All MIBs › MADGEBOX-MIB
Category: FDDI and Token Ring, Technology: Token Ring
Description: Madge Networks MIB providing system and interface management objects for Madge Token Ring hubs and concentrators.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is MADGEBOX-MIB?
MADGEBOX-MIB is a vendor MIB from Madge Networks covering their Token Ring hub and concentrator product line ("Madgebox"), a family of Token Ring LAN infrastructure devices common in enterprise networks in the 1990s. It exposes system-level and per-interface (per Token Ring port) management objects for the chassis, letting management stations identify installed modules and track ring port state. As a hardware-monitoring MIB for LAN concentrators, it would typically be used to check overall device/system status, individual ring port up/down and insertion state, and error conditions such as ring beaconing or wiring faults on ports. It layers on top of the standard IETF Token Ring interface MIB and the generic interfaces MIB, since Madge hubs implemented both standard and proprietary Token Ring management objects. It was deployed in enterprise wiring closets running legacy Token Ring LANs, where administrators used SNMP to detect port faults and ring topology problems. Network engineers evaluating or troubleshooting this functionality can download the MADGEBOX-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in MADGEBOX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Madge Networks Token Ring hub/concentrator
Monitoring Examples
No object names were captured for this legacy module, so specific OIDs cannot be cited; based on the short description, an admin would typically poll per-port ring insertion/beacon state on the Madgebox concentrator to detect a station causing ring disruption.
What Can Be Monitored
- ring port insertion status
- port up/down state
- ring beaconing/fault conditions
- chassis module inventory
This MIB depends on
Related MIBs
Imported Objects
From RFC1155-SMI
| IpAddress | |
| OBJECT-TYPE | |
| enterprises |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| madge | 1.3.6.1.4.1.494 | |||
| madgeBox | 1.3.6.1.4.1.494.10 | |||
| madgeConfig | 1.3.6.1.4.1.494.10.1 | |||
| INT madgeConfigAdminStatus | 1.3.6.1.4.1.494.10.1.9 | INTEGER | read-write | The desired operating mode of the device. The mode can be changed by setting this object. If the device does not support the action it will return a bad value error. The behaviour of these states is device specific and some of the states may latch until the state is returned to normal. normal - standard operating mode / can be used to cancel a download or return the device from any latching state. reboot - force the device to reboot. The device will reboot into the version of flash identified by madgeConfigDefaultFlashVersion. identify - force the device to identify itself by flashing lights. This state may latch. test - force the device to do a self test. This state may latch. erase-config - erase all configuration info erase-flash - erase the version of microcode stored in the flash bank identifed by madgeConfigEraseFlashVersion. tftp-ip - force the device to start a TFTP download over IP tftp-ipx - force the device to start a TFTP download over IPX rpl-ipx - force the device to start a RPL download over IPX rpl-llc - force the device to start a RPL download over LLC halt - force the defice to shutdown ready for power off up-tftp-ip - force the device to start a TFTP upload over IP up-tftp-ipx - force the device to start a TFTP upload over IPX snapshot - force the device to take a snapshot of its current configuration |
| OCT madgeConfigBCodeVersion | 1.3.6.1.4.1.494.10.1.6 | OCTET STRING | read-only | Bootcode version of the device and the hardware version. Stored in the format :- High Byte - hardware version number - bootcode major version number - bootcode minor version number Low Byte - bootcode debug version number. |
