All MIBs › Motorola-Cpe-PRIVATE-MIB
Organization: Cambium Networks
Last Updated: 2010-06-29
Category: Wireless/WiFi
Description: Manages Cambium Networks CPE device configuration and subscriber interface status.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Motorola-Cpe-PRIVATE-MIB?
Motorola-Cpe-PRIVATE-MIB is a Cambium Networks (Motorola/Gemtek PMP 320 WiMAX CPE heritage) proprietary MIB configuring subscriber CPE units. Its objects cover reboot-with-response, reboot-required flag, auto-save config/period, WiMAX start/stop, buzzer configuration/disable delay, SNMP read/set community, factory-reset trigger, auto firmware-rollback, firmware-validation time/count, LAN SNMP-access enable, per-modulation (BPSK/QPSK/QAM16/QAM64) dynamic max TX power, SNMP-access-domain enable/IP/netmask, system date, and NTP server enable/address/DHCP-source flag. As a configuration MIB it lets an administrator remotely reboot or factory-reset a CPE and confirm its dynamic transmit-power limits per modulation scheme. It is deployed on Cambium Networks (PMP 320) WiMAX CPE units. Engineers can download the Motorola-Cpe-PRIVATE-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Motorola-Cpe-PRIVATE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cambium Networks PMP 320 WiMAX CPE units
Monitoring Examples
An administrator sets rebootWithResponse to remotely reboot a Cambium PMP 320 CPE and confirm it came back online via the response.
What Can Be Monitored
- CPE configuration, transmit power limits, and NTP sync
This MIB depends on
Related MIBs
Imported Objects
From IF-MIB
| ifAdminStatus | OBJECT-TYPE |
| ifIndex | OBJECT-TYPE |
| ifOperStatus | OBJECT-TYPE |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| RowStatus |
How to Use in IPNetwork Monitor
Example using rebootWithResponse OID:
Select a Cambium Networks (Motorola/Gemtek heritage) PMP 320 WiMAX CPE unit as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rebootWithResponse into the Find box to locate it in the OID tree, then select it and click OK. It reports if reading this OID, rebootRequired(1) indicates a reboot is currently required, else, returns rebootNotRequired(0). On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'rebootNotRequired', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| gemtek | 1.3.6.1.4.1.10529 | |||
| gemtekDevCpe | 1.3.6.1.4.1.10529.300 | PMP 320 CPE MIB tree | ||
| gemtekDevCpeStatus | 1.3.6.1.4.1.10529.300.1 | |||
| wirelessStatus | 1.3.6.1.4.1.10529.300.1.1 | |||
| OCT gemtekDevCpeWimaxRssi | 1.3.6.1.4.1.10529.300.1.1.1 | OCTET STRING | read-only | RSSI Report(dBm) |
| OCT gemtekDevCpeWimaxCinr | 1.3.6.1.4.1.10529.300.1.1.2 | OCTET STRING | read-only | CINR Report(dB) |
| OCT gemtekDevCpeWimaxTxPower | 1.3.6.1.4.1.10529.300.1.1.3 | OCTET STRING | read-only | Tx Power Report(dBm) |
| OCT gemtekDevCpeWimaxMaxTxPower | 1.3.6.1.4.1.10529.300.1.1.4 | OCTET STRING | read-only | MAX Tx Power Report(dBm) |
| OCT gemtekDevCpeWimaxUpLinkModulation | 1.3.6.1.4.1.10529.300.1.1.5 | OCTET STRING | read-only | Up Link Modulation Type : QPSK [CC] 1/2 QPSK [CC] 3/4 16-QAM [CC] 1/2 16-QAM [CC] 3/4 64-QAM [CC] 1/2 64-QAM [CC] 2/3 64-QAM [CC] 3/4 QPSK [BTC] 1/2 QPSK [BTC] 3/4 16-QAM [BTC] 3/5 16-QAM [BTC] 4/5 64-QAM [BTC] 5/8 64-QAM [BTC] 4/5 QPSK [CTC] 1/2 Reserved QPSK [CTC] 3/4 16-QAM [CTC] 1/2 16-QAM [CTC] 3/4 64-QAM [CTC] 1/2 64-QAM [CTC] 2/3 64-QAM [CTC] 3/4 64-QAM [CTC] 5/6 QPSK [ZT CC] 1/2 QPSK [ZT CC] 3/4 16-QAM [ZT CC] 1/2 16-QAM [ZT CC] 3/4 64-QAM [ZT CC] 1/2 64-QAM [ZT CC] 2/3 64-QAM [ZT CC] 3/4 QPSK [LDPC] 1/2 QPSK [LDPC] 2/3 A code QPSK [LDPC] 3/4 A code 16-QAM [LDPC] 1/2 16-QAM [LDPC] 2/3 A code 16-QAM [LDPC] 3/4 A code 64-QAM [LDPC] 1/2 64-QAM [LDPC] 2/3 A code 64-QAM [LDPC] 3/4 A code QPSK [CC with optional interleaver] 1/2 QPSK [CC with optional interleaver] 3/4 16-QAM [CC with optional interleaver] 1/2 16-QAM [CC with optional interleaver] 3/4 64-QAM [CC with optional interleaver] 2/3 64-QAM [CC with optional interleaver] 3/4 QPSK [LDPC] 5/6 16-QAM [LDPC] 5/6 64-QAM [LDPC] 5/6 |
| OCT gemtekDevCpeWimaxDownLinkModulation | 1.3.6.1.4.1.10529.300.1.1.6 | OCTET STRING | read-only | Down Link Modulation Type : QPSK [CC] 1/2 QPSK [CC] 3/4 16-QAM [CC] 1/2 16-QAM [CC] 3/4 64-QAM [CC] 1/2 64-QAM [CC] 2/3 64-QAM [CC] 3/4 QPSK [BTC] 1/2 QPSK [BTC] 3/4 or 2/3 16-QAM [BTC] 3/5 16-QAM [BTC] 4/5 64-QAM [BTC] 2/3 or 5/8 64-QAM [BTC] 5/6 or 4/5 QPSK [CTC] 1/2 Reserved QPSK [CTC] 3/4 16-QAM [CTC] 1/2 16-QAM [CTC] 3/4 64-QAM [CTC] 1/2 64-QAM [CTC] 2/3 64-QAM [CTC] 3/4 64-QAM [CTC] 5/6 QPSK [ZT CC] 1/2 QPSK [ZT CC] 3/4 16-QAM [ZT CC] 1/2 16-QAM [ZT CC] 3/4 64-QAM [ZT CC] 1/2 64-QAM [ZT CC] 2/3 64-QAM [ZT CC] 3/4 QPSK [LDPC] 1/2 QPSK [LDPC] 2/3 A code QPSK [LDPC] 3/4 A code 16-QAM [LDPC] 1/2 16-QAM [LDPC] 2/3 A code 16-QAM [LDPC] 3/4 A code 64-QAM [LDPC] 1/2 64-QAM [LDPC] 2/3 A code 64-QAM [LDPC] 3/4 A code QPSK [LDPC] 2/3 B code QPSK [LDPC] 3/4 B code 16-QAM [LDPC] 2/3 B code 16-QAM [LDPC] 3/4 B code 64-QAM [LDPC] 2/3 B code 64-QAM [LDPC] 3/4 B code QPSK [CC with optional interleaver] 1/2 QPSK [CC with optional interleaver] 3/4 16-QAM [CC with optional interleaver] 1/2 16-QAM [CC with optional interleaver] 3/4 64-QAM [CC with optional interleaver] 2/3 64-QAM [CC with optional interleaver] 3/4 QPSK [LDPC] 5/6 16-QAM [LDPC] 5/6 64-QAM [LDPC] 5/6 |
| OCT gemtekDevCpeWimaxBsid | 1.3.6.1.4.1.10529.300.1.1.7 | OCTET STRING | read-only | Base Station MAC Address |
| U32 gemtekDevCpeWimaxFrequency | 1.3.6.1.4.1.10529.300.1.1.8 | Unsigned32 | read-only | Center Frequency (kHz) |
| OCT gemtekDevCpeWimaxUpLinkDataRate | 1.3.6.1.4.1.10529.300.1.1.9 | OCTET STRING | read-only | Up Link Data Rate Report(Kbps) |
| OCT gemtekDevCpeWimaxDownLinkDataRate | 1.3.6.1.4.1.10529.300.1.1.10 | OCTET STRING | read-only | Down Link Data Rate Report(Kbps) |
| U32 gemtekDevCpeWimaxTotalUpLinkDataByte | 1.3.6.1.4.1.10529.300.1.1.11 | Unsigned32 | read-only | Total Up Link Data Bytes Report(Bytes) |
| U32 gemtekDevCpeWimaxTotalDownLinkDataByte | 1.3.6.1.4.1.10529.300.1.1.12 | Unsigned32 | read-only | Total Down Link Data Bytes Report(Bytes) |
| OCT gemtekDevCpeWimaxCpeState | 1.3.6.1.4.1.10529.300.1.1.13 | OCTET STRING | read-only | CPE State |
| OCT gemtekDevCpeWimaxCinrReuse1 | 1.3.6.1.4.1.10529.300.1.1.14 | OCTET STRING | read-only | CINR Reuse1 Report(dB) |
| OCT gemtekDevCpeWimaxCinrReuse3 | 1.3.6.1.4.1.10529.300.1.1.15 | OCTET STRING | read-only | CINR Reuse3 Report(dB) |
| I32 gemtekDevCpeWimaxBandwidth | 1.3.6.1.4.1.10529.300.1.1.16 | Integer32 | read-only | CPE Bandwidth(kHz) |
| OCT gemtekDevCpeWimaxZoneCinrChannelZero | 1.3.6.1.4.1.10529.300.1.1.17 | OCTET STRING | read-only | Zone CINR channel 0 Report(dB) |
| INT gemtekDevCpeWimaxMimoMode | 1.3.6.1.4.1.10529.300.1.1.18 | INTEGER | read-only | MIMO mode status |
