All MIBs › MX25-OPT-MIB
Category: Optical Networking
Description: Manages MX25 optical interface configuration and optical signal parameters.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is MX25-OPT-MIB?
MX25-OPT-MIB is a vendor MIB (associated with cdx6500-series equipment naming in its objects) for managing MX25 optical interface modules, covering optical interface configuration and signal parameters for the platform's optical transport ports. It exposes protocol-group style objects tied to station-level protocol handling on the associated chassis, alongside optical interface configuration data. Its monitoring purpose centers on optical interface/link status, letting operators check optical signal and protocol-group configuration to detect a misconfigured or degraded optical port, though the module also touches station-protocol status objects tied to the underlying chassis architecture. It appears related to and dependent on the broader cdx6500 platform object naming/enterprise structure referenced in its sample objects, suggesting shared lineage with other station-protocol MIBs for that chassis family. It is deployed on legacy optical/multiplexer transport equipment using the MX25/cdx6500 chassis architecture. Engineers can download the MX25-OPT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in MX25-OPT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- MX25/cdx6500 optical transport chassis
Monitoring Examples
An operator would check cdx6500PCTStationProtocolGroup and cdx6500PSTStationProtocolGroup settings to confirm the station protocol configuration matches the expected optical transport setup for an MX25 port, revealing a protocol mismatch if an optical circuit fails to establish. This kind of station-protocol-group check is typically a first troubleshooting step before examining lower-level optical signal quality on the same port.
What Can Be Monitored
- optical interface configuration
- station protocol group settings
- optical signal parameters
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| enterprises |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| codex | 1.3.6.1.4.1.449 | |||
| cdxProductSpecific | 1.3.6.1.4.1.449.2 | |||
| cdx6500 | 1.3.6.1.4.1.449.2.1 | |||
| cdx6500Configuration | 1.3.6.1.4.1.449.2.1.2 | |||
| cdx6500CfgProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1 | |||
| cdx6500PCTPortProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1.1 | |||
| cdx6500PPCTMX25PortTables | 1.3.6.1.4.1.449.2.1.2.1.1.4 | |||
| cdx6500PPCTMX25PortTable | 1.3.6.1.4.1.449.2.1.2.1.1.4.1 | not-accessible | All of the common configuration parameters relevant to the MX.25 port table. | |
| cdx6500PPCTMX25PortEntry | 1.3.6.1.4.1.449.2.1.2.1.1.4.1.1 | not-accessible | A row of MX.25 Port configuration parameters. | |
| INT cdx6500mx25pCfgPortNum | 1.3.6.1.4.1.449.2.1.2.1.1.4.1.1.1 | INTEGER | read-only | MX25 Port Number. |
| INT cdx6500mx25pSubType | 1.3.6.1.4.1.449.2.1.2.1.1.4.1.1.2 | INTEGER | read-only | This is the mode in which this MX25 port will run. newvalMaster : same functionality as 'master', new enumeration added for RFC1155 compatibility. |
| cdx6500PPCTMX25MPortTable | 1.3.6.1.4.1.449.2.1.2.1.1.4.2 | not-accessible | All of the configuration parameters relevant to the MX.25 Master port table. | |
| cdx6500PPCTMX25MPortEntry | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1 | not-accessible | A row of MX.25 Master Port configuration parameters. | |
| INT cdx6500mx25mpCfgPortNum | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.1 | INTEGER | read-only | MX25 Port Number. |
| INT cdx6500mx25mpSubType | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.2 | INTEGER | read-only | This is the mode in which this MX25 port will run. newvalMaster : same functionality as 'master', new enumeration added for RFC1155 compatibility. |
| INT cdx6500mx25mpClockSource | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.3 | INTEGER | read-only | int - internal clock source. ext - external clock source. newvalInt - same functionality as 'int', new enumeration added for RFc1155 compatibility. |