| INT madgeConfigDefaultFlashVersion | 1.3.6.1.4.1.494.10.1.14 | INTEGER | read-write | The version index of the default flash bank that a device will reboot into when a standard reboot is performed. NOTE:This variable is only available on devices that support version 1.2 or greater of the Box MIB |
| INT madgeConfigDefaultSnapshot | 1.3.6.1.4.1.494.10.1.17 | INTEGER | read-write | This contains the version index of the snapshot that the device should take its configuration from on the next reboot. |
| INT madgeConfigDeviceHealth | 1.3.6.1.4.1.494.10.1.8 | INTEGER | read-only | Current health of the device Normal - everything is fine warning - something the user should be aware of degraded - the box is operating at reduced functionality critical - a major problem exists with the device. |
| INT madgeConfigEraseFlashVersion | 1.3.6.1.4.1.494.10.1.13 | INTEGER | read-write | A valid version index for the bank of flash or a software component to erase when AdminStatus is set to erase-flash. NOTE:This variable is only available on devices that support version 1.2 or greater of the Box MIB |
| IP madgeConfigIPAddress | 1.3.6.1.4.1.494.10.1.1 | IpAddress | read-write | The IP address of the device. |
| IP madgeConfigIPGateway | 1.3.6.1.4.1.494.10.1.2 | IpAddress | read-write | The default IP gateway for the device. |
| IP madgeConfigIPSubnetMask | 1.3.6.1.4.1.494.10.1.3 | IpAddress | read-write | The IP subnet mask of the device. |
| INT madgeConfigLinkTest | 1.3.6.1.4.1.494.10.1.11 | INTEGER | read-write | An object that can be written with any value to test whether a management station knows the correct device password |
| STR madgeConfigMCodeFilename | 1.3.6.1.4.1.494.10.1.7 | DisplayString | read-only | Original filename for the microcode that has been downloaded to the device. |
| OCT madgeConfigMCodeVersion | 1.3.6.1.4.1.494.10.1.5 | OCTET STRING | read-only | Microcode version of the device. Stored in the format :- first Byte - not used - microcode major version number - microcode minor version number last Byte - microcode debug version number. |
| INT madgeConfigOperStatus | 1.3.6.1.4.1.494.10.1.12 | INTEGER | read-only | The current operating mode of the device. normal - standard operating mode reboot - the device is rebooting identify - the device is identifying itself test - the device is performing a self-test downloading - the device is performing a download uploading - the device is performing an upload NOTE:This variable is only available on devices that support version 1.2 or greater of the Box MIB |
| STR madgeConfigPassword | 1.3.6.1.4.1.494.10.1.10 | DisplayString | read-write | The case insensitive password for the device. This password is used to authenticate all SNMP SET operations. Any GET operation on this object will return PUBLIC. If an attempt is made to set the password to a string greater than the maximum a BAD VALUE error will be returned |
| STR madgeConfigPasswordComment | 1.3.6.1.4.1.494.10.1.21.1.4 | DisplayString | read-write | A comment that can be used by the user to remember which passwords are which. |
| madgeConfigPasswordEntry | 1.3.6.1.4.1.494.10.1.21.1 | not-accessible | An entry containing a password for the device, or not, plus a comment to remind the user which entries are what. | |
| INT madgeConfigPasswordIndex | 1.3.6.1.4.1.494.10.1.21.1.1 | INTEGER | read-only | Index into the password table |
| STR madgeConfigPasswordRead | 1.3.6.1.4.1.494.10.1.21.1.2 | DisplayString | read-write | A case insensitive Read password for the device. Any GET operation on this object will return PUBLIC if this entry is used to store a password, and return a zero length string if no password is stored. If an attempt is made to set the password to a string greater than the maximum, a BAD VALUE error will be returned. If a SET is made with a zero length string, the Password is cleared. Note: for the special case of entry 1, the value is mirrored with madgeConfigReadPassword. |
