MMB-COM-MIB

All MIBs › MMB-COM-MIB

Category: Telecom / Multimedia

Description: Defines MMB communication module configuration and interface management objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MMB-COM-MIB?

MMB-COM-MIB is a Fujitsu-specific MIB, part of the PRIMEQUEST server system-management MIB family, that models the chassis/unit inventory and management-network configuration exposed by the Management Board (MMB) service processor. It defines objects such as unitTable (unitModelName, unitManufacturer, unitSerialNumber, unitLocation, frontDoorStatus, housingOpenStatus), the unitParentTable/unitChildTable pair describing chassis-partition hierarchy, and managementNodeTable, which carries the MMB's own network/communication interface configuration (unitNodeAddress, unitNodeIpNetmask, unitNodeGateway, unitNodeMacAddress, unitNodeUseDHCP, unitNodeControllerType/Model/FWVersion) plus a managementChannelType object describing the communication channel in use. This makes the MIB useful for monitoring both the physical/chassis identity of PRIMEQUEST units and the health of the MMB's own management communication path, rather than general OS or application data. It is deployed alongside Fujitsu's broader PRIMEQUEST management MIB set on PRIMEQUEST server chassis, and the MMB-COM-MIB MIB is the reference for the exact object layout of this management-node/communication data.

IPNetwork Monitor allows you to monitor SNMP objects defined in MMB-COM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Fujitsu PRIMEQUEST server chassis (MMB service processor)

Monitoring Examples

An operator polls managementNodeTable for a given uUnitId to confirm unitNodeAddress and unitNodeGateway match the expected MMB management network configuration and that unitNodeControllerFWVersion is current; a mismatch between the configured unitNodeAddress and the address actually reachable, combined with an unexpected managementChannelType, would indicate the MMB's management communication path has been reconfigured or degraded.

What Can Be Monitored

unit/chassis inventory table entries
chassis parent/child partition relationships
management node network address configuration
management channel type
MMB controller type, model, and firmware version
unit table update counters

