6 server.
C32 agentDhcp6ServerCONFIRMMessagesReceived	1.3.6.1.4.1.4526.10.25.1.9	Counter32	read-only	The no. of DHCPv6 messages of type CONFIRM that have been received by the DHCPv6 server.
C32 agentDhcp6ServerRENEWMessagesReceived	1.3.6.1.4.1.4526.10.25.1.10	Counter32	read-only	The no. of DHCPv6 messages of type RENEW that have been received by the DHCPv6 server.
C32 agentDhcp6ServerREBINDMessagesReceived	1.3.6.1.4.1.4526.10.25.1.11	Counter32	read-only	The no. of DHCPv6 messages of type REBIND that have been received by the DHCPv6 server.
C32 agentDhcp6ServerRELEASEMessagesReceived	1.3.6.1.4.1.4526.10.25.1.12	Counter32	read-only	The no. of DHCPv6 messages of type RELEASE that have been received by the DHCPv6 server.
C32 agentDhcp6ServerDECLINEMessagesReceived	1.3.6.1.4.1.4526.10.25.1.13	Counter32	read-only	The no. of DHCPv6 messages of type DECLINE that have been received by the DHCPv6 server.
C32 agentDhcp6ServerINFORMREQMessagesReceived	1.3.6.1.4.1.4526.10.25.1.14	Counter32	read-only	The no. of DHCPv6 messages of type INFORMATION-REQUEST that have been received by the DHCPv6 server.
C32 agentDhcp6ServerRELAYREPLYMessagesReceived	1.3.6.1.4.1.4526.10.25.1.15	Counter32	read-only	The no. of DHCPv6 messages of type RELAY-REPLY that have been received by the DHCPv6 server.
C32 agentDhcp6ServerRELAYFORWMessagesReceived	1.3.6.1.4.1.4526.10.25.1.16	Counter32	read-only	The no. of DHCPv6 messages of type RELAY-FORWARD that have been received by the DHCPv6 server.
C32 agentDhcp6ServerADVERTISEMessagesSent	1.3.6.1.4.1.4526.10.25.1.17	Counter32	read-only	The no. of DHCPv6 messages of type ADVERTISE that have been sent by the DHCPv6 server.
C32 agentDhcp6ServerREPLYMessagesSent	1.3.6.1.4.1.4526.10.25.1.18	Counter32	read-only	The no. of DHCPv6 messages of type REPLY that have been sent by the DHCPv6 server.
C32 agentDhcp6ServerRECONFIGUREMessagesSent	1.3.6.1.4.1.4526.10.25.1.19	Counter32	read-only	The no. of DHCPv6 messages of type RECONFIGURE that have been sent by the DHCPv6 server.
C32 agentDhcp6ServerRELAYREPLYMessagesSent	1.3.6.1.4.1.4526.10.25.1.20	Counter32	read-only	The no. of DHCPv6 messages of type RELAY-REPLY that have been sent by the DHCPv6 server.
C32 agentDhcp6ServerRELAYFORWMessagesSent	1.3.6.1.4.1.4526.10.25.1.21	Counter32	read-only	The no. of DHCPv6 messages of type RELAY-FORWARD that have been sent by the DHCPv6 server.
INT agentDhcp6ServerClearStatistics	1.3.6.1.4.1.4526.10.25.1.22	INTEGER	read-write	Clears the DHCPv6 server statistics.
agentDhcp6ServerPoolConfigGroup	1.3.6.1.4.1.4526.10.25.2
STR agentDhcp6ServerPoolNameCreate	1.3.6.1.4.1.4526.10.25.2.1	DisplayString	read-write	A pool is created by applying write operation on this MIB object and providing a new pool-name. Get operation on this MIB object returns a null-value, as for the purpose of viewing the pool name, the user should perform the traversal of agentDhcp6ServerPoolConfigTable. For this reason the get operation on object agentDhcp6ServerPoolNameCreate becomes insignificant.
agentDhcp6ServerPoolConfigTable	1.3.6.1.4.1.4526.10.25.2.2		not-accessible	A table of the DHCPv6 Server Pool configuration entries.
agentDhcp6ServerPoolConfigEntry	1.3.6.1.4.1.4526.10.25.2.2.1		not-accessible	Represents entry for a DHCPv6 server pool.
