All MIBs › KVMS3-TRAP-MIB
Category: Alarm and Event Management
Description: MIB defining SNMP trap notifications for KVM switch events including user sessions, power, and connectivity status changes.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is KVMS3-TRAP-MIB?
KVMS3-TRAP-MIB is a vendor MIB (branded under the 'fsc' Fujitsu Siemens Computers prefix, built on an Avocent OID subtree) defining SNMP trap notifications for a KVM-over-IP switch, the KVM S3 series. It exposes trap payload objects covering user session activity, firmware image upgrade progress, and cascade-switch/server topology changes rather than a large table of polled counters. It is explicitly useful for monitoring software status such as firmware upgrade version and result, and connectivity/topology status such as which cascade switch or target server a session is attached to. It has a notable dependency on the Avocent enterprise OID structure (avocent, ds, dsManagement), reflecting that the KVM S3 hardware is Avocent-based technology rebranded by Fujitsu Siemens. It is deployed in data center environments where KVM-over-IP switches provide remote console access to racks of servers. Engineers can download the KVMS3-TRAP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in KVMS3-TRAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Fujitsu Siemens/Avocent KVM-over-IP switch (KVM S3 series)
Monitoring Examples
fscKvmS3TrapObjectImageCurrentVersion, fscKvmS3TrapObjectImageNewVersion, and fscKvmS3TrapObjectImageUpgradeResults are carried together in a firmware-upgrade trap so an admin is notified when a KVM switch completes or fails an upgrade. fscKvmS3TrapObjectSessionIdentifier and fscKvmS3TrapObjectUserName identify who opened or closed a KVM session, while fscKvmS3TrapObjectCascadeSwitchName/fscKvmS3TrapObjectOldCascadeSwitchName flag when a cascaded switch is added, removed, or renamed within the KVM chain.
What Can Be Monitored
- user session start/end
- firmware upgrade status and version
- cascade switch topology changes
- server connection/rename events
- target server identity
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| NetworkAddress | |
| TimeTicks | |
| enterprises |
From RFC1213-MIB
| DisplayString | |
| PhysAddress |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| avocent | 1.3.6.1.4.1.10418 | |||
| ds | 1.3.6.1.4.1.10418.3 | |||
| fscKvmS3Products | 1.3.6.1.4.1.10418.3.1 | |||
| NTF fscKvmS3RebootStartedTrap | 1.3.6.1.4.1.10418.3.1.0.1 | The appliance is in the process of rebooting. The name of the user who initiated the reboot is contained in fscKvmS3TrapObjectUserName. | ||
| NTF fscKvmS3UserLoginTrap | 1.3.6.1.4.1.10418.3.1.0.2 | A user logged into the appliance. The name of the user who logged in is contained in fscKvmS3TrapObjectUserName. | ||
| NTF fscKvmS3UserLogoutTrap | 1.3.6.1.4.1.10418.3.1.0.3 | A user logged out of the appliance. The name of the user who logged out is contained in fscKvmS3TrapObjectUserName. | ||
| NTF fscKvmS3VideoSessionStartedTrap | 1.3.6.1.4.1.10418.3.1.0.4 | A video session has started. The name of the user who is connected to the session is contained in fscKvmS3TrapObjectUserName. The session identifier is contained in fscKvmS3TrapObjectSessionIdentifier. | ||
| NTF fscKvmS3VideoSessionStoppedTrap | 1.3.6.1.4.1.10418.3.1.0.5 | A video session has stoppped. The name of the user who was connected to the session is contained in fscKvmS3TrapObjectUserName. The session identifier is contained in fscKvmS3TrapObjectSessionIdentifier. | ||
| NTF fscKvmS3VideoSessionTerminatedTrap | 1.3.6.1.4.1.10418.3.1.0.6 | A video session has been terminated by another user. The name of the user who terminated the session is contained in fscKvmS3TrapObjectUserName. The name of the user who was terminated from the session is contained in fscKvmS3TrapObjectTargetUserName. The session identifier is contained in fscKvmS3TrapObjectSessionIdentifier. | ||