| INT cdx6500mx25mpClockSpeed | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.4 | INTEGER | read-only | This is the speed of the port in bits per second, when using internal clocking. |
| INT cdx6500mx25mpStationCnt | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.5 | INTEGER | read-only | The number of slave stations on the MX25 line. |
| INT cdx6500mx25mpPollTimer | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.6 | INTEGER | read-only | Worst case delay for a slave to respond to a poll frame sent by the master, including modem turn around time, etc. Value in 10ths of second ( 30 = 3.0 seconds ). |
| INT cdx6500mx25mpPollPeriod | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.7 | INTEGER | read-only | Time in milliseconds between polls when no data is exchanged. |
| INT cdx6500mx25mpTries | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.8 | INTEGER | read-only | Maximum number of attempts to complete a transmission. |
| INT cdx6500mx25mpRestartTimer | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.9 | INTEGER | read-only | Restart-Request timeout timer in seconds. If timer expires, request is sent again. |
| INT cdx6500mx25mpResetTimer | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.10 | INTEGER | read-only | Reset-Request timeout timer in seconds. If timer expires, request is sent again. |
| INT cdx6500mx25mpCallTimer | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.11 | INTEGER | read-only | Call-Request timeout timer in seconds. If timer expires, call is cleared. |
| INT cdx6500mx25mpClearTimer | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.12 | INTEGER | read-only | Clear-Request timeout timer in seconds. If timer expires, request is sent again. |
| STR cdx6500mx25mpPortControl | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.13 | DisplayString | read-only | Specify any of the following port control options: NONE - no option specified. MB - raise Pin 22 when the port becomes disabled. |
| INT cdx6500mx25mpTXEncoding | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.14 | INTEGER | read-only | This is the data encoding used on the MX25 link. nrz - Non Return to Zero. nrzi - Non Return to Zero Inverted. newvalNrz : same functionality as 'nrz', new enumeration added for RFC1155 compatibility. |
| INT cdx6500mx25mpElectricalInterfaceType | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.15 | INTEGER | read-only | Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled |
| INT cdx6500mx25mpV24ElectricalInterfaceOption | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.16 | INTEGER | read-only | Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal |
| INT cdx6500mx25mpHighSpeedElectricalInterfaceOption | 1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.17 | INTEGER | read-only | Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
| cdx6500PPCTMX25SPortTable | 1.3.6.1.4.1.449.2.1.2.1.1.4.3 | not-accessible | All of the configuration parameters relevant to the MX.25 Slave port table. | |
| cdx6500PPCTMX25SPortEntry | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1 | not-accessible | A row of MX.25 Slave Port configuration parameters. | |
| INT cdx6500mx25spCfgPortNum | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.1 | INTEGER | read-only | MX25 Port Number. |
| INT cdx6500mx25spSubType | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.2 | INTEGER | read-only | This is the mode in which this MX25 port will run. |
| INT cdx6500mx25spClockSource | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.3 | INTEGER | read-only | int - internal clock source. ext - external clock source. newvalInt - same functionality as 'int', new enumeration added for RFC1155 compatibility. |
| INT cdx6500mx25spClockSpeed | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.4 | INTEGER | read-only | This is the speed of the port in bits per second, when using internal clocking. |
| STR cdx6500mx25spStationAddress | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.5 | DisplayString | read-only | The station address on the multidrop line. |
