All MIBs › LUM-EQUIPMENT-MIB › equipmentNodeIcnRedundancyMode
equipmentNodeIcnRedundancyMode
Module: LUM-EQUIPMENT-MIB
OID (symbolic): LUM-EQUIPMENT-MIB::equipmentNodeIcnRedundancyMode
OID (numeric): 1.3.6.1.4.1.8708.2.11.2.7.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates whether the internal communication network between sub-racks, ICN3 and ICN4, can be connected in a redundant manner or not.
disabled - Non-redundant ICN connection. Both ICN ports are enable for forwarding. Note: Connecting both ICN ports to the same internal switch will cause a loop.
ring - Redundant ICN connection. Only one ICN port at a time is enabled for forwarding even if both are physically connected and both links are up. Note: The port that is first connected will be used for forwarding and if disconnected, the other port will be enabled automatically.
disabled - Non-redundant connection.
ring - Redundantly connected in a ring.
What is equipmentNodeIcnRedundancyMode?
Controls whether the inter-subrack internal communication network (ICN) ports are connected redundantly: disabled means both ICN ports forward simultaneously (and must not be wired into the same switch, or a loop results), while ring means only one port forwards at a time, automatically failing over if it's disconnected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8708.2.11.2.7.2 snmpwalk -v2c -c public <target> LUM-EQUIPMENT-MIB::equipmentNodeIcnRedundancyMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8708.2.11.2.7.2.1 snmpget -v2c -c public <target> LUM-EQUIPMENT-MIB::equipmentNodeIcnRedundancyMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8708.2.11.2.7.2.1 i <value>
Start monitoring Infinera optical transport network element / chassis (equipment inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LUM-EQUIPMENT-MIB::equipmentNodeIcnRedundancyMode OID value, configure state conditions and alerts, and monitor any Infinera optical transport network element / chassis (equipment inventory) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8708 | lumentis | LUM-REG |
| 1.3.6.1.4.1.8708.2 | lumGeneric | LUM-REG |
| 1.3.6.1.4.1.8708.2.11 | lumEquipmentMIB | LUM-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8708.2.11.2 | lumEquipmentMIBObjects | LUM-EQUIPMENT-MIB |
| 1.3.6.1.4.1.8708.2.11.2.7 | equipmentNode | LUM-EQUIPMENT-MIB |
| 1.3.6.1.4.1.8708.2.11.2.7.2 | equipmentNodeIcnRedundancyMode | LUM-EQUIPMENT-MIB |