All MIBs › JUNIPER-SOAM-PM-MIB › jnxSoamLmHistoryStatsIndex
jnxSoamLmHistoryStatsIndex
Module: JUNIPER-SOAM-PM-MIB
OID (symbolic): JUNIPER-SOAM-PM-MIB::jnxSoamLmHistoryStatsIndex
OID (numeric): 1.3.6.1.4.1.2636.3.78.1.2.4.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The index for the Measurement Interval within this PM session.
Measurement Interval indexes are assigned sequentially by the SNMP Agent. The first Measurement Interval that occurs after the session is started is assigned index 1. Measurement Intervals for FLR (stored in this table) are based on iterator count and are indexed independently of Measurement Intervals for availability
Referential integrity is necessary, i.e., the index needs to be persistent upon a reboot or restart of a device. The index is never reused while this session is active until it wraps to zero. The index value keeps increasing up to that time.
What is jnxSoamLmHistoryStatsIndex?
The index of this archived Measurement Interval within the session's history; indexes are assigned sequentially starting at 1 as each interval completes, and this same value matched a jnxSoamLmCurrentStatsIndex while the interval was still in progress.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.2.4.1.1 snmpwalk -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamLmHistoryStatsIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.2.4.1.1.1 snmpget -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamLmHistoryStatsIndex.1
Start monitoring Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-SOAM-PM-MIB::jnxSoamLmHistoryStatsIndex OID value, configure state conditions and alerts, and monitor any Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.78 | jnxSoamPmMib | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1 | jnxSoamPmMibObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2 | jnxSoamPmLmObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.4 | jnxSoamLmHistoryStatsTable | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1 | jnxSoamLmHistoryStatsEntry | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.4.1.1 | jnxSoamLmHistoryStatsIndex | JUNIPER-SOAM-PM-MIB |