| INT cdx6500mx25spPVCChannels | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.6 | INTEGER | read-only | Number of logical channels used for Permanent Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and consistent with needs. PVC connections must be configured in the PVC Table. |
| INT cdx6500mx25spStartingPVC | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.7 | INTEGER | read-only | This is the starting logical channel number for the Permanent Virtual Circuits on this link. Not used if the number of PVCs = 0. |
| INT cdx6500mx25spSVCChannels | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.8 | INTEGER | read-only | Number of logical channels used in Switched Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and consistent with needs. |
| INT cdx6500mx25spStartingSVC | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.9 | INTEGER | read-only | This is the starting logical channel number for the Switched Virtual Circuits on this link. Not used if the number of SVCs = 0. |
| INT cdx6500mx25spPollTimer | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.10 | INTEGER | read-only | Worst case delay for a slave to respond to a poll frame sent by the master, including modem turn around time, etc. Value in 10ths of second ( 30 = 3.0 seconds ). |
| INT cdx6500mx25spTries | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.11 | INTEGER | read-only | Maximum number of attempts to complete a transmission. |
| INT cdx6500mx25spFrameWinSize | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.12 | INTEGER | read-only | Frame level window size must be set to the same value in devices at each end of the link. |
| INT cdx6500mx25spPacketWinSize | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.13 | INTEGER | read-only | Packet level window size must be set to the same value in devices at each end of the link. |
| INT cdx6500mx25spRestartTimer | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.14 | INTEGER | read-only | Restart-Request timeout timer in seconds. If timer expires, request is sent again. |
| INT cdx6500mx25spResetTimer | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.15 | INTEGER | read-only | Reset-Request timeout timer in seconds. If timer expires, request is sent again. |
| INT cdx6500mx25spCallTimer | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.16 | INTEGER | read-only | Call-Request timeout timer in seconds. If timer expires, call is cleared. |
| INT cdx6500mx25spClearTimer | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.17 | INTEGER | read-only | Clear-Request timeout timer in seconds. If timer expires, request is sent again. |
| STR cdx6500mx25spMX25Options | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.18 | DisplayString | read-only | Select options on this MX.25 port as follows: NONE - no option specified. HOLD - hold calls over link restart. CUG - check closed user group; otherwise, CUG passes transparently. INL - inter-node link. Link goes to another 6500 device. INLA - set with INL option when an MX.25 link connection is to a 6500 node using 2.12.04 or earlier. DELAY - enable Delay and Path trace on this link (link must connected to Rel. 4.xx node) Any combination of the above specified by summing (e.g. HOLD+CUG+. . .). |
| STR cdx6500mx25spRCDestination | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.19 | DisplayString | read-only | All calls entering this port will be routed to the destination specified in this parameter, irrespective of route selection table entries. For example, to route calls to port 1, use P1. To route calls to port 2, station 4, use P2S4. Blank this field to disable this function. |
| STR cdx6500mx25spCUG | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.20 | DisplayString | read-only | The port may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number (except --) and separated by a comma. (e.g. 12,34,56,09,02,03 ). -- - No CUG Membership 00-99 - CUG Membership |
