All MIBs › MPLS-LSR-STD-MIB › mplsInterfaceLabelParticipationType
mplsInterfaceLabelParticipationType
Module: MPLS-LSR-STD-MIB
OID (symbolic): MPLS-LSR-STD-MIB::mplsInterfaceLabelParticipationType
OID (numeric): 1.3.6.1.2.1.10.166.2.1.1.1.8
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: If the value of the mplsInterfaceIndex for this entry is zero, then this entry corresponds to the per-platform label space for all interfaces configured to use that label space. In this case the perPlatform(0) bit MUST be set; the perInterface(1) bit is meaningless and MUST be ignored.
The remainder of this description applies to entries with a non-zero value of mplsInterfaceIndex.
If the perInterface(1) bit is set then the value of mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn, mplsInterfaceLabelMinOut, and mplsInterfaceLabelMaxOut for this entry reflect the label ranges for this interface.
If only the perPlatform(0) bit is set, then the value of mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn, mplsInterfaceLabelMinOut, and mplsInterfaceLabelMaxOut for this entry MUST be identical to the instance of these objects with index 0. These objects may only vary from the entry with index 0 if both the perPlatform(0) and perInterface(1) bits are set.
In all cases, at a minimum one of the perPlatform(0) or perInterface(1) bits MUST be set to indicate that at least one label space is in use by this interface. In all cases, agents MUST ensure that label ranges are specified consistently and MUST return an inconsistentValue error when they do not.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.166.2.1.1.1.8 snmpwalk -v2c -c public <target> MPLS-LSR-STD-MIB::mplsInterfaceLabelParticipationType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.166.2.1.1.1.8.1 snmpget -v2c -c public <target> MPLS-LSR-STD-MIB::mplsInterfaceLabelParticipationType.1
Start monitoring Vendor-neutral IETF standard (MPLS-capable router/label switching router) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-LSR-STD-MIB::mplsInterfaceLabelParticipationType OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS-capable router/label switching router) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.166 | mplsStdMIB | MPLS-TC-STD-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.166.2 | mplsLsrStdMIB | MPLS-LSR-STD-MIB |
| 1.3.6.1.2.1.10.166.2.1 | mplsLsrObjects | MPLS-LSR-STD-MIB |
| 1.3.6.1.2.1.10.166.2.1.1 | mplsInterfaceTable | MPLS-LSR-STD-MIB |
| 1.3.6.1.2.1.10.166.2.1.1.1 | mplsInterfaceEntry | MPLS-LSR-STD-MIB |
| 1.3.6.1.2.1.10.166.2.1.1.1.8 | mplsInterfaceLabelParticipationType | MPLS-LSR-STD-MIB |