All MIBs › MPLS-LSR-STD-MIB › mplsOutSegmentTopLabel
mplsOutSegmentTopLabel
Module: MPLS-LSR-STD-MIB
OID (symbolic): MPLS-LSR-STD-MIB::mplsOutSegmentTopLabel
OID (numeric): 1.3.6.1.2.1.10.166.2.1.7.1.4
Node type: OBJECT-TYPE
Type: MplsLabel
Access: read-create
Description:
If mplsOutSegmentPushTopLabel is true then this represents the label that should be pushed onto the top of the outgoing packet's label stack. Otherwise this value SHOULD be set to 0 by the management station and MUST be ignored by the agent. This
object cannot be modified if mplsOutSegmentRowStatus is active(1).
What is mplsOutSegmentTopLabel?
This parameter specifies the MPLS label that should be added to the top of the label stack when pushing a new label onto an outgoing packet at a Label Switching Router (LSR). MPLS uses labels for fast packet forwarding along pre-configured Label Switched Paths (LSPs), and this value determines which LSP segment the packet follows next. An operator configures this to establish or modify MPLS forwarding paths for traffic engineering and service delivery.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.166 | mplsStdMIB | MPLS-TC-STD-MIB |
| 1.3.6.1.2.1.10.166.2 | mplsLsrStdMIB | MPLS-LSR-STD-MIB |
| 1.3.6.1.2.1.10.166.2.1 | mplsLsrObjects | MPLS-LSR-STD-MIB |
| 1.3.6.1.2.1.10.166.2.1.7 | mplsOutSegmentTable | MPLS-LSR-STD-MIB |
| 1.3.6.1.2.1.10.166.2.1.7.1 | mplsOutSegmentEntry | MPLS-LSR-STD-MIB |
| 1.3.6.1.2.1.10.166.2.1.7.1.4 | mplsOutSegmentTopLabel | MPLS-LSR-STD-MIB |