| networkStatus | 1.3.6.1.4.1.10529.300.1.2 | |||
| OCT gemtekDevCpeLanMacAddresss | 1.3.6.1.4.1.10529.300.1.2.1 | OCTET STRING | read-only | CPE LAN MAC Address |
| U32 gemtekDevCpeLanTotalDownLinkDataByte | 1.3.6.1.4.1.10529.300.1.2.2 | Unsigned32 | read-only | Total Down Link Data Bytes Report(Bytes) |
| U32 gemtekDevCpeLanTotalUpLinkDataByte | 1.3.6.1.4.1.10529.300.1.2.3 | Unsigned32 | read-only | Total Up Link Data Bytes Report(Bytes) |
| U32 gemtekDevCpeLanTotalDownLinkDataPackets | 1.3.6.1.4.1.10529.300.1.2.4 | Unsigned32 | read-only | LAN Total Down Link Data Packets Report(Packets) |
| U32 gemtekDevCpeLanTotalUpLinkDataPackets | 1.3.6.1.4.1.10529.300.1.2.5 | Unsigned32 | read-only | LAN Total Up Link Data Packets Report(Packets) |
| OCT gemtekDevCpeWanMacAddresss | 1.3.6.1.4.1.10529.300.1.2.6 | OCTET STRING | read-only | CPE WAN MAC Address |
| U32 gemtekDevCpeWanTotalDownLinkDataPackets | 1.3.6.1.4.1.10529.300.1.2.7 | Unsigned32 | read-only | WAN Total Down Link Data Packets Report(Packets) |
| U32 gemtekDevCpeWanTotalUpLinkDataPackets | 1.3.6.1.4.1.10529.300.1.2.8 | Unsigned32 | read-only | WAN Total Up Link Data Packets Report(Packets) |
| deviceStatus | 1.3.6.1.4.1.10529.300.1.3 | |||
| OCT gemtekDevCpeHardwareModel | 1.3.6.1.4.1.10529.300.1.3.1 | OCTET STRING | read-only | Hardware Model of CPE |
| OCT gemtekDevCpeFirmwareVersion | 1.3.6.1.4.1.10529.300.1.3.2 | OCTET STRING | read-only | Firmware Version of CPE |
| OCT gemtekDevCpeFirmwareCreationDate | 1.3.6.1.4.1.10529.300.1.3.3 | OCTET STRING | read-only | Firmware Creation Date |
| OCT gemtekDevCpeFrequencyRange | 1.3.6.1.4.1.10529.300.1.3.4 | OCTET STRING | read-only | Frequency Range of CPE |
| OCT gemtekDevCpeSerialNumber | 1.3.6.1.4.1.10529.300.1.3.5 | OCTET STRING | read-only | Serial Number of CPE |
| OCT gemtekDevCpeLatitude | 1.3.6.1.4.1.10529.300.1.3.6 | OCTET STRING | read-write | CPE Latitude Report |
| OCT gemtekDevCpeLongitude | 1.3.6.1.4.1.10529.300.1.3.7 | OCTET STRING | read-write | CPE Longitude Report |
| OCT gemtekDevCpeHeight | 1.3.6.1.4.1.10529.300.1.3.8 | OCTET STRING | read-write | CPE Height Report |
| OCT gemtekDevCpeMibsVersion | 1.3.6.1.4.1.10529.300.1.3.9 | OCTET STRING | read-only | MIBs Version of CPE |
| OCT gemtekDevCpeBootromVersion | 1.3.6.1.4.1.10529.300.1.3.10 | OCTET STRING | read-only | Bootrom Version of CPE |
| OCT gemtekDevCpeBootromCreationDate | 1.3.6.1.4.1.10529.300.1.3.11 | OCTET STRING | read-only | Bootrom Creation Date |
| OCT gemtekDevCpeProductVersion | 1.3.6.1.4.1.10529.300.1.3.12 | OCTET STRING | read-only | Product Version of CPE |
| gemtekDevCpeControl | 1.3.6.1.4.1.10529.300.2 | |||
| INT rebootWithResponseEx | 1.3.6.1.4.1.10529.300.2.1 | INTEGER | read-write | If reading this OID, rebootRequired(1) indicates a reboot is currently required, else, returns rebootNotRequired(0). |
| INT isRebootRequired | 1.3.6.1.4.1.10529.300.2.2 | INTEGER | read-only | If reading this OID, rebootRequired(1) indicates a reboot is currently required, else, returns rebootNotRequired(0). |
| INT autoSaveConfig | 1.3.6.1.4.1.10529.300.2.3 | INTEGER | read-write | OID to enable/disable the system save to flash automatically. Change setting will save configuraition immediately. Set autoSaveConfig = 0 can save configuraition immediately and don't turn on auto save. |
| U32 autoSavePeriod | 1.3.6.1.4.1.10529.300.2.4 | Unsigned32 | read-write | The variable is deprecated. An OID to set the auto save period in seconds. |
| INT startStopWimax | 1.3.6.1.4.1.10529.300.2.5 | INTEGER | read-write | Start/Stop WiMAX |
| INT snmpBuzzerConfig | 1.3.6.1.4.1.10529.300.2.6 | INTEGER | read-write | OID to enable/disable/demo the system buzzer. |
| U32 snmpBuzzerDisableDelay | 1.3.6.1.4.1.10529.300.2.7 | Unsigned32 | read-write | An OID to set the auto disable the buzzer in how many seconds after CPE operational.(0~1800) |
| OCT gemtekDevCpeSnmpReadCommunity | 1.3.6.1.4.1.10529.300.2.8 | OCTET STRING | read-write | An OID to set/get the SNMP Read community. |
| OCT gemtekDevCpeSnmpSetCommunity | 1.3.6.1.4.1.10529.300.2.9 | OCTET STRING | read-write | An OID to set/get the SNMP Set community. |
| INT gemtekDevCpeRestFactoryDefault | 1.3.6.1.4.1.10529.300.2.10 | INTEGER | read-write | Reset to factory default setting. |
| INT gemtekDevCpeAutoFirmwareRollback | 1.3.6.1.4.1.10529.300.2.11 | INTEGER | read-write | Auto firmware rollback Disable/Level 1/Level 2.(default:Disable) |
| U32 gemtekDevCpeFirmwareValidationTime | 1.3.6.1.4.1.10529.300.2.12 | Unsigned32 | read-write | Auto firmware rollback Level 1: The duration of firmware validation test time(0~99999 seconds). |
| U32 gemtekDevCpeFirmwareValidationCount | 1.3.6.1.4.1.10529.300.2.13 | Unsigned32 | read-write | Auto firmware rollback Level 2: Failure count in firmware validation test(0~999). |
| INT gemtekDevCpeSnmpAccessFromLan | 1.3.6.1.4.1.10529.300.2.14 | INTEGER | read-write | Allow SNMP access from LAN enabled/disabled.(Default:disabled) Setting will take effect immediately. |
| OCT gemtekDevCpeDynamicMaxTxPowerBpsk | 1.3.6.1.4.1.10529.300.2.15 | OCTET STRING | read-only | BPSK Dynamic Max Tx Power(dBm) |
| OCT gemtekDevCpeDynamicMaxTxPowerQpsk | 1.3.6.1.4.1.10529.300.2.16 | OCTET STRING | read-only | QPSK Dynamic Max Tx Power(dBm) |
| OCT gemtekDevCpeDynamicMaxTxPowerQam16 | 1.3.6.1.4.1.10529.300.2.17 | OCTET STRING | read-only | QAM16 Dynamic Max Tx Power(dBm) |
| OCT gemtekDevCpeDynamicMaxTxPowerQam64 | 1.3.6.1.4.1.10529.300.2.18 | OCTET STRING | read-only | QAM64 Dynamic Max Tx Power(dBm) |
| gemtekDevCpeSnmpAccessDomain | 1.3.6.1.4.1.10529.300.2.19 | |||
| INT gemtekDevCpeSnmpAccessDomainEnable | 1.3.6.1.4.1.10529.300.2.19.1 | INTEGER | read-write | Enable/Disable SNMP access domain(Default:Disable) Setting will take effect until save and reboot. |
| IP gemtekDevCpeSnmpAccessDomainIp | 1.3.6.1.4.1.10529.300.2.19.2 | IpAddress | read-write | SNMP access domain IP |
| IP gemtekDevCpeSnmpAccessDomainNetmask | 1.3.6.1.4.1.10529.300.2.19.3 | IpAddress | read-write | SNMP access domain netmask EX: gemtekDevCpeSnmpAccessDomainIp = 192.168.1.1 gemtekDevCpeSnmpAccessDomainNetmask = 255.255.255.0 SNMP access domain = 192.168.1.0 |
| gemtekDevCpeTrap | 1.3.6.1.4.1.10529.300.3 | |||
| gemtekDevCpeTrapServer | 1.3.6.1.4.1.10529.300.3.1 | |||
| INT trapServerEnable | 1.3.6.1.4.1.10529.300.3.1.1 | INTEGER | read-write | Enables/disables trap. Default: Disable |
| IP trapServerIp | 1.3.6.1.4.1.10529.300.3.1.2 | IpAddress | read-write | trap server |
| I32 trapServerPort | 1.3.6.1.4.1.10529.300.3.1.3 | Integer32 | read-write | trap port |
| OCT trapServerCommunity | 1.3.6.1.4.1.10529.300.3.1.4 | OCTET STRING | read-write | trap community |