U32 agentDhcp6ServerPoolIndex	1.3.6.1.4.1.4526.10.25.2.2.1.1	Unsigned32	read-only	The Pool Index, which 'll be used as index for the PoolConfig Table.
STR agentDhcp6ServerPoolName	1.3.6.1.4.1.4526.10.25.2.2.1.2	DisplayString	read-only	The name of the DHCPv6 pool. This value cannot be modified
INT agentDhcp6ServerPoolType	1.3.6.1.4.1.4526.10.25.2.2.1.3	INTEGER	read-only	This specifies the type of the binding that is associated with this pool.
STR agentDhcp6ServerPoolDnsDomainCreate	1.3.6.1.4.1.4526.10.25.2.2.1.4	DisplayString	read-write	A DNS domain for a pool is created by applying write operation on this MIB object and providing a new DNS domain name. Get operation on this MIB object returns a null-value, as for the purpose of viewing the DNS domain name, the user should perform the traversal of agentDhcp6ServerPoolDnsDomainTable. For this reason the get operation on object agentDhcp6ServerDnsDomainCreate becomes insignificant.
ADR agentDhcp6ServerPoolDnsServerCreate	1.3.6.1.4.1.4526.10.25.2.2.1.5	Ipv6Address	read-write	A DNS server for a pool is created by applying write operation on this MIB object and providing a new DNS server address. Get operation on this MIB object returns a null-value, as for the purpose of viewing the DNS server address, the user should perform the traversal of agentDhcp6ServerPoolDnsServerTable. For this reason the get operation on object agentDhcp6ServerDnsServerCreate becomes insignificant.
ROW agentDhcp6ServerPoolRowStatus	1.3.6.1.4.1.4526.10.25.2.2.1.6	RowStatus	read-write	The row status variable is used according to installation and removal conventions for conceptual rows. When a pool is created by applying write operation on 'agentDhcp6ServerPoolCreateName',row-status becomes 'active'. If row-status for a poolEntry is set to 'destroy', the corresponding pool gets deleted.
agentDhcp6ServerPoolDnsDomainTable	1.3.6.1.4.1.4526.10.25.2.4		not-accessible	A table of the DHCPv6 Server Pool's DNS domain entries.
agentDhcp6ServerPoolDnsDomainEntry	1.3.6.1.4.1.4526.10.25.2.4.1		not-accessible	Represents entry for a DHCPv6 server pool's DNS domains.
U32 agentDhcp6ServerPoolDnsDomainIndex	1.3.6.1.4.1.4526.10.25.2.4.1.1	Unsigned32	read-only	The DNS Domain Index, which will be used as index for the DnsDomain Table.
STR agentDhcp6ServerPoolDnsDomainName	1.3.6.1.4.1.4526.10.25.2.4.1.2	DisplayString	read-only	This specifies a DNS domain name for distribution to a DHCPv6 client.
ROW agentDhcp6ServerPoolDnsDomainRowStatus	1.3.6.1.4.1.4526.10.25.2.4.1.3	RowStatus	read-write	The row status variable is used according to installation and removal conventions for conceptual rows. When a DNS domain is created by applying write operation on 'agentDhcp6ServerDnsDomainCreate', row-status becomes 'active'. If row-status for a DnsDomainEntry is set to 'destroy', the corresponding DNS domain gets deleted.
agentDhcp6ServerPoolDnsServerTable	1.3.6.1.4.1.4526.10.25.2.6		not-accessible	A table of the DHCPv6 Server Pool's DNS server address entries.
agentDhcp6ServerPoolDnsServerEntry	1.3.6.1.4.1.4526.10.25.2.6.1		not-accessible	Represents entry for a DHCPv6 server pool's DNS server addresses.