| NTF fscKvmS3LocalPortViewingStartedTrap | 1.3.6.1.4.1.10418.3.1.0.7 | A user on the local port has started viewing a server. The session identifier is contained in fscKvmS3TrapObjectSessionIdentifier. | ||
| NTF fscKvmS3LocalPortViewingStoppedTrap | 1.3.6.1.4.1.10418.3.1.0.8 | A user on the local port has stopped viewing a server. The session identifier is contained in fscKvmS3TrapObjectSessionIdentifier. | ||
| NTF fscKvmS3ImageUpgradeStarted | 1.3.6.1.4.1.10418.3.1.0.9 | The appliance has started a TFTP or ASMP upgrade of an image. The name of the user who initiated the TFTP or ASMP image upgrade is contained in fscKvmS3TrapObjectUserName. The type of image that is being upgraded is contained in fscKvmS3TrapObjectImageType. The version of the image that the appliance is upgrading to is contained in fscKvmS3TrapObjectImageNewVersion. The version of the image that the appliance is currently running is contained in fscKvmS3TrapObjectImageCurrentVersion. | ||
| NTF fscKvmS3ImageUpgradeResultsTrap | 1.3.6.1.4.1.10418.3.1.0.10 | The results of a TFTP or ASMP image upgrade. | ||
| NTF fscKvmS3UserAddedTrap | 1.3.6.1.4.1.10418.3.1.0.11 | A new user has been added to the local user database. The name of the user who added the new user is contained in fscKvmS3TrapObjectUserName. The name of the new user is contained in fscKvmS3TrapObjectTargetUserName. | ||
| NTF fscKvmS3UserDeletedTrap | 1.3.6.1.4.1.10418.3.1.0.12 | A user has been deleted from the local user database. The name of the user who deleted the user is contained in fscKvmS3TrapObjectUserName. The name of the user who was deleted is contained in fscKvmS3TrapObjectTargetUserName. | ||
| NTF fscKvmS3UserModifiedTrap | 1.3.6.1.4.1.10418.3.1.0.13 | A user was modified. The name of the user who modified the user is contain in fscKvmS3TrapObjectUserName. The name of the user who was modified is contained in fscKvmS3TrapObjectTargetUserName. | ||
| NTF fscKvmS3UserAuthenticationFailureTrap | 1.3.6.1.4.1.10418.3.1.0.14 | A user failed to authenticate with the appliance. The name of the user who failed to authenticate is contained in fscKvmS3TrapObjectUserName. | ||
| NTF fscKvmS3KvmIaAddedTrap | 1.3.6.1.4.1.10418.3.1.0.15 | An KVM-IA was added. The ID of the KVM-IA which was added is contained in fscKvmS3TrapObjectKvmIaId. | ||
| NTF fscKvmS3KvmIaRemovedTrap | 1.3.6.1.4.1.10418.3.1.0.16 | A KVM-IA was removed. The ID of the KVM-IA which was removed is contained in fscKvmS3TrapObjectKvmIaId. | ||
| NTF fscKvmS3ServerNameChangedTrap | 1.3.6.1.4.1.10418.3.1.0.17 | The name of a server has changed. The previous name of the server is contained in fscKvmS3TrapObjectOldServerName. The new name of the server is contained in fscKvmS3TrapObjectServerName. The ID of the KVM-IA the server is attached to is contained in fscKvmS3TrapObjectKvmIaId. | ||
| NTF fscKvmS3CascadeSwitchAddedTrap | 1.3.6.1.4.1.10418.3.1.0.18 | A cascade switch was added. The name of the switch which was added is contained in fscKvmS3TrapObjectCascadeSwitchName. The ID of the KVM-IA the switch was added to is contained in fscKvmS3TrapObjectKvmIaId. | ||
| NTF fscKvmS3CascadeSwitchRemovedTrap | 1.3.6.1.4.1.10418.3.1.0.19 | A cascade switch was removed. The name of the switch which was removed is contained in fscKvmS3TrapObjectCascadeSwitchName. The ID of the KVM-IA the switch was attached to is contained in fscKvmS3TrapObjectKvmIaId. | ||