| gemtekDevCpeTrapPrefix | 1.3.6.1.4.1.10529.300.3.2 | |||
| NTF coldStart | 1.3.6.1.4.1.10529.300.3.2.1 | A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered. | ||
| NTF warmStart | 1.3.6.1.4.1.10529.300.3.2.2 | A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered. | ||
| NTF fatalErrorRestart | 1.3.6.1.4.1.10529.300.3.2.3 | A fatalErrorRestart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that fatal error may have occured. | ||
| NTF linkUp | 1.3.6.1.4.1.10529.300.3.2.4 | A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus. | ||
| NTF notTheHightestPriorityAP | 1.3.6.1.4.1.10529.300.3.2.5 | When the AP preferred selection mode is enabled and the PMP320CPE synchronizes to an AP that is not the highest priority AP in the BSID list, the CPE shall send an SNMP trap after initial service flows and PMP320CPE management IP connectivity are established. | ||
| gemtekDevCpeDate | 1.3.6.1.4.1.10529.300.4 | |||
| OCT gemtekDevCpeSystemDate | 1.3.6.1.4.1.10529.300.4.1 | OCTET STRING | read-only | CPE system Date |
| INT gemtekDevCpeNtpServerEnable | 1.3.6.1.4.1.10529.300.4.2 | INTEGER | read-write | NTP Server Enable/Disable |
| OCT gemtekDevCpeNtpServer | 1.3.6.1.4.1.10529.300.4.3 | OCTET STRING | read-write | NTP Server configuration |
| INT gemtekDevCpeNtpServerFromDHCP | 1.3.6.1.4.1.10529.300.4.4 | INTEGER | read-write | NTP Server From DHCP |
| I32 gemtekDevCpeTimeZone | 1.3.6.1.4.1.10529.300.4.5 | Integer32 | read-write | CPE Time Zone configuration: 0 (GMT-12:00) International Date Line West , 1 (GMT-11:00) Midway Island, Samoa , 2 (GMT-10:00) Hawaii , 3 (GMT-09:00) Alaska , 4 (GMT-08:00) Pacific Time (US and Canada) , 5 (GMT-08:00) Tijuana, Baja California , 6 (GMT-07:00) Arizona , 7 (GMT-07:00) Chihuahua, La Paz, Mazatlan - New , 8 (GMT-07:00) Chihuahua, La Paz, Mazatlan - Old , 9 (GMT-07:00) Mountain Time (US and Canada) , 10 (GMT-06:00) Central America , 11 (GMT-06:00) Central Time (US and Canada) , 12 (GMT-06:00) Guadalajara, Mexico City, Monterrey - New , 13 (GMT-06:00) Guadalajara, Mexico City, Monterrey - Old , 14 (GMT-06:00) Saskatchewan , 15 (GMT-05:00) Bogota, Lima, Quito, Rio Branco , 16 (GMT-05:00) Eastern Time (US and Canada) , 17 (GMT-05:00) Indiana (East) , 18 (GMT-04:30) Caracas , 19 (GMT-04:00) Atlantic Time (Canada) , 20 (GMT-04:00) Caracas, La Paz , 21 (GMT-04:00) Manaus , 22 (GMT-04:00) Santiago , 23 (GMT-03:30) Newfoundland , 24 (GMT-03:00) Brasilia , 25 (GMT-03:00) Buenos Aires, Georgetown , 26 (GMT-03:00) Greenland , 27 (GMT-03:00) Montevideo , 28 (GMT-02:00) Mid-Atlantic , 29 (GMT-01:00) Azores , 30 (GMT-01:00) Cape Verde Is. , 31 (GMT) Casablanca, Monrovia, Reykjavik , 32 (GMT) Greenwich Mean Time - Dublin, Edinburgh, Lisbon, London , 33 (GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna , 34 (GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague , 35 (GMT+01:00) Brussels, Copenhagen, Madrid, Paris , 36 (GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb , 37 (GMT+01:00) West Central Africa , 38 (GMT+02:00) Amman , 39 (GMT+02:00) Athens, Bucharest, Istanbul , 40 (GMT+02:00) Beirut , 41 (GMT+02:00) Cairo , 42 (GMT+02:00) Harare, Pretoria , 43 (GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius , 44 (GMT+02:00) Jerusalem , 45 (GMT+02:00) Minsk , 46 (GMT+02:00) Windhoek , 47 (GMT+03:00) Baghdad , 48 (GMT+03:00) Kuwait, Riyadh , 49 (GMT+03:00) Moscow, St. Petersburg, Volgograd , 50 (GMT+03:00) Nairobi , 51 (GMT+03:00) Tbilisi , 52 (GMT+03:30) Tehran , 53 (GMT+04:00) Abu Dhabi, Muscat , 54 (GMT+04:00) Baku , 55 (GMT+04:00) Caucasus Standard Time , 56 (GMT+04:00) Yerevan , 57 (GMT+04:30) Kabul , 58 (GMT+05:00) Yekaterinburg , 59 (GMT+05:00) Islamabad, Karachi, Tashkent , 60 (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi , 61 (GMT+05:30) Sri Jayawardenapura-Kotte , 62 (GMT+05:45) Kathmandu , 63 (GMT+06:00) Almaty, Novosibirsk , 64 (GMT+06:00) Astana, Dhaka , 65 (GMT+06:30) Yangon (Rangoon) , 66 (GMT+07:00) Bangkok, Hanoi, Jakarta , 67 (GMT+07:00) Krasnoyarsk , 68 (GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi , 69 (GMT+08:00) Irkutsk, Ulaan Bataar , 70 (GMT+08:00) Kuala Lumpur, Singapore , 71 (GMT+08:00) Perth , 72 (GMT+08:00) Taipei , 73 (GMT+09:00) Osaka, Sapporo, Tokyo , 74 (GMT+09:00) Seoul , 75 (GMT+09:00) Yakutsk , 76 (GMT+09:30) Adelaide , 77 (GMT+09:30) Darwin , 78 (GMT+10:00) Brisbane , 79 (GMT+10:00) Canberra, Melbourne, Sydney , 80 (GMT+10:00) Guam, Port Moresby , 81 (GMT+10:00) Hobart , 82 (GMT+10:00) Vladivostok , 83 (GMT+11:00) Magadan, Solomon Is., New Caledonia , 84 (GMT+12:00) Auckland, Wellington , 85 (GMT+12:00) Fiji, Kamchatka, Marshall Is. , 86 (GMT+13:00) Nuku`alofa |
| INT gemtekDevCpeDaylightSaving | 1.3.6.1.4.1.10529.300.4.6 | INTEGER | read-write | Daylight Saving Enable configuration |
| gemtekDevCpeAccountManagement | 1.3.6.1.4.1.10529.300.5 | |||
| OCT administratorUsername | 1.3.6.1.4.1.10529.300.5.1 | OCTET STRING | read-write | set/get WEB administrator username |
| OCT administratorPassword | 1.3.6.1.4.1.10529.300.5.2 | OCTET STRING | read-write | set-only WEB administrator password |
| INT administratorEnable | 1.3.6.1.4.1.10529.300.5.3 | INTEGER | read-write | set/get WEB administrator eabled/disabled |
| OCT operatorUsername | 1.3.6.1.4.1.10529.300.5.4 | OCTET STRING | read-write | set/get WEB operator username |
| OCT operatorPassword | 1.3.6.1.4.1.10529.300.5.5 | OCTET STRING | read-write | set-only WEB operator password |
| INT operatorEnable | 1.3.6.1.4.1.10529.300.5.6 | INTEGER | read-write | set/get WEB operator eabled/disabled |
| OCT adminUsername | 1.3.6.1.4.1.10529.300.5.7 | OCTET STRING | read-write | set/get WEB admin username |
| OCT adminPassword | 1.3.6.1.4.1.10529.300.5.8 | OCTET STRING | read-write | set-only WEB admin password |
| INT adminEnable | 1.3.6.1.4.1.10529.300.5.9 | INTEGER | read-write | set/get WEB admin eabled/disabled |
| gemtekDevCpeScanner | 1.3.6.1.4.1.10529.300.6 | |||
| INT gemtekDevCpeChannelBandwidthRang | 1.3.6.1.4.1.10529.300.6.1 | INTEGER | read-write | No function for this OID since f03b00-5.8.8Moto Select the Channel Bandwidth Rang. 0: threeToFive 3MHz ~ 5MHz => 3MHz, 3.5MHz, 5MHz 1: sixToTen 6MHz ~ 10MHz => 6MHz, 7MHz, 8.75MHz, 10MHz |
| INT gemtekDevCpeChannelApplyLoadOrSave | 1.3.6.1.4.1.10529.300.6.2 | INTEGER | read-write | Channel Scanner Setting load or save (defualut:0). Saved channel Table will take effect until reboot. |
| gemtekDevCpeChannelTable | 1.3.6.1.4.1.10529.300.6.3 | not-accessible | Channel Table | |
| gemtekDevCpeChannelEntry | 1.3.6.1.4.1.10529.300.6.3.1 | not-accessible | Channel Entry | |
| I32 gemtekDevCpeChannelIndex | 1.3.6.1.4.1.10529.300.6.3.1.1 | Integer32 | read-only | Channel Index |
