| OID symbolic | OID numeric | Type | Access | Description |
|---|
| INT paramClientChassisStorageState | 1.3.6.1.4.1.33.7.18 | INTEGER | read-only | The status of the current attempt to update
parameters in local chassis storage. Corresponds
directly to the value labeled 'Chassis
Configuration:'. |
| INT paramClientCheckInterval | 1.3.6.1.4.1.33.7.7 | INTEGER | read-write | The number of minutes between checks for additional
parameter servers. Corresponds directly to
PARAMETER SERVER CHECK TIMER and the value labeled
'Check Timer:' in the PARAMETER SERVER display. |
| INT paramClientCheckNow | 1.3.6.1.4.1.33.7.8 | INTEGER | read-write | Control to cause this system to immediately check
for additional parameter servers. The agent always
returns 'ready' for this value. Setting the value
to 'ready' has no effect. Setting it to 'execute'
causes a check to be started. Corresponds to the
CHECK PARAMETER SERVER command. |
| OCT paramClientLoaderAddress | 1.3.6.1.4.1.33.7.3 | OCTET STRING | read-only | The network address of the system that most
recently provided this system's stored parameters.
Corresponds directly to the address value labeled
'Loaded From:' in the PARAMETER SERVER display. |
| ADR paramClientLoaderAddressType | 1.3.6.1.4.1.33.7.2 | AddressType | read-only | The type of network address contained in
paramClientLoaderAddress. 'unknown' means no
address has been defined. 'other' means no other
type value applies. 'local' means there is no
address and parameters were loaded from local
storage. 'ip' is an Internet IP address.
'ethernet' is an 802.3 MAC address. Corresponds
indirectly to the address value labeled 'Loaded
From:' in the PARAMETER SERVER display. |
| STR paramClientLoaderName | 1.3.6.1.4.1.33.7.1 | DisplayString | read-only | The name of the system that most recently provided
this system's stored parameters. Corresponds
directly to the name value labeled 'Loaded From:' in
the PARAMETER SERVER display. |
| INT paramClientParameterVersion | 1.3.6.1.4.1.33.7.4 | INTEGER | read-write | The version number of the parameters as stored in
this system's local memory. Corresponds directly to
SERVER PARAMETER VERSION and the value labeled 'Last
Update Version:' in the PARAMETER SERVER display. |
| STR paramClientPath | 1.3.6.1.4.1.33.7.17 | DisplayString | read-write | The directory path to the parameter file on all
servers. Corresponds directly to PARAMETER SERVER
PATH and the value labeled 'Path:' in the PARAMETER
SERVER display. |
| CTR paramClientProtocolErrors | 1.3.6.1.4.1.33.7.13 | Counter | read-only | The number of invalid parameter service protocol
messages received by this system. Corresponds
directly to the value labeled 'Bad Parameter
Messages:' in the PARAMETER SERVER display. |
| INT paramClientRetransmitInterval | 1.3.6.1.4.1.33.7.10 | INTEGER | read-write | The number of minutes between this system's
attempts to store new parameters with a server that
has not acknowledged previous attempts. Corresponds
directly to PARAMETER SERVER RETRANSMIT TIMER and
the value labeled 'Retransmit Timer: in the
PARAMETER SERVER display. |
| INT paramClientRetransmitLimit | 1.3.6.1.4.1.33.7.11 | INTEGER | read-write | The maximum number of attempts by this system to
store new parameters with a server that has not
acknowledged previous attempts. Corresponds
directly to PARAMETER SERVER RETRANSMIT LIMIT and
the value labeled 'Retransmit Limit:' in the
PARAMETER SERVER display. |
| INT paramClientServerCheck | 1.3.6.1.4.1.33.7.6 | INTEGER | read-write | Control over whether or not this system is allowed
to check for additional parameter servers.
'enabled' allows checking. Corresponds directly to
PARAMETER SERVER CHECK and the presence of PARAMETER
POLLING under the label 'Enabled Characteristics' in
the SERVER CHARACTERISTICS display. |
| INT paramClientServerLimit | 1.3.6.1.4.1.33.7.9 | INTEGER | read-write | The maximum number of parameter servers this system
is allowed to remember at the same time.
Corresponds directly to PARAMETER SERVER LIMIT and
the value labeled 'Parameter Server Limit:' in the
PARAMETER SERVER display. |
| INT paramClientServerNumber | 1.3.6.1.4.1.33.7.15 | INTEGER | read-only | The number of parameter servers known to this
system, indicating the number of entries in
serverTable. Corresponds directly to the value
labeled 'Parameter Servers:' in the PARAMETER SERVER
display. |
| CTR paramClientServerRejects | 1.3.6.1.4.1.33.7.14 | Counter | read-only | The number of parameter servers this system
rejected due to exceeding paramClientServerLimit.
