MERAKI-CLOUD-CONTROLLER-MIB

All MIBs › MERAKI-CLOUD-CONTROLLER-MIB

Organization: Meraki, Inc.

Last Updated: 2012-05-24

Category: Wireless/WiFi

Description: Monitors Meraki cloud-managed network device status and connectivity via the Meraki dashboard.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MERAKI-CLOUD-CONTROLLER-MIB?

This is a Cisco Meraki MIB for monitoring cloud-managed network devices via the Meraki dashboard/cloud controller, in the cloud-managed networking technology area. It exposes organization- and network-level identity objects, per-network administrator info, VPN peer relationships, and per-SSID wireless network configuration. Monitoring focus is largely connectivity/configuration status: organizationName and networkTable let an operator inventory which Meraki organizations and networks exist, vpnPeer surfaces site-to-site VPN peer relationships (useful for detecting a downed VPN tunnel), and ssidTable exposes each SSID's name and number to verify wireless configuration consistency across sites. It is a standalone vendor MIB layered on top of the Meraki cloud dashboard's own management model rather than depending on other IETF MIBs. It is deployed across Meraki cloud-managed access points, switches, and security appliances in multi-site enterprise, retail, and branch deployments, and administrators can download the MERAKI-CLOUD-CONTROLLER-MIB file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in MERAKI-CLOUD-CONTROLLER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco Meraki cloud-managed network device (AP/switch/security appliance)

Monitoring Examples

An operator would poll networkTable (indexed by networkId) to confirm each branch's networkName and networkAdmin are correctly registered in the dashboard, and check ssidTable entries (ssidNetworkName, ssidNumber, ssidName) to verify the expected wireless SSIDs are configured consistently across sites. A missing or changed vpnPeer entry would flag an unexpected change in a site-to-site VPN topology.

What Can Be Monitored

organization and network inventory
network administrator assignment
VPN peer relationships
SSID configuration and count

Imported Objects

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From RFC1213-MIB

PhysAddress

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DateAndTime
DisplayString

How to Use in IPNetwork Monitor

Example using devInterfaceSentPkts OID:

Select a Cisco Meraki cloud-managed network device (AP/switch/security appliance) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type devInterfaceSentPkts into the Find box to locate it in the OID tree, then select it and click OK. The number of packets sent on this interface. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
meraki	1.3.6.1.4.1.29671
cloudController	1.3.6.1.4.1.29671.1			Management information base in SMI v2 for the Meraki Cloud Controller.
organization	1.3.6.1.4.1.29671.1.1
STR organizationName	1.3.6.1.4.1.29671.1.1.1	DisplayString	read-only	Organization name.
networkTable	1.3.6.1.4.1.29671.1.1.2		not-accessible	Networks table.
networkEntry	1.3.6.1.4.1.29671.1.1.2.1		not-accessible	Describes each network.
OCT networkId	1.3.6.1.4.1.29671.1.1.2.1.1	OCTET STRING	read-only	Network id, consists of 8 octets. Remains the same even if the name of the network changes
STR networkName	1.3.6.1.4.1.29671.1.1.2.1.2	DisplayString	read-only	Network name.
STR networkAdmin	1.3.6.1.4.1.29671.1.1.2.1.3	DisplayString	read-only	Name and email of a network admin.
IP vpnPeer	1.3.6.1.4.1.29671.1.1.2.1.4	IpAddress	read-only	IP and port of a VPN peer connected to the network.
ssidTable	1.3.6.1.4.1.29671.1.1.3		not-accessible	SSID table.
ssidEntry	1.3.6.1.4.1.29671.1.1.3.1		not-accessible	Describes each SSID.
STR ssidNetworkName	1.3.6.1.4.1.29671.1.1.3.1.1	DisplayString	read-only	The name of the network the SSID is part of.
INT ssidNumber	1.3.6.1.4.1.29671.1.1.3.1.2	INTEGER	read-only	SSID number.
STR ssidName	1.3.6.1.4.1.29671.1.1.3.1.3	DisplayString	read-only	SSID name.
STR userName	1.3.6.1.4.1.29671.1.1.3.1.4	DisplayString	read-only	Name of user connected to SSID.
STR userEmail	1.3.6.1.4.1.29671.1.1.3.1.5	DisplayString	read-only	Email of user connected to SSID.
IP radiusServerIp	1.3.6.1.4.1.29671.1.1.3.1.6	IpAddress	read-only	IP address of RADIUS server used for authentication on an SSID.
IP radiusServerPort	1.3.6.1.4.1.29671.1.1.3.1.7	IpAddress	read-only	Port associated with an IP address of RADIUS server used for authentication on an SSID.
devTable	1.3.6.1.4.1.29671.1.1.4		not-accessible	Device table.
devEntry	1.3.6.1.4.1.29671.1.1.4.1		not-accessible	Describes each device.
PHY devMac	1.3.6.1.4.1.29671.1.1.4.1.1	PhysAddress	read-only	The MAC address of the device.
STR devName	1.3.6.1.4.1.29671.1.1.4.1.2	DisplayString	read-only	Device name.
INT devStatus	1.3.6.1.4.1.29671.1.1.4.1.3	INTEGER	read-only	The status of the device's connection to the Meraki Cloud Controller
DAT devContactedAt	1.3.6.1.4.1.29671.1.1.4.1.4	DateAndTime	read-only	The last time the device contacted the Cloud Controller.
INT devClientCount	1.3.6.1.4.1.29671.1.1.4.1.5	INTEGER	read-only	The number of clients currently associated with the device.
INT devMeshStatus	1.3.6.1.4.1.29671.1.1.4.1.6	INTEGER	read-only	Whether the device is currently acting as a gateway or a repeater.
IP devPublicIp	1.3.6.1.4.1.29671.1.1.4.1.7	IpAddress	read-only	Whether the device is currently acting as a gateway (as opposed to a repeater).
STR devSerial	1.3.6.1.4.1.29671.1.1.4.1.8	DisplayString	read-only	Device serial number.
STR devProductCode	1.3.6.1.4.1.29671.1.1.4.1.9	DisplayString	read-only	Device product code.
STR devProductDescription	1.3.6.1.4.1.29671.1.1.4.1.10	DisplayString	read-only	Device product description.
STR devNetworkName	1.3.6.1.4.1.29671.1.1.4.1.11	DisplayString	read-only	The name of the network this device is in. Useful in tables.