| INT gemtekDevCpeChannelActive | 1.3.6.1.4.1.10529.300.6.3.1.2 | INTEGER | read-only | Channel Active/Disactive |
| U32 gemtekDevCpeChannelFrequency | 1.3.6.1.4.1.10529.300.6.3.1.3 | Unsigned32 | read-create | Channel Frequency configuration (kHz) |
| I32 gemtekDevCpeChannelBandwidth | 1.3.6.1.4.1.10529.300.6.3.1.4 | Integer32 | read-create | Channel Bandwidth configuration(kHz) 3.5MHz = 3500kHz 5MHz = 5000kHz 7MHz = 7000kHz 10MHz = 10000kHz |
| OCT gemtekDevCpeChannelRssi | 1.3.6.1.4.1.10529.300.6.3.1.5 | OCTET STRING | read-only | Channel RSSI (dBm) |
| OCT gemtekDevCpeChannelCinr | 1.3.6.1.4.1.10529.300.6.3.1.6 | OCTET STRING | read-only | Channel CINR(dB) |
| INT gemtekDevCpeChannelEntryEnable | 1.3.6.1.4.1.10529.300.6.3.1.7 | INTEGER | read-create | Channel Entry Enable(Disable/Enable) |
| ROW gemtekDevCpeChannelRowstatus | 1.3.6.1.4.1.10529.300.6.3.1.8 | RowStatus | read-create | active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row. |
| OCT gemtekDevCpeChannelBsId | 1.3.6.1.4.1.10529.300.6.3.1.9 | OCTET STRING | read-only | Channel Bs Id |
| OCT gemtekDevCpeChannelPreambelIndex | 1.3.6.1.4.1.10529.300.6.3.1.10 | OCTET STRING | read-only | Channel Preamble Index |
| gemtekDevCpeFrequencyRangeSetting | 1.3.6.1.4.1.10529.300.6.4 | |||
| U32 gemtekDevCpeLockFrequencyRangeMin | 1.3.6.1.4.1.10529.300.6.4.1 | Unsigned32 | read-only | CPE lock frequency range Min(kHz) |
| U32 gemtekDevCpeLockFrequencyRangeMax | 1.3.6.1.4.1.10529.300.6.4.2 | Unsigned32 | read-only | CPE lock frequency range Max(kHz) |
| INT gemtekDevCpeLockFrequencyRange | 1.3.6.1.4.1.10529.300.6.4.3 | INTEGER | read-only | Lock/Unlock frequency range state. |
| U32 gemtekDevCpeModelFrequencyRangeMin | 1.3.6.1.4.1.10529.300.6.4.4 | Unsigned32 | read-only | CPE model frequency range Min(kHz) |
| U32 gemtekDevCpeModelFrequencyRangeMax | 1.3.6.1.4.1.10529.300.6.4.5 | Unsigned32 | read-only | CPE Model frequency range Max(kHz) |
| gemtekDevCpeAPPreferredList | 1.3.6.1.4.1.10529.300.6.5 | |||
| INT gemtekDevCpeAPPreferredSelectionEnable | 1.3.6.1.4.1.10529.300.6.5.1 | INTEGER | read-write | AP Preferred Selection eabled/disabled |
| INT gemtekDevCpeAPPreferredBsIdListLocked | 1.3.6.1.4.1.10529.300.6.5.2 | INTEGER | read-write | Configured BsId List Locked eabled/disabled |
| OCT gemtekDevCpeAPPreferredPriorityOneBsId | 1.3.6.1.4.1.10529.300.6.5.3 | OCTET STRING | read-write | Priority 1 BsId Address |
| OCT gemtekDevCpeAPPreferredPriorityTwoBsId | 1.3.6.1.4.1.10529.300.6.5.4 | OCTET STRING | read-write | Priority 2 BsId Address |
| OCT gemtekDevCpeAPPreferredPriorityThreeBsId | 1.3.6.1.4.1.10529.300.6.5.5 | OCTET STRING | read-write | Priority 3 BsId Address |
| OCT gemtekDevCpeAPPreferredPriorityFourBsId | 1.3.6.1.4.1.10529.300.6.5.6 | OCTET STRING | read-write | Priority 4 BsId Address |
| gemtekDevCpeAuthentication | 1.3.6.1.4.1.10529.300.7 | |||
| INT gemtekDevCpeAuthenticationSelectionPhase1 | 1.3.6.1.4.1.10529.300.7.1 | INTEGER | read-write | Authentication Selection Phase1(None/EAP-TLS/EAP-TTLS) EAP-TLS needs at least one Device certificate file. Please upload a device certificate file to CPE then you can set EAP-TLS. |
| INT eapIdentityType | 1.3.6.1.4.1.10529.300.7.2 | INTEGER | read-write | EAP-TLS/EAP-TTLS Identity type 0: no Identity(Use realm) 1: manaul Identity 2: random Identity |
| INT eapIdentityUseRealm | 1.3.6.1.4.1.10529.300.7.3 | INTEGER | read-write | EAP-TLS/EAP-TTLS Identity use realm Enable/Disable |
| OCT eapIdentityString | 1.3.6.1.4.1.10529.300.7.4 | OCTET STRING | read-write | EAP-TLS/EAP-TTLS Identity String configuration |
| OCT eapRealmString | 1.3.6.1.4.1.10529.300.7.5 | OCTET STRING | read-write | EAP-TLS/EAP-TTLS Identity String configuration |
| INT eapValidateTheDateDurationOfCaCertificate | 1.3.6.1.4.1.10529.300.7.6 | INTEGER | read-write | EAP-TLS/EAP-TTLS Validate the date duration of CA certificate(Disable/Enable) |
| INT eapValidateTheServerCertificate | 1.3.6.1.4.1.10529.300.7.7 | INTEGER | read-write | EAP-TLS/EAP-TTLS Validate the server certificate(Disable/Enable) It needs at least one CA certificate file. Please upload a CA certificate file to CPE then you can set it enabled. |
| gemtekDevCpeAuthenticationEAPTLS | 1.3.6.1.4.1.10529.300.7.8 | |||
| OCT eapTlsPrivateKeyPassword | 1.3.6.1.4.1.10529.300.7.8.1 | OCTET STRING | read-write | EAP-TLS Private key password |
| gemtekDevCpeAuthenticationEAPTTLS | 1.3.6.1.4.1.10529.300.7.9 | |||
| INT eapTtlsPhase2 | 1.3.6.1.4.1.10529.300.7.9.1 | INTEGER | read-write | EAP-TTLS Phase2(PAP/CHAP/MSCHAP/MSCHAPV2/MD5) |
| OCT eapTtlsUsername | 1.3.6.1.4.1.10529.300.7.9.2 | OCTET STRING | read-write | EAP-TTLS Username |
| OCT eapTtlsPassword | 1.3.6.1.4.1.10529.300.7.9.3 | OCTET STRING | read-write | EAP-TTLS Password |
| INT eapTtlsUseDeviceCertificate | 1.3.6.1.4.1.10529.300.7.9.4 | INTEGER | read-write | EAP-TTLS Use device certificate(Disable/Enable) It needs at least one user certificate file. Please upload a user certificate file to CPE then you can set it enabled. |
| OCT eapTtlsPrivateKeyPassword | 1.3.6.1.4.1.10529.300.7.9.5 | OCTET STRING | read-write | EAP-TTLS Private key password(the same as EAP-TLS). |
| gemtekDevCpeCertificationFileManagement | 1.3.6.1.4.1.10529.300.7.10 | |||
| gemtekDevCpeCertificateUpload | 1.3.6.1.4.1.10529.300.7.10.1 | |||
| OCT gemtekDevCpeCACertificateFileName | 1.3.6.1.4.1.10529.300.7.10.1.1 | OCTET STRING | read-write | specify the CA certificate file name on the FTP server. |
| INT gemtekDevCpeCACertificateFileUpload | 1.3.6.1.4.1.10529.300.7.10.1.2 | INTEGER | read-write | check and upload the CA certificate file. |
| OCT gemtekDevCpeUserCertificateFileName | 1.3.6.1.4.1.10529.300.7.10.1.3 | OCTET STRING | read-write | specify the user certificate file name on the FTP server. |
| INT gemtekDevCpeUserCertificateFileUpload | 1.3.6.1.4.1.10529.300.7.10.1.4 | INTEGER | read-write | check and upload the user certificate file. |
| INT gemtekDevCpeCACertificateFileDelete | 1.3.6.1.4.1.10529.300.7.10.2 | INTEGER | read-write | delete the CA certificate file. Validate the server certificate needs at least one CA certificate file. If you delete all CA certificate files, it will change eapValidateTheServerCertificate to disabled. |
| INT gemtekDevCpeUserCertificateFileDelete | 1.3.6.1.4.1.10529.300.7.10.3 | INTEGER | read-write | delete the user certificate file. EAP-TLS needs at least one device certificate file. If you delete all user certificate files, it will change gemtekDevCpeAuthenticationSelectionPhase1 to EAP-TTLS, and use device certificate disabled. |
| gemtekDevCpeCACertificateFileTable | 1.3.6.1.4.1.10529.300.7.10.4 | not-accessible | CA certificate file table | |
| gemtekDevCpeCACertificateFileEntry | 1.3.6.1.4.1.10529.300.7.10.4.1 | not-accessible | CA certificate file entry | |