Corresponds directly to the value labeled 'Rejected
Servers:' in the PARAMETER SERVER display. |
| INT paramClientState | 1.3.6.1.4.1.33.7.12 | INTEGER | read-only | This system's state with regard to update attempts.
The value meanings are:
other none of the following
idle no update in progress
internal internal state of no meaning to manager
hold holding to keep from updating too often
retry waiting to retry after failure
Corresponds directly to the value labeled 'Storage
State:' in the PARAMETER SERVER display. |
| INT paramClientTftpBroadcast | 1.3.6.1.4.1.33.7.20 | INTEGER | read-write | Control over whether or not this system is allowed
to send out a TFTP read broadcast after sending
a BOOTP broadcast during the Parameter Check Function.
'enabled' allows TFTP broadcast. Corresponds directly to
the presence of PARAMETER TFTP BROADCAST
under the label 'Enabled Characteristics' in
the SERVER CHARACTERISTICS display. |
| DAT paramClientUpdateTime | 1.3.6.1.4.1.33.7.5 | DateTime | read-only | This system's local date and time when it last
attempted to store parameters with a parameter
server. Corresponds directly to the values labeled
'Last Update Date:' and 'Last Update Time:' in the
PARAMETER SERVER display. |
| INT paramClientWriteNow | 1.3.6.1.4.1.33.7.21 | INTEGER | read-write | Control to start saving parameters immediately in
response to an execute. Corresponds directly to the WRITE
PARAMETERS command. In response to a get-request or
get-next-request, the agent always returns 'ready' for
this value. |
| OCT paramServerAddress | 1.3.6.1.4.1.33.7.16.1.4 | OCTET STRING | read-write | The server's network address. Corresponds directly
to the value labeled 'Address' in the PARAMETER
SERVER display. |
| ADR paramServerAddressType | 1.3.6.1.4.1.33.7.16.1.3 | AddressType | read-write | The type of network address contained in
paramServerAddress. 'unknown' means no address has
been defined. 'other' means no other type value
applies. 'local' means there is no address and
parameters were loaded from local storage. 'ip' is
an Internet IP address. 'ethernet' is an 802.3 MAC
address. Corresponds indirectly to the value
labeled 'Address' in the PARAMETER SERVER display. |
| paramServerEntry | 1.3.6.1.4.1.33.7.16.1 | | not-accessible | Status and parameter values for a parameter
server. |
| INT paramServerEntryStatus | 1.3.6.1.4.1.33.7.16.1.2 | INTEGER | read-write | The status of the entry. Set to 'invalid' to
remove the entry, which corresponds directly to the
CLEAR/PURGE PARAMETER SERVER command. Actual
removal of the entry is implementation specific. |
| STR paramServerName | 1.3.6.1.4.1.33.7.16.1.1 | DisplayString | read-only | The server's name, unique within this system.
Always 16 characters, null padded on the end.
Corresponds directly to the name used to create the
entry and the value labeled 'Name' in the PARAMETER
SERVER display. |
| INT paramServerStoredFailure | 1.3.6.1.4.1.33.7.16.1.8 | INTEGER | read-only | When paramServerStoredStatus is 'failed' or
'failing', the reason for the most recent failure.
Corresponds directly to the value labeled 'Reason'
in the PARAMETER SERVER display. The value meanings
are:
other none of the following
none no failure
protocolOut invalid protocol message to server
open file open error at server
read file read error at server
write file write error at server
resource resource lack at server (e.g. disk)
protocolIn invalid protocol message from server
response no response from server
close file close error at server
delete file delete error at server
rename file rename error at server
fileData bad parameter data stored at server |
| INT paramServerStoredStatus | 1.3.6.1.4.1.33.7.16.1.7 | INTEGER | read-only | Status of this system's parameters with respect to
the server. Corresponds directly to the value
labeled 'Status' in the PARAMETER SERVER display.
The value meanings are:
ahead server version newer than system's
behind server version older than system's
current up to date
failed system no longer attempting update
failing system trying to update but failing
query attempting to determine version
noMemCard no memory card in card drive
unknown version not known |
| DAT paramServerStoredTime | 1.3.6.1.4.1.33.7.16.1.6 | DateTime | read-only | The server's date and time when it stored the
parameters of version paramServerStoredVersion.
Corresponds directly to the value labeled 'Date' in
the PARAMETER SERVER display. |
| INT paramServerStoredVersion | 1.3.6.1.4.1.33.7.16.1.5 | INTEGER | read-only | Parameter version number currently stored at the
server. Corresponds directly to the value labeled
'Version' in the PARAMETER SERVER display. |
| paramServerTable | 1.3.6.1.4.1.33.7.16 | | not-accessible | A list of parameter server entries. The number of
entries is given by the value of
paramClientServerNumber. |
| xParamClient | 1.3.6.1.4.1.33.7 | | | |
