ME1200-SYNCE-MIB

All MIBs › ME1200-SYNCE-MIB

Organization: Cisco Systems, Inc

Last Updated: 2016-05-09

Category: Network Management

Description: Manages Synchronous Ethernet (SyncE) clock source configuration on Cisco ME1200 switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ME1200-SYNCE-MIB?

ME1200-SYNCE-MIB is a Cisco private MIB for the ME1200 Metro Ethernet switch that manages Synchronous Ethernet (SyncE) clock source selection for network timing distribution. It exposes global clock-selection configuration (selection mode, active source, WTR timer, SSM holdover/freerun state, EEC option), station clock input/output settings, and a table of nominated candidate clock sources. Its primary value is monitoring timing and hardware reference health: detecting whether the switch has lost its upstream reference and fallen back to holdover or free-run mode is a direct indicator of a broken synchronization chain that can disrupt mobile backhaul timing. It implements ITU-T G.8264/G.781 SyncE and SSM standards for synchronization status messaging. It is deployed in mobile backhaul and metro Ethernet networks that must deliver frequency synchronization to cellular base stations. Engineers can download the ME1200-SYNCE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ME1200-SYNCE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco ME1200 Metro Ethernet switch

Monitoring Examples

Reading me1200SynceConfigGlobalClockSelectionModeSource and SelectionMode shows which nominated clock source is currently active. me1200SynceConfigGlobalClockSelectionModeSsmHoldover and SsmFreerun reveal whether the switch has lost its reference and fallen into holdover or free-run mode, a sign the upstream timing chain has failed. me1200SynceConfigSourcesClockSourceNominationTable, indexed by SourceId, lists all candidate sources and their nomination state.

What Can Be Monitored

active clock selection source
clock selection mode (auto/forced)
holdover/freerun/SSM state
WTR timer value
station clock input/output config
nominated clock source list