| I32 gemtekDevCpeCACertificateIndex | 1.3.6.1.4.1.10529.300.7.10.4.1.1 | Integer32 | read-only | CA certificate file Table Index |
| U32 gemtekDevCpeCACertificateSize | 1.3.6.1.4.1.10529.300.7.10.4.1.2 | Unsigned32 | read-only | CA certificate file size(Byte) |
| OCT gemtekDevCpeCACertificateIssuer | 1.3.6.1.4.1.10529.300.7.10.4.1.3 | OCTET STRING | read-only | CA certificate file issuer |
| OCT gemtekDevCpeCAValidityDateBegin | 1.3.6.1.4.1.10529.300.7.10.4.1.4 | OCTET STRING | read-only | CA certificate file validity date begin |
| OCT gemtekDevCpeCAValidityDateEnd | 1.3.6.1.4.1.10529.300.7.10.4.1.5 | OCTET STRING | read-only | CA certificate file validity date end |
| OCT gemtekDevCpeCACertificateSubject | 1.3.6.1.4.1.10529.300.7.10.4.1.6 | OCTET STRING | read-only | CA certificate file subject |
| gemtekDevCpeUserCertificateFileTable | 1.3.6.1.4.1.10529.300.7.10.5 | not-accessible | User certificate file table | |
| gemtekDevCpeUserCertificateFileEntry | 1.3.6.1.4.1.10529.300.7.10.5.1 | not-accessible | User certificate file entry | |
| I32 gemtekDevCpeUserCertificateIndex | 1.3.6.1.4.1.10529.300.7.10.5.1.1 | Integer32 | read-only | User certificate file Table Index |
| U32 gemtekDevCpeUserCertificateSize | 1.3.6.1.4.1.10529.300.7.10.5.1.2 | Unsigned32 | read-only | User certificate file size(Byte) |
| OCT gemtekDevCpeUserCertificateIssuer | 1.3.6.1.4.1.10529.300.7.10.5.1.3 | OCTET STRING | read-only | User certificate file issuer |
| OCT gemtekDevCpeUserValidityDateBegin | 1.3.6.1.4.1.10529.300.7.10.5.1.4 | OCTET STRING | read-only | User certificate file validity date begin |
| OCT gemtekDevCpeUserValidityDateEnd | 1.3.6.1.4.1.10529.300.7.10.5.1.5 | OCTET STRING | read-only | User certificate file validity date end |
| OCT gemtekDevCpeUserCertificateSubject | 1.3.6.1.4.1.10529.300.7.10.5.1.6 | OCTET STRING | read-only | User certificate file subject |
| gemtekDevCpeNetworkMode | 1.3.6.1.4.1.10529.300.8 | |||
| INT gemtekDevCpeNetoworkOperatingMode | 1.3.6.1.4.1.10529.300.8.1 | INTEGER | read-write | Netowork Operating Mode(Bridge/NAT) |
| gemtekDevCpeBridgeMode | 1.3.6.1.4.1.10529.300.8.2 | |||
| INT gemtekDevCpeBridgeIpType | 1.3.6.1.4.1.10529.300.8.2.1 | INTEGER | read-write | Bridge IP Type(Static/DHCP) |
| IP gemtekDevCpeBridgeIpAddress | 1.3.6.1.4.1.10529.300.8.2.2 | IpAddress | read-write | Bridge Mode Static IP Address configuration |
| IP gemtekDevCpeBridgeNetmask | 1.3.6.1.4.1.10529.300.8.2.3 | IpAddress | read-write | Bridge Mode Static Netmask configuration |
| IP gemtekDevCpeBridgeGateway | 1.3.6.1.4.1.10529.300.8.2.4 | IpAddress | read-write | Bridge Mode Static IP Gateway |
| U32 gemtekDevCpeBridgeDhcpLeaseTime | 1.3.6.1.4.1.10529.300.8.2.5 | Unsigned32 | read-only | Bridge Mode DHCP IP Lease time(sec). |
| U32 gemtekDevCpeBridgeDhcpRenewalTime | 1.3.6.1.4.1.10529.300.8.2.6 | Unsigned32 | read-only | Bridge Mode DHCP IP Renewal time(sec). |
| U32 gemtekDevCpeBridgeDhcpRebindTime | 1.3.6.1.4.1.10529.300.8.2.7 | Unsigned32 | read-only | Bridge Mode DHCP IP Rebind time(sec). |
| gemtekDevCpeMVLAN | 1.3.6.1.4.1.10529.300.8.2.8 | |||
| gemtekDevCpeMgmtVlan | 1.3.6.1.4.1.10529.300.8.2.8.1 | |||
| INT gemtekDevCpeMgmtVlanEnalbe | 1.3.6.1.4.1.10529.300.8.2.8.1.1 | INTEGER | read-write | Management VLAN (Enabled/Disabled) |
| U32 gemtekDevCpeMgmtVlanVid | 1.3.6.1.4.1.10529.300.8.2.8.1.2 | Unsigned32 | read-write | Setting Management VLAN VID(0~4095). |
| U32 gemtekDevCpeMgmtVlanVp | 1.3.6.1.4.1.10529.300.8.2.8.1.3 | Unsigned32 | read-only | Management VLAN VP. |
| gemtekDevCpeDataVlan | 1.3.6.1.4.1.10529.300.8.2.8.2 | |||
| INT gemtekDevCpeDataVlanEnalbe | 1.3.6.1.4.1.10529.300.8.2.8.2.1 | INTEGER | read-write | Data VLAN (Enabled/Disabled) |
| U32 gemtekDevCpeDataVlanVid | 1.3.6.1.4.1.10529.300.8.2.8.2.2 | Unsigned32 | read-write | Setting Data VLAN VID(0~4095). |
| INT gemtekDevCpeAllowPacketType | 1.3.6.1.4.1.10529.300.8.2.8.2.3 | INTEGER | read-write | Data VLN allow packet type |
| gemtekDevCpeVlanMembershipTable | 1.3.6.1.4.1.10529.300.8.2.8.3 | not-accessible | VLAN Membership Table | |
| gemtekDevCpeVlanMembershipEntry | 1.3.6.1.4.1.10529.300.8.2.8.3.1 | not-accessible | VLAN Membership Entry | |
| I32 gemtekDevCpeVlanMembershipIndex | 1.3.6.1.4.1.10529.300.8.2.8.3.1.1 | Integer32 | read-only | VLAN Membership Index |
| U32 gemtekDevCpeVlanMembershipVidBegin | 1.3.6.1.4.1.10529.300.8.2.8.3.1.2 | Unsigned32 | read-create | VLAN Membership VLAN VID Begin(0~4095). |
| U32 gemtekDevCpeVlanMembershipVidEnd | 1.3.6.1.4.1.10529.300.8.2.8.3.1.3 | Unsigned32 | read-create | VLAN Membership VLAN VID End(0~4095). |
| ROW gemtekDevCpeVlanMembershipVidRowstatus | 1.3.6.1.4.1.10529.300.8.2.8.3.1.4 | RowStatus | read-create | active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row. Every row can't overlap(Begin,End). |
| gemtekDevCpeDscpToVp | 1.3.6.1.4.1.10529.300.8.2.8.4 | |||
| OCT gemtekDevCpeDscpToVpMapping | 1.3.6.1.4.1.10529.300.8.2.8.4.1 | OCTET STRING | read-write | DSCP To VP Mapping, CP00~CP63,CP00=0,CP48=6,CP56=7. |
| gemtekDevCpePktCounter | 1.3.6.1.4.1.10529.300.8.2.8.5 | |||
| U32 gemtekDevCpeTaggedPkts | 1.3.6.1.4.1.10529.300.8.2.8.5.1 | Unsigned32 | read-only | CPE tagged packets. |
| INT gemtekDevCpeTaggedPktsReset | 1.3.6.1.4.1.10529.300.8.2.8.5.2 | INTEGER | read-write | Reset CPE tagged packets. |
| U32 gemtekDevCpeUntaggedPkts | 1.3.6.1.4.1.10529.300.8.2.8.5.3 | Unsigned32 | read-only | CPE tagged packets. |
| INT gemtekDevCpeUntaggedPktsReset | 1.3.6.1.4.1.10529.300.8.2.8.5.4 | INTEGER | read-write | Reset CPE untagged packets. |
| U32 gemtekDevCpeNonmemberPkts | 1.3.6.1.4.1.10529.300.8.2.8.5.5 | Unsigned32 | read-only | CPE Non-member packets. |
| INT gemtekDevCpeNonmemberPktsReset | 1.3.6.1.4.1.10529.300.8.2.8.5.6 | INTEGER | read-write | Reset CPE Non-member packets. |
| gemtekDevCpeNatMode | 1.3.6.1.4.1.10529.300.8.3 | |||
| INT gemtekDevCpeNatWanIpType | 1.3.6.1.4.1.10529.300.8.3.1 | INTEGER | read-write | NAT WAN IP Type(Static/DHCP) |
| IP gemtekDevCpeNatWanIpAddress | 1.3.6.1.4.1.10529.300.8.3.2 | IpAddress | read-write | NAT Static WAN IP Address configuration |
| IP gemtekDevCpeNatWanNetmask | 1.3.6.1.4.1.10529.300.8.3.3 | IpAddress | read-write | NAT Static WAN Netmask configuration |
| IP gemtekDevCpeNatWanGateway | 1.3.6.1.4.1.10529.300.8.3.4 | IpAddress | read-write | NAT Static WAN Gateway configuration |
| INT gemtekDevCpeNatLanIpType | 1.3.6.1.4.1.10529.300.8.3.5 | INTEGER | read-only | NAT LAN IP Type(Static/DHCP) |
| IP gemtekDevCpeNatLanIpAddress | 1.3.6.1.4.1.10529.300.8.3.6 | IpAddress | read-write | NAT LAN IP Address configuration |
| IP gemtekDevCpeNatLanNetmask | 1.3.6.1.4.1.10529.300.8.3.7 | IpAddress | read-write | NAT LAN Netmask configuration |