| NTF fscKvmS3CascadeSwitchNameChangedTrap | 1.3.6.1.4.1.10418.3.1.0.20 | The name of a cascade switch has changed. The previous name of the cascade switch is contained in fscKvmS3TrapObjectOldCascadeSwitchName. The new name of the cascade switch is contained in fscKvmS3TrapObjectCascadeSwitchName. The ID of the KVM-IA the switch is attached to is contained in fscKvmS3TrapObjectKvmIaId. | ||
| NTF fscKvmS3ConfigurationFileLoadedTrap | 1.3.6.1.4.1.10418.3.1.0.21 | The appliance has loaded a configuration file. The name of the user who commanded the appliance to load the configuration file is contained in fscKvmS3TrapObjectUserName. The name of the file that was loaded is contained in fscKvmS3TrapObjectFileName. | ||
| NTF fscKvmS3UserDatabaseFileLoadedTrap | 1.3.6.1.4.1.10418.3.1.0.22 | The appliance has loaded a user database file. The name of the user who commanded the appliance to load the user database file is contained in fscKvmS3TrapObjectUserName. The name of the file that was loaded is contained in fscKvmS3TrapObjectFileName. | ||
| NTF fscKvmS3InvalidHookupDetectedTrap | 1.3.6.1.4.1.10418.3.1.0.23 | The appliance has detected an invalid connection. This can include two KVM-IA devices on a port where one or more have a legacy KVM Switch, or some other illegal setup condition. Information about the nature of the failure is stored in the fscKvmS3TrapObjectFirmwareCondition object. Note: this trap is deprecated and will not longer be sent. | ||
| NTF fscKvmS3SubsystemUpgradeStartedTrap | 1.3.6.1.4.1.10418.3.1.0.24 | The appliance has started a Subsystem Upgrade. This can be a download from the DModule to the Main Board, or a KVM-IA or other subsystem download from the Main Board... Information about the subsystem being updated is stored in the fscKvmS3TrapObjectFirmwareCondition object. Note: this trap is deprecated and will not longer be sent. | ||
| NTF fscKvmS3SubsystemRestartTrap | 1.3.6.1.4.1.10418.3.1.0.25 | The appliance has completed a download and is restarting the subsystem specified in the fscKvmS3TrapObjectFirmwareCondition object. Note: this trap is deprecated and will not longer be sent. | ||
| NTF fscKvmS3FirmwareCommunicationsTrap | 1.3.6.1.4.1.10418.3.1.0.26 | The appliance has detected communication problems in the system configuration. This can be used to indicate install problems that might result in percieved problems with the switch. | ||
| NTF fscKvmS3NVMemoryFailureTrap | 1.3.6.1.4.1.10418.3.1.0.27 | The Appliance has detected a memory problem, the nature of which has been described in the fscKvmS3TrapObjectFirmwareCondition object. | ||
| NTF fscKvmS3WatchdogResetTrap | 1.3.6.1.4.1.10418.3.1.0.28 | The appliance has detected a watchdog reset condition. This indicates a catastrophic failure in the Firmware/Hardware preventing normal operation of the appliance. | ||
| NTF fscKvmS3DiagnosticConditionTrap | 1.3.6.1.4.1.10418.3.1.0.29 | The Appliance has detected a special condition to be trapped for diagnostics. The condition has been recorded is stored in the fscKvmS3TrapObjectFirmwareCondition object. | ||
| NTF fscKvmS3SubsystemUpgradeFailureTrap | 1.3.6.1.4.1.10418.3.1.0.30 | The Appliance has detected a special condition resulting in a failed subsystem update. The condition has been recorded is stored in the fscKvmS3TrapObjectFirmwareCondition object. Note: this trap is deprecated and will not longer be sent. | ||
| NTF fscKvmS3WarningConditionTrap | 1.3.6.1.4.1.10418.3.1.0.31 | The Appliance has detected a special condition to be trapped for warning the operator. The condition indicates some parameter outside of normal operation, such as over temperature range. These are not expected to result in unusual behavior, but may be precursor to a subsequent urgent condition. | ||
| NTF fscKvmS3UrgentConditionTrap | 1.3.6.1.4.1.10418.3.1.0.32 | The Appliance has detected a special condition to be trapped for alerting the operator. The condition indicates some parameter outside of normal operation that is expected to result in unpredictable system behavior. | ||
