All MIBs › MPLS-LSR-STD-MIB › mplsLabelStackStorageType
mplsLabelStackStorageType
Module: MPLS-LSR-STD-MIB
OID (symbolic): MPLS-LSR-STD-MIB::mplsLabelStackStorageType
OID (numeric): 1.3.6.1.2.1.10.166.2.1.13.1.6
Node type: OBJECT-TYPE
Type: StorageType
Access: read-create
Description:
This variable indicates the storage type for this object. This object cannot be modified if mplsLabelStackRowStatus is active(1). No objects are required to be writable for rows in this table with this object set to permanent(4).
The agent MUST ensure that all related entries in this table retain the same value for this object. Agents MUST ensure that the storage type for all entries related to a particular mplsXCEntry retain the same value for this object as the mplsXCEntry's StorageType.
What is mplsLabelStackStorageType?
This OID stores how the label stack configuration is stored on the device (permanent, temporary, or volatile). It tells you whether the label stack settings will survive a device restart—permanent means they persist, volatile means they disappear. A network operator would check this when setting up MPLS label routing to ensure configurations stick around after maintenance reboots.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.166 | mplsStdMIB | MPLS-TC-STD-MIB |
| 1.3.6.1.2.1.10.166.2 | mplsLsrStdMIB | MPLS-LSR-STD-MIB |
| 1.3.6.1.2.1.10.166.2.1 | mplsLsrObjects | MPLS-LSR-STD-MIB |
| 1.3.6.1.2.1.10.166.2.1.13 | mplsLabelStackTable | MPLS-LSR-STD-MIB |
| 1.3.6.1.2.1.10.166.2.1.13.1 | mplsLabelStackEntry | MPLS-LSR-STD-MIB |
| 1.3.6.1.2.1.10.166.2.1.13.1.6 | mplsLabelStackStorageType | MPLS-LSR-STD-MIB |