Imported Objects

From CISCOME1200-MIB

me1200SwitchMgmt

OBJECT-IDENTITY

From ME1200-TC

ME1200InterfaceIndex
ME1200Unsigned8

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
me1200SynceMib	1.3.6.1.4.1.9.9.815.1.42			Private SyncE MIB.
me1200SynceMibObjects	1.3.6.1.4.1.9.9.815.1.42.1
me1200SynceCapabilities	1.3.6.1.4.1.9.9.815.1.42.1.1
me1200SynceCapabilitiesGlobal	1.3.6.1.4.1.9.9.815.1.42.1.1.1
U32 me1200SynceCapabilitiesGlobalSourceCount	1.3.6.1.4.1.9.9.815.1.42.1.1.1.1	Unsigned32	read-only	The number of SyncE sources supported by the device.
me1200SynceConfig	1.3.6.1.4.1.9.9.815.1.42.1.2
me1200SynceConfigGlobal	1.3.6.1.4.1.9.9.815.1.42.1.2.1
me1200SynceConfigGlobalClockSelectionMode	1.3.6.1.4.1.9.9.815.1.42.1.2.1.1
ME1 me1200SynceConfigGlobalClockSelectionModeSelectionMode	1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.1	ME1200synceSelectionMode	read-write	The selection mode.
U32 me1200SynceConfigGlobalClockSelectionModeSource	1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.2	Unsigned32	read-write	Nominated source for manuel selection mode.
U32 me1200SynceConfigGlobalClockSelectionModeWtrTime	1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.3	Unsigned32	read-write	WTR timer value in minutes. Range is 0 to 12 minutes where 0 means that the timer is disabled.
ME1 me1200SynceConfigGlobalClockSelectionModeSsmHoldover	1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.4	ME1200synceQualityLevel	read-write	Tx overwrite SSM used when clock controller is hold over.
ME1 me1200SynceConfigGlobalClockSelectionModeSsmFreerun	1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.5	ME1200synceQualityLevel	read-write	Tx overwrite SSM used when clock controller is free run.
ME1 me1200SynceConfigGlobalClockSelectionModeEecOption	1.3.6.1.4.1.9.9.815.1.42.1.2.1.1.6	ME1200synceEecOption	read-write	Synchronous Ethernet Equipment Clock option.
me1200SynceConfigGlobalStationClocks	1.3.6.1.4.1.9.9.815.1.42.1.2.1.2
ME1 me1200SynceConfigGlobalStationClocksStationClkOut	1.3.6.1.4.1.9.9.815.1.42.1.2.1.2.1	ME1200synceFrequency	read-write	Station clock output frequency setting.
ME1 me1200SynceConfigGlobalStationClocksStationClkIn	1.3.6.1.4.1.9.9.815.1.42.1.2.1.2.2	ME1200synceFrequency	read-write	Station clock input frequency setting.
me1200SynceConfigSources	1.3.6.1.4.1.9.9.815.1.42.1.2.2
me1200SynceConfigSourcesClockSourceNominationTable	1.3.6.1.4.1.9.9.815.1.42.1.2.2.1		not-accessible	This is the SyncE source nomination configuration.
me1200SynceConfigSourcesClockSourceNominationEntry	1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1		not-accessible	The sourceId index must be a value from 0 up to the number of sources minus one.
I32 me1200SynceConfigSourcesClockSourceNominationSourceId	1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.1	Integer32	not-accessible	-
T/F me1200SynceConfigSourcesClockSourceNominationNominated	1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.2	TruthValue	read-write	Indicates if source is nominated.
NUM me1200SynceConfigSourcesClockSourceNominationNetworkPort	1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.3	ME1200InterfaceIndex	read-write	Interface index of the norminated source.
ME1 me1200SynceConfigSourcesClockSourceNominationClkInPort	1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.4	ME1200Unsigned8	read-write	Clock input of the norminated source.
U32 me1200SynceConfigSourcesClockSourceNominationPriority	1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.5	Unsigned32	read-write	Priority of the nominated source.
ME1 me1200SynceConfigSourcesClockSourceNominationAnegMode	1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.6	ME1200synceAnegMode	read-write	Autonogotiation mode auto-master-slave.
ME1 me1200SynceConfigSourcesClockSourceNominationSsmOverwrite	1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.7	ME1200synceQualityLevel	read-write	SSM overwrite quality.