| NTF fscKvmS3UserLockedTrap | 1.3.6.1.4.1.10418.3.1.0.33 | A user account has been locked. The IP address of the client is contained in fscKvmS3TrapObjectIPAddress. The name of the user who was locked is contained in fscKvmS3TrapObjectTargetUserName. The reason for which the user account has been locked is contained in fscKvmS3TrapObjectLockReason. | ||
| NTF fscKvmS3UserUnlockedTrap | 1.3.6.1.4.1.10418.3.1.0.34 | A user account has been unlocked. The IP address of the client that originated the unlock request is contained in fscKvmS3TrapObjectIPAddress. When the user account is unlocked by an appliance reboot or by the expiration of the lockout period (as specified in the fscKvmS3TrapObjectUnlockReason object), the IP address will be blank. The name of the user who unlocked the user is contained in fscKvmS3TrapObjectUserName. When the user account is unlocked by an appliance reboot or by the expiration of the lockout period (as specified in the fscKvmS3TrapObjectUnlockReason object), the name of the user will be blank. The name of the user who was unlocked is contained in fscKvmS3TrapObjectTargetUserName. The reason for which the user account has been unlocked is contained in fscKvmS3TrapObjectUnlockReason. | ||
| NTF fscKvmS3KvmIaImageUpgradeStarted | 1.3.6.1.4.1.10418.3.1.0.35 | A software image upgrade has started on an KVM-IA. The name of the user who initiated the KVM-IA upgrade is contained in fscKvmS3TrapObjectUserName. The type of software image being upgraded is contained in fscKvmS3TrapObjectTypeOfImage. The software image version the KVM-IA is upgrading to is contained in fscKvmS3TrapObjectImageNewVersion. The software image version the KVM-IA is currently running is contained in fscKvmS3TrapObjectImageCurrentVersion. The name of the server connected to the KVM-IA being upgraded is contained in fscKvmS3TrapObjectServerName. The ID of the KVM-IA being upgraded is contained in fscKvmS3TrapObjectKvmIaId | ||
| NTF fscKvmS3KvmIaImageUpgradeResultTrap | 1.3.6.1.4.1.10418.3.1.0.36 | The result of an KVM-IA software image upgrade. The image upgrade result is contained in fscKvmS3TrapObjectKVM-IAImageUpgradeResult. The name of the user who initiated the KVM-IA upgrade is contained in fscKvmS3TrapObjectUserName. The type of software image the upgrade result is for is contained in fscKvmS3TrapObjectTypeOfImage. The software image version the KVM-IA attempted to upgrade to is contained in fscKvmS3TrapObjectImageNewVersion. The software image version the KVM-IA is running is contained in fscKvmS3TrapObjectImageCurrentVersion. If the software image upgrade was successful then this version will match the version reported in fscKvmS3TrapObjectImageNewVersion. The name of the server connected to the KVM-IA is contained in fscKvmS3TrapObjectServerName. The ID of the KVM-IA the result is for is contained in fscKvmS3TrapObjectKvmIaId. | ||
| NTF fscKvmS3KvmIaRestartedTrap | 1.3.6.1.4.1.10418.3.1.0.37 | An KVM-IA has restarted. An KVM-IA will restart after an KVM-IA image upgrade completes. The name of the server connected to the KVM-IA is contained in fscKvmS3TrapObjectServerName. The ID of the KVM-IA that restarted is for is contained in fscKvmS3TrapObjectKvmIaId. | ||
| NTF fscKvmS3VirtualMediaSessionStartedTrap | 1.3.6.1.4.1.10418.3.1.0.38 | A remote Virtual Media session to a server has started. A video session to the server must have been established by the same user prior to starting the VM session. The name of the user who connected to the VM session is contained in fscKvmS3TrapObjectUserName. The name of the server the user connected to is contained in fscKvmS3TrapObjectServerName. The ID of the KVM-IA the video session is using is contained in fscKvmS3TrapObjectKvmIaId. | ||