| madgeConfigPasswordTable | 1.3.6.1.4.1.494.10.1.21 | not-accessible | A static table containing a list of passwords that can be used to manage the device. Reading this table is only sensible to see a description of each password and whether it's implemented. The first entry to this table mirrors the original madgeConfigPassword and madgeConfigReadPassword. This means that it will default to Public, and that it should never be a string of zero length. Trying to set as such will result in BAD VALUE. | |
| INT madgeConfigPasswordTableSize | 1.3.6.1.4.1.494.10.1.20 | INTEGER | read-only | The size of the password table in the device. This should be a static value. A value of zero indicates no table, and that only madgeConfigPassword can be used. This object must be supported if the password table is supported. |
| STR madgeConfigPasswordWrite | 1.3.6.1.4.1.494.10.1.21.1.3 | DisplayString | read-write | A case insensitive Write password for the device. Any GET operation on this object will return PUBLIC if this entry is used to store a password, and return a zero length string if no password is stored. If an attempt is made to set the password to a string greater than the maximum, a BAD VALUE error will be returned. If a SET is made with a zero length string, the Password is cleared. Note: for the special case of entry 1, the value is mirrored with madgeConfigPassword. |
| STR madgeConfigReadPassword | 1.3.6.1.4.1.494.10.1.15 | DisplayString | read-write | The case insensitive read password for the device. This password is used to authenticate all SNMP GET and GET-NEXT operations. Any GET operation on this object will return PUBLIC. If an attempt is made to set the password to a string greater than the maximum a BAD VALUE error will be returned |
| MAC madgeConfigSerialNumber | 1.3.6.1.4.1.494.10.1.4 | MacAddress | read-only | The burnt-in identifier of the device. This is a unique number and in most cases maps directly to the base MAC address of the device |
| STR madgeConfigSnapshotName | 1.3.6.1.4.1.494.10.1.16 | DisplayString | read-write | This specifies the name under which to store a snapshot of the current configuration. |
| madgeDownload | 1.3.6.1.4.1.494.10.3 | |||
| INT madgeDownloadDestination | 1.3.6.1.4.1.494.10.3.6 | INTEGER | read-write | The destination for the download. This will contain the madgeVersionIndex for the download destination. |
| INT madgeDownloadFailureCode | 1.3.6.1.4.1.494.10.3.8 | INTEGER | read-only | While a download is in progress this will always be 'no-error'. After a download is complete this indicates the success or failure of the download. If it is anything other than 'no-error' then 'madgedownloadStatusText' will contain a textual description of the error. Error codes from 100 upwards are errors returned from a TFTP server. Errors below this are locally generated. |
| STR madgeDownloadFileName | 1.3.6.1.4.1.494.10.3.5 | DisplayString | read-write | The filename of the microcode to download. The maximum length of this string is device specific. If a string that is too long is written to this variable BAD VALUE will be returned. |
| IP madgeDownloadIPAddress | 1.3.6.1.4.1.494.10.3.1 | IpAddress | read-write | The IP address of the server to use for the download when using TFTP-IP |
| IP madgeDownloadIPGateway | 1.3.6.1.4.1.494.10.3.2 | IpAddress | read-write | The IP gateway to be used to access the server. If this variable is zero then use the default gateway in madgeConfigIPGateway. |
| OCT madgeDownloadIPXAddress | 1.3.6.1.4.1.494.10.3.3 | OCTET STRING | read-write | The IPX address of the server to use for the download when using TFTP-IPX or RPL-IPX. The format of the address is = 12 bytes. |
| MAC madgeDownloadNodeAddress | 1.3.6.1.4.1.494.10.3.4 | MacAddress | read-write | The Node address of the server to use for the download when using RPL-LLC |