U32 me1200SynceConfigSourcesClockSourceNominationHoldoffTime	1.3.6.1.4.1.9.9.815.1.42.1.2.2.1.1.8	Unsigned32	read-write	Hold Off timer value in 100ms (3 - 18). Zero means no hold off.
me1200SynceConfigPorts	1.3.6.1.4.1.9.9.815.1.42.1.2.3
me1200SynceConfigPortsPortConfigTable	1.3.6.1.4.1.9.9.815.1.42.1.2.3.1		not-accessible	This is the SyncE port configuration.
me1200SynceConfigPortsPortConfigEntry	1.3.6.1.4.1.9.9.815.1.42.1.2.3.1.1		not-accessible	The portId index must be a value from 0 up to the number of ports minus one.
NUM me1200SynceConfigPortsPortConfigPortId	1.3.6.1.4.1.9.9.815.1.42.1.2.3.1.1.1	ME1200InterfaceIndex	not-accessible	-
T/F me1200SynceConfigPortsPortConfigSsmEnabled	1.3.6.1.4.1.9.9.815.1.42.1.2.3.1.1.2	TruthValue	read-write	Quality level via SSM enabled.
me1200SynceStatus	1.3.6.1.4.1.9.9.815.1.42.1.3
me1200SynceStatusGlobal	1.3.6.1.4.1.9.9.815.1.42.1.3.1
me1200SynceStatusGlobalClockSelectionMode	1.3.6.1.4.1.9.9.815.1.42.1.3.1.1
U32 me1200SynceStatusGlobalClockSelectionModeClockInput	1.3.6.1.4.1.9.9.815.1.42.1.3.1.1.1	Unsigned32	read-only	The clock source locked to when clock selector is in locked state.
ME1 me1200SynceStatusGlobalClockSelectionModeSelectorState	1.3.6.1.4.1.9.9.815.1.42.1.3.1.1.2	ME1200synceSelectorState	read-only	This is indicating the state of the clock selector.
T/F me1200SynceStatusGlobalClockSelectionModeLosx	1.3.6.1.4.1.9.9.815.1.42.1.3.1.1.3	TruthValue	read-only	LOSX
T/F me1200SynceStatusGlobalClockSelectionModeLol	1.3.6.1.4.1.9.9.815.1.42.1.3.1.1.4	TruthValue	read-only	Clock selector has raised the Los Of Lock alarm.
T/F me1200SynceStatusGlobalClockSelectionModeDhold	1.3.6.1.4.1.9.9.815.1.42.1.3.1.1.5	TruthValue	read-only	Clock selector has not yet calculated the holdover frequency offset to local oscillator.
me1200SynceStatusSources	1.3.6.1.4.1.9.9.815.1.42.1.3.2
me1200SynceStatusSourcesClockSourceNominationTable	1.3.6.1.4.1.9.9.815.1.42.1.3.2.1		not-accessible	This is the clock source nomination status.
me1200SynceStatusSourcesClockSourceNominationEntry	1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1		not-accessible	The sourceId index must be a value must be a value from 0 up to the number of sources minus one.
I32 me1200SynceStatusSourcesClockSourceNominationSourceId	1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1.1	Integer32	not-accessible	-
T/F me1200SynceStatusSourcesClockSourceNominationLocs	1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1.2	TruthValue	read-only	LOCS
T/F me1200SynceStatusSourcesClockSourceNominationFos	1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1.3	TruthValue	read-only	FOS
T/F me1200SynceStatusSourcesClockSourceNominationSsm	1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1.4	TruthValue	read-only	SSM
T/F me1200SynceStatusSourcesClockSourceNominationWtr	1.3.6.1.4.1.9.9.815.1.42.1.3.2.1.1.5	TruthValue	read-only	WTR
me1200SynceStatusPorts	1.3.6.1.4.1.9.9.815.1.42.1.3.3
me1200SynceStatusPortsPortStatusTable	1.3.6.1.4.1.9.9.815.1.42.1.3.3.1		not-accessible	This is the port status.
me1200SynceStatusPortsPortStatusEntry	1.3.6.1.4.1.9.9.815.1.42.1.3.3.1.1		not-accessible	The portId index must be a value must be a value from 0 up to the number of ports minus one.
NUM me1200SynceStatusPortsPortStatusPortId	1.3.6.1.4.1.9.9.815.1.42.1.3.3.1.1.1	ME1200InterfaceIndex	not-accessible	-
ME1 me1200SynceStatusPortsPortStatusSsmRx	1.3.6.1.4.1.9.9.815.1.42.1.3.3.1.1.2	ME1200synceQualityLevel	read-only	Monitoring of the received SSM QL on this port.
ME1 me1200SynceStatusPortsPortStatusSsmTx	1.3.6.1.4.1.9.9.815.1.42.1.3.3.1.1.3	ME1200synceQualityLevel	read-only	Monitoring of the transmitted SSM QL on this port.
T/F me1200SynceStatusPortsPortStatusMaster	1.3.6.1.4.1.9.9.815.1.42.1.3.3.1.1.4	TruthValue	read-only	If PHY is in 1000BaseT Mode then this is monitoring the master/slave mode.