U32 agentDhcp6ServerPoolDnsServerIndex	1.3.6.1.4.1.4526.10.25.2.6.1.1	Unsigned32	read-only	The DNS Server Index, which will be used as index for the DNS Server Table.
ADR agentDhcp6ServerPoolDnsServerAddress	1.3.6.1.4.1.4526.10.25.2.6.1.2	Ipv6Address	read-only	This specifies a DNS server address for distribution to a DHCPv6 client.
ROW agentDhcp6ServerPoolDnsServerRowStatus	1.3.6.1.4.1.4526.10.25.2.6.1.3	RowStatus	read-write	The row status variable is used according to installation and removal conventions for conceptual rows. When a DNS server is created by applying write operation on 'agentDhcp6ServerDnsServerCreate', row-status becomes 'active'. If row-status for a DnsServerEntry is set to 'destroy', the corresponding DNS server gets deleted.
agentDhcp6ServerPoolAllocationTable	1.3.6.1.4.1.4526.10.25.2.7		not-accessible	A table of the DHCPv6 Server pool's allocation entries, showing prefix delegation specific parameters.
agentDhcp6ServerPoolAllocationEntry	1.3.6.1.4.1.4526.10.25.2.7.1		not-accessible	Represents entry for a DHCPv6 server pool's prefix delegation information.
U32 agentDhcp6ServerPoolAllocationIndex	1.3.6.1.4.1.4526.10.25.2.7.1.1	Unsigned32	read-only	The DNS Server Pool Allocation Index, which will be used as index for the DNS Server Pool Allocation Table.
STR agentDhcp6ServerPoolAllocationClientIdentifier	1.3.6.1.4.1.4526.10.25.2.7.1.2	DisplayString	read-create	It specifies the unique identifier, a.k.a. DUID, (in colon-separated hexadecimal format) of a DHCPv6 client.
ADR agentDhcp6ServerPoolAllocationPrefix	1.3.6.1.4.1.4526.10.25.2.7.1.3	Ipv6AddressPrefix	read-create	The IPv6 address prefix for delegation to DHCPv6 clients.
I32 agentDhcp6ServerPoolAllocationPrefixLength	1.3.6.1.4.1.4526.10.25.2.7.1.4	Integer32	read-create	This specifies the no. of bits that comprise the address-prefix mask length.
STR agentDhcp6ServerPoolAllocationClientName	1.3.6.1.4.1.4526.10.25.2.7.1.5	DisplayString	read-create	It specifies a name for a DHCPv6 client. This name is purely used for internal use, and can be a NULL string.
U32 agentDhcp6ServerPoolAllocationIaid	1.3.6.1.4.1.4526.10.25.2.7.1.6	Unsigned32	read-create	This specifies a identity association ID (IAID) associated with the allocation. It can be set to 0.
U32 agentDhcp6ServerPoolAllocationValidLifetime	1.3.6.1.4.1.4526.10.25.2.7.1.7	Unsigned32	read-create	This specifies the valid lifetime timer interval (in seconds) for the associated allocation. If set to 0, the timer is set to 'infinity'.
U32 agentDhcp6ServerPoolAllocationPreferLifetime	1.3.6.1.4.1.4526.10.25.2.7.1.8	Unsigned32	read-create	This specifies the preferred lifetime timer interval (in seconds) for the associated allocation. If set to 0, the timer is set to 'infinity'. Also, the preferred lifetime value must be less than or equal to the valid lifetime value.