| NTF fscKvmS3VirtualMediaSessionStoppedTrap | 1.3.6.1.4.1.10418.3.1.0.39 | A remote virtual media session to a server has stopped. The name of the user who was connected to the VM session is contained in fscKvmS3TrapObjectUserName. The name of the server the user was connected to is contained in fscKvmS3TrapObjectServerName. | ||
| NTF fscKvmS3VirtualMediaSessionTerminatedTrap | 1.3.6.1.4.1.10418.3.1.0.40 | A remote virtual media session has been terminated or preempted by another user. The name of the user who terminated or preempted the VM session is contained in fscKvmS3TrapObjectUserName if available. An empty string is reported if a user name is not available. A user name will not be available if the remote session was terminated or preempted from the OSCAR interface and OSCAR authentication is disabled. The name of the user who was terminated or preempted from the VM session is contained in fscKvmS3TrapObjectTargetUserName. The name of the server the user was connected to contained in fscKvmS3TrapObjectServerName. | ||
| NTF fscKvmS3VirtualMediaSessionReservedTrap | 1.3.6.1.4.1.10418.3.1.0.41 | A user established a reserved remote virtual media session. The name of the user who has established a reserved virtual media session is contained in fscKvmS3TrapObjectUserName. The name of the server the user was connected to is contained in fscKvmS3TrapObjectServerName. | ||
| NTF fscKvmS3VirtualMediaSessionUnreservedTrap | 1.3.6.1.4.1.10418.3.1.0.42 | A user established a non-reserved remote virtual media session. The name of the user who has established a non-reserved virtual media session is contained in fscKvmS3TrapObjectUserName. The name of the server the user was connected to is contained in fscKvmS3TrapObjectServerName. | ||
| NTF fscKvmS3VirtualMediaDriveMapped | 1.3.6.1.4.1.10418.3.1.0.43 | A remote virtual media drive has been mapped. The name of the user who has established the virtual media session is contained in fscKvmS3TrapObjectUserName. The name of the server the user was connected to is contained in fscKvmS3TrapObjectServerName. The type of drive that has been mapped is contained in fscKvmS3TrapObjectVirtualMediaDriveType. The access mode for the drive that has been mapped is contained in fscKvmS3TrapObjectVirtualMediaDriveAccessMode. | ||
| NTF fscKvmS3VirtualMediaDriveUnmapped | 1.3.6.1.4.1.10418.3.1.0.44 | A remote virtual media drive has been unmapped. The name of the user who has established the virtual media session is contained in fscKvmS3TrapObjectUserName. The name of the server the user was connected to is contained in fscKvmS3TrapObjectServerName. The type of drive that has been unmapped is contained in fscKvmS3TrapObjectVirtualMediaDriveType. The access mode for the drive that has been unmapped is contained in fscKvmS3TrapObjectVirtualMediaDriveAccessMode. | ||
| NTF fscKvmS3LocalPortVirtualMediaStartedTrap | 1.3.6.1.4.1.10418.3.1.0.45 | A user on the local port has started a virtual media session to a server. The session identifier is contained in fscKvmS3TrapObjectSessionIdentifier. | ||
| NTF fscKvmS3LocalPortVirtualMediaStoppedTrap | 1.3.6.1.4.1.10418.3.1.0.46 | A user on the local port has stopped a virtual media session to a server. The session identifier is contained in fscKvmS3TrapObjectSessionIdentifier. | ||
| NTF fscKvmS3LocalPortVirtualMediaSessionTerminatedTrap | 1.3.6.1.4.1.10418.3.1.0.47 | A local user virtual media session has been terminated or preempted by another user. The name of the user who terminated or preempted the VM session is contained in fscKvmS3TrapObjectUserName if available. An empty string is reported if a user name is not available. A user name will not be available if the remote session was terminated or preempted from the OSCAR interface and OSCAR authentication is disabled. The name of the server the local user was connected to contained in fscKvmS3TrapObjectServerName. | ||
