All MIBs › JUNIPER-SOAM-PM-MIB › jnxSoamPmMepSlmSingleEndedResponder
jnxSoamPmMepSlmSingleEndedResponder
Module: JUNIPER-SOAM-PM-MIB
OID (symbolic): JUNIPER-SOAM-PM-MIB::jnxSoamPmMepSlmSingleEndedResponder
OID (numeric): 1.3.6.1.4.1.2636.3.78.1.1.1.1.3
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-only
Description: This object specifies whether the Synthetic Loss Measurement (SLM) single-ended Responder is enabled. The value 'true' indicates the single-ended SLM Responder is enabled and if a SLM message is received a SLR will be sent in reply. The value 'false' indicates the single-ended SLM Responder is disabled. If a SLM message is received no response will be sent and the message will be discarded. This object needs to be persistent upon reboot or restart of a device. A MEP can be both a single-ended Responder and Controller simultaneously.
What is jnxSoamPmMepSlmSingleEndedResponder?
Enables or disables single-ended Synthetic Loss Measurement (SLM) responder behavior on this MEP: when true the MEP automatically replies with an SLR whenever it receives an SLM message; when false incoming SLM probes get no response.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.1.1.1.3 snmpwalk -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamPmMepSlmSingleEndedResponder
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.1.1.1.3.1 snmpget -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamPmMepSlmSingleEndedResponder.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> jnxSoamPmMepSlmSingleEndedResponder.1
Start monitoring Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-SOAM-PM-MIB::jnxSoamPmMepSlmSingleEndedResponder OID value, configure state conditions and alerts, and monitor any Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.78 | jnxSoamPmMib | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1 | jnxSoamPmMibObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.1 | jnxSoamPmMep | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.1.1 | jnxSoamPmMepTable | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.1.1.1 | jnxSoamPmMepEntry | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.1.1.1.3 | jnxSoamPmMepSlmSingleEndedResponder | JUNIPER-SOAM-PM-MIB |