| INT cdx6500mx25spBillingRecords | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.21 | INTEGER | read-only | This controls whether billing (accounting) records will be created for calls on this port. newvalOff - same functionality as 'off', new enumeration added for RFC1155 compatibility. |
| STR cdx6500mx25spPortControl | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.22 | DisplayString | read-only | Specify any of the following port control options: NONE - no option specified. MB - raise Pin 22 when the port becomes disabled. |
| INT cdx6500mx25spTXEncoding | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.23 | INTEGER | read-only | This is the data encoding used on the MX25 link. nrz - Non Return to Zero. nrzi - Non Return to Zero Inverted. newvalNrz - same functionality as 'nrz', new enumeration added for RFC1155 compatibility. |
| INT cdx6500mx25spUpperQueue | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.24 | INTEGER | read-only | This is the maximum number of data packets a channel on this port will queue for transmission before invoking flow control to the attached channel. |
| INT cdx6500mx25spLowerQueue | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.25 | INTEGER | read-only | This is the number of data packets a channel on this port will have queued for transmission when it releases flow control to the attached channel. |
| INT cdx6500mx25spElectricalInterfaceType | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.26 | INTEGER | read-only | Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled |
| INT cdx6500mx25spV24ElectricalInterfaceOption | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.27 | INTEGER | read-only | Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal |
| INT cdx6500mx25spHighSpeedElectricalInterfaceOption | 1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.28 | INTEGER | read-only | Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
| cdx6500PCTStationProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1.3 | |||
| cdx6500SPCTMX25StationTable | 1.3.6.1.4.1.449.2.1.2.1.3.1 | not-accessible | All of the configuration parameters relevant to the MX.25 station table. | |
| cdx6500SPCTMX25StationEntry | 1.3.6.1.4.1.449.2.1.2.1.3.1.1 | not-accessible | A row of MX.25 station configuration parameters. | |
| INT cdx6500mx25sCfgPortNum | 1.3.6.1.4.1.449.2.1.2.1.3.1.1.1 | INTEGER | read-only | MX25 Port Number. |
| INT cdx6500mx25sCfgStationNum | 1.3.6.1.4.1.449.2.1.2.1.3.1.1.2 | INTEGER | read-only | The number of the controller on the multidrop line. Also used for routing purposes. |
| STR cdx6500mx25sStationAddress | 1.3.6.1.4.1.449.2.1.2.1.3.1.1.3 | DisplayString | read-only | The station address on the multidrop line. |
| INT cdx6500mx25sPVCChannels | 1.3.6.1.4.1.449.2.1.2.1.3.1.1.4 | INTEGER | read-only | Number of logical channels used for Permanent Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and consistent with needs. PVC connections must be configured in the PVC Table. |
| INT cdx6500mx25sStartingPVC | 1.3.6.1.4.1.449.2.1.2.1.3.1.1.5 | INTEGER | read-only | This is the starting logical channel number for the Permanent Virtual Circuits on this link. Not used if the number of PVCs = 0. |
| INT cdx6500mx25sSVCChannels | 1.3.6.1.4.1.449.2.1.2.1.3.1.1.6 | INTEGER | read-only | Number of logical channels used in Switched Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and consistent with needs. |
| INT cdx6500mx25sStartingSVC | 1.3.6.1.4.1.449.2.1.2.1.3.1.1.7 | INTEGER | read-only | This is the starting logical channel number for the Switched Virtual Circuits on this link. Not used if the number of SVCs = 0. |
| INT cdx6500mx25sFrameWinSize | 1.3.6.1.4.1.449.2.1.2.1.3.1.1.8 | INTEGER | read-only | Frame level window size must be set to the same value in devices at each end of the link. |
| INT cdx6500mx25sPacketWinSize | 1.3.6.1.4.1.449.2.1.2.1.3.1.1.9 | INTEGER | read-only | Packet level window size must be set to the same value in devices at each end of the link. |