me1200SynceStatusPtp	1.3.6.1.4.1.9.9.815.1.42.1.3.4
me1200SynceStatusPtpPortStatusTable	1.3.6.1.4.1.9.9.815.1.42.1.3.4.1		not-accessible	This is the PTP port status.
me1200SynceStatusPtpPortStatusEntry	1.3.6.1.4.1.9.9.815.1.42.1.3.4.1.1		not-accessible	The sourceId index must be a value must be a value from 0 up to the number of PTP sources minus one.
I32 me1200SynceStatusPtpPortStatusSourceId	1.3.6.1.4.1.9.9.815.1.42.1.3.4.1.1.1	Integer32	not-accessible	-
ME1 me1200SynceStatusPtpPortStatusSsmRx	1.3.6.1.4.1.9.9.815.1.42.1.3.4.1.1.2	ME1200synceQualityLevel	read-only	Monitoring of the received SSM QL on this port.
ME1 me1200SynceStatusPtpPortStatusPtsf	1.3.6.1.4.1.9.9.815.1.42.1.3.4.1.1.3	ME1200syncePtsfState	read-only	PTSF status for PTP source.
me1200SynceControl	1.3.6.1.4.1.9.9.815.1.42.1.4
me1200SynceControlSources	1.3.6.1.4.1.9.9.815.1.42.1.4.1
me1200SynceControlSourcesClockSourceTable	1.3.6.1.4.1.9.9.815.1.42.1.4.1.1		not-accessible	This is the SyncE sources control structure.
me1200SynceControlSourcesClockSourceEntry	1.3.6.1.4.1.9.9.815.1.42.1.4.1.1.1		not-accessible	The sourceId index must be a value must be a value from 0 up to the number of sources minus one.
I32 me1200SynceControlSourcesClockSourceSourceId	1.3.6.1.4.1.9.9.815.1.42.1.4.1.1.1.1	Integer32	not-accessible	-
ME1 me1200SynceControlSourcesClockSourceClearWtr	1.3.6.1.4.1.9.9.815.1.42.1.4.1.1.1.2	ME1200Unsigned8	read-write	-
me1200SynceNotificationPrefix	1.3.6.1.4.1.9.9.815.1.42.1.5
me1200SynceNotification	1.3.6.1.4.1.9.9.815.1.42.1.5.0
NTF me1200SynceNotificationClockSelectorStateChange	1.3.6.1.4.1.9.9.815.1.42.1.5.0.1			Notification is sent when the clock selector state is changed.
me1200SynceMibConformance	1.3.6.1.4.1.9.9.815.1.42.2
me1200SynceMibCompliances	1.3.6.1.4.1.9.9.815.1.42.2.1
me1200SynceMibCompliance	1.3.6.1.4.1.9.9.815.1.42.2.1.1			The compliance statement for the implementation.
me1200SynceMibGroups	1.3.6.1.4.1.9.9.815.1.42.2.2
me1200SynceCapabilitiesGlobalInfoGroup	1.3.6.1.4.1.9.9.815.1.42.2.2.1			A collection of objects suitable for bulk operations.
me1200SynceConfigGlobalClockSelectionModeInfoGroup	1.3.6.1.4.1.9.9.815.1.42.2.2.2			A collection of objects suitable for bulk operations.
me1200SynceConfigGlobalStationClocksInfoGroup	1.3.6.1.4.1.9.9.815.1.42.2.2.3			A collection of objects suitable for bulk operations.
me1200SynceConfigSourcesClockSourceNominationInfoGroup	1.3.6.1.4.1.9.9.815.1.42.2.2.4			A collection of objects suitable for bulk operations.
me1200SynceConfigPortsPortConfigInfoGroup	1.3.6.1.4.1.9.9.815.1.42.2.2.5			A collection of objects suitable for bulk operations.
me1200SynceStatusGlobalClockSelectionModeInfoGroup	1.3.6.1.4.1.9.9.815.1.42.2.2.6			A collection of objects suitable for bulk operations.
me1200SynceStatusSourcesClockSourceNominationInfoGroup	1.3.6.1.4.1.9.9.815.1.42.2.2.7			A collection of objects suitable for bulk operations.
me1200SynceStatusPortsPortStatusInfoGroup	1.3.6.1.4.1.9.9.815.1.42.2.2.8			A collection of objects suitable for bulk operations.
me1200SynceStatusPtpPortStatusInfoGroup	1.3.6.1.4.1.9.9.815.1.42.2.2.9			A collection of objects suitable for bulk operations.
me1200SynceControlSourcesClockSourceInfoGroup	1.3.6.1.4.1.9.9.815.1.42.2.2.10			A collection of objects suitable for bulk operations.
me1200SynceNotificationInfoGroup	1.3.6.1.4.1.9.9.815.1.42.2.2.11			A collection of objects suitable for bulk operations.

RFC description

Manages Synchronous Ethernet (SyncE) clock selection, frequency, and quality level on Cisco ME1200 switches.

Start monitoring Cisco ME1200 Metro Ethernet switch (Synchronous Ethernet clock selection) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ME1200-SYNCE-MIB

What Is ME1200-SYNCE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description