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
TimeTicks
enterprises
mgmt

From RFC1213-MIB

DisplayString
PhysAddress
mib-2

OIDs

OID symbolic	OID numeric	Type	Access	Description
fujitsu	1.3.6.1.4.1.211
products	1.3.6.1.4.1.211.1
iaServer	1.3.6.1.4.1.211.1.31
primequest	1.3.6.1.4.1.211.1.31.1
mmb	1.3.6.1.4.1.211.1.31.1.1
sysInfo	1.3.6.1.4.1.211.1.31.1.1.1
agentInfo	1.3.6.1.4.1.211.1.31.1.1.1.1
STR agentId	1.3.6.1.4.1.211.1.31.1.1.1.1.1	DisplayString	read-only	Agent identification string; Not supported.
STR agentCompany	1.3.6.1.4.1.211.1.31.1.1.1.1.2	DisplayString	read-only	Agent's company name (e.g. Fujitsu Siemens Computers); Not supported.
STR agentVersion	1.3.6.1.4.1.211.1.31.1.1.1.1.3	DisplayString	read-only	Agent's version string (e.g. 1.05); Not supported.
STR agentBuild	1.3.6.1.4.1.211.1.31.1.1.1.1.4	DisplayString	read-only	Compilation time and date of agent program; Not supported.
INT agentWriteAllowed	1.3.6.1.4.1.211.1.31.1.1.1.1.5	INTEGER	read-only	Defines whether writable objects can be written (except shutdown/power-off operations); Not supported.
INT agentShutdownAllowed	1.3.6.1.4.1.211.1.31.1.1.1.1.6	INTEGER	read-only	Defines whether shutdown/power-off objects can be written; Not supported.
unitInformation	1.3.6.1.4.1.211.1.31.1.1.1.2
INT localServerUnitId	1.3.6.1.4.1.211.1.31.1.1.1.2.1	INTEGER	read-only	Unit identifier number of the local server (usually is ID 1). This ID can be used as index into the units table.
INT psPowerSupplyLoad	1.3.6.1.4.1.211.1.31.1.1.1.2.1.6	INTEGER	read-only	Actual power supply output load in Watts (0 = not available); Not supported.
INT numberUnits	1.3.6.1.4.1.211.1.31.1.1.1.2.2	INTEGER	read-only	Number of available units (size of units table).
unitTable	1.3.6.1.4.1.211.1.31.1.1.1.2.3		not-accessible	Description of all units in this MIB
units	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1		not-accessible
INT uUnitId	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
INT unitClass	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.2	INTEGER	read-only	Unit classification (type)
INT unitCainetNr	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.3	INTEGER	read-only	Physical identification number or partition identification number of units. The ID of the 'chassis' is usually 0.
STR unitDesignation	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.4	DisplayString	read-only	Unit identification name. (e.g. 'SB#1') This object returns 'Part Number'; if the index shows chassis.
STR unitModelName	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.5	DisplayString	read-only	Unit model name (e.g. 'PRIMERGY PRIMEQUEST 3200 model xxx')
STR unitManufacturer	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.6	DisplayString	read-only	Unit manufacturer name (e.g. 'Fujitsu')
STR unitSerialNumber	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.7	DisplayString	read-only	Unit serial number (e.g. '0202456123')
STR unitLocation	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.8	DisplayString	read-only	Unit location string (e.g. 'ServerCenter Room 17; Rack 9')
STR unitContact	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.9	DisplayString	read-only	Unit contact name (e.g. 'Mr. Bond')
STR unitAdminURL	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.10	DisplayString	read-only	URL of administration HTML interface(MMB-GUI) (e.g. 'http://MyServer/admin')
INT frontDoorStatus	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.11	INTEGER	read-only	Status describing whether the front door is open or closed; Not supported.
INT housingOpenStatus	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.12	INTEGER	read-only	Status describing whether the housing is open or closed; Not supported.
STR msgLogLanguages	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.13	DisplayString	read-only	Supported languages of text message log (comma-seperated list of decimal language codes; see sc2MessageTextLogTable). e.g. '1031;1033' means German and English are supported. English (1033) is the default language and is always available; Not supported.
STR unitWorldWideName	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.14	DisplayString	read-only	Unit World Wide Name. A 64-bit sized address for storage devices (e.g. '6661E2B0A00B88FB'); Not supported.
STR remcsId	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.15	DisplayString	read-only	REMCS system identification string (binary data); Not supported. Format of Fujitsu REMCS ID (40byte) Format = TTMMMMMMMMMMMMmmmmmmmmmmmmCCnnnnnnnnnnnn TT : 2byte : Type ID for Company Name MM...M : 12byte : Model Name mm...m : 12byte : Device Name CC : 2byte : Checksum nn...n : 12byte : Serial number
STR assetTag	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.16	DisplayString	read-only	Customer specific asset tag (40 bytes)
STR unitManagementIpAddress	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.18	DisplayString	read-only	IPv4 address of the partition for management purpose (e.g. '192.168.0.140')
STR unitManagementIpAddressV6	1.3.6.1.4.1.211.1.31.1.1.1.2.3.1.20	DisplayString	read-only	IPv6 address of the partition for management purpose (e.g. '2001:0db8:0000:85a3:0000:0000:ac1f:8001')
INT unitTableUpdateCount	1.3.6.1.4.1.211.1.31.1.1.1.2.4	INTEGER	read-only	Counter defining the update revision of the unit table. This counter is incremented with every table contents change/update.
unitParentTable	1.3.6.1.4.1.211.1.31.1.1.1.2.5		not-accessible	Parent-child relationship of all units
unitParents	1.3.6.1.4.1.211.1.31.1.1.1.2.5.1		not-accessible
INT pUnitId	1.3.6.1.4.1.211.1.31.1.1.1.2.5.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
INT pParentNr	1.3.6.1.4.1.211.1.31.1.1.1.2.5.1.2	INTEGER	read-only	Parent number (index: 1..n)
INT parentUnit	1.3.6.1.4.1.211.1.31.1.1.1.2.5.1.3	INTEGER	read-only	Parent unit. This is the same value as in the object of 'pParentNr'.
INT parentUnitClass	1.3.6.1.4.1.211.1.31.1.1.1.2.5.1.4	INTEGER	read-only	Unit classification (type). This is the same value as in units table.
unitChildTable	1.3.6.1.4.1.211.1.31.1.1.1.2.6		not-accessible	Parent-child relationship of all units
unitChilds	1.3.6.1.4.1.211.1.31.1.1.1.2.6.1		not-accessible
INT cUnitId	1.3.6.1.4.1.211.1.31.1.1.1.2.6.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
INT cChildNr	1.3.6.1.4.1.211.1.31.1.1.1.2.6.1.2	INTEGER	read-only	Child number (index: 1..n)
INT childUnit	1.3.6.1.4.1.211.1.31.1.1.1.2.6.1.3	INTEGER	read-only	Child unit. This is the same value as in the object of 'cChildNr'.
INT childUnitClass	1.3.6.1.4.1.211.1.31.1.1.1.2.6.1.4	INTEGER	read-only	Unit classification (type). This is the same value as in units table.
INT parentChildTableUpdateCount	1.3.6.1.4.1.211.1.31.1.1.1.2.7	INTEGER	read-only	Counter defining the update revision of the parent-child unit table. This counter is incremented with every table contents change/update.
management	1.3.6.1.4.1.211.1.31.1.1.1.3
managementNodeTable	1.3.6.1.4.1.211.1.31.1.1.1.3.1		not-accessible	SNMP management node addresses (how to address the units)
managementNodes	1.3.6.1.4.1.211.1.31.1.1.1.3.1.1		not-accessible
INT mnUnitId	1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
INT mnNodeNr	1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.2	INTEGER	read-only	Management node address number (index: 1..n)
INT unitNodeIfType	1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.3	INTEGER	read-only	Management node interface type
STR unitNodeAddress	1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.4	DisplayString	read-only	Management node address (e.g. 192.168.0.100)
STR unitNodeIpNetmask	1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.5	DisplayString	read-only	Management node address (e.g. 255.255.255.128)
STR unitNodeGateway	1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.6	DisplayString	read-only	Management node address (e.g. 192.168.0.126)
STR unitNodeName	1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.7	DisplayString	read-only	Management node name (e.g. 'primequest-no1')
INT unitNodeClass	1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.8	INTEGER	read-only	Management node class: primary: operating system interface secondary: remote management controller interface management-blade: management blade in blade server secondary-backup: backup remote management controller interface
PHY unitNodeMacAddress	1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.9	PhysAddress	read-only	Management node hardware (MAC) address; ff:ff:ff:ff:ff:ff if value not available
