All MIBs › JUNIPER-SOAM-PM-MIB › jnxSoamLmCfgStartTimeType
jnxSoamLmCfgStartTimeType
Module: JUNIPER-SOAM-PM-MIB
OID (symbolic): JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgStartTimeType
OID (numeric): 1.3.6.1.4.1.2636.3.78.1.2.1.1.15
Node type: OBJECT-TYPE
Type: JnxSoamTcOperationTimeType
Access: read-only
Description: This object specifies the type of start time of the SOAM LM session. The start time can be disabled (none), immediate, relative, or fixed.
The value of 'none' is illegal and a write error will be returned if this value is used.
The value of 'immediate' starts the SOAM LM session when the jnxSoamLmCfgEnabled is true.
The value of 'fixed' starts the SOAM LM session when the jnxSoamLmFixedStartDateAndTime is less than or equal to the current system date and time and jnxSoamLmCfgEnabled is true. This value is used to implement an On-Demand fixed time PM session.
The value of 'relative' starts the SOAM LM session when the current system date and time minus the jnxSoamLmRelativeStartTime is greater than or equal to the system date and time when the jnxSoamLmStartTimeType object was written and jnxSoamLmCfgEnabled is true. This value is used to implement an On-Demand relative time PM session.
This object can only be written at row creation time and cannot be modified once it has been created.
What is jnxSoamLmCfgStartTimeType?
Controls how this Loss Measurement session's start time is scheduled: none (illegal, rejected on write), immediate (starts as soon as jnxSoamLmCfgEnabled is set true), relative (starts jnxSoamLmCfgRelativeStartTime after being enabled), or fixed (starts at the specific jnxSoamLmCfgFixedStartDateAndTime).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.2.1.1.15 snmpwalk -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgStartTimeType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.78.1.2.1.1.15.1 snmpget -v2c -c public <target> JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgStartTimeType.1
Start monitoring Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-SOAM-PM-MIB::jnxSoamLmCfgStartTimeType OID value, configure state conditions and alerts, and monitor any Juniper router/switch, carrier Ethernet demarcation/aggregation device (SOAM performance monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.78 | jnxSoamPmMib | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1 | jnxSoamPmMibObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2 | jnxSoamPmLmObjects | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.1 | jnxSoamLmCfgTable | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1 | jnxSoamLmCfgEntry | JUNIPER-SOAM-PM-MIB |
| 1.3.6.1.4.1.2636.3.78.1.2.1.1.15 | jnxSoamLmCfgStartTimeType | JUNIPER-SOAM-PM-MIB |