| INT madgeDownloadSize | 1.3.6.1.4.1.494.10.3.10 | INTEGER | read-only | While a download is in progress this indicates the number of bytes transferred so far. After the download is completed this remains at the final size downloaded. |
| INT madgeDownloadState | 1.3.6.1.4.1.494.10.3.7 | INTEGER | read-only | The current state of the download |
| STR madgeDownloadStatusText | 1.3.6.1.4.1.494.10.3.9 | DisplayString | read-only | A display string describing the status of the download in progress, or the reason for failure of the last download. If FailureCode = no-error then StatusText may be empty. |
| madgeIP | 1.3.6.1.4.1.494.10.4 | |||
| INT madgeIPBootpEnabled | 1.3.6.1.4.1.494.10.4.5 | INTEGER | read-write | Enable / Disable the use of BootP for IP address discovery |
| IP madgeIPCurrentAddress | 1.3.6.1.4.1.494.10.4.1 | IpAddress | read-only | The IP address that is currently being used by this device. The IP address could have been obtained from madgeConfigIPAddress or by some other means indicated by madgeIPDiscoveryMethod |
| IP madgeIPCurrentGateway | 1.3.6.1.4.1.494.10.4.2 | IpAddress | read-only | The IP gateway that is currently being used by this device. The IP gateway could have been obtained from madgeConfigIPGateway or by some other means indicated by madgeIPDiscoveryMethod |
| IP madgeIPCurrentSubnetMask | 1.3.6.1.4.1.494.10.4.3 | IpAddress | read-only | The IP Subnet Mask that is currently being used by this device. The IP Subnet Mask could have been obtained from madgeConfigIPSubnetMask or by some other means indicated by madgeIPDiscoveryMethod |
| INT madgeIPDHCPEnabled | 1.3.6.1.4.1.494.10.4.7 | INTEGER | read-write | Enable / Disable the use of DHCP for IP address discovery |
| INT madgeIPDiscoveryMethod | 1.3.6.1.4.1.494.10.4.4 | INTEGER | read-only | The source of the currently used IP address, gateway and subnet mask. |
| INT madgeIPRarpEnabled | 1.3.6.1.4.1.494.10.4.6 | INTEGER | read-write | Enable / Disable the use of RARP for IP address discovery |
| madgeSecure | 1.3.6.1.4.1.494.10.2 | |||
| OCT madgeSecureAllowedAddress | 1.3.6.1.4.1.494.10.2.6.1.3 | OCTET STRING | read-write | An address of a management station that is allowed to get / set MIB variables in this device. The format of the address is determined by the associated entry in the madgeSecureAllowedType. For type ipx-address the format is = 10 bytes. |
| INT madgeSecureAllowedEnabled | 1.3.6.1.4.1.494.10.2.4 | INTEGER | read-write | Enable / disable the allowed users feature. enabled - only management stations with an address in the AllowedTable will be allowed to get / set MIB variables in this device disabled - any management station is allowed to get / set MIB variables in this device |
| madgeSecureAllowedEntry | 1.3.6.1.4.1.494.10.2.6.1 | not-accessible | An entry containing an address for a manager that is allowed to get / set MIB variables in this device | |
| INT madgeSecureAllowedIndex | 1.3.6.1.4.1.494.10.2.6.1.1 | INTEGER | read-only | Index into the table |
| IP madgeSecureAllowedIPAddress | 1.3.6.1.4.1.494.10.2.6.1.4 | IpAddress | read-write | If madgeSecureAllowedType is set to ip-address, this variable is equivalent to madgeSecureAllowedAddress encoded as an IP Address, rather than an Octet String |
| madgeSecureAllowedTable | 1.3.6.1.4.1.494.10.2.6 | not-accessible | A table containing an address for all managers that are allowed to get / set MIB variables in this device | |
| INT madgeSecureAllowedTableSize | 1.3.6.1.4.1.494.10.2.5 | INTEGER | read-only | The size of the allowed users table in the device. A size of zero indicates that the table is not supported. |
| INT madgeSecureAllowedType | 1.3.6.1.4.1.494.10.2.6.1.2 | INTEGER | read-write | Identifies the format of the data stored in madgeSecureAllowedAddress not-used - this table entry does not contain valid data ip-address - this table entry contains a valid ip address ipx-address - this table entry contains a valid ipx address mac-address - this table entry contains a valid mac address |