| I32 gemtekDevCpeNatMtu | 1.3.6.1.4.1.10529.300.8.3.8 | Integer32 | read-write | NAT Ethernet MTU size(Default:1476) |
| gemtekDevCpeDhcpServer | 1.3.6.1.4.1.10529.300.8.3.9 | |||
| INT gemtekDevCpeDhcpServerEnable | 1.3.6.1.4.1.10529.300.8.3.9.1 | INTEGER | read-write | DHCP Server Enable/Disable |
| IP gemtekDevCpeDhcpServerStartIp | 1.3.6.1.4.1.10529.300.8.3.9.2 | IpAddress | read-write | DHCP Server Start IP |
| IP gemtekDevCpeDhcpServerEndIp | 1.3.6.1.4.1.10529.300.8.3.9.3 | IpAddress | read-write | DHCP Server End IP |
| IP gemtekDevCpeDhcpServerPrimaryDnsIp | 1.3.6.1.4.1.10529.300.8.3.9.4 | IpAddress | read-write | DHCP Server Primary DNS IP Address configuration |
| INT gemtekDevCpeDhcpServerPrimaryDnsFromIsp | 1.3.6.1.4.1.10529.300.8.3.9.5 | INTEGER | read-write | DHCP Server Primary DNS From ISP Enable/Disable |
| IP gemtekDevCpeDhcpServerSecondDnsIp | 1.3.6.1.4.1.10529.300.8.3.9.6 | IpAddress | read-write | DHCP Server Second DNS IP Address configuration |
| INT gemtekDevCpeDhcpServerSecondDnsFromIsp | 1.3.6.1.4.1.10529.300.8.3.9.7 | INTEGER | read-write | DHCP Server Second DNS From ISP Enable/Disable |
| IP gemtekDevCpeDhcpServerTertiaryDnsIp | 1.3.6.1.4.1.10529.300.8.3.9.8 | IpAddress | read-write | DHCP Server Tertiary DNS IP Address configuration |
| INT gemtekDevCpeDhcpServerTertiaryDnsFromIsp | 1.3.6.1.4.1.10529.300.8.3.9.9 | INTEGER | read-write | DHCP Server Tertiary DNS From ISP Enable/Disable |
| OCT gemtekDevCpeDhcpServerDomainName | 1.3.6.1.4.1.10529.300.8.3.9.10 | OCTET STRING | read-write | DHCP Server Domain Name |
| I32 gemtekDevCpeDhcpServerMaxLeaseTime | 1.3.6.1.4.1.10529.300.8.3.9.11 | Integer32 | read-write | DHCP Server MAX Lease Time |
| gemtekDevCpeDhcpServerPermanentHostTable | 1.3.6.1.4.1.10529.300.8.3.9.12 | not-accessible | DHCP Server Permanent Host Table | |
| gemtekDevCpeDhcpServerPermanentHostEntry | 1.3.6.1.4.1.10529.300.8.3.9.12.1 | not-accessible | DHCP Server Permanent Host Entry | |
| I32 gemtekDevCpeDhcpServerPermanentHostIndex | 1.3.6.1.4.1.10529.300.8.3.9.12.1.1 | Integer32 | read-only | DHCP Server Permanent Host Index |
| OCT gemtekDevCpeDhcpServerPermanentHostMac | 1.3.6.1.4.1.10529.300.8.3.9.12.1.2 | OCTET STRING | read-create | DHCP Server Permanent Host MAC |
| IP gemtekDevCpeDhcpServerPermanentHostIp | 1.3.6.1.4.1.10529.300.8.3.9.12.1.3 | IpAddress | read-create | DHCP Server Permanent Host IP |
| INT gemtekDevCpeDhcpServerPermanentHostEntryEnable | 1.3.6.1.4.1.10529.300.8.3.9.12.1.4 | INTEGER | read-create | DHCP Server Permanent Host Entry Enable/Disable |
| ROW gemtekDevCpeDhcpServerPermanentRowstatus | 1.3.6.1.4.1.10529.300.8.3.9.12.1.5 | RowStatus | read-create | active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row. |
| gemtekDevCpePortForwarding | 1.3.6.1.4.1.10529.300.8.3.10 | |||
| gemtekDevCpePortForwardingTable | 1.3.6.1.4.1.10529.300.8.3.10.1 | not-accessible | Port Forwarding Table | |
| gemtekDevCpePortForwardingEntry | 1.3.6.1.4.1.10529.300.8.3.10.1.1 | not-accessible | Port Forwarding Entry WAN End - WAN Begin=LAN End - LAN Begin, WAN End - WAN Begin 1 WAN End1 LAN End<=65535 | |
| I32 gemtekDevCpePortForwardingIndex | 1.3.6.1.4.1.10529.300.8.3.10.1.1.1 | Integer32 | read-only | Port Forwarding Index |
| I32 gemtekDevCpePortForwardingWanPortBegin | 1.3.6.1.4.1.10529.300.8.3.10.1.1.2 | Integer32 | read-create | Port Forwarding Wan Port Begin |
| I32 gemtekDevCpePortForwardingWanPortEnd | 1.3.6.1.4.1.10529.300.8.3.10.1.1.3 | Integer32 | read-create | Port Forwarding Wan Port End |
| IP gemtekDevCpePortForwardingLanIp | 1.3.6.1.4.1.10529.300.8.3.10.1.1.4 | IpAddress | read-create | Port Forwarding Lan Ip |
| I32 gemtekDevCpePortForwardingLanPortBegin | 1.3.6.1.4.1.10529.300.8.3.10.1.1.5 | Integer32 | read-create | Port Forwarding Lan Port Begin |
| I32 gemtekDevCpePortForwardingLanPortEnd | 1.3.6.1.4.1.10529.300.8.3.10.1.1.6 | Integer32 | read-create | Port Forwarding Lan Port End |
| INT gemtekDevCpePortForwardingProtocol | 1.3.6.1.4.1.10529.300.8.3.10.1.1.7 | INTEGER | read-create | Port Forwarding Entry Protocol |
| INT gemtekDevCpePortForwardingEntryEnable | 1.3.6.1.4.1.10529.300.8.3.10.1.1.8 | INTEGER | read-create | Port Forwarding Entry Enable |
| ROW gemtekDevCpePortForwardingRowstatus | 1.3.6.1.4.1.10529.300.8.3.10.1.1.9 | RowStatus | read-create | active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row. |
| gemtekDevCpePortTrigger | 1.3.6.1.4.1.10529.300.8.3.11 | |||
| gemtekDevCpePortTriggerTable | 1.3.6.1.4.1.10529.300.8.3.11.1 | not-accessible | Port Trigger Table | |
| gemtekDevCpePortTriggerEntry | 1.3.6.1.4.1.10529.300.8.3.11.1.1 | not-accessible | Port Trigger Entry
1<=TriggerPortBegin | |
| I32 gemtekDevCpePortTriggerIndex | 1.3.6.1.4.1.10529.300.8.3.11.1.1.1 | Integer32 | read-only | Port Trigger Index |
| OCT gemtekDevCpePortTriggerName | 1.3.6.1.4.1.10529.300.8.3.11.1.1.2 | OCTET STRING | read-create | Port Trigger Name |
| I32 gemtekDevCpePortTriggerTriggerPortBegin | 1.3.6.1.4.1.10529.300.8.3.11.1.1.3 | Integer32 | read-create | Port Trigger Trigger Port Begin |
| I32 gemtekDevCpePortTriggerTriggerPortEnd | 1.3.6.1.4.1.10529.300.8.3.11.1.1.4 | Integer32 | read-create | Port Trigger Trigger Port End |
| I32 gemtekDevCpePortTriggerForwardingPortBegin | 1.3.6.1.4.1.10529.300.8.3.11.1.1.5 | Integer32 | read-create | Port Trigger Forwarding Port Begin |
| I32 gemtekDevCpePortTriggerForwardingPortEnd | 1.3.6.1.4.1.10529.300.8.3.11.1.1.6 | Integer32 | read-create | Port Trigger Forwarding Port End |
| INT gemtekDevCpePortTriggerProtocol | 1.3.6.1.4.1.10529.300.8.3.11.1.1.7 | INTEGER | read-create | Port Trigger Protocol |
| INT gemtekDevCpePortTriggerEntryEnable | 1.3.6.1.4.1.10529.300.8.3.11.1.1.8 | INTEGER | read-create | Port Trigger Entry Enable |
| ROW gemtekDevCpePortTriggerRowstatus | 1.3.6.1.4.1.10529.300.8.3.11.1.1.9 | RowStatus | read-create | active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row. |
| gemtekDevCpeDhcpClientList | 1.3.6.1.4.1.10529.300.8.3.12 | |||
| gemtekDevCpeDhcpClentListTable | 1.3.6.1.4.1.10529.300.8.3.12.1 | not-accessible | gemtekDevCpeDhcpClentListTable | |
| gemtekDevCpeDhcpClentListEntry | 1.3.6.1.4.1.10529.300.8.3.12.1.1 | not-accessible | gemtekDevCpeDhcpClentListEntry | |
| I32 gemtekDevCpeDhcpClentListIndex | 1.3.6.1.4.1.10529.300.8.3.12.1.1.1 | Integer32 | read-only | DHCP Clent List Index |
| IP gemtekDevCpeDhcpClentListIp | 1.3.6.1.4.1.10529.300.8.3.12.1.1.2 | IpAddress | read-only | DHCP Clent List: IP Address |
| OCT gemtekDevCpeDhcpClentListMacAddress | 1.3.6.1.4.1.10529.300.8.3.12.1.1.3 | OCTET STRING | read-only | DHCP Clent List: MAC Address |
| OCT gemtekDevCpeDhcpClentListExpireTime | 1.3.6.1.4.1.10529.300.8.3.12.1.1.4 | OCTET STRING | read-only | DHCP Clent List: Expire Time |