ROW agentDhcp6ServerPoolAllocationRowStatus	1.3.6.1.4.1.4526.10.25.2.7.1.9	RowStatus	read-create	The row status variable is used according to installation and removal conventions for conceptual rows. When an allocation is created, row-status becomes 'active'. If row-status for an allocation is set to 'invalid', the corresponding allocation gets deleted.
agentDhcp6InterfaceGroup	1.3.6.1.4.1.4526.10.25.3
agentDhcp6InterfaceTable	1.3.6.1.4.1.4526.10.25.3.1		not-accessible	A table of the DHCPv6 Server/Relay interface entries.
agentDhcp6InterfaceEntry	1.3.6.1.4.1.4526.10.25.3.1.1		not-accessible	Represents entry for DHCPv6 server or relay functionality on an interface.
IPV agentDhcp6InterfaceIndex	1.3.6.1.4.1.4526.10.25.3.1.1.1	Ipv6IfIndex	not-accessible	This specifies the ifindex of the DHCPv6 interface
INT agentDhcp6InterfaceMode	1.3.6.1.4.1.4526.10.25.3.1.1.2	INTEGER	read-create	This specifies whether an interface is in DHCPv6 Server or Relay mode. Setting the mode to 'disable' (0) effectively un-configures the interface.
STR agentDhcp6InterfaceServerPoolName	1.3.6.1.4.1.4526.10.25.3.1.1.3	DisplayString	read-create	This specifies a DHCPv6 Server pool name, which exists within the agentDhcp6ServerPoolConfigTable. This parameter is only meaningful when the interface is in DHCPv6 server mode.
U32 agentDhcp6InterfaceServerPreference	1.3.6.1.4.1.4526.10.25.3.1.1.4	Unsigned32	read-create	This specifies a DHCPv6 Server preference value, which is used by DHCPv6 clients to choose betweeen servers. This parameter is only meaningful when the interface is in DHCPv6 server mode.
ADR agentDhcp6InterfaceRelayAddress	1.3.6.1.4.1.4526.10.25.3.1.1.5	Ipv6Address	read-create	This specifies the IPv6 address of a DHCPv6 relay server, to which DHCPv6 messages receivd on this interface will be relayed. If this is specified as global IPv6 address, then agentDhcp6ServerInterfaceRelayInterface is not required to be configured. However, if the address is specified as a link-local or multicast address, then agentDhcp6ServerInterfaceRelayInterface is required. This parameter is only meaningful when the interface is in DHCPv6 relay mode.
IPV agentDhcp6InterfaceRelayInterface	1.3.6.1.4.1.4526.10.25.3.1.1.6	Ipv6IfIndexOrZero	read-create	This specifies the IPv6 ifindex of a interface to reach a DHCPv6 relay server, to which DHCPv6 messages received on this interface will be relayed. This parameter is only meaningful when the interface is in DHCPv6 relay mode.
STR agentDhcp6InterfaceRemoteIdentifier	1.3.6.1.4.1.4526.10.25.3.1.1.7	DisplayString	read-create	This specifies the Relay Agent Information Option 'remote-id' sub-option to be attached to DHCPv6 messages being relayed on this interface. There exists a special reserved value of 'duid-ifid', which causes the remote-id value to be derived from the local DHCPv6 Server DUID and the interface ifindex. Otherwise, the string defined here is used as the remote-id value. This parameter is only meaningful when the interface is in DHCPv6 relay mode.
BIT agentDhcp6InterfaceOptionFlags	1.3.6.1.4.1.4526.10.25.3.1.1.8	Bits	read-create	This specifies a bitmask field for various DHCPv6 options. Currently, only the 'rapid-commit' option is available, which is only meaningful when the interface is in DHCPv6 Server mode. Setting this parameter to 0 effectively clears any configured option flags on the interface.
agentDhcp6InterfaceStatsTable	1.3.6.1.4.1.4526.10.25.3.2		not-accessible	A table of the DHCPv6 Server/Relay interface statistics
agentDhcp6InterfaceStatsEntry	1.3.6.1.4.1.4526.10.25.3.2.1		not-accessible	Represents entry for DHCPv6 server or relay statistics on an interface.