| STR cdx6500mx25sMX25Options | 1.3.6.1.4.1.449.2.1.2.1.3.1.1.10 | DisplayString | read-only | Select options on this MX.25 port as follows: NONE - no option specified HOLD - hold calls over link restart CUG - check closed user group; otherwise, CUG passes transparently INL - inter-node link. Link goes to another 6500 device INLA - set with INL option when an MX.25 link connection is to a 6500 node using 2.12.04 or earlier Any combination of the above specified by summing (e.g. HOLD+CUG+. . .). |
| STR cdx6500mx25sRCDestination | 1.3.6.1.4.1.449.2.1.2.1.3.1.1.11 | DisplayString | read-only | All calls entering this port will be routed to the destination specified in this parameter, irrespective of route selection table entries. For example, to route calls to port 1, use P1. To route calls to port 2, station 4, use P2S4. Blank this field to disable this function. |
| STR cdx6500mx25sCUG | 1.3.6.1.4.1.449.2.1.2.1.3.1.1.12 | DisplayString | read-only | The port may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number (except --) and separated by a comma. (e.g. 12,34,56,09,02,03). -- - No CUG Membership 00-99 - CUG Membership |
| INT cdx6500mx25sBillingRecords | 1.3.6.1.4.1.449.2.1.2.1.3.1.1.13 | INTEGER | read-only | This controls whether billing (accounting) records will be created for calls on this port. newvalOff - same functionality as 'off', new enumeration added for RFc1155 compatibility. |
| INT cdx6500mx25sUpperQueue | 1.3.6.1.4.1.449.2.1.2.1.3.1.1.14 | INTEGER | read-only | This is the maximum number of data packets a channel on this port will queue for transmission before invoking flow control to the attached channel. |
| INT cdx6500mx25sLowerQueue | 1.3.6.1.4.1.449.2.1.2.1.3.1.1.15 | INTEGER | read-only | This is the number of data packets a channel on this port will have queued for transmission when it releases flow control to the attached channel. |
| cdx6500Statistics | 1.3.6.1.4.1.449.2.1.3 | |||
| cdx6500StatProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1 | |||
| cdx6500PSTPortProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1.1 | |||
| cdx6500PPSTMX25PortTable | 1.3.6.1.4.1.449.2.1.3.1.1.4 | not-accessible | All of the statistics parameters relevant to the MX25 Port table. | |
| cdx6500PPSTMX25PortEntry | 1.3.6.1.4.1.449.2.1.3.1.1.4.1 | not-accessible | A row of MX25 Port statistics parameters. | |
| INT cdx6500mx25pStatsPortNum | 1.3.6.1.4.1.449.2.1.3.1.1.4.1.1 | INTEGER | read-only | Number of the port. |
| STR cdx6500mx25pPortStatus | 1.3.6.1.4.1.449.2.1.3.1.1.4.1.2 | DisplayString | read-only | Status of this port : Up - Port is active. Down - Port Is inactive. Disabled - An operator has disabled the port. Busy Out - an operator has busied out the port. |
| INT cdx6500mx25pPortSpeed | 1.3.6.1.4.1.449.2.1.3.1.1.4.1.3 | INTEGER | read-only | This is the speed of the port when Clock=Int; this is the detected clock speed if Clock=Ext. If Port Speed is 0, Clock=Ext but clocking is not being received from attached device. |
| CTR cdx6500mx25pCharInTotal | 1.3.6.1.4.1.449.2.1.3.1.1.4.1.4 | Counter | read-only | Number of characters received by the port since the last node, port, or statistics reset. |
| CTR cdx6500mx25pCharOutTotal | 1.3.6.1.4.1.449.2.1.3.1.1.4.1.5 | Counter | read-only | Number of characters sent by the port since the last node, port, or statistics reset. |
| INT cdx6500mx25pCharsInPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.4.1.6 | INTEGER | read-only | Summary of the characters being received over the port. |
| INT cdx6500mx25pCharsOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.4.1.7 | INTEGER | read-only | Summary of the characters being sent over the port. |
| CTR cdx6500mx25pFrameInTotal | 1.3.6.1.4.1.449.2.1.3.1.1.4.1.8 | Counter | read-only | Number of frames received by the port since the last node, port, or statistics reset. |
| CTR cdx6500mx25pFrameOutTotal | 1.3.6.1.4.1.449.2.1.3.1.1.4.1.9 | Counter | read-only | Number of frames sent by the port since the last node, port, or statistics reset. |
| INT cdx6500mx25pFramesInPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.4.1.10 | INTEGER | read-only | Summary of the frames being received over the port. |
| INT cdx6500mx25pFramesOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.4.1.11 | INTEGER | read-only | Summary of the frames being sent over the port. |