IP devLanIp	1.3.6.1.4.1.29671.1.1.4.1.12	IpAddress	read-only	The LAN IP of the device. Useful for DHCP server alerts.
STR devSubnet	1.3.6.1.4.1.29671.1.1.4.1.13	DisplayString	read-only	The subnet the device is on. Useful for DHCP server alerts.
devInterfaceTable	1.3.6.1.4.1.29671.1.1.5		not-accessible	Device interfaces table.
devInterfaceEntry	1.3.6.1.4.1.29671.1.1.5.1		not-accessible	Describes each device.
PHY devInterfaceDevMac	1.3.6.1.4.1.29671.1.1.5.1.1	PhysAddress	read-only	The MAC address of the device.
INT devInterfaceIndex	1.3.6.1.4.1.29671.1.1.5.1.2	INTEGER	read-only	The index of this interface.
STR devInterfaceName	1.3.6.1.4.1.29671.1.1.5.1.3	DisplayString	read-only	The name of this interface.
C32 devInterfaceSentPktsEx	1.3.6.1.4.1.29671.1.1.5.1.4	Counter32	read-only	The number of packets sent on this interface.
C32 devInterfaceRecvPkts	1.3.6.1.4.1.29671.1.1.5.1.5	Counter32	read-only	The number of packets received on this interface.
C32 devInterfaceSentBytes	1.3.6.1.4.1.29671.1.1.5.1.6	Counter32	read-only	The number of bytes sent on this interface.
C32 devInterfaceRecvBytes	1.3.6.1.4.1.29671.1.1.5.1.7	Counter32	read-only	The number of bytes received on this interface.
STR devInterfaceModel	1.3.6.1.4.1.29671.1.1.5.1.8	DisplayString	read-only	The model of the interface. Useful for cellular interfaces.
STR devInterfaceCarrier	1.3.6.1.4.1.29671.1.1.5.1.9	DisplayString	read-only	The carrier for the interface. Useful for cellular interfaces.
STR devInterfaceDescription	1.3.6.1.4.1.29671.1.1.5.1.10	DisplayString	read-only	Description for the interface. Useful for information about ports
STR devInterfacePortDescription	1.3.6.1.4.1.29671.1.1.5.1.11	DisplayString	read-only	Description for errors occuring on the interface. Useful for information about ports
vlanTable	1.3.6.1.4.1.29671.1.1.6		not-accessible	VLAN table.
vlanEntry	1.3.6.1.4.1.29671.1.1.6.1		not-accessible	Describes each VLAN.
STR vlanNetworkName	1.3.6.1.4.1.29671.1.1.6.1.1	DisplayString	read-only	The name of the network the VLAN is part of.
INT vlanNumber	1.3.6.1.4.1.29671.1.1.6.1.2	INTEGER	read-only	VLAN number.
STR vlanName	1.3.6.1.4.1.29671.1.1.6.1.3	DisplayString	read-only	VLAN name.
traps	1.3.6.1.4.1.29671.1.1.7
NTF testTrap	1.3.6.1.4.1.29671.1.1.7.1			A test trap to verify whether the receiving server is configured correctly. The name of the network where the trap configuration resides will be sent as well.
NTF deviceGoesDownTrap	1.3.6.1.4.1.29671.1.1.7.2			Alert when a device becomes unreachable from the Meraki cloud. The device's mac address is enclosed.
NTF deviceComesOnline	1.3.6.1.4.1.29671.1.1.7.3			Alert when a device reconnects to the Meraki cloud. The device's mac address is enclosed.
NTF foreignAPDetected	1.3.6.1.4.1.29671.1.1.7.4			Alert when an unknown access point appears on the network.
NTF cellularNetworkUp	1.3.6.1.4.1.29671.1.1.7.5			Alert when a network connects to a cellular network.
NTF cellularNetworkDown	1.3.6.1.4.1.29671.1.1.7.6			Alert when a network disconnects from a cellular network.
NTF newDhcpServerAlert	1.3.6.1.4.1.29671.1.1.7.7			Alert when a new dhcp server appears on the network.
NTF noDhcpLeases	1.3.6.1.4.1.29671.1.1.7.8			Alert when DHCP leases are exhausted.
NTF uplinkStatusChanged	1.3.6.1.4.1.29671.1.1.7.9			Alert when an uplink status changes.
NTF unreachableDevicesDetected	1.3.6.1.4.1.29671.1.1.7.10			Unreachable devices have been detected on the network. Adjust firewall settings accordingly.