| gemtekDevCpeDscpConfiguration | 1.3.6.1.4.1.10529.300.8.3.13 | |||
| I32 gemtekDevCpeMgmtDscpId | 1.3.6.1.4.1.10529.300.8.3.13.1 | Integer32 | read-write | MGMT DSCP ID(range:0~63, default:0) |
| INT gemtekDevCpeDropDataPacket | 1.3.6.1.4.1.10529.300.8.3.13.2 | INTEGER | read-write | Drop data packet if its dscp is the same as mgmt Enabled/Disabled(default:Disabled) |
| U32 gemtekDevCpeNatWanDhcpLeaseTime | 1.3.6.1.4.1.10529.300.8.3.14 | Unsigned32 | read-only | NAT Mode DHCP IP Lease time(sec). |
| U32 gemtekDevCpeNatWanDhcpRenewalTime | 1.3.6.1.4.1.10529.300.8.3.15 | Unsigned32 | read-only | NAT Mode DHCP IP Renewal time(sec). |
| U32 gemtekDevCpeNatWanDhcpRebindTime | 1.3.6.1.4.1.10529.300.8.3.16 | Unsigned32 | read-only | NAT Mode DHCP IP Rebind time(sec). |
| gemtekDevCpeNatModeVLAN | 1.3.6.1.4.1.10529.300.8.3.17 | |||
| gemtekDevCpeNatModeMgmtVlan | 1.3.6.1.4.1.10529.300.8.3.17.1 | |||
| INT gemtekDevCpeNatModeMgmtVlanEnalbe | 1.3.6.1.4.1.10529.300.8.3.17.1.1 | INTEGER | read-write | [Nat Mode] Management VLAN (Enabled/Disabled) |
| U32 gemtekDevCpeNatModeMgmtVlanVid | 1.3.6.1.4.1.10529.300.8.3.17.1.2 | Unsigned32 | read-write | [Nat Mode] Setting Management VLAN VID(1~4095). |
| U32 gemtekDevCpeNatModeMgmtVlanVp | 1.3.6.1.4.1.10529.300.8.3.17.1.3 | Unsigned32 | read-write | [Nat Mode] Setting Management VLAN VP(0~7). |
| gemtekDevCpeNatModeDataVlan | 1.3.6.1.4.1.10529.300.8.3.17.2 | |||
| INT gemtekDevCpeNatModeDataVlanEnalbe | 1.3.6.1.4.1.10529.300.8.3.17.2.1 | INTEGER | read-write | [Nat Mode] Data VLAN (Enabled/Disabled) |
| U32 gemtekDevCpeNatModeDataVlanVid | 1.3.6.1.4.1.10529.300.8.3.17.2.2 | Unsigned32 | read-write | [Nat Mode] Setting Data VLAN VID(1~4095). |
| U32 gemtekDevCpeNatModeDataVlanVp | 1.3.6.1.4.1.10529.300.8.3.17.2.3 | Unsigned32 | read-write | [Nat Mode] Setting Data VLAN VP(0~7). |
| gemtekDevCpeFirewall | 1.3.6.1.4.1.10529.300.9 | |||
| INT gemtekDevCpeAllowWebAccessingFromWan | 1.3.6.1.4.1.10529.300.9.1 | INTEGER | read-write | Allow Web Accessing From WAN(disable/enable) |
| INT gemtekDevCpeAllowTelnetAccessingFromWan | 1.3.6.1.4.1.10529.300.9.2 | INTEGER | read-write | Allow Telnet Accessing From WAN(disable/enable) |
| INT gemtekDevCpeDmzEnable | 1.3.6.1.4.1.10529.300.9.3 | INTEGER | read-write | DMZ Enable/Disable |
| IP gemtekDevCpeDmzIpAddress | 1.3.6.1.4.1.10529.300.9.4 | IpAddress | read-write | DMZ IP Address |
| INT gemtekDevCpeRedirectIcmpToTheDmzHostEnable | 1.3.6.1.4.1.10529.300.9.5 | INTEGER | read-write | Redirect ICMP packets to the DMZ host Enable/Disable |
| INT gemtekDevCpeFirewallEnable | 1.3.6.1.4.1.10529.300.9.6 | INTEGER | read-write | Firewall Enable/Disable |
| gemtekDevCpeFirewallTable | 1.3.6.1.4.1.10529.300.9.7 | not-accessible | Firewall Table | |
| gemtekDevCpeFirewallEntry | 1.3.6.1.4.1.10529.300.9.7.1 | not-accessible | Firewall Entry | |
| I32 gemtekDevCpeFirewallIndex | 1.3.6.1.4.1.10529.300.9.7.1.1 | Integer32 | read-only | Firewall Index |
| OCT gemtekDevCpeFirewallName | 1.3.6.1.4.1.10529.300.9.7.1.2 | OCTET STRING | read-create | Firewall Name |
| INT gemtekDevCpeFirewallAction | 1.3.6.1.4.1.10529.300.9.7.1.3 | INTEGER | read-create | Firewall Action(Deny/Allow) |
| INT gemtekDevCpeFirewallInterface | 1.3.6.1.4.1.10529.300.9.7.1.4 | INTEGER | read-create | Firewall Interface(Ethernet/Wimax) |
| INT gemtekDevCpeFirewallProtocol | 1.3.6.1.4.1.10529.300.9.7.1.5 | INTEGER | read-create | Firewall Protocol |
| INT gemtekDevCpeFirewallPriority | 1.3.6.1.4.1.10529.300.9.7.1.6 | INTEGER | read-create | Firewall Entry Priority |
| INT gemtekDevCpeFirewallEntryEnable | 1.3.6.1.4.1.10529.300.9.7.1.7 | INTEGER | read-create | Firewall Entry Enable/Disable |
| OCT gemtekDevCpeFirewallSrcMac | 1.3.6.1.4.1.10529.300.9.7.1.8 | OCTET STRING | read-create | Firewall Source MAC Address |
| OCT gemtekDevCpeFirewallDstMac | 1.3.6.1.4.1.10529.300.9.7.1.9 | OCTET STRING | read-create | Firewall Destination MAC Address |
| IP gemtekDevCpeFirewallSrcIpAddress | 1.3.6.1.4.1.10529.300.9.7.1.10 | IpAddress | read-create | Firewall Source IP Address |
| IP gemtekDevCpeFirewallDstIpAddress | 1.3.6.1.4.1.10529.300.9.7.1.11 | IpAddress | read-create | Firewall Destination IP Address |
| I32 gemtekDevCpeFirewallSrcPortRangeBegin | 1.3.6.1.4.1.10529.300.9.7.1.12 | Integer32 | read-create | Firewall Source Port Range Begin(1~65535) |
| I32 gemtekDevCpeFirewallSrcPortRangeEnd | 1.3.6.1.4.1.10529.300.9.7.1.13 | Integer32 | read-create | Firewall Source Port Range End(1~65535) |
| I32 gemtekDevCpeFirewallDstPortRangeBegin | 1.3.6.1.4.1.10529.300.9.7.1.14 | Integer32 | read-create | Firewall Destination Port Range Begin(1~65535) |
| I32 gemtekDevCpeFirewallDstPortRangeEnd | 1.3.6.1.4.1.10529.300.9.7.1.15 | Integer32 | read-create | Firewall Destination Port Range End(1~65535) |
| ROW gemtekDevCpeFirewallRowstatus | 1.3.6.1.4.1.10529.300.9.7.1.16 | RowStatus | read-create | active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row. |
| INT gemtekDevCpeTelnetEnable | 1.3.6.1.4.1.10529.300.9.8 | INTEGER | read-write | Telnet Enable/Disable |
| INT gemtekDevCpeFirewallEtherTypeFilterOneEnable | 1.3.6.1.4.1.10529.300.9.9 | INTEGER | read-write | Firewall Ether-Type Filter Group One Enable/Disable |
| OCT gemtekDevCpeFirewallEtherTypeFilterOneTypeDeny | 1.3.6.1.4.1.10529.300.9.10 | OCTET STRING | read-write | Firewall Ether-Type Filter Group One Type Deny |
| INT gemtekDevCpeFirewallEtherTypeFilterTwoEnable | 1.3.6.1.4.1.10529.300.9.11 | INTEGER | read-write | Firewall Ether-Type Filter Group Two Enable/Disable |
| OCT gemtekDevCpeFirewallEtherTypeFilterTwoTypeDeny | 1.3.6.1.4.1.10529.300.9.12 | OCTET STRING | read-write | Firewall Ether-Type Filter Group Two Type Deny |
| INT gemtekDevCpeFirewallEtherTypeFilterThreeEnable | 1.3.6.1.4.1.10529.300.9.13 | INTEGER | read-write | Firewall Ether-Type Filter Group Three Enable/Disable |
| OCT gemtekDevCpeFirewallEtherTypeFilterThreeTypeDeny | 1.3.6.1.4.1.10529.300.9.14 | OCTET STRING | read-write | Firewall Ether-Type Filter Group Three Type Deny |
| INT gemtekDevCpeFirewallEtherTypeFilterFourEnable | 1.3.6.1.4.1.10529.300.9.15 | INTEGER | read-write | Firewall Ether-Type Filter Group Four Enable/Disable |
| OCT gemtekDevCpeFirewallEtherTypeFilterFourTypeDeny | 1.3.6.1.4.1.10529.300.9.16 | OCTET STRING | read-write | Firewall Ether-Type Filter Group Four Type Deny |
| INT gemtekDevCpeFirewallEtherTypeFilterFiveEnable | 1.3.6.1.4.1.10529.300.9.17 | INTEGER | read-write | Firewall Ether-Type Filter Group Five Enable/Disable |
| OCT gemtekDevCpeFirewallEtherTypeFilterFiveTypeDeny | 1.3.6.1.4.1.10529.300.9.18 | OCTET STRING | read-write | Firewall Ether-Type Filter Group Five Type Deny |