| OCT madgeSecureCurrentAddress | 1.3.6.1.4.1.494.10.2.3.1.3 | OCTET STRING | read-only | An address of a management station that is currently communicating with this device. The format of the address is determined by the associated entry in the madgeSecureCurrentType. For type ipx-address the format is = 10 bytes. |
| madgeSecureCurrentEntry | 1.3.6.1.4.1.494.10.2.3.1 | not-accessible | A entry containing an address for a manager that is currently communicating with this device over SNMP. | |
| INT madgeSecureCurrentIndex | 1.3.6.1.4.1.494.10.2.3.1.1 | INTEGER | read-only | Index into the table |
| IP madgeSecureCurrentIPAddress | 1.3.6.1.4.1.494.10.2.3.1.5 | IpAddress | read-only | If madgeSecureCurrentType is set to ip-address, this variable returns the madgeSecureCurrentAddress encoded as an IP Address, rather than an Octet String |
| madgeSecureCurrentTable | 1.3.6.1.4.1.494.10.2.3 | not-accessible | A table containing an address for all managers that are currently communicating with this device over SNMP. | |
| INT madgeSecureCurrentTableSize | 1.3.6.1.4.1.494.10.2.1 | INTEGER | read-only | The size of the current users table in the device. A size of zero indicates that the table is not supported. |
| INT madgeSecureCurrentTimeout | 1.3.6.1.4.1.494.10.2.2 | INTEGER | read-write | A time in seconds used to specify how long a management station will remain registered in the Current Users table if no requests are received from that management station. After this time the management station will be automatically removed from the table. Devices are not required to support the writable functionality for this variable. |
| INT madgeSecureCurrentType | 1.3.6.1.4.1.494.10.2.3.1.2 | INTEGER | read-only | Identifies the format of the data stored in madgeSecureCurrentAddress not-used - this table entry does not contain valid data ip-address - this table entry contains a valid ip address ipx-address - this table entry contains a valid ipx address mac-address - this table entry contains a valid mac address |
| INT madgeSecureCurrentUpdateTime | 1.3.6.1.4.1.494.10.2.3.1.4 | INTEGER | read-only | The time in seconds since the management station identified by this table entry last accessed this device. The table entry will be removed by the device once this UpdateTime reaches the value specified in madgeSecureCurrentTimeout |
| OCT madgeSecureTrapDestAddress | 1.3.6.1.4.1.494.10.2.9.1.3 | OCTET STRING | read-write | An address for a management station that is to receive any SNMP traps generated by this device. The format of the address is determined by the associated entry in the madgeSecureTrapDestType. For type ipx-address the format is = 10 bytes. |
| INT madgeSecureTrapDestEnabled | 1.3.6.1.4.1.494.10.2.7 | INTEGER | read-write | Enable / disable the trap destination feature. enabled - any SNMP traps generated by this device will only be sent to management stations with an address in the madgeSecureTrapDestTable disabled - any SNMP traps generated by this device will be sent to all management stations currently known by this device. |
| madgeSecureTrapDestEntry | 1.3.6.1.4.1.494.10.2.9.1 | not-accessible | An entry containing the address for a manager that is to receive SNMP traps generated by this device | |
| INT madgeSecureTrapDestIndex | 1.3.6.1.4.1.494.10.2.9.1.1 | INTEGER | read-only | Index into the table |
| IP madgeSecureTrapDestIPAddress | 1.3.6.1.4.1.494.10.2.9.1.4 | IpAddress | read-write | If madgeSecureTrapDestType is set to ip-address, this variable is equivalent to madgeSecureTrapDestAddress encoded as an IP Address, rather than an Octet String |
| madgeSecureTrapDestTable | 1.3.6.1.4.1.494.10.2.9 | not-accessible | A table containing the address for all managers that are to receive SNMP traps generated by this device | |
