MPLS-LSR-STD-MIB :: mplsXCEntry

MIB Reference — IPNetwork Monitor

All MIBsMPLS-LSR-STD-MIBmplsXCEntry

mplsXCEntry

Module: MPLS-LSR-STD-MIB

OID (symbolic): MPLS-LSR-STD-MIB::mplsXCEntry

OID (numeric): 1.3.6.1.2.1.10.166.2.1.10.1

Node type: OBJECT-TYPE

Access: not-accessible

Description:

A row in this table represents one cross-connect entry. It is indexed by the following objects:

- cross-connect index mplsXCIndex that uniquely identifies a group of cross-connect entries

- in-segment index, mplsXCInSegmentIndex

- out-segment index, mplsXCOutSegmentIndex

LSPs originating at this LSR: These are represented by using the special of value of mplsXCInSegmentIndex set to the string containing a single octet 0x00. In this case the mplsXCOutSegmentIndex MUST not be the string containing a single octet 0x00.

LSPs terminating at this LSR: These are represented by using the special value mplsXCOutSegmentIndex set to the string containing a single octet 0x00.

Special labels: Entries indexed by the strings containing the reserved MPLS label values as a single octet 0x00 through 0x0f (inclusive) imply LSPs terminating at this LSR. Note that situations where LSPs are terminated with incoming label equal to the string containing a single octet 0x00 can be distinguished from LSPs originating at this LSR because the mplsXCOutSegmentIndex equals the string containing the single octet 0x00.

An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol.

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.2mgmtBKTEL-HFC862-BASE-MIB
1.3.6.1.2.1mib_2CHECKPOINT-MIB-2
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.166mplsStdMIBMPLS-TC-STD-MIB
1.3.6.1.2.1.10.166.2mplsLsrStdMIBMPLS-LSR-STD-MIB
1.3.6.1.2.1.10.166.2.1mplsLsrObjectsMPLS-LSR-STD-MIB
1.3.6.1.2.1.10.166.2.1.10mplsXCTableMPLS-LSR-STD-MIB
1.3.6.1.2.1.10.166.2.1.10.1mplsXCEntryMPLS-LSR-STD-MIB