All MIBs › EXTREME-TRAP-MIB
Category: Alarm and Event Management, Domain: Fault Management, Vendor: Extreme Networks
Description: Extreme Networks MIB defining SNMP trap notifications for system events, interface changes, and hardware faults on Extreme devices.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is EXTREME-TRAP-MIB?
EXTREME-TRAP-MIB is an Extreme Networks vendor MIB dedicated to defining SNMP trap/notification objects for system events, interface state changes, and hardware faults across Extreme switching platforms. Rather than exposing pollable status tables itself, it defines the notification types an Extreme device can send, spanning system-level events, link up/down interface changes, and hardware fault conditions. Its monitoring value is realized passively through trap reception, alerting a management station in real time to hardware faults, interface flaps, or other system events rather than through active polling of sensor values. It is a vendor-specific notification MIB likely built to complement standard SNMPv2 notification conventions and Extreme's other device MIBs, rather than an independent IETF trap standard. It is typically deployed alongside other Extreme MIBs on Extreme switches so that an NMS can subscribe to and act on hardware/interface fault notifications in real time. Engineers can download the EXTREME-TRAP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in EXTREME-TRAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Extreme Networks Ethernet switch
Monitoring Examples
No specific trap object names were provided in the source extract, so specific notification names cannot be cited without invention. In general use, a management station would register to receive traps defined by this MIB covering events such as interface link-down or a hardware component fault, using the trap's variable bindings to identify the affected interface or component without needing to poll continuously.
What Can Be Monitored
- system event notifications
- interface state change traps
- hardware fault traps
Imported Objects
From EXTREME-EDP-MIB
| extremeEdpEntryAge | OBJECT-TYPE |
| extremeEdpNeighborId | OBJECT-TYPE |
| extremeEdpNeighborVlanIpAddress | OBJECT-TYPE |
| extremeEdpNeighborVlanName | OBJECT-TYPE |
| extremeEdpPortIfIndex | OBJECT-TYPE |
From EXTREME-ESRP-MIB
| extremeEsrpActivePorts | OBJECT-TYPE |
| extremeEsrpGroup | OBJECT-TYPE |
| extremeEsrpInternalActivePorts | OBJECT-TYPE |
| extremeEsrpNetAddress | OBJECT-TYPE |
| extremeEsrpState | OBJECT-TYPE |
| extremeEsrpTrackedActivePorts | OBJECT-TYPE |
| extremeEsrpTrackedIpRoutes | OBJECT-TYPE |
From EXTREME-SYSTEM-MIB
| extremeCurrentTemperature | OBJECT-TYPE |
| extremeFanNumber | OBJECT-TYPE |
| extremePowerSupplyNumber | OBJECT-TYPE |
| extremeSlotModuleConfiguredType | OBJECT-TYPE |
| extremeSlotModuleInsertedType | OBJECT-TYPE |
| extremeSlotModuleState | OBJECT-TYPE |
| extremeSlotNumber | OBJECT-TYPE |
From EXTREME-VLAN-MIB
| extremeVlanIfDescr | OBJECT-TYPE |
| extremeVlanIfIndex | OBJECT-TYPE |
From IF-MIB
| ifAlias | OBJECT-TYPE |
From RFC1155-SMI
| enterprises |
From RFC1213-MIB
| ifDescr | |
| ifPhysAddress | |
| sysDescr | |
| sysUpTime |
From SNMPv2-SMI
| NOTIFICATION-TYPE |
OIDs
RFC description
Enterprise-specific trap definitions for Extreme Networks devices, extending RFC 1215 conventions. Contains trap notifications for monitoring and alerting events on Extreme network equipment.
Start monitoring Extreme Networks Ethernet switch (system/interface/hardware fault traps) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.