| INT madgeSecureTrapDestTableSize | 1.3.6.1.4.1.494.10.2.8 | INTEGER | read-only | The size of the trap destinations table in the device. A size of zero indicates that this table is not supported. |
| INT madgeSecureTrapDestType | 1.3.6.1.4.1.494.10.2.9.1.2 | INTEGER | read-write | Identifies the format of the data stored in madgeSecureTrapDestAddress not-used - this table entry does not contain valid data ip-address - this table entry contains a valid ip address ipx-address - this table entry contains a valid ipx address mac-address - this table entry contains a valid mac address |
| madgeTrap | 1.3.6.1.4.1.494.10.6 | |||
| INT madgeTrapCounter | 1.3.6.1.4.1.494.10.6.1.1.8 | INTEGER | read-only | A count of the number of times this trap has been generated since the device was started, or since madgeTrapResetCounters was set to reset. |
| INT madgeTrapDefaultAll | 1.3.6.1.4.1.494.10.6.4 | INTEGER | read-write | To return all of the entries in the madgeTrap table to their default enable state set this variable to reset. During the reset the device will return 'resetting' in response to a GET request. When the reset is complete the device will return normal in response to a GET request. |
| STR madgeTrapDescription | 1.3.6.1.4.1.494.10.6.1.1.2 | DisplayString | read-only | A string containing a textual description for the trap identified by this entry. |
| INT madgeTrapEnable | 1.3.6.1.4.1.494.10.6.1.1.6 | INTEGER | read-write | The enable state of this particular trap. |
| INT madgeTrapEnableAll | 1.3.6.1.4.1.494.10.6.2 | INTEGER | read-write | Enable / disable the generation of all traps by the device. When set to disabled - no traps are generated. When set to enabled - only traps with madgeTrapEnable = enabled are generated. |
| INT madgeTrapEnableDefault | 1.3.6.1.4.1.494.10.6.1.1.7 | INTEGER | read-only | The default enable state for this particular trap When the device is reset or madgeTrapDefaultAll is set to reset. |
| OID madgeTrapEnterprise | 1.3.6.1.4.1.494.10.6.1.1.3 | OBJECT IDENTIFIER | read-only | The enterprise identifier for the type of object generating the trap. |
| madgeTrapEntry | 1.3.6.1.4.1.494.10.6.1.1 | not-accessible | An entry containing information about a single trap. | |
| INT madgeTrapIndex | 1.3.6.1.4.1.494.10.6.1.1.1 | INTEGER | not-accessible | Index into the table |
| STR madgeTrapMessage | 1.3.6.1.4.1.494.10.6.5 | DisplayString | read-only | A textual description for the current trap. This variable can be included in an SNMP TRAP to provide a complete reason for the TRAP. |
| INT madgeTrapResetCounters | 1.3.6.1.4.1.494.10.6.3 | INTEGER | read-write | To reset all of the counters in the madgeTrap table set this variable to reset. During the reset the device will return 'resetting' in response to a GET request. When the reset is complete the device will return normal in response to a GET request. |
| INT madgeTrapSeverity | 1.3.6.1.4.1.494.10.6.1.1.5 | INTEGER | read-only | The severity of this particular trap |
| INT madgeTrapSpecificTrap | 1.3.6.1.4.1.494.10.6.1.1.4 | INTEGER | read-only | Trap specific code to identify this trap. |
| madgeTrapTable | 1.3.6.1.4.1.494.10.6.1 | not-accessible | A table containing information about all of the traps that can be generated by a device. Each trap can be enabled / disabled, and a count is kept to indicate the number of traps generated. | |
| madgeUpload | 1.3.6.1.4.1.494.10.7 | |||
| INT madgeUploadFailureCode | 1.3.6.1.4.1.494.10.7.7 | INTEGER | read-only | While an upload is in progress this will always be 'no-error'. After an upload is complete this indicates the success or failure of the upload. If it is anything other than 'no-error' then 'madgeUploadStatusText' will contain a textual description of the error. Error codes from 100 upwards are errors returned from a TFTP server. Errors below this are locally generated. |
