MEDIA-MONITOR-MIB

All MIBs › MEDIA-MONITOR-MIB

Organization: xx

Last Updated: 2004-04-04

Description: MEDIA-MONITOR-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MEDIA-MONITOR-MIB?

MEDIA-MONITOR-MIB is a MIB dedicated to providing metrics for monitoring IP streaming media flows, per its module description, though the vendor/origin and specific object names are not identified in this excerpt (no sample objects were provided). Based on its stated purpose, it would be expected to expose per-stream performance metrics such as packet loss, jitter, and bitrate/throughput for streaming media sessions traversing the network. Its intended monitoring role is squarely performance/quality-of-experience visibility for media traffic — a software/traffic-layer concern rather than physical hardware health — used to detect degrading video/audio stream quality before end users notice it. No explicit MIB dependency is evident from the available description, though media-flow monitoring MIBs of this kind commonly build on RTP/RTCP-style metrics concepts. It would be deployed on network elements or media-monitoring probes positioned to observe IP streaming traffic in service-provider or enterprise video/voice delivery networks. Engineers can download the MEDIA-MONITOR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in MEDIA-MONITOR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

applies to network elements/probes monitoring IP streaming media flows, vendor unspecified

Monitoring Examples

Without sample objects available in this excerpt, a concrete polling scenario using real object names cannot be given; consistent with the stated module purpose, an operator would expect to monitor per-flow packet loss and jitter metrics for streaming media sessions to detect quality degradation, but the actual table/object names cannot be confirmed from this data.

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32
mib-2

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
mediaMonitorMIB	1.3.6.1.2.1.9930			The media Monitor MIB (MEDIA-MONITOR-MIB) provides Metrics for Monitoring IP streaming media Flows.
mediaMonitorObjects	1.3.6.1.2.1.9930.1
ipMediaStreamMonitorTable	1.3.6.1.2.1.9930.1.1		not-accessible	IP Stream Monitor Table. This table is indexed by the Stream Handle. This Table only shows the currently ACTIVE Streams.
ipMediaStreamMonitorEntry	1.3.6.1.2.1.9930.1.1.1		not-accessible	IP Stream Monitor Table Entry.
U32 ipMediaStreamHandle	1.3.6.1.2.1.9930.1.1.1.1	Unsigned32	read-only	Table is indexed by stream Handle. The table has one row for each Media Stream detected from the Ip Interface. The Stream Handle shall be a unique value for the life of the stream.
IP ipMediaStreamSourceIpAddress	1.3.6.1.2.1.9930.1.1.1.2	IpAddress	read-only	Source IpAddress for the Stream indexed by the Stream Handle.
U32 ipMediaStreamSourcePort	1.3.6.1.2.1.9930.1.1.1.3	Unsigned32	read-only	The Source port for the Stream indexed by the Stream Handle.
IP ipMediaStreamDestinationIpAddress	1.3.6.1.2.1.9930.1.1.1.4	IpAddress	read-only	Destination IpAddress for the Stream indexed by the Stream Handle.
U32 ipMediaStreamDestinationPort	1.3.6.1.2.1.9930.1.1.1.5	Unsigned32	read-only	The Destination port for the Stream indexed by the Stream Handle.
U32 ipMediaStreamBitRate	1.3.6.1.2.1.9930.1.1.1.6	Unsigned32	read-only	The nominal Bit Rate of the Media Stream in bits/second.
U32 ipMediaStreamInterval	1.3.6.1.2.1.9930.1.1.1.7	Unsigned32	read-only	The number indicates the minimum Interval in seconds for a good MDI Measurement. The Interval is based on the current Bit Rate of the Stream. The minimum interval should be chosen such that at least 10 IP packets occur per interval. This value defaults to 1 second and the Interval is typically configured to 1 second unless the above criteria is not met.
STR ipMediaStreamStartTime	1.3.6.1.2.1.9930.1.1.1.8	DisplayString	read-only	The Timestamp shows the Real time at which the stream was detected. The Timestamp format is YYYY/MM/DD/HH/MM/SS.
U32 ipMediaStreamMDIDelayFactor	1.3.6.1.2.1.9930.1.1.1.9	Unsigned32	read-only	This object displays the Media Delivery Index Delay Factor parameter in units of milliseconds. This parameter indicates the burstiness of the stream.
U32 ipMediaStreamMDILossRate	1.3.6.1.2.1.9930.1.1.1.10	Unsigned32	read-only	This object displays the Media Delivery Index Media Loss Rate in packets/sec. This parameter indicates rate of lost media packets of the of the stream.
U32 ipMediaStreamMDIDFThreshold	1.3.6.1.2.1.9930.1.1.1.11	Unsigned32	read-write	The Threshold for Media Delivery Index Delay Factor in milliSeconds. The default value is set to 0 indicating that it is invalid until configured.
U32 ipMediaStreamMDILRThreshold	1.3.6.1.2.1.9930.1.1.1.12	Unsigned32	read-write	The Threshold for Media Delivery Loss Rate in Packets/second. The default value is set to 0xffffffff indicating that it is invalid until configured.
U32 ipMediaStreamMDIDFErrorIntervals	1.3.6.1.2.1.9930.1.1.1.13	Unsigned32	read-only	The number indicates the number of MDI DF Threshold (ipMediaStreamMonitorMDIDFThreshold) Crossed Intervals during the life of a stream. This shall be 0 and invalid until the MDI DF Thresholds are configured.
U32 ipMediaStreamMDIMLRErrorIntervals	1.3.6.1.2.1.9930.1.1.1.14	Unsigned32	read-only	The number indicates the number of MDI MLR Threshold (ipMediaStreamMDILRThreshold)Crossed Intervals during the life of a stream. This shall be 0 and invalid until the MDI MLR Thresholds are configured.

RFC description

IneoQuest media monitoring MIB for IP streaming flow analysis metrics.

Start monitoring Network element/probe monitoring IP streaming media flows (vendor unspecified) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MEDIA-MONITOR-MIB

What Is MEDIA-MONITOR-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description