NTF upcomingFirewallInformationChanges	1.3.6.1.4.1.29671.1.1.7.11			Upcoming firewall information changes. Adjust firewall settings accordingly.
NTF gatewayToRepeater	1.3.6.1.4.1.29671.1.1.7.12			Alert when a gateway becomes a repeater.
NTF ipConflict	1.3.6.1.4.1.29671.1.1.7.13			Alert if a client IP conflict is detected.
NTF newSplashSignup	1.3.6.1.4.1.29671.1.1.7.14			Alert when a new splash user registers to an SSID.
NTF portCableError	1.3.6.1.4.1.29671.1.1.7.15			Alert when a cable error is detected.
NTF portConnected	1.3.6.1.4.1.29671.1.1.7.16			Alert when a switch port is connected.
NTF portDisconnected	1.3.6.1.4.1.29671.1.1.7.17			Alert when a switch port is disconnected.
NTF portSpeedChange	1.3.6.1.4.1.29671.1.1.7.18			Alert when a switch port link speed changed.
NTF rogueDhcpServer	1.3.6.1.4.1.29671.1.1.7.19			Alert when a rogue DHCP server is detected. Contains the mac, IP, subnet and VLAN of the Rogue DHCP server.
NTF settingsChanged	1.3.6.1.4.1.29671.1.1.7.20			Alert when Meraki Dashboard settings are changed. Includes information about the network admin that made the changes.
NTF unreachableRadiusServer	1.3.6.1.4.1.29671.1.1.7.21			Alert when a RADIUS authentication server becomes unreachable. Contains the IP of the RADIUS server, the IP of the Meraki server having trouble connecting to it and the name of the SSID that uses the RADIUS server.
NTF vpnConnectivityChange	1.3.6.1.4.1.29671.1.1.7.22			Alert when VPN connectivity changed. Contains the IP and port of VPN peer, the mac address of the device used to VPN, and the status whether or not the VPN is on or offline
NTF vpnFailoverDetected	1.3.6.1.4.1.29671.1.1.7.23			Alert when a VPN failover is detected.
merakiProducts	1.3.6.1.4.1.29671.2
mini	1.3.6.1.4.1.29671.2.1
id2	1.3.6.1.4.1.29671.2.2
wpg	1.3.6.1.4.1.29671.2.3
od1	1.3.6.1.4.1.29671.2.4
od2	1.3.6.1.4.1.29671.2.5
od3	1.3.6.1.4.1.29671.2.6
mo1	1.3.6.1.4.1.29671.2.7
sol	1.3.6.1.4.1.29671.2.8
lr1	1.3.6.1.4.1.29671.2.9
mr11	1.3.6.1.4.1.29671.2.10
mr12	1.3.6.1.4.1.29671.2.11
mr14	1.3.6.1.4.1.29671.2.12
mr16	1.3.6.1.4.1.29671.2.13
mr24	1.3.6.1.4.1.29671.2.14
mr62	1.3.6.1.4.1.29671.2.15
mr66	1.3.6.1.4.1.29671.2.16
mr34	1.3.6.1.4.1.29671.2.17
mr18	1.3.6.1.4.1.29671.2.18
mr26	1.3.6.1.4.1.29671.2.19
mr32	1.3.6.1.4.1.29671.2.20
mr72	1.3.6.1.4.1.29671.2.21
z1	1.3.6.1.4.1.29671.2.100
mx70	1.3.6.1.4.1.29671.2.101
mx80	1.3.6.1.4.1.29671.2.102
mx90	1.3.6.1.4.1.29671.2.103
mx400	1.3.6.1.4.1.29671.2.104
mx600	1.3.6.1.4.1.29671.2.105
mx100	1.3.6.1.4.1.29671.2.106
mx60	1.3.6.1.4.1.29671.2.107
mx60w	1.3.6.1.4.1.29671.2.108
merakiVM10	1.3.6.1.4.1.29671.2.200
ms22	1.3.6.1.4.1.29671.2.300
ms22p	1.3.6.1.4.1.29671.2.301
ms42	1.3.6.1.4.1.29671.2.302
ms42p	1.3.6.1.4.1.29671.2.303
ms220_8	1.3.6.1.4.1.29671.2.304
ms220_8p	1.3.6.1.4.1.29671.2.305
ms220_24	1.3.6.1.4.1.29671.2.306
ms220_24p	1.3.6.1.4.1.29671.2.307
ms220_48	1.3.6.1.4.1.29671.2.308
ms220_48lp	1.3.6.1.4.1.29671.2.309
ms220_48fp	1.3.6.1.4.1.29671.2.310
ms320_24	1.3.6.1.4.1.29671.2.311
ms320_24p	1.3.6.1.4.1.29671.2.312
ms320_48	1.3.6.1.4.1.29671.2.313
ms320_48lp	1.3.6.1.4.1.29671.2.314
ms320_48fp	1.3.6.1.4.1.29671.2.315
ms420_24	1.3.6.1.4.1.29671.2.316
ms420_48	1.3.6.1.4.1.29671.2.317

RFC description

Manages Meraki cloud-controlled network devices with notifications for device status, alerts, and cellular network events.

Start monitoring Cisco Meraki cloud-managed network device (AP/switch/security appliance) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MERAKI-CLOUD-CONTROLLER-MIB