| STR madgeUploadFileName | 1.3.6.1.4.1.494.10.7.4 | DisplayString | read-write | The filename under which to store the uploaded microcode. The maximum length of this string is device specific. If a string that is too long is written to this variable BAD VALUE will be returned. |
| IP madgeUploadIPAddress | 1.3.6.1.4.1.494.10.7.1 | IpAddress | read-write | The IP address of the server to use for the upload when using TFTP-IP |
| IP madgeUploadIPGateway | 1.3.6.1.4.1.494.10.7.2 | IpAddress | read-write | The IP gateway to be used to access the server. If this variable is zero then use the default gateway in madgeConfigIPGateway. |
| OCT madgeUploadIPXAddress | 1.3.6.1.4.1.494.10.7.3 | OCTET STRING | read-write | The IPX address of the server to use for the upload when using TFTP-IPX. The format of the address is = 12 bytes. |
| INT madgeUploadSize | 1.3.6.1.4.1.494.10.7.9 | INTEGER | read-only | While an upload is in progress this indicates the number of bytes transferred so far. After the upload is completed this remains at the final size uploaded. |
| INT madgeUploadSource | 1.3.6.1.4.1.494.10.7.5 | INTEGER | read-write | The source for the upload. This will contain the madgeVersionIndex for the upload source. |
| INT madgeUploadState | 1.3.6.1.4.1.494.10.7.6 | INTEGER | read-only | The current state of the Upload |
| STR madgeUploadStatusText | 1.3.6.1.4.1.494.10.7.8 | DisplayString | read-only | A display string describing the status of the upload in progress, or the reason for failure of the last upload. If FailureCode = no-error then StatusText may be empty. |
| madgeVersion | 1.3.6.1.4.1.494.10.5 | |||
| INT madgeVersionCount | 1.3.6.1.4.1.494.10.5.2 | INTEGER | read-only | The number of entries in the version table |
| STR madgeVersionDescription | 1.3.6.1.4.1.494.10.5.1.1.2 | DisplayString | read-only | A string containing a textual description for the component identified by this entry. |
| madgeVersionEntry | 1.3.6.1.4.1.494.10.5.1.1 | not-accessible | An entry containing version information for a hardware / software component in a device. | |
| INT madgeVersionIndex | 1.3.6.1.4.1.494.10.5.1.1.1 | INTEGER | not-accessible | Index into the table |
| STR madgeVersionLocation | 1.3.6.1.4.1.494.10.5.1.1.3 | DisplayString | read-only | A string containing a textual description of the location of the component identified by this entry. eg Flash Bank A Flash ROM Boot ROM Boot Bank A Base Hardware Hardware Module |
| OCT madgeVersionNumber | 1.3.6.1.4.1.494.10.5.1.1.4 | OCTET STRING | read-only | Version number for the component. Stored in the format :- first Byte - major version number - minor version number last Byte - debug version number. |
| madgeVersionTable | 1.3.6.1.4.1.494.10.5.1 | not-accessible | A table containing version information for all hardware / software components in a device. | |
| INT madgeVersionType | 1.3.6.1.4.1.494.10.5.1.1.5 | INTEGER | read-only | The type of object that this table entry contains version information for. flash : code image resident in flash OR the flash bank itself boot-fixed : the version of the fixed boot ROM. boot-updateable : the current version of boot ROM code where the code can be updated. hardware-fixed : Hardware that cannot be upgraded. hardware-upgradeable : a plug in card that can be changed. sw-running : code image that is currently running in RAM. sw-config : a configuration file. This item may be uploaded or downloaded, to configure the device. sw-image : a subcomponent of the entire software. Can be resident in flash or ram. These items should be placed in the version table following the version of which they are a subcomponent. |
RFC description
Manages common Madge networking device objects including configuration, security, downloads, IP settings, firmware versions, and upload/download operations.
Start monitoring Madge Networks Token Ring hub/concentrator with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.