| INT gemtekDevCpeFirewallPPPoEEnable | 1.3.6.1.4.1.10529.300.9.19 | INTEGER | read-write | PPPoE Enable/Disable (Only allow PPPoE traffic pass through) |
| gemtekDevCpeServiceFlow | 1.3.6.1.4.1.10529.300.11 | |||
| gemtekDevCpeServiceFlowTable | 1.3.6.1.4.1.10529.300.11.1 | not-accessible | gemtekDevCpeServiceFlowTable | |
| gemtekDevCpeServiceFlowEntry | 1.3.6.1.4.1.10529.300.11.1.1 | not-accessible | gemtekDevCpeServiceFlowEntry | |
| I32 gemtekDevCpeServiceFlowIndex | 1.3.6.1.4.1.10529.300.11.1.1.1 | Integer32 | read-only | Service Flow Index |
| U32 gemtekDevCpeServiceFlowSFID | 1.3.6.1.4.1.10529.300.11.1.1.2 | Unsigned32 | read-only | Service Flow SFID |
| U32 gemtekDevCpeServiceFlowCID | 1.3.6.1.4.1.10529.300.11.1.1.3 | Unsigned32 | read-only | Service Flow CID |
| U32 gemtekDevCpeServiceFlowBCID | 1.3.6.1.4.1.10529.300.11.1.1.4 | Unsigned32 | read-only | Service Flow Basic CID |
| INT gemtekDevCpeServiceFlowType | 1.3.6.1.4.1.10529.300.11.1.1.5 | INTEGER | read-only | Service Flow Type: 0:basic 1:primary 2:secondary 3:data 4multicast |
| INT gemtekDevCpeServiceFlowState | 1.3.6.1.4.1.10529.300.11.1.1.6 | INTEGER | read-only | Service Flow State: 0:provisioned 1:admitted 2:active |
| INT gemtekDevCpeServiceFlowDirection | 1.3.6.1.4.1.10529.300.11.1.1.7 | INTEGER | read-only | Service Flow Direction 1:uplink 2:downlink 3:bidirectional |
| INT gemtekDevCpeServiceFlowEnable | 1.3.6.1.4.1.10529.300.11.1.1.8 | INTEGER | read-only | Service Flow Enable/Disable |
| INT gemtekDevCpeServiceFlowScheduling | 1.3.6.1.4.1.10529.300.11.1.1.9 | INTEGER | read-only | Service Flow Scheduling type |
| U32 gemtekDevCpeServiceFlowMaxRate | 1.3.6.1.4.1.10529.300.11.1.1.10 | Unsigned32 | read-only | Service Flow Max Rate(bit/s) |
| INT gemtekDevCpeServiceFlowARQ | 1.3.6.1.4.1.10529.300.11.1.1.11 | INTEGER | read-only | Service Flow ARQ Enable yes/no |
| INT gemtekDevCpeServiceFlowHARQ | 1.3.6.1.4.1.10529.300.11.1.1.12 | INTEGER | read-only | Service Flow HARQ Enable yes/no |
| U32 gemtekDevCpeServiceFlowRules | 1.3.6.1.4.1.10529.300.11.1.1.13 | Unsigned32 | read-only | Service Flow calssifier rule numbers |
| gemtekDevCpeSyslog | 1.3.6.1.4.1.10529.300.12 | |||
| INT gemtekDevCpeSyslogEnable | 1.3.6.1.4.1.10529.300.12.1 | INTEGER | read-write | Send syslog to syslog server enable/disable |
| IP gemtekDevCpeSyslogServerIp | 1.3.6.1.4.1.10529.300.12.2 | IpAddress | read-write | config syslog server IP |
| I32 gemtekDevCpeSyslogServerPort | 1.3.6.1.4.1.10529.300.12.3 | Integer32 | read-create | config syslog server port(1~65535,default:514) |
| gemtekDevCpeMaxTxPower | 1.3.6.1.4.1.10529.300.13 | |||
| INT gemtekDevCpeMaxTxPowerModeSelection | 1.3.6.1.4.1.10529.300.13.1 | INTEGER | read-write | The variable is deprecated. Max Tx Power Mode Selection (RF Mode/EIRP Mode) |
| gemtekDevCpeMaxTxPowerRfMode | 1.3.6.1.4.1.10529.300.13.2 | |||
| U32 gemtekDevCpeRfModeBPSK | 1.3.6.1.4.1.10529.300.13.2.1 | Unsigned32 | read-write | The variable is deprecated. RF Mode BPSK Setting(0~2750) |
| U32 gemtekDevCpeRfModeQPSK | 1.3.6.1.4.1.10529.300.13.2.2 | Unsigned32 | read-write | The variable is deprecated. RF Mode QPSK Setting(0~2750) |
| U32 gemtekDevCpeRfModeQAM16 | 1.3.6.1.4.1.10529.300.13.2.3 | Unsigned32 | read-write | The variable is deprecated. RF Mode QAM16 Setting(0~2750) |
| U32 gemtekDevCpeRfModeQAM64 | 1.3.6.1.4.1.10529.300.13.2.4 | Unsigned32 | read-write | The variable is deprecated. RF Mode QAM64 Setting(0~2450) |
| gemtekDevCpeMaxTxPowerEirpMode | 1.3.6.1.4.1.10529.300.13.3 | |||
| U32 gemtekDevCpeEirpModeAntennaGain | 1.3.6.1.4.1.10529.300.13.3.1 | Unsigned32 | read-write | The variable is deprecated. EIRP Mode Antenna Gain(0~2450) |
| U32 gemtekDevCpeEirpModeBPSK | 1.3.6.1.4.1.10529.300.13.3.2 | Unsigned32 | read-write | The variable is deprecated. EIRP Mode BPSK Setting(0~2750) |
| U32 gemtekDevCpeEirpModeQPSK | 1.3.6.1.4.1.10529.300.13.3.3 | Unsigned32 | read-write | The variable is deprecated. EIRP Mode QPSK Setting(0~2750) |
| U32 gemtekDevCpeEirpModeQAM16 | 1.3.6.1.4.1.10529.300.13.3.4 | Unsigned32 | read-write | The variable is deprecated. EIRP Mode QAM16 Setting(0~2750) |
| U32 gemtekDevCpeEirpModeQAM64 | 1.3.6.1.4.1.10529.300.13.3.5 | Unsigned32 | read-write | The variable is deprecated. EIRP Mode QAM64 Setting(0~2450) |
| gemtekDevCpePullFtpUpgrade | 1.3.6.1.4.1.10529.300.21 | |||
| IP gemtekDevCpePullFtpServerIP | 1.3.6.1.4.1.10529.300.21.1 | IpAddress | read-write | FTP upgrade server IP |
| OCT gemtekDevCpePullFtpServerUserName | 1.3.6.1.4.1.10529.300.21.2 | OCTET STRING | read-write | Ftp Server User Name |
| OCT gemtekDevCpePullFtpServerPassword | 1.3.6.1.4.1.10529.300.21.3 | OCTET STRING | read-write | Ftp Server Password |
| OCT gemtekDevCpePullFtpFilePath | 1.3.6.1.4.1.10529.300.21.4 | OCTET STRING | read-write | Ftp File Path |
| OCT gemtekDevCpePullFtpFileName | 1.3.6.1.4.1.10529.300.21.5 | OCTET STRING | read-write | Ftp File Name |
| INT gemtekDevCpePullFtpUpgradeCmd | 1.3.6.1.4.1.10529.300.21.6 | INTEGER | read-write | Control FTP upgrade |
| INT gemtekDevCpePullFtpUpgradeAdminStatus | 1.3.6.1.4.1.10529.300.21.7 | INTEGER | read-only | Device status information on the progress of the upgrade. |
| gemtekDevCpePushFtpUpgrade | 1.3.6.1.4.1.10529.300.22 | |||
| OCT gemtekDevCpeCurrentSwVersion | 1.3.6.1.4.1.10529.300.22.1 | OCTET STRING | read-only | This value identifies the version of software currently running in the CPE |
| OCT gemtekDevCpePreviousSwVersion | 1.3.6.1.4.1.10529.300.22.2 | OCTET STRING | read-only | This value identifies the previous software version in the CPE |
| OCT gemtekDevCpeDownloadSwVersion | 1.3.6.1.4.1.10529.300.22.3 | OCTET STRING | read-write | This value identifies the version of software to download |
| INT gemtekDevCpePushFtpUpgradeCmd | 1.3.6.1.4.1.10529.300.22.4 | INTEGER | read-write | Control FTP upgrade process |
| INT gemtekDevCpePushFtpUpgradeAdminStatus | 1.3.6.1.4.1.10529.300.22.5 | INTEGER | read-only | Device status information on the progress of the upgrade. |
| gemtekDevCpeTftpUpgrade | 1.3.6.1.4.1.10529.300.69 | |||
| IP gemtekDevCpeTftpServerIP | 1.3.6.1.4.1.10529.300.69.1 | IpAddress | read-write | TFTP upgrade server IP |
| OCT gemtekDevCpeTftpFileName | 1.3.6.1.4.1.10529.300.69.2 | OCTET STRING | read-write | TFTP File Name |
| INT gemtekDevCpeTftpUpgradeCmd | 1.3.6.1.4.1.10529.300.69.3 | INTEGER | read-write | Control TFTP upgrade |
| INT gemtekDevCpeTftpUpgradeAdminStatus | 1.3.6.1.4.1.10529.300.69.4 | INTEGER | read-only | Device status information on the progress of the upgrade. |
RFC description
Manages configuration, status, and control of Cambium Networks PMP 320 CPE devices.
Start monitoring Cambium Networks (Motorola/Gemtek heritage) PMP 320 WiMAX CPE unit with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.