| cdx6500PSTStationProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1.3 | |||
| cdx6500SPSTMX25StationTable | 1.3.6.1.4.1.449.2.1.3.1.3.1 | not-accessible | All of the statistics parameters relevant to the MX25 Station table. | |
| cdx6500SPSTMX25StationEntry | 1.3.6.1.4.1.449.2.1.3.1.3.1.1 | not-accessible | A row of MX25 Station statistics parameters. | |
| INT cdx6500mx25sStatsPortNum | 1.3.6.1.4.1.449.2.1.3.1.3.1.1.1 | INTEGER | read-only | Number of the port. |
| INT cdx6500mx25sStatsStationNum | 1.3.6.1.4.1.449.2.1.3.1.3.1.1.2 | INTEGER | read-only | Station reference number. |
| STR cdx6500mx25sStatsStnAddr | 1.3.6.1.4.1.449.2.1.3.1.3.1.1.3 | DisplayString | read-only | Configured station address. |
| CTR cdx6500mx25sCharInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.1.1.4 | Counter | read-only | Number of characters received by the port since the last node, port, or statistics reset |
| CTR cdx6500mx25sCharOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.1.1.5 | Counter | read-only | Number of characters sent by the port since the last node, port, or statistics reset |
| INT cdx6500mx25sCharsInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.1.1.6 | INTEGER | read-only | Summary of the characters being received over the port. |
| INT cdx6500mx25sCharsOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.1.1.7 | INTEGER | read-only | Summary of the characters being sent over the port. |
| CTR cdx6500mx25sFrameInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.1.1.8 | Counter | read-only | Number of frames received by the port since the last node, port, or statistics reset. |
| CTR cdx6500mx25sFrameOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.1.1.9 | Counter | read-only | Number of frames sent by the port since the last node, port, or statistics reset. |
| INT cdx6500mx25sFramesInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.1.1.10 | INTEGER | read-only | Summary of the frames being received over the port. |
| INT cdx6500mx25sFramesOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.1.1.11 | INTEGER | read-only | Summary of the frames being sent over the port. |
| INT cdx6500mx25sCallCount | 1.3.6.1.4.1.449.2.1.3.1.3.1.1.12 | INTEGER | read-only | Current number of calls. |
| cdx6500Controls | 1.3.6.1.4.1.449.2.1.4 | |||
| cdx6500ContMX25 | 1.3.6.1.4.1.449.2.1.4.6 | |||
| cdx6500ContMX25StationTable | 1.3.6.1.4.1.449.2.1.4.6.1 | not-accessible | All of the control parameters relevant to the MX25 Station table. | |
| cdx6500ContMX25StationEntry | 1.3.6.1.4.1.449.2.1.4.6.1.1 | not-accessible | A row of MX25 Station Control parameters. | |
| INT cdx6500mx25sContPortNum | 1.3.6.1.4.1.449.2.1.4.6.1.1.1 | INTEGER | not-accessible | MX25 Port Number. |
| INT cdx6500mx25sContStationNum | 1.3.6.1.4.1.449.2.1.4.6.1.1.2 | INTEGER | not-accessible | MX25 Station Number. |
| INT cdx6500mx25sContBootStation | 1.3.6.1.4.1.449.2.1.4.6.1.1.3 | INTEGER | write-only | Boots the specified MX25 station. boot - Boot Station. noBoot - Do not boot Station. |
| INT cdx6500mx25sContDisableStation | 1.3.6.1.4.1.449.2.1.4.6.1.1.4 | INTEGER | write-only | Disables the specified MX25 station. disable - Disable Station. noDisable - Do not disable Station. |
| INT cdx6500mx25sContEnableStation | 1.3.6.1.4.1.449.2.1.4.6.1.1.5 | INTEGER | write-only | Enables the specified MX25 station. enable - Enable Station. noEnable - Do not enable Station. |
| INT cdx6500mx25sContBusyOutStation | 1.3.6.1.4.1.449.2.1.4.6.1.1.6 | INTEGER | write-only | Busy outs the specified MX25 station. busyOut - Busyout Station. noBusyOut - Do not busyout Station. |
| INT cdx6500mx25sContResetStnStats | 1.3.6.1.4.1.449.2.1.4.6.1.1.7 | INTEGER | write-only | Busy outs the specified MX25 station. reset - Reset Station Statistics. noReset - Do not reset Station Statistics. |
RFC description
Codex CDX6500 MX.25 port protocol configuration for X.25 network interfaces.
Start monitoring Optical transport chassis with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.