All MIBs › MRV-IN-REACH-PARAM-CLIENT-MIB › paramServerStoredFailure
paramServerStoredFailure
Module: MRV-IN-REACH-PARAM-CLIENT-MIB
OID (symbolic): MRV-IN-REACH-PARAM-CLIENT-MIB::paramServerStoredFailure
OID (numeric): 1.3.6.1.4.1.33.7.16.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: When paramServerStoredStatus is 'failed' or 'failing', the reason for the most recent failure. Corresponds directly to the value labeled 'Reason' in the PARAMETER SERVER display. The value meanings are:
other none of the following none no failure protocolOut invalid protocol message to server open file open error at server read file read error at server write file write error at server resource resource lack at server (e.g. disk) protocolIn invalid protocol message from server response no response from server close file close error at server delete file delete error at server rename file rename error at server fileData bad parameter data stored at server
What is paramServerStoredFailure?
When paramServerStoredStatus shows failing or failed, this gives the specific reason — e.g. 'open' or 'write' for file errors at the server, 'response' for no reply from the server, or 'resource' for the server running low on disk space.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.33.7.16.1.8 snmpwalk -v2c -c public <target> MRV-IN-REACH-PARAM-CLIENT-MIB::paramServerStoredFailure
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.33.7.16.1.8.1 snmpget -v2c -c public <target> MRV-IN-REACH-PARAM-CLIENT-MIB::paramServerStoredFailure.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> paramServerStoredFailure.1
Start monitoring MRV In-Reach terminal-server device (parameter-server client) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MRV-IN-REACH-PARAM-CLIENT-MIB::paramServerStoredFailure OID value, configure state conditions and alerts, and monitor any MRV In-Reach terminal-server device (parameter-server client) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.33 | iTouch | ITOUCH-MIB |
| 1.3.6.1.4.1.33.7 | xParamClient | ITOUCH-PARAM-CLIENT-MIB |
| 1.3.6.1.4.1.33.7.16 | paramServerTable | ITOUCH-PARAM-CLIENT-MIB |
| 1.3.6.1.4.1.33.7.16.1 | paramServerEntry | ITOUCH-PARAM-CLIENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.33.7.16.1.8 | paramServerStoredFailure | MRV-IN-REACH-PARAM-CLIENT-MIB |