INT unitNodeUseDHCP	1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.10	INTEGER	read-only	Management node uses DHCP to obtain its address
STR unitNodeControllerType	1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.11	DisplayString	read-only	The type of the remote management controller (for identification); like 'RSB'; 'RSB S2'; 'RSB S2 LP'... These names will not be changed if defined once; Not supported.
STR unitNodeControllerModel	1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.12	DisplayString	read-only	The model name of the remote management controller (for displaying); like 'Remote Service Board'; RemoteView Service Board S2'c This name should not be used for identification;only for displaying (can be changed in different firmware versions)! Not supported.
STR unitNodeControllerFWVersion	1.3.6.1.4.1.211.1.31.1.1.1.3.1.1.13	DisplayString	read-only	The FW version of the remote management controller; Not supported.
INT nodeTableUpdateCount	1.3.6.1.4.1.211.1.31.1.1.1.3.2	INTEGER	read-only	Counter defining the update revision of the management node table. This counter is incremented with every table contents change/update.
INT managementChannelType	1.3.6.1.4.1.211.1.31.1.1.1.3.3	INTEGER	read-only	The type of the management channel currently used (this MIB instance).
managementProcessorTable	1.3.6.1.4.1.211.1.31.1.1.1.3.4		not-accessible	System management service processors
managementProcessors	1.3.6.1.4.1.211.1.31.1.1.1.3.4.1		not-accessible
INT spUnitId	1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
INT spProcessorNr	1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.2	INTEGER	read-only	Service processor number (index: 1..n)
STR spModelName	1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.3	DisplayString	read-only	Service processor model name
STR spFirmwareVersion	1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.4	DisplayString	read-only	Service processor firmware version / revision
INT spBatteryStatus	1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.5	INTEGER	read-only	Service processor backup battery status
INT spBatteryDischargeTime	1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.6	INTEGER	read-only	Maximum time (in seconds) this backup battery can discharged. after that a shutdown will be performed (-1 = unknown); Not supported.
CTR spTimeOnBattery	1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.7	Counter	read-only	Time (in seconds) the service processor is running on battery since power fail (will be cleared on power recovery); Not supported.
INT spDoBatteryChargeCycle	1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.8	INTEGER	read-write	Perform a discharge/charge cycle on the backup battery by writing a non-zero value. Reading this object just returns the value 0; Not supported.
GAU spBatteryChargeLevel	1.3.6.1.4.1.211.1.31.1.1.1.3.4.1.9	Gauge	read-only	Reads the current charge level of the rechargeable battery (in percent of the maximum capacity); Not supported.
managedUpsNodeTable	1.3.6.1.4.1.211.1.31.1.1.1.3.5		not-accessible	UPS nodes managed by the units; Not supported.
managedUpsNodes	1.3.6.1.4.1.211.1.31.1.1.1.3.5.1		not-accessible
INT upsUnitId	1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.1	INTEGER	read-only	Unit identifier (index: 1..n); Not supported.
INT upsNr	1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.2	INTEGER	read-only	UPS number (index: 1..n); Not supported.
STR upsVendorName	1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.3	DisplayString	read-only	UPS vendor name; Not supported.
STR upsModelName	1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.4	DisplayString	read-only	UPS model name; Not supported.
STR upsIpAddress	1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.5	DisplayString	read-only	UPS IP address (represented as string; may also contain an IP V6 address); Not supported.
STR upsMibRoot	1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.6	DisplayString	read-only	UPS MIB root OID; specifies the root OID of the MIB to be used to query UPS via SNMP (empty string if no SNMP agent available); Not supported.
STR upsSnmpCommunity	1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.7	DisplayString	read-only	UPS SNMP community name (empty string if no SNMP agent available); Not supported.
INT upsHttpPort	1.3.6.1.4.1.211.1.31.1.1.1.3.5.1.8	INTEGER	read-only	UPS HTTP interface port; specifies the TCP port number for accessing the UPS management interface via HTTP (0 if no HTTP server available); Not supported.
STR managementTimeZone	1.3.6.1.4.1.211.1.31.1.1.1.3.6	DisplayString	read-only	Management node timezone (e.g. '2004-9-22 12:15:18+09:00')
serverInformation	1.3.6.1.4.1.211.1.31.1.1.1.4
serverTable	1.3.6.1.4.1.211.1.31.1.1.1.4.1		not-accessible	Table containing information about the available servers
servers	1.3.6.1.4.1.211.1.31.1.1.1.4.1.1		not-accessible
INT srvUnitId	1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
INT srvPhysicalMemory	1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.2	INTEGER	read-only	Size of physical main memory installed (MBytes); Not supported.
INT srvLastBootResult	1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.3	INTEGER	read-only	Result of last system boot; Not supported.
INT srvCurrentBootStatus	1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.4	INTEGER	read-only	Status of the current boot unknown(1)' returns; during the Power-on->POST and the shutdown->Power-off.
INT srvShutdownCommand	1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.5	INTEGER	read-write	Shutdown the server and switch off or reset; a delay (see object below) can be defined before the command is being executed; on reading that value you get the currently pending or executing command value; argument tells what kind of action: power-on: switch power on power-off: switch power off power-cycle: switch power off and switch power on again. shutdown-and-off: execute a shutdown then power off shutdown-and-reset: execute a shutdown then reset shutdown-and-power-cycle: execute a shutdown then power off and on again raise-nmi: raise an NMI (normally causes debugger to start) The value unknown(1) cannot be set; Not supported.
INT srvShutdownDelay	1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.6	INTEGER	read-write	Delay time (seconds) the agent waits before executing the shutdown command (see previous command). 0 = immediate action; no delay -1 = unknown (delay not supported) The value unknown(-1) cannot be set; Not supported.
STR srvUUID	1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.7	DisplayString	read-only	Universal Unique ID (UUID) number - this is a world wide unique ID number of the server. Can be used for identifying a server. The format is like this: 157E465A-A4AC-D711-A847-DD85CECD12EC.
INT srvPhysicalMemoryOs	1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.8	INTEGER	read-only	Size of physical main memory available to the operating system (MBytes). This value is similar to sc2srvPhysicalMemory'; but may be less if the system has mirror or hot spare memory modules; Not supported.
INT srvTpmMode	1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.9	INTEGER	read-only	Trusted Platform Module(TPM) setting.
STR srvManagementIP	1.3.6.1.4.1.211.1.31.1.1.1.4.1.1.10	DisplayString	read-only	BMC management address (e.g. 192.168.0.150)
unitPowerOnOffTable	1.3.6.1.4.1.211.1.31.1.1.1.4.2		not-accessible	Unit power-on and -off information
unitPowerOnOff	1.3.6.1.4.1.211.1.31.1.1.1.4.2.1		not-accessible
INT ooUnitId	1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
INT powerOnOffStatus	1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.2	INTEGER	read-only	Current power on/off status
INT lastPowerOffSource	1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.3	INTEGER	read-only	Reason why the system was switched off last time; Not supported.
INT lastPowerOnSource	1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.4	INTEGER	read-only	Source the system was switched on from; Not supported.
INT lastPowerOnTime	1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.5	INTEGER	read-only	Time and Date the system was booted (seconds since 1/1/1970; -1 = unknown); Not supported.
INT powerOnCounts	1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.6	INTEGER	read-only	Tells how often the server was switched on in its life (-1 = unknown); Not supported.
