MY-AP-MIB :: myApMaxNumber

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › MY-AP-MIB › myApMaxNumber

myApMaxNumber

Module: MY-AP-MIB

OID (symbolic): MY-AP-MIB::myApMaxNumber

OID (numeric): 1.3.6.1.4.1.171.10.97.2.7.1.1

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: Number of MAX aggreate ports this system supported.

What is myApMaxNumber?

myApMaxNumber reports the maximum number of link-aggregation (trunk) groups that this switch's hardware and software can support. Admins use it as an upper bound before configuring new aggregate ports, since myApConfigNumber and myApPortMemberApNumber values must fall within 1 through this maximum. For example, if myApMaxNumber returns 8, the switch can support at most 8 simultaneous aggregate port groups.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.97.2.7.1.1
snmpwalk -v2c -c public <target> MY-AP-MIB::myApMaxNumber

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.97.2.7.1.1.1
snmpget -v2c -c public <target> MY-AP-MIB::myApMaxNumber.1

Start monitoring D-Link managed Ethernet switch (link aggregation/port trunking) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MY-AP-MIB::myApMaxNumber OID value, configure state conditions and alerts, and monitor any D-Link managed Ethernet switch (link aggregation/port trunking) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.10dlink_productsDES-1226G-MIB
1.3.6.1.4.1.171.10.97switchMibMY-SMI
1.3.6.1.4.1.171.10.97.2myMgmtMY-SMI
Numeric OIDNameModule
1.3.6.1.4.1.171.10.97.2.7myApMIBMY-AP-MIB
1.3.6.1.4.1.171.10.97.2.7.1myApMIBObjectsMY-AP-MIB
1.3.6.1.4.1.171.10.97.2.7.1.1myApMaxNumberMY-AP-MIB