| NTF fscKvmS3LocalPortVirtualMediaSessionReservedTrap | 1.3.6.1.4.1.10418.3.1.0.48 | A local user has reserved a local virtual media session. The name of the server the user was connected to is contained in fscKvmS3TrapObjectServerName. | ||
| NTF fscKvmS3LocalPortVirtualMediaSessionUnreservedTrap | 1.3.6.1.4.1.10418.3.1.0.49 | A local user has unreserved a local virtual media session. The name of the server the user was connected to is contained in fscKvmS3TrapObjectServerName. | ||
| NTF fscKvmS3LocalPortVideoSessionTerminatedTrap | 1.3.6.1.4.1.10418.3.1.0.50 | A local user video session has been terminated by another user. The name of the user who terminated the session is contained in fscKvmS3TrapObjectUserName. The session identifier is contained in fscKvmS3TrapObjectSessionIdentifier. | ||
| dsManagement | 1.3.6.1.4.1.10418.3.2 | |||
| fscKvmS3TrapObject | 1.3.6.1.4.1.10418.3.2.6 | |||
| STR fscKvmS3TrapObjectUserName | 1.3.6.1.4.1.10418.3.2.6.1 | UTF8String | not-accessible | This object is sent in a trap to identify the name of the user for which the trap condition occured. If the trap condition occurred as a result of activity on the local port (OSD), then the value of this object will be the following string: local port |
| STR fscKvmS3TrapObjectTargetUserName | 1.3.6.1.4.1.10418.3.2.6.2 | UTF8String | not-accessible | This object is sent in a trap to identify the name of the target user for which a trap condition occurred. |
| STR fscKvmS3TrapObjectImageType | 1.3.6.1.4.1.10418.3.2.6.3 | UTF8String | not-accessible | This object is sent in a trap to identify the type of software image for which the trap condition occured. |
| STR fscKvmS3TrapObjectImageNewVersion | 1.3.6.1.4.1.10418.3.2.6.4 | UTF8String | not-accessible | This object is sent in a trap to identify the version of the new software image the appliance is being upgraded to. |
| STR fscKvmS3TrapObjectImageCurrentVersion | 1.3.6.1.4.1.10418.3.2.6.5 | UTF8String | not-accessible | This object is sent in a trap to identify the version of the software image that the appliance is currently running. |
| STR fscKvmS3TrapObjectImageUpgradeResults | 1.3.6.1.4.1.10418.3.2.6.6 | UTF8String | not-accessible | This object is sent in a trap to report the results of a TFTP image upgrade. |
| STR fscKvmS3TrapObjectSessionIdentifier | 1.3.6.1.4.1.10418.3.2.6.7 | UTF8String | not-accessible | This object is sent in a trap to identify the session for which the trap condition occurred. The value will be the name of a server if the server name is known, otherwise the value will be the connection path to a server. If the value is a connection path it will have the following format: KVM-IA i:Channel c Where i is the ID of the KVM-IA, and c is the cascade switch channel number (0 if there is no switch in the path). |
| STR fscKvmS3TrapObjectKvmIaId | 1.3.6.1.4.1.10418.3.2.6.8 | UTF8String | not-accessible | This object is sent in a trap to identify the KVM-IA for which the trap condition occurred. |
| STR fscKvmS3TrapObjectCascadeSwitchName | 1.3.6.1.4.1.10418.3.2.6.9 | UTF8String | not-accessible | This object is sent in a trap to identify the cascade switch for which the trap condition occurred. |
| STR fscKvmS3TrapObjectOldCascadeSwitchName | 1.3.6.1.4.1.10418.3.2.6.10 | UTF8String | not-accessible | This object is sent in a trap to identify the old name of a cascade switch whose name was changed. |