INT powerOnDuration	1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.7	INTEGER	read-only	Tells how long the system has stayed ON in its life (in hours; -1 = unknown); Not supported.
INT powerOffDuration	1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.8	INTEGER	read-only	Tells how long the system has stayed OFF in its life (in hours; -1 = unknown); Not supported.
INT powerFailRecovery	1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.9	INTEGER	read-only	Action on AC power recovery after AC has failed. not-available(2) : function not available; behavior is hardware-defined. as-before(3) : server gets the same power state as before the AC fail. remain-off(4) : server remains off on power resume. switch-on(5) : server is always switched on on power resume. schedule-sync(6) : server synchronizes the power state with the schedule setting.
INT powerCommand	1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.10	INTEGER	read-write	Switch the unit on or off; argument tells what kind of action: on: switch power on off: switch power off power-cycle: switch power off and switch power on again. The value unknown(1) cannot be set; Not supported.
INT powerSupplyRedundancy	1.3.6.1.4.1.211.1.31.1.1.1.4.2.1.11	INTEGER	read-only	Specifies whether the power supply system contains redundant power supplies: 0 : no redundant power supplies available 1 : redundant power supplies available
performanceTable	1.3.6.1.4.1.211.1.31.1.1.1.4.3		not-accessible	Server performance and utilization information; Not supported.
performance	1.3.6.1.4.1.211.1.31.1.1.1.4.3.1		not-accessible
INT perfUnitId	1.3.6.1.4.1.211.1.31.1.1.1.4.3.1.1	INTEGER	read-only	Unit identifier (index; 1..n); Not supported.
INT perfNr	1.3.6.1.4.1.211.1.31.1.1.1.4.3.1.2	INTEGER	read-only	Server performance entry number (index; 1..n)
INT perfType	1.3.6.1.4.1.211.1.31.1.1.1.4.3.1.3	INTEGER	read-only	Server performance object type (description see below); Not supported.
GAU performanceValue	1.3.6.1.4.1.211.1.31.1.1.1.4.3.1.4	Gauge	read-only	Server performance value (value interpretation depending on type):; Not supported. cpu: Load of a single CPU in percent cpu-overall: Overall CPU load in percent pci-load: PCI bus load in percent pci-efficiency: PCI bus efficiency in percent (100% is optimum) pci-transfer: PCI bus transfer rate in MBytes/sec. memory-physical: Physical memory usage in MBytes memory-total: Total memory usage (physical + virtual) in MBytes memory-percent: Physical memory usage in percent
STR performanceName	1.3.6.1.4.1.211.1.31.1.1.1.4.3.1.5	DisplayString	read-only	Name (short description) of the performance value (e.g. 'CPU1'). Can be used for displaying a list of performance values in the management frontend; Not supported.
timerOnOffTable	1.3.6.1.4.1.211.1.31.1.1.1.4.4		not-accessible	Power on/off timer table; Not supported.
timerOnOff	1.3.6.1.4.1.211.1.31.1.1.1.4.4.1		not-accessible
INT tooUnitId	1.3.6.1.4.1.211.1.31.1.1.1.4.4.1.1	INTEGER	read-only	Unit identifier (index: 1..n); Not supported.
INT tooDayOfWeek	1.3.6.1.4.1.211.1.31.1.1.1.4.4.1.2	INTEGER	read-only	Day of the week the times should act upon (index); 1=Sunday 2=Monday... ; Not supported.
INT onTime	1.3.6.1.4.1.211.1.31.1.1.1.4.4.1.3	INTEGER	read-write	Time the system should be switched on (by the real-time clock; in minutes since midnight; -1 = disabled; no on time). Only values -1 and 0..1439 are allowed; Not supported.
INT offTime	1.3.6.1.4.1.211.1.31.1.1.1.4.4.1.4	INTEGER	read-write	Time the system should be switched off (by the real-time clock of software; in minutes since midnight; -1 = disabled; no on time). Only values -1 and 0..1439 are allowed; Not supported.
powerMonitoringTable	1.3.6.1.4.1.211.1.31.1.1.1.4.5		not-accessible	Power monitoring table
powerMonitoring	1.3.6.1.4.1.211.1.31.1.1.1.4.5.1		not-accessible
INT pmUnitId	1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
TRU pmCurrentPowerMonitoringAvailable	1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.2	TrueFalse	read-only	Power monitoring and control available on this server: true: Power monitoring and power control is available false: Power monitoring and power control is not available
TRU pmCurrentPowerMonitoringEnabled	1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.3	TrueFalse	read-only	Power monitoring enable value: true: Power monitoring and data gathering is enabled false: Power monitoring and data gathering is disabled or not available
INT pmNominalPowerConsumption	1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.4	INTEGER	read-only	Nominal (maximum) value of the system's power consumption (in Watts; -1 if value not available)
GAU pmCurrentPowerConsumption	1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.5	Gauge	read-only	Current value of the system's power consumption (in Watts; 4294967295(0xffffffff) if value not available)
INT pmCurrentPowerControl	1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.6	INTEGER	read-only	Power mode control value; Not supported. disabled: The baseboard management controller does not control the power saving behaviour best-performance: The baseboard management controller gives best performance to the system (power consumption may be increased) minimum-power: The baseboard management controller controls the system in way to consume minimum power (performance may be reduced) automatic: The baseboard management controller automatically controls power consumption between good performance and low power consumption scheduled: The baseboard management controller controls power consumption by schedule
INT pmPowerLimitThreshold	1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.8	INTEGER	read-only	Maximum limit value of the system's power consumption (in Watts; -1 if value not available; only valid if limiting enabled)
INT pmPowerControlMode	1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.11	INTEGER	read-only	Configured power control mode value: disabled: The management controller does not control the power saving behaviour best-performance: The management controller gives best performance to the system (power consumption may be increased) minimum-power: The management controller controls the system in way to consume minimum power (performance may be reduced) automatic: The management controller automatically controls power consumption between good performance and low power consumption scheduled: The management controller controls power consumption by schedule limited: The management controller controls power consumption by power limit low-noise: The management controller controls the power to ensure running
INT pmPowerDisplayUnit	1.3.6.1.4.1.211.1.31.1.1.1.4.5.1.12	INTEGER	read-only	Configurd unit for the display of power consumption values: Watt: Power consumption values are displayed in Watts Btu/h: Power consumption values are displyed in Btu
utilizationHistoryTable	1.3.6.1.4.1.211.1.31.1.1.1.4.6		not-accessible	Utilization history table (for power consumption); table only contains existing values (no values for non-existing values); Not supported.
utilizationHistory	1.3.6.1.4.1.211.1.31.1.1.1.4.6.1		not-accessible
INT uthUnitId	1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.1	INTEGER	read-only	Unit identifier (index; 1..n); Not supported.
INT uthEntity	1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.2	INTEGER	read-only	Utilization value entity; describes what kind of value to be requested; Not supported. powerConsumptionDay: power consumption values of the last 24 hours; one value (Watts) per minute powerConsumptionMonth: power consumption values of the last month; one value (Watts) per hour powerConsumptionYear: power consumption values of the last year; one value (Watts) per day
INT uthTimeStamp	1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.3	INTEGER	read-only	Time stamp of the currenty history entry (time_t = seconds since 1/1/1970; 0:00 AM); Not supported.
STR uthHardwareUUID	1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.4	DisplayString	read-only	UUID of the hardware instance that delivered the value (from object sc2srvUUID); may change if an installation is migrated to another hardware (e.g. in blade environments); Not supported.
GAU uthAverageValue	1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.5	Gauge	read-only	Average value (in Watts) within the monitored time period (minute; hour; day); Not supported.