IPV agentDhcp6InterfaceStatsIndex	1.3.6.1.4.1.4526.10.25.3.2.1.1	Ipv6IfIndex	not-accessible	This specifies the ifindex of the DHCPv6 interface
C32 agentDhcp6InterfaceMalformedMessagesReceived	1.3.6.1.4.1.4526.10.25.3.2.1.2	Counter32	read-only	The number of malformed (truncated or corrupt) messages that have been received on the interface
C32 agentDhcp6InterfaceDiscardedMessages	1.3.6.1.4.1.4526.10.25.3.2.1.3	Counter32	read-only	The no. of discarded messages on the interface.
C32 agentDhcp6InterfaceSOLICITMessagesReceived	1.3.6.1.4.1.4526.10.25.3.2.1.4	Counter32	read-only	The no. of DHCPv6 messages of type SOLICIT that have been received on the interface.
C32 agentDhcp6InterfaceREQUESTMessagesReceived	1.3.6.1.4.1.4526.10.25.3.2.1.5	Counter32	read-only	The no. of DHCPv6 messages of type REQUEST that have been received on the interface.
C32 agentDhcp6InterfaceCONFIRMMessagesReceived	1.3.6.1.4.1.4526.10.25.3.2.1.6	Counter32	read-only	The no. of DHCPv6 messages of type CONFIRM that have been received on the interface.
C32 agentDhcp6InterfaceRENEWMessagesReceived	1.3.6.1.4.1.4526.10.25.3.2.1.7	Counter32	read-only	The no. of DHCPv6 messages of type RENEW that have been received on the interface.
C32 agentDhcp6InterfaceREBINDMessagesReceived	1.3.6.1.4.1.4526.10.25.3.2.1.8	Counter32	read-only	The no. of DHCPv6 messages of type REBIND that have been received on the interface.
C32 agentDhcp6InterfaceRELEASEMessagesReceived	1.3.6.1.4.1.4526.10.25.3.2.1.9	Counter32	read-only	The no. of DHCPv6 messages of type RELEASE that have been received on the interface.
C32 agentDhcp6InterfaceDECLINEMessagesReceived	1.3.6.1.4.1.4526.10.25.3.2.1.10	Counter32	read-only	The no. of DHCPv6 messages of type DECLINE that have been received on the interface.
C32 agentDhcp6InterfaceINFORMREQMessagesReceived	1.3.6.1.4.1.4526.10.25.3.2.1.11	Counter32	read-only	The no. of DHCPv6 messages of type INFORMATION-REQUEST that have been received on the interface.
C32 agentDhcp6InterfaceRELAYREPLYMessagesReceived	1.3.6.1.4.1.4526.10.25.3.2.1.12	Counter32	read-only	The no. of DHCPv6 messages of type RELAY-REPLY that have been received on the interface.
C32 agentDhcp6InterfaceRELAYFORWMessagesReceived	1.3.6.1.4.1.4526.10.25.3.2.1.13	Counter32	read-only	The no. of DHCPv6 messages of type RELAY-FORWARD that have been received on the interface.
C32 agentDhcp6InterfaceADVERTISEMessagesSent	1.3.6.1.4.1.4526.10.25.3.2.1.14	Counter32	read-only	The no. of DHCPv6 messages of type ADVERTISE that have been sent on the interface.
C32 agentDhcp6InterfaceREPLYMessagesSent	1.3.6.1.4.1.4526.10.25.3.2.1.15	Counter32	read-only	The no. of DHCPv6 messages of type REPLY that have been sent on the interface.
C32 agentDhcp6InterfaceRECONFIGUREMessagesSent	1.3.6.1.4.1.4526.10.25.3.2.1.16	Counter32	read-only	The no. of DHCPv6 messages of type RECONFIGURE that have been sent on the interface.
C32 agentDhcp6InterfaceRELAYREPLYMessagesSent	1.3.6.1.4.1.4526.10.25.3.2.1.17	Counter32	read-only	The no. of DHCPv6 messages of type RELAY-REPLY that have been sent on the interface.
