All MIBs › LBHUB-FMS-MIB › pollProtocol
pollProtocol
Module: LBHUB-FMS-MIB
OID (symbolic): LBHUB-FMS-MIB::pollProtocol
OID (numeric): 1.3.6.1.4.1.43.10.20.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This defines the protocol to use with which to monitor the device.
Writing an address to the pollAddress field causes a default pollProtocol value to be setup. The default value is derived from the format of the address - four bytes means ip(2), and 10 bytes means ipx(3) addresses.
If the requested protocol is not supported or is not compatible with the pollAddress, then an error is returned when an attempt is made to set the RowStatus to active or notInService.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.10.20.1.1.3 snmpwalk -v2c -c public <target> LBHUB-FMS-MIB::pollProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.10.20.1.1.3.1 snmpget -v2c -c public <target> LBHUB-FMS-MIB::pollProtocol.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.10.20.1.1.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.10 | generic | A3Com-products-MIB |
| 1.3.6.1.4.1.43.10.20 | poll | A3COM0004-GENERIC |
| 1.3.6.1.4.1.43.10.20.1 | pollTable | LBHUB-BOOM-MIB |
| 1.3.6.1.4.1.43.10.20.1.1 | pollTableEntry | LBHUB-BOOM-MIB |
| 1.3.6.1.4.1.43.10.20.1.1.3 | pollProtocol | LBHUB-FMS-MIB |