GAU uthMinValue	1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.6	Gauge	read-only	Minimum (lowest) value within the monitored time period; Not supported.
GAU uthMaxValue	1.3.6.1.4.1.211.1.31.1.1.1.4.6.1.7	Gauge	read-only	Maximum (highest) value within the monitored time period; Not supported.
powerSourceInformationTable	1.3.6.1.4.1.211.1.31.1.1.1.4.7		not-accessible	Power source information table
powerSourceInformation	1.3.6.1.4.1.211.1.31.1.1.1.4.7.1		not-accessible
INT psiUnitId	1.3.6.1.4.1.211.1.31.1.1.1.4.7.1.1	INTEGER	read-only	Unit identifier (index; 1..n)
STR psiPowerSourceType	1.3.6.1.4.1.211.1.31.1.1.1.4.7.1.2	DisplayString	read-only	System input power source type (e.g. 'AC'; 'DC')
INT psiPowerSourcePhase	1.3.6.1.4.1.211.1.31.1.1.1.4.7.1.3	INTEGER	read-only	System input phase of power source.
INT psiPowerSourceVoltage	1.3.6.1.4.1.211.1.31.1.1.1.4.7.1.4	INTEGER	read-only	System nominal input voltage of power source (in Volts; -1 if value not available).
environment	1.3.6.1.4.1.211.1.31.1.1.1.5
temperatureSensorTable	1.3.6.1.4.1.211.1.31.1.1.1.5.1		not-accessible	Temperature sensors
temperatureSensors	1.3.6.1.4.1.211.1.31.1.1.1.5.1.1		not-accessible
INT tempUnitId	1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
INT tempSensorNr	1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.2	INTEGER	read-only	Temperature sensor number (index: 0..n)
STR tempSensorDesignation	1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.3	DisplayString	read-only	Temperature sensor designation (e.g. SB#0-CPU#A0 Temp.)
STR tempSensorIdentifier	1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.4	DisplayString	read-only	Temperature sensor identification string (e.g. TEMP-RSB1); Not supported.
INT tempSensorStatus	1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.5	INTEGER	read-only	Status of the temperature sensor Status mapping. SEL level MIB Value Warning temperature-warning(6) Error temperature-critical(7) Error failed(5)
INT tempCurrentTemperature	1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.6	INTEGER	read-only	Current temperature at this sensor (degrees Celsius). This object returns 0; if the agent can not get the value.
INT tempWarningLevel	1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.7	INTEGER	read-only	Maximum temperature - warning level (degrees Celsius)
INT tempCriticalLevel	1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.8	INTEGER	read-only	Maximum temperature - critical level (degrees Celsius). system shutdown may occur if this level is exceeded.
INT tempCriticalReaction	1.3.6.1.4.1.211.1.31.1.1.1.5.1.1.9	INTEGER	read-only	Reaction if temperature exceeds the critical level.
fanTable	1.3.6.1.4.1.211.1.31.1.1.1.5.2		not-accessible	Fans
fans	1.3.6.1.4.1.211.1.31.1.1.1.5.2.1		not-accessible
INT fanUnitId	1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
INT fanNr	1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.2	INTEGER	read-only	Fan number (index: 0..n)
STR fanDesignation	1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.3	DisplayString	read-only	Fan designation (e.g. FAN-TRAY#00-Fan#00-1)
STR fanIdentifier	1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.4	DisplayString	read-only	Fan identification string (e.g. FAN-1-POWERSUPPLY); Not supported.
INT fanStatus	1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.5	INTEGER	read-only	Status of the fan Status mapping. SEL level MIB Value Error failed(5)
INT fanCurrentSpeed	1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.6	INTEGER	read-only	Current fan speed (revolutions per minute). This object returns 0; if the agent can not get the value.
INT fanQuality	1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.7	INTEGER	read-only	Quality of fan (in percent of nominal speed - measured at full speed); Not supported.
INT fanFailReaction	1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.8	INTEGER	read-only	Reaction if the fan fails.
INT fanFailShutdownDelay	1.3.6.1.4.1.211.1.31.1.1.1.5.2.1.9	INTEGER	read-write	Delay time (in seconds) when shutdown should commit on fan fail (if shutdown-and-off is configured; 0 = immediately -1 = unknown; cannot be set); Not supported.
airflowTable	1.3.6.1.4.1.211.1.31.1.1.1.5.3		not-accessible	Exhaust airflow volume table
airflow	1.3.6.1.4.1.211.1.31.1.1.1.5.3.1		not-accessible
INT afUnitId	1.3.6.1.4.1.211.1.31.1.1.1.5.3.1.1	INTEGER	read-only	Unit identifier (index; 1..n)
INT afExhaustAirflowVolume	1.3.6.1.4.1.211.1.31.1.1.1.5.3.1.2	INTEGER	read-only	System exhaust airflow volume ('-1' if value not available)
STR afExhaustAirflowVolumeUnit	1.3.6.1.4.1.211.1.31.1.1.1.5.3.1.3	DisplayString	read-only	System exhaust airflow volume unit (e.g. 'cbm/h'; 'ccm/min'; ...)
hardware	1.3.6.1.4.1.211.1.31.1.1.1.6
systemBoardTable	1.3.6.1.4.1.211.1.31.1.1.1.6.1		not-accessible	System board (main board) information
systemBoard	1.3.6.1.4.1.211.1.31.1.1.1.6.1.1		not-accessible
INT sbUnitId	1.3.6.1.4.1.211.1.31.1.1.1.6.1.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
STR systemBoardModelName	1.3.6.1.4.1.211.1.31.1.1.1.6.1.1.2	DisplayString	read-only	Model name (e.g. 'System Board')
STR systemBoardProductNumber	1.3.6.1.4.1.211.1.31.1.1.1.6.1.1.3	DisplayString	read-only	Product number (may be identical to ModelName)
STR systemBoardRevision	1.3.6.1.4.1.211.1.31.1.1.1.6.1.1.4	DisplayString	read-only	Revision string (e.g. 'WGS1 GS3')
STR systemBoardSerialNumber	1.3.6.1.4.1.211.1.31.1.1.1.6.1.1.5	DisplayString	read-only	Serial number (not available for all boards)
powerSupplyTable	1.3.6.1.4.1.211.1.31.1.1.1.6.2		not-accessible	Power supplies
powerSupply	1.3.6.1.4.1.211.1.31.1.1.1.6.2.1		not-accessible
INT psUnitId	1.3.6.1.4.1.211.1.31.1.1.1.6.2.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
INT psPowerSupplyNr	1.3.6.1.4.1.211.1.31.1.1.1.6.2.1.2	INTEGER	read-only	Power supply (bay) number (index: 0..n)
STR powerSupplyDesignation	1.3.6.1.4.1.211.1.31.1.1.1.6.2.1.3	DisplayString	read-only	Power supply designation (e.g. PWRSYS#1-FEP#0)
STR powerSupplyIdentifier	1.3.6.1.4.1.211.1.31.1.1.1.6.2.1.4	DisplayString	read-only	Power supply identification string (e.g. PS1); Not supported.
INT powerSupplyStatus	1.3.6.1.4.1.211.1.31.1.1.1.6.2.1.5	INTEGER	read-only	Power supply status Status mapping. SEL level MIB Value Warning ac-fail(5) Warning predictive-fail(9) Error failed(4) Error not-manageable(8)
voltageTable	1.3.6.1.4.1.211.1.31.1.1.1.6.3		not-accessible	Voltages - all voltage values are in 1/100th Volts; a value of 330 means 3.30 Volts (0xffffffff = unknown)
voltages	1.3.6.1.4.1.211.1.31.1.1.1.6.3.1		not-accessible
INT voUnitId	1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
INT voSensorNr	1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.2	INTEGER	read-only	Voltage sensor number (index: 0..n)
STR voltageDesignation	1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.3	DisplayString	read-only	Voltage designation string (e.g. SB#1-+5V#1)
INT voltageStatus	1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.4	INTEGER	read-only	Voltage status Status mapping. SEL level MIB Value Warning low-warning(7) Warning high-warning(8) Error too-low(4) Error too-high(5)
INT voltageCurrentValue	1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.5	INTEGER	read-only	Voltage current value. This object returns 0; if the agent can not get the value.(1/100V)
INT voltageNominalValue	1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.6	INTEGER	read-only	Voltage nominal value; Not supported.
INT voltageMinimumLevel	1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.7	INTEGER	read-only	Voltage minimum level (1/100V)
INT voltageMaximumLevel	1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.8	INTEGER	read-only	Voltage maximum level (1/100V)
GAU voltageCurrentLoad	1.3.6.1.4.1.211.1.31.1.1.1.6.3.1.9	Gauge	read-only	Current output load on this voltage line. in percent of the maximum load (0xffffffff = unknown); Not supported.
cpuTable	1.3.6.1.4.1.211.1.31.1.1.1.6.4		not-accessible	CPU description table
cpus	1.3.6.1.4.1.211.1.31.1.1.1.6.4.1		not-accessible
INT cpuUnitId	1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
INT cpuNr	1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.2	INTEGER	read-only	CPU (socket) number (index: 0..n)
STR cpuDesignation	1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.3	DisplayString	read-only	CPU designation (e.g. SB#0-CPU#A0)
INT cpuStatus	1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.4	INTEGER	read-only	CPU status Status mapping. SEL level MIB Value Warning disabled(4) Warning prefailed-warning(8) Error failed(6)