| STR fscKvmS3TrapObjectServerName | 1.3.6.1.4.1.10418.3.2.6.11 | UTF8String | not-accessible | This object is sent in a trap to identify the server for which the trap condition occurred. |
| STR fscKvmS3TrapObjectOldServerName | 1.3.6.1.4.1.10418.3.2.6.12 | UTF8String | not-accessible | This object is sent in a trap to identify the old name of a server whose name was changed. |
| STR fscKvmS3TrapObjectFileName | 1.3.6.1.4.1.10418.3.2.6.13 | DisplayString | not-accessible | This object is sent in a trap to identify the name of a file for which the trap condition occurred. |
| OCT fscKvmS3TrapObjectFirmwareCondition | 1.3.6.1.4.1.10418.3.2.6.14 | OCTET STRING | not-accessible | This trap message will contain data for application specific diagnostics. It is designed in provision for diagnostic help for installation-specific problems, would require the operator to install firmware provided to isolate their particular problems and to enable the trap to report conditions. The contents will be an Avocent Application Message Packet with the address, size, and command header removed. The parameters of the message will depend on the specific problem the firmware is designed to detect and report. |
| STR fscKvmS3TrapObjectDeviceId | 1.3.6.1.4.1.10418.3.2.6.15 | UTF8String | not-accessible | This object is sent in a trap to identify the device for which the trap condition occurred. |
| INT fscKvmS3TrapObjectAlarmCondition | 1.3.6.1.4.1.10418.3.2.6.16 | INTEGER | not-accessible | This object is sent in a trap to identify Warning/Alarm activity for the device on which the trap condition occurred. Alarm sets the alarm, OK indicates the condition has cleared up. |
| STR fscKvmS3TrapObjectAlarmDescription | 1.3.6.1.4.1.10418.3.2.6.17 | UTF8String | not-accessible | This object is sent in a trap to explain the Warning/Alarm condition for which the trap condition occurred. This is intended for display or logging. |
| STR fscKvmS3TrapObjectLockReason | 1.3.6.1.4.1.10418.3.2.6.18 | UTF8String | not-accessible | This object is sent in a trap to explain the reason for which a user account has been locked. |
| STR fscKvmS3TrapObjectUnlockReason | 1.3.6.1.4.1.10418.3.2.6.19 | UTF8String | not-accessible | This object is sent in a trap to explain the reason for which a user account has been unlocked. |
| STR fscKvmS3TrapObjectIPAddress | 1.3.6.1.4.1.10418.3.2.6.20 | DisplayString | not-accessible | This object is sent in a trap to identify the IP address for which a trap condition occurred. |
| KVM fscKvmS3TrapObjectKvmIaImageUpgradeResult | 1.3.6.1.4.1.10418.3.2.6.21 | KvmIaUpgradeResultsEnum | not-accessible | This object is sent in a trap to report the result of an KVM-IA image upgrade. |
| INT fscKvmS3TrapObjectTypeOfImage | 1.3.6.1.4.1.10418.3.2.6.22 | INTEGER | not-accessible | This object is sent in a trap to report the type of software image for which the trap condition occurred. |
| INT fscKvmS3TrapObjectVirtualMediaDriveAccessMode | 1.3.6.1.4.1.10418.3.2.6.23 | INTEGER | not-accessible | This object is sent in a trap to report the access mode associated with a remote virtual drive for which the trap condition occurred. |
| INT fscKvmS3TrapObjectVirtualMediaDriveType | 1.3.6.1.4.1.10418.3.2.6.24 | INTEGER | not-accessible | This object is sent in a trap to report the type associated with a remote virtual drive for which the trap condition occurred. |
| IMA fscKvmS3TrapObjectImageUpgradeResultsCode | 1.3.6.1.4.1.10418.3.2.6.25 | ImageFileUpgradeResultsEnum | not-accessible | This object is sent in a trap to report the results of a TFTP or ASMP image upgrade. |
RFC description
Manages KVM switch traps and firmware upgrade operations for Fujitsu Siemens systems.
Start monitoring Fujitsu Siemens/Avocent KVM-over-IP switch (KVM S3 series) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.