C32 agentDhcp6InterfaceRELAYFORWMessagesSent	1.3.6.1.4.1.4526.10.25.3.2.1.18	Counter32	read-only	The no. of DHCPv6 messages of type RELAY-FORWARD that have been sent on the interface.
INT agentDhcp6InterfaceClearStatistics	1.3.6.1.4.1.4526.10.25.3.2.1.19	INTEGER	read-create	Clears the DHCPv6 statistics on the interface.
agentDhcp6ServerBindingGroup	1.3.6.1.4.1.4526.10.25.4
agentDhcp6ServerBindingTable	1.3.6.1.4.1.4526.10.25.4.1		not-accessible	A table of the DHCPv6 Server's active binding entries.
agentDhcp6ServerBindingEntry	1.3.6.1.4.1.4526.10.25.4.1.1		not-accessible	Represents entry for a DHCPv6 server's active bindings.
U32 agentDhcp6ServerBindingIndex	1.3.6.1.4.1.4526.10.25.4.1.1.1	Unsigned32	read-only	The index of the entry in the list of the DHCPv6 server's active bindings.
ADR agentDhcp6ServerBindingPrefix	1.3.6.1.4.1.4526.10.25.4.1.1.2	Ipv6AddressPrefix	read-only	The IPv6 address prefix delegated to a DHCPv6 client.
I32 agentDhcp6ServerBindingPrefixLength	1.3.6.1.4.1.4526.10.25.4.1.1.3	Integer32	read-only	This specifies the no. of bits that comprise the address-prefix mask length for the delegated prefix.
INT agentDhcp6ServerBindingPrefixType	1.3.6.1.4.1.4526.10.25.4.1.1.4	INTEGER	read-only	This specifies the type of prefix associated with the binding. Currently, only IA_PD type (prefix delegation) is supported.
STR agentDhcp6ServerBindingClientIdentifier	1.3.6.1.4.1.4526.10.25.4.1.1.5	DisplayString	read-only	It specifies the unique identifier, a.k.a. DUID, (in colon-separated hexadecimal format) of a DHCPv6 client.
ADR agentDhcp6ServerBindingClientAddress	1.3.6.1.4.1.4526.10.25.4.1.1.6	Ipv6Address	read-only	It specifies the address for a DHCPv6 client.
IPV agentDhcp6ServerBindingClientInterface	1.3.6.1.4.1.4526.10.25.4.1.1.7	Ipv6IfIndex	read-only	It specifies the interface for a DHCPv6 client.
U32 agentDhcp6ServerBindingIaid	1.3.6.1.4.1.4526.10.25.4.1.1.8	Unsigned32	read-only	This specifies a identity association ID (IAID) associated with the binding.
U32 agentDhcp6ServerBindingValidLifetime	1.3.6.1.4.1.4526.10.25.4.1.1.9	Unsigned32	read-only	This specifies the valid lifetime timer interval (in seconds) for the associated allocation. If set to 0, the timer is set to 'infinity'.
U32 agentDhcp6ServerBindingPreferLifetime	1.3.6.1.4.1.4526.10.25.4.1.1.10	Unsigned32	read-only	This specifies the preferred lifetime timer interval (in seconds) for the associated allocation. If set to 0, the timer is set to 'infinity'. Also, the preferred lifetime value must be less than or equal to the valid lifetime value.
U32 agentDhcp6ServerBindingExpiration	1.3.6.1.4.1.4526.10.25.4.1.1.11	Unsigned32	read-only	This specifies the amount of time (in seconds) for the associated binding to expire.

RFC description

NETGEAR vendor-private MIB for managing DHCPv6 (Dynamic Host Configuration Protocol version 6) server and relay functionality on NETGEAR switches.

Start monitoring Netgear FASTPATH-based managed switch (DHCPv6 server/relay) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NETGEAR-DHCP6SERVER-PRIVATE-MIB

What Is NETGEAR-DHCP6SERVER-PRIVATE-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

How to Use in IPNetwork Monitor

RFC description