STR cpuModelName	1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.5	DisplayString	read-only	CPU model name (e.g. Itanium2 Processor)
STR cpuManufacturer	1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.6	DisplayString	read-only	CPU manufacturer name (e.g. Intel); Not supported.
STR cpuStep	1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.7	DisplayString	read-only	CPU step / revision
INT cpuCurrentSpeed	1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.8	INTEGER	read-only	CPU speed (frequency in MHz)
INT cpuNumberLogicals	1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.9	INTEGER	read-only	Number of (physically available) logical CPUs within one physical CPU (for hyper-threading and multi-core CPUs). This is the sum of all cores and all logical CPUs of a hyper-threading CPU; Not supported.
INT cpuCacheL1Size	1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.10	INTEGER	read-only	Size of first level cache (in kBytes; -1 if unknown); Not supported.
INT cpuCacheL2Size	1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.11	INTEGER	read-only	Size of second level cache (in kBytes; -1 if unknown); Not supported.
INT cpuCacheL3Size	1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.12	INTEGER	read-only	Size of third level cache (in kBytes; -1 if unknown)
INT cpuNumberCores	1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.13	INTEGER	read-only	Number of (physically available) cores within one physical CPU (for multi-core CPUs; platform dependent)
INT cpuFamily	1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.14	INTEGER	read-only	CPU family code. This enumerated value is specified by the DMTF SMBIOS specification (processor information; type 4); Not supported.
INT cpuEnabledCores	1.3.6.1.4.1.211.1.31.1.1.1.6.4.1.15	INTEGER	read-only	Number of effectively enabled cores within one physical CPU (for multi-core CPUs; 0 if unknown)
memoryModuleTable	1.3.6.1.4.1.211.1.31.1.1.1.6.5		not-accessible	Main memory module table
memoryModules	1.3.6.1.4.1.211.1.31.1.1.1.6.5.1		not-accessible
INT memUnitId	1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
INT memModuleNr	1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.2	INTEGER	read-only	Memory module (socket) number (index: 0..n)
STR memModuleDesignation	1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.3	DisplayString	read-only	Memory module designation (e.g. SB#0-DIMM#0A0)
INT memModuleStatus	1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.4	INTEGER	read-only	Memory module status Status mapping. SEL level MIB Value Warning failed-disabled(4) Warning warning(7) Error error(5) Error configuration-error(9)
INT memModuleBank	1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.5	INTEGER	read-only	Memory module bank number (-1 if unknown); Not supported.
INT memModuleCapacity	1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.6	INTEGER	read-only	Memory module size (capacity in MBytes; -1 if unknown)
INT memModuleStartAddress	1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.7	INTEGER	read-only	Memory module start address (in MBytes; -1 if unknown); Not supported.
STR memModuleForm	1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.8	DisplayString	read-only	Memory module form (SIMM DIMM ...); Not supported.
STR memModuleType	1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.9	DisplayString	read-only	Memory module type (SDRAM DDRAM DDR2 DDR3 ...); Not supported.
CTR memModuleCorrErrors	1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.10	Counter	read-only	Number of memory module correctable errors (-1 if unknown); Not supported.
CTR memModuleUncorrErrors	1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.11	Counter	read-only	Number of memory module uncorrectable errors (-1 if unknown); Not supported.
INT memModuleApproved	1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.12	INTEGER	read-only	Memory module approved for this machine; Not supported.
INT memModuleConfiguration	1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.13	INTEGER	read-only	Memory module configuration; Not supported. unknown(1): Module configuration could not be evaluated normal(2): Module is in normal non-redundant configuration or slot is empty disabled(3): Module is disabled (manually through BIOS setup) hotSpare(4): Module is a hot-spare (standby) module; which will be used as a run-time-replacement for failed modules mirror(5): Module is part of a mirror configuration raid(6): Module is part of a RAID configuration notUsable(7): Module is not usable in the actual configuration because of architectural restrictions This object replaces the previous redundancy status values hot-spare and mirror in sc2memModuleStatus.
INT memModuleFrequency	1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.14	INTEGER	read-only	Memory module actual front side bus frequency (in MHz; -1 if unknown). This value is based on the BIOS settings; Not supported.
INT memModuleMaxFrequency	1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.15	INTEGER	read-only	Memory module maximum front side bus frequency (in MHz; -1 if unknown). This value is based on memory module SPD data; Not supported.
STR memModuleVoltInterface	1.3.6.1.4.1.211.1.31.1.1.1.6.5.1.16	DisplayString	read-only	Memory module interface voltage interface description; Not supported.
INT cpuMultithreadEnable	1.3.6.1.4.1.211.1.31.1.1.1.6.6	INTEGER	read-only	Multithreading of CPU enabled; Not supported.
componentPowerConsumptionTable	1.3.6.1.4.1.211.1.31.1.1.1.6.7		not-accessible	Table of component power consumption data; Not supported.
componentPowerConsumption	1.3.6.1.4.1.211.1.31.1.1.1.6.7.1		not-accessible
INT cpcUnitId	1.3.6.1.4.1.211.1.31.1.1.1.6.7.1.1	INTEGER	read-only	Unit identifier (index; 1..n); Not supported.
INT cpcComponentClass	1.3.6.1.4.1.211.1.31.1.1.1.6.7.1.2	INTEGER	read-write	Component class enumeration (based on IPMI v1.0 entity ID); Not supported.
INT cpcComponentIndex	1.3.6.1.4.1.211.1.31.1.1.1.6.7.1.3	INTEGER	read-only	Component index within class (1..n); Not supported.
STR cpcDesignation	1.3.6.1.4.1.211.1.31.1.1.1.6.7.1.4	DisplayString	read-only	Component designation; Not supported.
INT cpcCurrentValue	1.3.6.1.4.1.211.1.31.1.1.1.6.7.1.5	INTEGER	read-only	Current component power consumption in Watts; Not supported.
trustedPlatformModuleTable	1.3.6.1.4.1.211.1.31.1.1.1.6.8		not-accessible	Trusted Platform Module (TPM) status information (see corresponding TPM specification for detailed description of these states)
INT tpmUnitId	1.3.6.1.4.1.211.1.31.1.1.1.6.8.1	INTEGER	read-only	Unit identifier (index: 1..n)
trustedPlatformModule	1.3.6.1.4.1.211.1.31.1.1.1.6.8.1		not-accessible
TRU tpmHardwareAvailable	1.3.6.1.4.1.211.1.31.1.1.1.6.8.2	TrueFalseUnknown	read-only	TPM hardware is available ('unknown' if hardware availability cannot be detected; no interface found)
TRU tpmBiosEnabled	1.3.6.1.4.1.211.1.31.1.1.1.6.8.3	TrueFalseUnknown	read-only	TPM hardware is enabled by BIOS ('unknown' if hardware is not available; a reboot is required to change this value)
TRU tpmEnabled	1.3.6.1.4.1.211.1.31.1.1.1.6.8.4	TrueFalseUnknown	read-only	TPM is enabled (by software; cannot take ownership if disabled; 'unknown' if hardware is not available or disabled)
TRU tpmActivated	1.3.6.1.4.1.211.1.31.1.1.1.6.8.5	TrueFalseUnknown	read-only	TPM is activated (by software; 'unknown' if hardware is not available or disabled)
TRU tpmOwnership	1.3.6.1.4.1.211.1.31.1.1.1.6.8.6	TrueFalseUnknown	read-only	TPM ownership is established (valid endorsement key is existing; 'unknown' if hardware is not available or disabled)
recovery	1.3.6.1.4.1.211.1.31.1.1.1.7
messageLogTable	1.3.6.1.4.1.211.1.31.1.1.1.7.1		not-accessible	Error and event message handling; Not supported.
messageLogs	1.3.6.1.4.1.211.1.31.1.1.1.7.1.1		not-accessible
INT msgUnitId	1.3.6.1.4.1.211.1.31.1.1.1.7.1.1.1	INTEGER	read-only	Unit identifier (index: 1..n); Not supported..
INT msgLogEntryNr	1.3.6.1.4.1.211.1.31.1.1.1.7.1.1.2	INTEGER	read-only	Message log entry number (index: 0..n); Not supported..
OCT msgLogEntryData	1.3.6.1.4.1.211.1.31.1.1.1.7.1.1.3	OCTET STRING	read-only	Message log entry data (binary; one message per table entry); Not supported..
watchdogTable	1.3.6.1.4.1.211.1.31.1.1.1.7.2		not-accessible	Watchdogs
watchdogs	1.3.6.1.4.1.211.1.31.1.1.1.7.2.1		not-accessible
INT wdUnitId	1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
INT watchdogType	1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.2	INTEGER	read-only	Watchdog type
INT watchdogStatus	1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.3	INTEGER	read-only	Watchdog status
INT watchdogEnable	1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.4	INTEGER	read-only	Enable/disable watchdog
INT watchdogTime	1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.5	INTEGER	read-only	Watchdog timeout period in seconds
INT watchdogAction	1.3.6.1.4.1.211.1.31.1.1.1.7.2.1.6	INTEGER	read-only	Watchdog timeout action
recoverySettingTable	1.3.6.1.4.1.211.1.31.1.1.1.7.3		not-accessible	ASR&R (Automatic server recovery and restart) settings; Not supported.
recoverySettings	1.3.6.1.4.1.211.1.31.1.1.1.7.3.1		not-accessible
INT asrUnitId	1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.1	INTEGER	read-only	Unit identifier (index: 1..n); Not supported.
INT asrNrRebootRetries	1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.2	INTEGER	read-write	Current number of retries to reboot/restart the server when a failure shutdown (and power-off) had occurred. After this number of retries the action defined in 'sc2asrRebootFailAction' will be executed (-1 = unknown; no retries). The value unknown(1) cannot be set; a SET will deliver 'badValue'; Not supported.
INT asrDefaultRebootRetries	1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.3	INTEGER	read-write	Default number of retries for server failure reboot. The previous object sc2asrNrRebootRetries will be set to this value after the server is working properly for a certain amount of time; Not supported.
INT asrNextBootSource	1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.4	INTEGER	read-write	Source medium to boot from (next time): operating-system: boot from floppy or hard disk diag-system: boot from alternate diagnostic system (only for SCSI systems; load diagnostic system from alternate IDE disk). remote-disk: boot from remote network disk The value unknown(1) cannot be set; a SET will deliver 'badValue'; Not supported.
INT asrRebootFailAction	1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.5	INTEGER	read-write	Specifies the action after a specified number of failed reboot retries (the object 'sc2asrNrRebootRetries' has reached zero).The value no-diag-system(4) means that a diagnostic system is not available; no other value can be set. The values unknown(1) and reserved(3) cannot be set; a SET will deliver 'badValue'; Not supported.
INT asrRestartDelay	1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.6	INTEGER	read-write	Delay (in minutes) when the system should be automatically switched on again (by real-time clock) after an error power-off. Setting this value to zero means immediate restart (power-cycle only). You can disable automatic restart by setting the 'sc2asrRebootFailAction' to 'switch-off' and the 'sc2asrDefaultRebootRetries' to zero; Not supported.
INT asrPostErrorHalt	1.3.6.1.4.1.211.1.31.1.1.1.7.3.1.7	INTEGER	read-write	Describes what to do when a POST error has occurred (halt on any error; no halt on any error...). The values unknown(1) and other(9) cannot be set; a SET will deliver 'badValue'; Not supported.
messageTextLogTable	1.3.6.1.4.1.211.1.31.1.1.1.7.4		not-accessible	Error and event message handling; reported as text strings; Not supported.
messageTextLogs	1.3.6.1.4.1.211.1.31.1.1.1.7.4.1		not-accessible
INT msgTextLogUnitId	1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.1	INTEGER	read-only	Unit identifier (index: 1..n); Not supported.
INT msgTextLogLanguage	1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.2	INTEGER	read-only	Message log entry language (index; Windows language code); Not supported. e.g. 1031; 1033 for German; English (default; always available)
INT msgTextLogSeqNr	1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.3	INTEGER	read-only	Message log entry sequence number (index; 0..n); Not supported.
INT msgTextLogTimestamp	1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.4	INTEGER	read-only	Message log entry time stamp (time_t = seconds since 1/1/1970; 0:00 AM); Not supported.
STR msgTextLogMessage	1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.5	DisplayString	read-only	Message log entry message string (multi-byte string; multi-language; not every language may be implemented); Not supported.
INT msgTextLogErrorCode	1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.6	INTEGER	read-only	Message log entry error code; Not supported.
INT msgTextLogSeverity	1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.7	INTEGER	read-only	Message log entry severity; Not supported.
TRU msgTextLogCSSComponent	1.3.6.1.4.1.211.1.31.1.1.1.7.4.1.8	TrueFalse	read-only	Component which caused the log message may be replaced by the customer (CSS=Customer Self Service); Not supported.
messageLogActionHintTable	1.3.6.1.4.1.211.1.31.1.1.1.7.5		not-accessible	Action text strings for error and event messages; Not supported.
messageLogActionHints	1.3.6.1.4.1.211.1.31.1.1.1.7.5.1		not-accessible
INT mlaLanguage	1.3.6.1.4.1.211.1.31.1.1.1.7.5.1.1	INTEGER	read-only	Action text language (index; Windows language code) e.g. 1031; 1033 for German; English; Not supported.
INT mlaErrorCode	1.3.6.1.4.1.211.1.31.1.1.1.7.5.1.2	INTEGER	read-only	Action text error code (index); Not supported.
INT mlaType	1.3.6.1.4.1.211.1.31.1.1.1.7.5.1.3	INTEGER	read-only	Message log entry severity; Not supported.
INT mlaIndex	1.3.6.1.4.1.211.1.31.1.1.1.7.5.1.4	INTEGER	read-only	Action text entry string index (index; 1..n); Not supported.
STR mlaMessage	1.3.6.1.4.1.211.1.31.1.1.1.7.5.1.5	DisplayString	read-only	Action message string; Not supported.
status	1.3.6.1.4.1.211.1.31.1.1.1.8
INT agentStatus	1.3.6.1.4.1.211.1.31.1.1.1.8.1	INTEGER	read-only	Overall status of all monitored components in this agent ok(1): all subsystems and components working properly; no failure degraded(2): at least one component has a problem; system may still work properly error(3): severe problem; system will not work properly failed(4): one or more managed components have failed unknown(5): none of the subsystems had a valid status (e.g. during initialization)
statusComponentTable	1.3.6.1.4.1.211.1.31.1.1.1.8.2		not-accessible	Table with status values of the components in this agent. The table summarizes all instances of one component to one status value.
statusComponents	1.3.6.1.4.1.211.1.31.1.1.1.8.2.1		not-accessible
INT csUnitId	1.3.6.1.4.1.211.1.31.1.1.1.8.2.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
INT csType	1.3.6.1.4.1.211.1.31.1.1.1.8.2.1.2	INTEGER	read-only	Component status type
INT componentStatusValue	1.3.6.1.4.1.211.1.31.1.1.1.8.2.1.3	INTEGER	read-only	Component status value (for description of status values see previous object) Status mapping. SEL level MIB Value Warning degraded(2) Warning failed(4) Error error(5)
componentStatusSensorTable	1.3.6.1.4.1.211.1.31.1.1.1.8.3		not-accessible	This table contains the component status sensor table of the BMC (baseboard management controller). Additionally it also holds the CSS (Customer Self Service) information; Not supported.
componentStatusSensors	1.3.6.1.4.1.211.1.31.1.1.1.8.3.1		not-accessible
INT cssUnitId	1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.1	INTEGER	read-only	Unit identifier (index: 1..n); Not supported.
INT cssSensorNumber	1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.2	INTEGER	read-only	BMC component status sensor number (index; 1..n); Not supported.
STR cssSensorDesignation	1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.3	DisplayString	read-only	Component status sensor designation string; Not supported.
STR cssSensorDevice	1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.4	DisplayString	read-only	Name of device (entity) the component status sensor belongs to; Not supported.
INT cssSensorDeviceInstance	1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.5	INTEGER	read-only	Instance number of device (entity) the component status sensor belongs to; Not supported.
TRU cssSensorPhysicalLed	1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.6	TrueFalse	read-only	If set; component has a physical status LED showing the sensor status; Not supported.
TRU cssSensorCssComponent	1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.7	TrueFalse	read-only	If set; component may be replaced by the customer (CSS component); Not supported.
INT cssSensorStatus	1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.8	INTEGER	read-only	Status returned by the component status sensor; Not supported.
STR cssComponentServicePartId	1.3.6.1.4.1.211.1.31.1.1.1.8.3.1.9	DisplayString	read-only	Spare part number of the replaceable component; used to create a link to the spare part list on the service's spare part catalogue. This usually is the component's designation string; with blanks substituted by underscores; Not supported.
INT cssTableSize	1.3.6.1.4.1.211.1.31.1.1.1.8.4	INTEGER	read-only	Number of entries in the component status sensor table; Not supported.
maintenance	1.3.6.1.4.1.211.1.31.1.1.1.9
maintenanceObjectTable	1.3.6.1.4.1.211.1.31.1.1.1.9.1		not-accessible	Table containing some other maintenance objects.
maintenanceObjects	1.3.6.1.4.1.211.1.31.1.1.1.9.1.1		not-accessible
INT mtUnitId	1.3.6.1.4.1.211.1.31.1.1.1.9.1.1.1	INTEGER	read-only	Unit identifier (index: 1..n).
INT errorCounterStartTime	1.3.6.1.4.1.211.1.31.1.1.1.9.1.1.2	INTEGER	read-only	Memory module error counter start time (seconds since 1/1/1970; -1 if unknown). This is the time when the error counters were started or reset last time; Not supported.
INT sendTestTrap	1.3.6.1.4.1.211.1.31.1.1.1.9.1.1.3	INTEGER	read-write	Send a test trap (test alarm) to the manager application(s) to test connection and trap configuration; trap cannot be disabled. Initiate test trap sending by writing a non-zero value. Reading this object just returns the value 0; Not supported.
IP addTrapDestination	1.3.6.1.4.1.211.1.31.1.1.1.9.1.1.4	IpAddress	read-write	Add the specified IP address (of the management station) to the trap destination list of this server. That client will become an alarm receiver for traps of this server; Not supported.
INT mtMaintenanceStatus	1.3.6.1.4.1.211.1.31.1.1.1.9.1.1.5	INTEGER	read-only	maitenance status
firmwareVersionTable	1.3.6.1.4.1.211.1.31.1.1.1.9.2		not-accessible	Controller firmware version table
firmwareVersions	1.3.6.1.4.1.211.1.31.1.1.1.9.2.1		not-accessible
INT fwUnitId	1.3.6.1.4.1.211.1.31.1.1.1.9.2.1.1	INTEGER	read-only	Unit identifier (index: 1..n)
INT fwType	1.3.6.1.4.1.211.1.31.1.1.1.9.2.1.2	INTEGER	read-only	Controller/firmware type
STR fwModelName	1.3.6.1.4.1.211.1.31.1.1.1.9.2.1.3	DisplayString	read-only	Controller/firmware model name (e.g. 'Copernicus'...) TOTAL' shows all firmware version in system (including BIOS; BMC; MMB).
STR fwVersion	1.3.6.1.4.1.211.1.31.1.1.1.9.2.1.4	DisplayString	read-only	Controller/firmware version string (e.g. '3.81.02')
INT fwLocation	1.3.6.1.4.1.211.1.31.1.1.1.9.2.1.5	INTEGER	read-only	BMM physical number of controller/firmware on IOU.
deployment	1.3.6.1.4.1.211.1.31.1.1.1.10
deployInfoTable	1.3.6.1.4.1.211.1.31.1.1.1.10.1		not-accessible	Table with data of deployment information; Not supported.
deployInfo	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1		not-accessible
INT dplInfoUnitId	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.1	INTEGER	read-only	Unit identifier (index: 1..n); Not supported.
STR deployInfoChassisId	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.2	DisplayString	read-only	Chassis serial number; Not supported.
PHY deployInfoMacAddr1	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.3	PhysAddress	read-only	MAC address 1; Not supported.
PHY deployInfoMacAddr2	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.4	PhysAddress	read-only	MAC address 2; Not supported.
PHY deployInfoMacAddr3	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.5	PhysAddress	read-only	MAC address 3; Not supported.
PHY deployInfoMacAddr4	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.6	PhysAddress	read-only	MAC address 4; Not supported.
IP deployInfoIpAddr1	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.7	IpAddress	read-write	IP address 1; Not supported.
IP deployInfoIpAddr2	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.8	IpAddress	read-write	IP address 2; Not supported.
IP deployInfoIpAddr3	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.9	IpAddress	read-write	IP address 3; Not supported.
IP deployInfoIpAddr4	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.10	IpAddress	read-write	IP address 4; Not supported.
IP deployInfoNetMask1	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.11	IpAddress	read-write	IP subnet mask 1; Not supported.
IP deployInfoNetMask2	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.12	IpAddress	read-write	IP subnet mask 2; Not supported.
IP deployInfoNetMask3	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.13	IpAddress	read-write	IP subnet mask 3; Not supported.
IP deployInfoNetMask4	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.14	IpAddress	read-write	IP subnet mask 4; Not supported.
IP deployInfoGateway1	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.15	IpAddress	read-write	IP gateway 1; Not supported.
IP deployInfoGateway2	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.16	IpAddress	read-write	IP gateway 2; Not supported.
IP deployInfoGateway3	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.17	IpAddress	read-write	IP gateway 3; Not supported.
IP deployInfoGateway4	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.18	IpAddress	read-write	IP gateway 4; Not supported.
STR deployInfoHostname	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.19	DisplayString	read-write	Host name; Not supported.
STR deployInfoMasterImageReference	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.20	DisplayString	read-write	URL in UNC notification (but in ASCII) to remote image file (with the extensions of .img; .cfg; *.txt); Not supported.
INT deployInfoStatusOfBlade	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.21	INTEGER	read-write	Status of this server: power-down(2): waiting for boot standby(3): power management mode system-boot-failure(4): system boot failure bios-setup(5): BIOS setup or boot phase booting(6): ACPI OS currently booting ; Not supported.
INT deployInfoLanStatusOfSlot	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.22	INTEGER	read-write	Defines whether the IP-LAN definitions are valid or not; Not supported.
INT deployInfoAutomaticRecovery	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.23	INTEGER	read-write	Defines if this server blade should be provided automatic recovery; Not supported.
INT deployInfoStatusOfCloning	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.24	INTEGER	read-write	Status of current cloning process; Not supported.
INT deployInfoBootMode	1.3.6.1.4.1.211.1.31.1.1.1.10.1.1.25	INTEGER	read-write	Boot mode of the server for remote deployment: normal(2): boot from standard disk subsystem pxeBiosSetup(3): boot from PXE according to BIOS setup settings (for OEM systems) pxeLanx(y): boot from PXE LAN interface x (0..3) ; Not supported.
oemDeployInfoTable	1.3.6.1.4.1.211.1.31.1.1.1.10.2		not-accessible	Table with data of server OEM information; Not supported.
oemDeployInfo	1.3.6.1.4.1.211.1.31.1.1.1.10.2.1		not-accessible
INT odplInfoUnitId	1.3.6.1.4.1.211.1.31.1.1.1.10.2.1.1	INTEGER	read-only	Unit identifier (index: 1..n); Not supported.
INT odplParamId	1.3.6.1.4.1.211.1.31.1.1.1.10.2.1.2	INTEGER	read-only	OEM parameter ID (index: 1..10); Not supported.
STR oemDeployInfoParamData	1.3.6.1.4.1.211.1.31.1.1.1.10.2.1.3	DisplayString	read-write	OEM parameter data; Not supported.
deployLanInterfaceTable	1.3.6.1.4.1.211.1.31.1.1.1.10.3		not-accessible	Table with system LAN interfaces information: This table lists all real LAN interfaces in same physical order as the BIOS uses it for PXE boot. Only on-board interfaces are listed; no virtual interfaces.
deployLanInterfaces	1.3.6.1.4.1.211.1.31.1.1.1.10.3.1		not-accessible
INT dplLanUnitId	1.3.6.1.4.1.211.1.31.1.1.1.10.3.1.1	INTEGER	read-only	Unit identifier (index; 1..n)
INT dplLanInterfaceNr	1.3.6.1.4.1.211.1.31.1.1.1.10.3.1.2	INTEGER	read-only	LAN interface number (index; 0..n)
PHY dplLanMacAddress	1.3.6.1.4.1.211.1.31.1.1.1.10.3.1.3	PhysAddress	read-only	LAN interface hardware (MAC) address; ff:ff:ff:ff:ff:ff if value not available
partition	1.3.6.1.4.1.211.1.31.1.2

RFC description

Fujitsu PRIMEQUEST MMB (Modular Management Board) system management for servers and hardware inventory.

Start monitoring Fujitsu PRIMEQUEST server chassis (MMB service processor) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MMB-COM-MIB

What Is MMB-COM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

RFC description